Database Users

[Q] Failed Custom Recovery Update w/ Dandroid 4.4

Phone: Samsung Galaxy S4 ATT I337UCUAMDL
Model Number in settings on 4.4 ROM = GT-I9505G
As the title says, I installed dandroid's newest 4.4 ROM from WICKED v5 4.2.2 and lost root. So I attempted to update my CWM Recovery from Odus 1x to the newest using Odin which failed do to write protected I suppose all though others says that doesnt effect their installs.
Where I'm at:
Cannot boot into recovery, says booting recovery the just reboots and enters Dandroid's ROM w/o root.
I'm now lost and have been reading the forums for hours. Currently downloading STOCK Samsung firmware for my device I337UCUAMDL_I337ATTAMDL_ATT.zip
CASUAL failed.
What do I need to do to get back to WORKING custom recovery w/ rooted dandriod 4.4 kitkat rom. Should I use Odin and flash stock rom then motochopper to root and try to reinstall working CWM recovery?
Please advise best course of action. My phone had been working properly with every ROM I tried before update to 4.4 ROM and attempted CWM recovery update (thinking that would fix my root issue). Thanks all!

If you have a nandroid, and I hope you do, just restore that in your custom recovery. If you don't, then you're going to have to return to stock with odin

Tried motochopper on the phone as it sits and it fails as well.
I have a stock backup but the problem is I no longer have access to any recovery. Guess I'm just gonna have to flash the stock firmware with Odin when its finished downloading and start over.

Just finished Odin flash back to samsung factory firmware. Phone stuck at att world logo on bootup, still can't access recovery. Any ideas?

GSXRspike said:
Just finished Odin flash back to samsung factory firmware. Phone stuck at att world logo on bootup, still can't access recovery. Any ideas?
Click to expand...
Click to collapse
If you flashed Odin successfully you can get into recovery.

Finally got into recovery it rebooted 3 times but just holding the req. buttons finally got me in.
Back on factory firmware and rooted w/ cwm recovery all back in place properly worrking.
I would like to use the Dandroid 4.4 ROM with this device. When I install am I going to lose root again and if so, how I do I get it back on this device since the model in the settings is going to change from I337 to I9505G after installing this ROM?

Figured it all out last night, re-flashed Dandroid's latest ROM which still caused me to loose root, then flashed SuperSU 1.51 instead of 1.80 and regained root. All is right in the world now.

GSXRspike said:
Figured it all out last night, re-flashed Dandroid's latest ROM which still caused me to loose root, then flashed SuperSU 1.51 instead of 1.80 and regained root. All is right in the world now.
Click to expand...
Click to collapse
Hey, if you dont mind me asking where did you get the 1.51 zip to flash? I'm having a similar issues with same ROM where i lost root but have recovery access.
Thanks
Update: Found the file. Flashed it. Root is back. Have you let market update it automatically? If so did you lose root afterwords?

[Q] SafeStrap Installs Recovery In 4.3 But wont boot into it

I am on MK2 4.3 and I have Safestrap installed and I installed the recovery and when I reboot into recovery It goes to the Custom screen then it fails to Go to the Splash screen where I can choose to go into TWRP . I had this working on MF3 but I had bricked my phone and and had to flash the allin one to fix it . I am successfully rooted with safestrap installed .. ANY IDEAS would be greatly appreciated...Thanks By the way it Says Safe system : Not Active. I thought I remember it saying Active before
Also is there another way to install a Recovery. Im coming from a Tmobile GS2 where you could flash recovery once within Odin and after that you could just flash different versions of Twrp or Cwm when needed. No locked boot loader . I always thought HTC was the only phones with locked boot loaders . I have been doing a lot of reading prior to posting this question and have been up all night . After bricking last night and recovering from it I got a crash course with this device.

spirodave said:
I am on MK2 4.3 and I have Safestrap installed and I installed the recovery and when I reboot into recovery It goes to the Custom screen then it fails to Go to the Splash screen where I can choose to go into TWRP . I had this working on MF3 but I had bricked my phone and and had to flash the allin one to fix it . I am successfully rooted with safestrap installed .. ANY IDEAS would be greatly appreciated...Thanks By the way it Says Safe system : Not Active. I thought I remember it saying Active before
Also is there another way to install a Recovery. Im coming from a Tmobile GS2 where you could flash recovery once within Odin and after that you could just flash different versions of Twrp or Cwm when needed. No locked boot loader . I always thought HTC was the only phones with locked boot loaders . I have been doing a lot of reading prior to posting this question and have been up all night . After bricking last night and recovering from it I got a crash course with this device.
Click to expand...
Click to collapse
Check your root condition is valid. If you do not have root you can not install the safestrap recovery.
To go to the safestrap you do not need to reboot into the recovery. You simply reboot as normal and safestrap splash screen would come up.
You can use odin to flash the recovery in the download mode or you can use adb command to push the recovery.
AT&T and verizon G4 bootloaders are locked. You can not unlock like HTC S-off. You can only exploit the bootloader with different methods based on your firmware version.

