Database Users

My X10 has no market, got from Dubai airport

Greetings,
I had a short visit to Dubai and I've bought an X10 from the airport on my way back home. I had it sealed and I opened it when I got back.
It was shocking that it had no android market and I am stuck with the phone and can't replace it.
I just want to have the firmware other than the one loaded to it that is specific for Dubai with no android market, I've been reading in this forum and I guess this process is called "rebranding" if I am correct? Please guide me to how to get android market on my handset because they do cheat people when they sell android handset without market application.

Hi.
You could follow steps 1 to 6 HERE which will "debrand" the phone, then run SEUS for the latest FW, or should you want to root the phone you could follow all the steps.

I've followed the instruction till step 6 then I ran SEUS but it says my phone is up to date. I didn't do step 7.
I have the market now showing up, I will try it and get back to you. But I am wondering why SUES gave me no updates?
My baseband version is 1.1.27 and my build number is R2BA023
Are these the latest versions?

I've used the market app and downloaded my first application. I am really thankful for your help.
I do have a question, before I do steps (from 1 to 6) my build version was R2BA024 and after I did all you said I am stuck with R2BA023, when I try SUES or OTA update it says my phone is up to date. What does this mean? I can't update my phone anymore?

plz Re-post the link
XperienceD said:
Hi.
You could follow steps 1 to 6 HERE which will "debrand" the phone, then run SEUS for the latest FW, or should you want to root the phone you could follow all the steps.
Click to expand...
Click to collapse
i have the same exact problem as HUNCH...BUt when the click on ur link im getting this message
Invalid Thread specified. If you followed a valid link, please notify the administrator
please repost the link...
n do tell can i update my phone after that using SEUS or not?
Thx in advance!

Download Flashtool with a generic firmware, flash it into your phone and enjoy your unbranded phone with the market. After flashing with Flashtool use SEUS to be sure everything is cleaned with a clean install with SEUS.

PlayGunsta said:
Download Flashtool with a generic firmware, flash it into your phone and enjoy your unbranded phone with the market. After flashing with Flashtool use SEUS to be sure everything is cleaned with a clean install with SEUS.
Click to expand...
Click to collapse
thanx a lot for the reply....but i have a few doubts
1) My phone's firmware is already 2.1-update 1 and build number is 2.1.A.0.435 should i still download it?
2) Is the FlashTool version 0.2.8 the latest version or i shud find the lastest version and download it?
3) So,if i flash my phone wat exactly will happen?Will i get android market in my phone now?
4)Should i back up my phone before doing this?
5)there is Slide me(sam 4.0) pre-installed?...does this remain?
6)wat is debranding? should i do it too?
7)Can i update my phone usind SEUS after this?
8) what do u suggest...should i just flash my phone or i should root it too and do the utilise the below options?
-install xRecovery, Busybox
- Clean your Rom (remove /system/apps apps of your choice)
- Clear dalvik cache
- Optimize (install of JIT v2)
- Customize (installs apps found in the custom/apps folder of the flashtool)
- Clean uninstalled (remove any references to system apps removed in the Clean (root needed) step)
- Edit /system/build.prop
Thx!
Thx!

evilmonk69 said:
thanx a lot for the reply....but i have a few doubts
1) My phone's firmware is already 2.1-update 1 and build number is 2.1.A.0.435 should i still download that firmware
2) Is the FlashTool version 0.2.8 the latest version or i shud find the lastest version and download it?
3) So,if i flash my phone wat exactly will happen?Will i get android market in my phone now? Can i update my my phone using SEUS or not?
4)should i back up my phone before doing this?
5)There is slide me market(sam 4.0) pre-installed...does this remain in my phone after this?
8) what do u suggest...should i just flash my phone or i should root it too and do the utilise the below options?
-install xRecovery, Busybox
- Clean your Rom (remove /system/apps apps of your choice)
- Clear dalvik cache
- Optimize (install of JIT v2)
- Customize (installs apps found in the custom/apps folder of the flashtool)
- Clean uninstalled (remove any references to system apps removed in the Clean (root needed) step)
- Edit /system/build.prop
Thx!
Click to expand...
Click to collapse
I don't know what you want to backup, but you could sync your contact/agenda etc with google. After that, download firmware .435 Generic and flash it into your phone. You will now have a unbranded device with market.
AFter doing that, you can optimize your ROM with Flashtool, install xRecovery, root etc... After the flashtool installation you will lose EVERYTHING. So be sure you back-up all important things.