Simply reboot the phone and on boot up it will show you the splash screen. Not active means that stock slot is still selected.
Sent from my SGH-I337 running GPE using Tapatalk

sway8966 said:
Check your root condition is valid. If you do not have root you can not install the safestrap recovery.
To go to the safestrap you do not need to reboot into the recovery. You simply reboot as normal and safestrap splash screen would come up.
You can use odin to flash the recovery in the download mode or you can use adb command to push the recovery.
AT&T and verizon G4 bootloaders are locked. You can not unlock like HTC S-off. You can only exploit the bootloader with different methods based on your firmware version.
Click to expand...
Click to collapse
Im an idiot. I just realized I have been using the safestrap.apk I had on my sd that was for MF3. This will be my problem

jmjoyas said:
Simply reboot the phone and on boot up it will show you the splash screen. Not active means that stock slot is still selected.
Sent from my SGH-I337 running GPE using Tapatalk
Click to expand...
Click to collapse
Im an idiot. I just realized I have been using the safestrap.apk I had on my sd that was for MF3. This will be my problem..Problem solved.When you said the wrong slot was selected it made a light bulb light up in my head..Thanks bro

Did I brick it?

I was trying to remove the knox thing and now it won't go on beyond the Samsung Galaxy S5 custom screen. I have wiped, formated, ect... I have booted into the recovery mode (not safestrap because it does not boot that far. I have tried loading new NI2's NK2's, different kernals and nothing. When trying to load a new rom or kernel, I keep getting a red warnings that the footer is wrong and signature verification failed. Not sure where to go from here. I have gone through the forums and it's all running together now. HELP
Under Android system recovery it has the number KTU84P.G900VVRU1ANI2
I successfully loaded G900V_FirmwareOnly_NI2.tar.md5 with odin and then tried loading optimalrom 12.6 because it worked in the past, but I still get the failed message and the boot stops at the galaxy boot screen.
OK, loaded everything with Odin:
G900V_FirmwareOnly_NI2.tar.md5
G900V_ModemOnly_NI2.tar.md5
ALL_VZW_G900VVRU1ANI2_G900VVZW1ANI2_2525521_REV00_user_low_ship_MULTI_CERT.tar.md5
Now I have my phone back. Now I need to figure out if Knox is back and I need to try to do this again

gr8wing said:
I was trying to remove the knox thing and now it won't go on beyond the Samsung Galaxy S5 custom screen. I have wiped, formated, ect... I have booted into the recovery mode (not safestrap because it does not boot that far. I have tried loading new NI2's NK2's, different kernals and nothing. When trying to load a new rom or kernel, I keep getting a red warnings that the footer is wrong and signature verification failed. Not sure where to go from here. I have gone through the forums and it's all running together now. HELP
Under Android system recovery it has the number KTU84P.G900VVRU1ANI2
I successfully loaded G900V_FirmwareOnly_NI2.tar.md5 with odin and then tried loading optimalrom 12.6 because it worked in the past, but I still get the failed message and the boot stops at the galaxy boot screen.
OK, loaded everything with Odin:
G900V_FirmwareOnly_NI2.tar.md5
G900V_ModemOnly_NI2.tar.md5
ALL_VZW_G900VVRU1ANI2_G900VVZW1ANI2_2525521_REV00_user_low_ship_MULTI_CERT.tar.md5
Now I have my phone back. Now I need to figure out if Knox is back and I need to try to do this again
Click to expand...
Click to collapse
amazing how difficult people make things.. stock recovery will NOT flash custom roms.. if you are on fresh ni2 just odin the ncg kernal in odin, root, install SS and then odin ni2 kernal back.. now with ss installed, download the ROM you want and flash rom.zip in ss and the kernal for it if necessary..
Every custom rom on here is already knox free. Id recommend not trying to remove knox yourself again or else youll screw it up again from the sounds of it.. leave it to the devs to remove it lol.
On a side note, a brick is a phone that doesnt boot at all.. meaning it sits on a black screen and NOTHING at all boots. If you can get into recovery or dl mode then you most likely do not have a hard brick

elliwigy said:
amazing how difficult people make things.. stock recovery will NOT flash custom roms.. if you are on fresh ni2 just odin the ncg kernal in odin, root, install SS and then odin ni2 kernal back.. now with ss installed, download the ROM you want and flash rom.zip in ss and the kernal for it if necessary..
Every custom rom on here is already knox free. Id recommend not trying to remove knox yourself again or else youll screw it up again from the sounds of it.. leave it to the devs to remove it lol.
On a side note, a brick is a phone that doesnt boot at all.. meaning it sits on a black screen and NOTHING at all boots. If you can get into recovery or dl mode then you most likely do not have a hard brick
Click to expand...
Click to collapse
The issue I have been having is the /dev/uinput. I thought it was because of knox, but now I see it's more than that and nobody has made a work around yet. I may be mistaken, but I think I don't have a chance with the uinput.

gr8wing said:
The issue I have been having is the /dev/uinput. I thought it was because of knox, but now I see it's more than that and nobody has made a work around yet. I may be mistaken, but I think I don't have a chance with the uinput.
Click to expand...
Click to collapse
Youre doing too much.. supersu disables knox and uninstaling anything knox related is all you can do.. messing around with stuff you dont know about you WILL end up bricking your phone

gr8wing said:
I was trying to remove the knox thing and now it won't go on beyond the Samsung Galaxy S5 custom screen. I have wiped, formated, ect... I have booted into the recovery mode (not safestrap because it does not boot that far. I have tried loading new NI2's NK2's, different kernals and nothing. When trying to load a new rom or kernel, I keep getting a red warnings that the footer is wrong and signature verification failed. Not sure where to go from here. I have gone through the forums and it's all running together now. HELP
Under Android system recovery it has the number KTU84P.G900VVRU1ANI2
I successfully loaded G900V_FirmwareOnly_NI2.tar.md5 with odin and then tried loading optimalrom 12.6 because it worked in the past, but I still get the failed message and the boot stops at the galaxy boot screen.
OK, loaded everything with Odin:
G900V_FirmwareOnly_NI2.tar.md5
G900V_ModemOnly_NI2.tar.md5
ALL_VZW_G900VVRU1ANI2_G900VVZW1ANI2_2525521_REV00_user_low_ship_MULTI_CERT.tar.md5
Now I have my phone back. Now I need to figure out if Knox is back and I need to try to do this again
Click to expand...
Click to collapse
Where can I download the multi cert file?
ALL_VZW_G900VVRU1ANI2_G900VVZW1ANI2_2525521_REV00_ user_low_ship_MULTI_CERT.tar.md5
I have encountered the exact same problem.
Thanks.

robertb9657 said:
Where can I download the multi cert file?
ALL_VZW_G900VVRU1ANI2_G900VVZW1ANI2_2525521_REV00_ user_low_ship_MULTI_CERT.tar.md5
I have encountered the exact same problem.
Thanks.
Click to expand...
Click to collapse
Here you go!
https://www.androidfilehost.com/?fid=23622183712474060

Tulsadiver and gr8wing you guys are life savers! Thanks so much! I "ODINed" the firmware only, and then the modem only. after the phone downloaded each, it did not get past boot either time, but I was calm and hopeful. I odined the multi cert file and although it took a lot longer than I thought it would, it worked to perfection and my phone is fully functional and back to where it was two days ago.
I had NI2 rooted, then accidentally did the NK2 OTA update, which lost root. I finally got around to rerooting and decided to get rooted lollipop. I now have changed course and will sit happily with rooted NK2 kitkat.
Thanks!

[Q] Reflashed Stock w/ Odin, Still No Boot

Hello all,
I am looking for some advice, on getting my AT&T Samsung Galaxy S4 working again. I will keep this as short as I can:
I originally had 4.3 rooted with the MK2 firmware, and used Odin to flash my phone to 4.4 NB1, using the ROM in the Guide to Stock/Updating/Rooting thread.
This worked fine, and I was able to boot and use the phone, but my root access was gone.
I tried Towelroot, Kingo, etc... to no success.
I then followed http://forum.xda-developers.com/showthread.php?t=2692825 thread to semi downgrade to MK2 and was able to obtain root again. I also installed Safestrap recovery.
At this point I could not successfully boot back into the phone, though I could access Safestrap.
I flashed the stock kernel for NB1 again, but still could not boot.
I then flashed the stock NB1 ROM again.
After this, the phone would show the android icon and a progress bar, then restart, reach the Samsung load screen, start the AT&T load screen and then boot loop.
Once I reached this point, I could no longer access recovery, only download mode.
In my attempts since then. I've found if I stop the phone from ever getting to the Samsung load screen after flashing the stock ROM, I can then access recovery. As soon as I let it boot, I cannot access recovery.
I've flashed the stock ROM multiple times at this point, gotten into recovery and wiped the devices then rebooted multiple times.
I just don't know what else I can do.
Does anyone have any ideas? A place to look? Any help appreciated!

Phone Stuck On Splashscreen

My phone is a verizon gs5 SM-G900V and I tried to root it but something (I honestly have no idea) went wrong and now it is stuck on the splash screen. I have tried everything i thought of, doing a factory reset, clearing the cache partition, I tried reinstalling the stock rom using odin but of course because there was no root and the bootloader is locked, I can't reinstall. I tried applying updates using SD no dice. I am able to access the bootloader and the and the android recovery menu if that will help at all. I don't know every acronym/term because i'm still fairly new to these terms so any help will be greatly appreciated.

I'm guessing you are on lollipop because you say you can't downgrade to KitKat aka stock
so what you should do is go to Sammobile and download either lollipop official firmware bok3 or Pb1.
then install via odin in either ap or pda slot
with the phone in download mode after that wait for the Phone to boot then set it up
then use ok3 root method by Jr Kruse on xda it's a sticky in the s5 verizon forum to get root