PlayGunsta said:
I don't know what you want to backup, but you could sync your contact/agenda etc with google. After that, download firmware .435 Generic and flash it into your phone. You will now have a unbranded device with market.
AFter doing that, you can optimize your ROM with Flashtool, install xRecovery, root etc... After the flashtool installation you will lose EVERYTHING. So be sure you back-up all important things.
Click to expand...
Click to collapse
thank you for the quick reply...
sorry for being such a noob but i still have some doubts
is it enough if i use back up and restore application.
n Just to be sure after this process can i use SEUS to update my phone regularly?
n how different is debranding from flashing?

evilmonk69 said:
thank you for the quick reply...
sorry for being such a noob but i still have some doubts
is it enough if i use back up and restore application.
n Just to be sure after this process can i use SEUS to update my phone regularly?
n how different is debranding from flashing?
Click to expand...
Click to collapse
Back up and restore could be fine if it does backup everything you want.
Debranding means that your phone is not LIMITED to one provider with software updates. So when SE releases a firmware you will have to wait till your provider releases the firmware for you. But when you debrand you get updates from SE and not your provider.

evilmonk69 said:
thanx a lot for the reply....but i have a few doubts
1) My phone's firmware is already 2.1-update 1 and build number is 2.1.A.0.435 should i still download that firmware
2) Is the FlashTool version 0.2.8 the latest version or i shud find the lastest version and download it?
3) So,if i flash my phone wat exactly will happen?Will i get android market in my phone now? Can i update my my phone using SEUS or not?
4)should i back up my phone before doing this?
5)There is slide me market(sam 4.0) pre-installed...does this remain in my phone after this?
8) what do u suggest...should i just flash my phone or i should root it too and do the utilise the below options?
-install xRecovery, Busybox
- Clean your Rom (remove /system/apps apps of your choice)
- Clear dalvik cache
- Optimize (install of JIT v2)
- Customize (installs apps found in the custom/apps folder of the flashtool)
- Clean uninstalled (remove any references to system apps removed in the Clean (root needed) step)
- Edit /system/build.prop
Thx!
Click to expand...
Click to collapse
Well technically this isn't debranding because your phone is not carrier branded (It's just a generic UAE with no Market).
This is just switching to another region which has Android Market. But the way to do this is exactly the same as when debranding a phone.
Android Market isn't available in the UAE region.
So if you re-flash with another region and get market, and still using a SIM from the UAE I think it would block any content. But then you could root your phone and use Market Enabler to fake another carrier and get Android Market to work.
But since you "brought it home" I can say that reflashing it to another region will get you Android Market and it will work. You don't need to back up your UAE firmware when replacing it with another region firmware, and after you've flashed it with another region firmware SEUS or PCC will always flash to that region firmware.
If you flash to another region you won't have SlideMe Market, because all other region firmwares all have access to Android Market and therefor comes with Android Market pre-installed instead.
I remember when the first 2.1.A.0.435 build was released, that was to UAE it had no Market so I made a xRecovery fix package to get Android Market on it.
But would suggest you to flash another region firmware instead of this, because then when you flash with SEUS or PCC again in the future you would miss Android Market again.
You can find the latest firmwares here (don't use the AT&T but go for the one below called 2.1.B.0.1)
http://forum.xda-developers.com/showpost.php?p=11038646&postcount=1
Sony Ericsson said:
The Android Market is not supported in the UAE. This is due to the fact that Google has not had the necessary agreements with the Regulatory bodies as yet. This is fully controlled and managed by Google. Sony Ericsson will be offering Slide Me which is an alternative to Android market in the UAE.
Click to expand...
Click to collapse

PlayGunsta said:
Back up and restore could be fine if it does backup everything you want.
Debranding means that your phone is not LIMITED to one provider with software updates. So when SE releases a firmware you will have to wait till your provider releases the firmware for you. But when you debrand you get updates from SE and not your provider.
Click to expand...
Click to collapse
So,should i just flash my phone or debrand it too?

arkedk said:
Android Market isn't available in the UAE region.
So if you debrand it and get market, and still using a SIM from the UAE I think it would block any content. But then you could root your phone and use Market Enabler to fake another carrier and get Android Market to work.
But since you "brought it home" I can say that reflashing it to another region will get you Android Market and it will work. You don't need to back up your UAE firmware when replacing it with another region firmware, and after you've flashed it with another region firmware SEUS or PCC will always flash to that region firmware.
If you flash to another region you won't have SlideMe Market, because the all other region firmwares all have access to Android Market and therefor comes with Android Market pre-installed instead.
I remember when the first 2.1.A.0.435 build was released, that was to UAE it had no Market so I made a xRecovery fix package to get Android Market on it.
But would suggest you to flash another region firmware instead of this, because then when you flash with SEUS or PCC again in the future you would miss Android Market again.
You can find the latest firmwares here (don't use the AT&T but go for the one below 2.1.B.0.1)
http://forum.xda-developers.com/showpost.php?p=11038646&postcount=1
Click to expand...
Click to collapse
Thank you so much!!!....i live in india
So, i can just flash(no need to debrand) to other region without worrying rite?

evilmonk69 said:
So,should i just flash my phone or debrand it too?
Click to expand...
Click to collapse
Just ******* flash a generic firmware as said many times before and you won't be limited by a region.

PlayGunsta said:
Just ******* flash a generic firmware as said many times before and you won't be limited by a region.
Click to expand...
Click to collapse
He is on Generic firmware just so you know.
It's just Generic firmware that does not contain Android Market.

PlayGunsta said:
Just ******* flash a generic firmware as said many times before and you won't be limited by a region.
Click to expand...
Click to collapse
sorry for being such a pain in the arse...but one last question
which generic firmware do u suggest?

evilmonk69 said:
sorry for being such a pain in the arse...but one last question
which generic firmware do u suggest?
Click to expand...
Click to collapse
You're not a pain in the arse. Some people are just immature.
As said before 2.1.B.0.1 is the latest.
http://forum.xda-developers.com/showthread.php?t=936733
Direct Download:
http://www.multiupload.com/3GT0KKFMXP

arkedk said:
You're not a pain in the arse. Some people are just immature.
As said before 2.1.B.0.1 is the latest.
http://forum.xda-developers.com/showthread.php?t=936733
Direct Download:
http://www.multiupload.com/3GT0KKFMXP
Click to expand...
Click to collapse
Thank you..thank you ...thank you!!!!

I'm watching this , chill out.

does 2.1.B.0.1include DT?
thanx for 2.1.B.0.1.It works great...
Just wondering does 2.1.B.0.1 have Dual touch

[HOW-TO] How to GET Lollipop 5.1.1 to your G920F

Here you can find the tar file 5.1.1
BE AWARE You can't root it or install twrp due to new bootloader​
Hello to EVERYONE!!!
Here a guide on how to receive 5.1.1 (G920F ONLY)​
1.Download this firmware
2.Install it via odin
3.Reboot to recovery
4.Wipe data twice
5.Wipe cache
6.Reboot
7.Check for updates
8.VOILA
Don't forget to press the Thanks button​

Can you give more informations on which firmware it is ... what dose it really do ... and if I have a phone with one csc code will it change ...
Sent from my SM-G920F using XDA Free mobile app

Update on how to get the right CSC (XEF) for the 5.1.1. update to show up
Here is how to change the CSC code to XEF (absolutely needed in order to get the 5.1.1. update)
- install & root with your preferred way ( [ROOT] PingPongRoot ***S6 & S6 Edge Root Tool*** or CF-Auto-Root
- install Phone INFO ★Samsung★ (paid version). Now in order to make the "Change CSC" option you will need to update the Superuser to "Superuser v2.49"
Here is how to update the SuperSU:
- Download the zip file at http://download.chainfire.eu/740/SuperSU/BETA-SuperSU-v2.49.zip
- Extract and get the Superuser.apk file from the 'common' folder inside it.
- Install Superuser.apk, it will ask to update the binaries to the latest version. Let it update.
- Reboot the phone.
One of the users noted (related to using the tool Phone INFO ★Samsung★ (paid version) to change the CSC code) that: "I finally changed the CSC with this steps: rooted with Ping Pong, installed Phone Info (thank you for this app), and SuperSu 2.94, changed CSC, error on Recovery, Wipe data factory reset in Recovery, flashed the phone with Odin. Tested with 2 G925F phones."
I can confirm I followed the same procedure and it worked!
View attachment 3373797

dehnhaide said:
Here is how to change the CSC code to XEF (absolutely needed in order to get the 5.1.1. update)
- install & root with your preferred way ( [ROOT] PingPongRoot ***S6 & S6 Edge Root Tool*** or CF-Auto-Root
- install Phone INFO ★Samsung★ (paid version). Now in order to make the "Change CSC" option you will need to update the Superuser to "Superuser v2.49"
Here is how to update the SuperSU:
- Download the zip file at http://download.chainfire.eu/740/SuperSU/BETA-SuperSU-v2.49.zip
- Extract and get the Superuser.apk file from the 'common' folder inside it.
- Install Superuser.apk, it will ask to update the binaries to the latest version. Let it update.
- Reboot the phone.
One of the users noted (related to using the tool Phone INFO ★Samsung★ (paid version) to change the CSC code) that: "I finally changed the CSC with this steps: rooted with Ping Pong, installed Phone Info (thank you for this app), and SuperSu 2.94, changed CSC, error on Recovery, Wipe data factory reset in Recovery, flashed the phone with Odin. Tested with 2 G925F phones."
I can confirm I followed the same procedure and it worked!
View attachment 3373797
Click to expand...
Click to collapse
This method that I have written does not need root

Screenshots

Deleted.

zdravkodubravec said:
Can you give more informations on which firmware it is ... what dose it really do ... and if I have a phone with one csc code will it change ...
Sent from my SM-G920F using XDA Free mobile app
Click to expand...
Click to collapse
You only goal to get 5.1.1 is to change csc
Here is a guide that you can do that without loosing waranty

t-shock said:
Hello to EVERYONE!!!
Here a guide on how to receive 5.1.1 (G920F ONLY)​
1.Download this firmware
2.Install it via odin
3.Reboot to recovery
4.Wipe data twice
5.Wipe cache
6.Reboot
7.Check for updates
8.VOILA
Don't forget to press the Thanks button​
Click to expand...
Click to collapse
Hi man. If I am on Build Number: G920FXXU1AOCV, my start screen with Telekom ( I have waranty) will disapear after flashing your rom? I must do the "Emergency software recovery and initialization" with Smart Switch before flashing this with Odin to not get the bootloop problem? What is the problem with CSC and waranty?
Thanx!

A bit of attention.
t-shock said:
This method that I have written does not need root
Click to expand...
Click to collapse
Read my post twice. In order to be able to get the 5.1.1. (at least for now) you need the XEF CSC (France). If others can confirm that they can get 5.1.1. without the XEF CSC that indeed an update / downgrade to your suggested firmware (an other as well) will work just fine. Until then CSC change is needed in such procedure requires root (unfortunately)

*#272*IMEI# to change CSC

t-shock said:
You only goal to get 5.1.1 is to change csc
Here is a guide that you can do that without loosing waranty
Click to expand...
Click to collapse
Rooting with Ping Pong will not trip Knox, so you will not lose warranty.

I think they should have one version of firmware for all ..or even one s6 and one s6 edge ...not so many variants. ..
Sent from my SM-G920F using XDA Free mobile app

New bootloader blocks downgrading, be careful installing 5.1.1 OTA!
Kernel built after May 15th (including some 5.0.2 and all 5.1.1) have PingPong xploit fixed. Be cautious when installing OTA these days and FlashFire might be your best shot of upgrading systems. i do not recommend to install 5.1.1.

This guide does not offer a guarantueed, immediate update. It simply does flash a French firmware, since this is the first EU country to receive OTA for G920F, which is fine. BUT the way updates are, they will not come to everyone immediately. So it can last up to a week, before the OTA finally arrives and you should tell guys, before they are forced to setup their S6 from scratch and end up frustrated.

he_stheone64 said:
This guide does not offer a guarantueed, immediate update. It simply does flash a French firmware, since this is the first EU country to receive OTA for G920F, which is fine. BUT the way updates are, they will not come to everyone immediately. So it can last up to a week, before the OTA finally arrives and you should tell guys, before they are forced to setup their S6 from scratch and end up frustrated.
Click to expand...
Click to collapse
OK, but from what I can tell the update is available for all the devices with that firmware via OTA; at the moment they are upgrading to 5.1.1. Why do you consider it can take a week?

llapao said:
OK, but from what I can tell the update is available for all the devices with that firmware via OTA; at the moment they are upgrading to 5.1.1. Why do you consider it can take a week?
Click to expand...
Click to collapse
Since this happens for all OTA`s, they are incremental. So some users get it on day 1, others on day 2, other even later. It`s like that since ages. Manufactureres use this careful way of rolling out upgrades to avoid issues, in case OTA includes a major bug.

he_stheone64 said:
This guide does not offer a guarantueed, immediate update. It simply does flash a French firmware, since this is the first EU country to receive OTA for G920F, which is fine. BUT the way updates are, they will not come to everyone immediately. So it can last up to a week, before the OTA finally arrives and you should tell guys, before they are forced to setup their S6 from scratch and end up frustrated.
Click to expand...
Click to collapse
I will agree with you but this method that I wrote worked perfectly for me (at least)

I did but, there is no update (The latest updates have already been installed).

rucci said:
I did but, there is no update (The latest updates have already been installed).
Click to expand...
Click to collapse
So .... i think we all need a bit patient and wait a bit .... it will come ... and even without 5.1.1 I think my s6 is great .....
Sent from my SM-G920F using XDA Free mobile app

zdravkodubravec said:
So .... i think we all need a bit patient and wait a bit .... it will come ... and even without 5.1.1 I think my s6 is great .....
Sent from my SM-G920F using XDA Free mobile app
Click to expand...
Click to collapse
maybe the best is to flash via odin a 5.1.1 ROM hihi
Enviado do meu SM-G920F através de Tapatalk

I have a Note 3. How can I get the latest android version?

I have 4.4.2 right now. How do I get the latest version? It's clearly not coming to me automatically.
I'm located in scandinavia btw.
And are there any benefits to upgrading right now? I'm pretty happy as things are to be honest

Andriante said:
I have 4.4.2 right now. How do I get the latest version? It's clearly not coming to me automatically.
I'm located in scandinavia btw.
And are there any benefits to upgrading right now? I'm pretty happy as things are to be honest
Click to expand...
Click to collapse
1. Install this APP and look for your CSC code (Pic 1).
2. Look for that 3 letters in "Select Country" -> HERE. It will tell you of what country is your device.
3. Download, unzip and flash via ODIN the latest firmware for your device (Pic 2).

Big big problem!

Hello everybody I'm new here. Please accept my apologies if this isn't the right thread section.
I have a big problem with my Samsung s7 edge at&t. I live at the moment in Europe and as you know I can't update my telephone. Is there a way to update my mobile? Thank you in advance and I have to warn you I'm not really into rooting etc etc but I must learn cause I want to get rid of this problem.
Thanks again

Darklight_93 said:
Hello everybody I'm new here. Please accept my apologies if this isn't the right thread section.
I have a big problem with my Samsung s7 edge at&t. I live at the moment in Europe and as you know I can't update my telephone. Is there a way to update my mobile? Thank you in advance and I have to warn you I'm not really into rooting etc etc but I must learn cause I want to get rid of this problem.
Thanks again
Click to expand...
Click to collapse
What firmware are you on? and which region?When i bought my phone i had the notification saying i needed to update. Are you sure you aren't on the latest update already?

Darklight_93 said:
Hello everybody I'm new here. Please accept my apologies if this isn't the right thread section.
I have a big problem with my Samsung s7 edge at&t. I live at the moment in Europe and as you know I can't update my telephone. Is there a way to update my mobile? Thank you in advance and I have to warn you I'm not really into rooting etc etc but I must learn cause I want to get rid of this problem.
Thanks again
Click to expand...
Click to collapse
Welcome to XDA. This is not Facebook. Use a clear and explanatory title. We don't need clickbait here.

Settings -> about device -> software info -> baseband version. Here u can see name of your build. Now go to sam mobile.com -> firmware -> write SM-g935f -> find latest nt&t build. If it is the same, u have the latest. If it's not, you can use odin.

The firmware should be the latest 6.0.1 but the Android security patch level is May...
fureedx said:
What firmware are you on? and which region?When i bought my phone i had the notification saying i needed to update. Are you sure you aren't on the latest update already?
Click to expand...
Click to collapse

Kubas_inko_CZ said:
Settings -> about device -> software info -> baseband version. Here u can see name of your build. Now go to sam mobile.com -> firmware -> write SM-g935f -> find latest nt&t build. If it is the same, u have the latest. If it's not, you can use odin.
Click to expand...
Click to collapse
I checked that and indeed is different. What should I do with Odin?

1. Download the newest firmware.
2. Download odin.
3. Unpack the zip file, don't touch the tar.md5 file.
4. Take that home.tar.md5 file and put it into PDA or HOME not sure which one newet odin has.
5. Reboot Your phone using vol down + home + power, now when You see a blueish screen press vol up to confirm, and then plug Your phone into Your computer.
6. Tap on Start on Your computer and wait until it finishes
Note: I'd recommed You to backup the data that You have on Your phone, Odin shouldn't format data nor internal storage but just in case it's better to be safe .

ProtoDeVNan0 said:
1. Download the newest firmware.
2. Download odin.
3. Unpack the zip file, don't touch the tar.md5 file.
4. Take that home.tar.md5 file and put it into PDA or HOME not sure which one newet odin has.
5. Reboot Your phone using vol down + home + power, now when You see a blueish screen press vol up to confirm, and then plug Your phone into Your computer.
6. Tap on Start on Your computer and wait until it finishes
Note: I'd recommed You to backup the data that You have on Your phone, Odin shouldn't format data nor internal storage but just in case it's better to be safe .
Click to expand...
Click to collapse
I can't find the model number of my telephone on the website you have suggested me... The model number is SM-G935A

No worries. Found it for You .
Link 1: http://www.sammobile.com/firmwares/download/102653/G935R4TYU4API5_G935R4USC4API5_USC/
This one is official but it's like universal USA firmware.
Link 2:
http://forum.xda-developers.com/att-s7-edge/how-to/firmware-att-s7-edge-g935a-official-t3412312
This one is for Your model. After flashing it You should get an update to get newest security patch.
First try the second link since it's the firmware made exactly for Your model .

I heard have verion tmobile or Verizon can install world rom and update OTA.

ProtoDeVNan0 said:
No worries. Found it for You .
Link 1: http://www.sammobile.com/firmwares/download/102653/G935R4TYU4API5_G935R4USC4API5_USC/
This one is official but it's like universal USA firmware.
Link 2:
http://forum.xda-developers.com/att-s7-edge/how-to/firmware-att-s7-edge-g935a-official-t3412312
This one is for Your model. After flashing it You should get an update to get newest security patch.
First try the second link since it's the firmware made exactly for Your model .
Click to expand...
Click to collapse
thank you very much

The problem now is how to install Odin on my macbook. I read that I need also to install this Heimdall file but it gives me an error and doesn't complete the installation.... Anyone can help me out with this?

Darklight_93 said:
Hello everybody I'm new here. Please accept my apologies if this isn't the right thread section.
I have a big problem with my Samsung s7 edge at&t. I live at the moment in Europe and as you know I can't update my telephone. Is there a way to update my mobile? Thank you in advance and I have to warn you I'm not really into rooting etc etc but I must learn cause I want to get rid of this problem.
Thanks again
Click to expand...
Click to collapse
Have You tried to use smart switch ?

marshmallow OTA update

I have 5.5.1 android on my note 4. Phone is not rooted. I read on google that this phone have marshmallow update from last year. When I go to system update > check ,i dont get update for my phone. I check model number and for this model is available update. What should i do? How to update my phone over the air?

jjoeshua said:
I have 5.5.1 android on my note 4. Phone is not rooted. I read on google that this phone have marshmallow update from last year. When I go to system update > check ,i dont get update for my phone. I check model number and for this model is available update. What should i do? How to update my phone over the air?
Click to expand...
Click to collapse
If its not letting you I don't think you can. Just try to get on PC and update through samsung kies.

You can also go on sammobile.com and download the latest software/firmware and ODIN it to your phone. Instructions are right on the website as well as the latest ODIN software.
Andrew

I just found out that my phone is rooted. I just buy a rooted phone. I dont have idea have is that posible but it rooted. I dont have install TWRP.
Maybe i dont have update because of root?

jjoeshua said:
I just found out that my phone is rooted. I just buy a rooted phone. I dont have idea have is that posible but it rooted. I dont have install TWRP.
Maybe i dont have update because of root?
Click to expand...
Click to collapse
Correct root=no ota

I dont know what happened but when I check root again after two hours i got this:

so is it any better than the last MM update?

I checked and i dont have OTA marshmallow. .i dont have pc to try with samsung kies

i have installed it on my EUR phone and it flies as a first impression , security patch update august 2018 though. will report battery life later in the week

Can i change something in phone to get update? Why is happening this? Why i dont have update OTA? Does anyone have this problem and how is fixed? My big problem is that i dont have pc..

If your phone is rooted there may be a program that disables the update applications (com.samsung.sdm and com.samsung.sdmviewer if I remember correctly). What applications (other than stock) are on the phone, such as titanium backup, app quarantine, etc.
Now if someone rooted the phone to make it work with your phone network or other software you use this update may disable the phone and/or software requiring root.
Andrew

I dont have any app in phone that need root for working.
I found and install this SDM but i need a phone to connect with..
can you give ne a little more explanation of this app? What do i need to do when I install it?

I dont have anyone app in phone that need root to work.
Can you give me a litlle more explanation abot this SDM, i found and install it on phone but..i dont know how to use it

Was it not already on the phone? This app automatically checks for OTA updates and downloads them.
You can open settings, scroll all the way down to the 'system' section, click on 'system updates' and then select 'check for updates'. Just make sure you have mobile data connection of some kind. (Cell or Wifi).
SDM should be installed on the phone unless someone specifically removed it. Of course be careful what you download and install. Lots of malicious software out there... If you had the ability to see the 'system update' option in settings, you already had the com.samsung.sdm package and did not need to install anything.
Was this phone sold by your carrier/provider originally or is it one you bought online and was made to work with your carrier/provider?

It is from provider Tmobile.
I give my phone to service provider and pay 10€ and thay put 6.0.1 marshmallow to my phone.
When i get back to my home,I get info that I can update android.
I have download the update, 300mb but when i try to install it,i cant. I get some update error.
Does anyone know what is this update? And how to install it? I have download a couple of times but its always the same. Can not update.
I finally have Marshmallow 6.0.1, but I cant install this next update.

just flashed the latest firmware for your model (from sammobile) via odin in download mode and your would be able to get OTA update easily ...........

I did it ,i have found tmobile firmware, I will try with another one

piku2008 said:
just flashed the latest firmware for your model (from sammobile) via odin in download mode and your would be able to get OTA update easily ...........
Click to expand...
Click to collapse
Can I change the firmware , can I download and flash sm-n910f ,thats firmware for Europe,can I install it?
I want to change this sm-n910t to sm-n910f, is that posible?
I dont wont to have tmobile firmware,I just want firmware without brand or provider?
What will happend if I change model?

jjoeshua said:
Can I change the firmware , can I download and flash sm-n910f ,thats firmware for Europe,can I install it?
I want to change this sm-n910t to sm-n910f, is that posible?
I dont wont to have tmobile firmware,I just want firmware without brand or provider?
What will happend if I change model?
Click to expand...
Click to collapse
you can change hardware models via flashing other models firmware ......