Database Users

Cannot update Galaxy Tab !

This morning connected my Galaxy Tab to KIES and it prompted that there is an update !!
it took ages to download its binary files then finally after it got done, it gave me a decryption error !!
I have changed my sales code to gain access to market, could this be the problem or do i redownload the files !!
Isn't there a way to UPGRADE fw via OTA? or placing update.zip in root of sd nd flashing from recovery? (similar to HTC devices)
how do I upgrade to the latest version? help please
Cheers
Jackie
PS: Please find attached the firmware code : current and new !

Are you UK based Jackie? Just guessing as you said cheers! I've seen nothing this morning though have read there was an Android Market update which I had already downloaded and applied, maybe why I'm seeing no update.

no I'm based in UAE !! that's just teh way I speak !!

Ah right, nice to read it all the same, Cheers!

so anyone has any idea?

Jackie,
I don't bother with Kies.... It put my SGS in a right mess and couldn't be used until I sorted it out with another ROM and a different PC software upgrader by the name of Odin.
Your best bet is to go on over to samfirmware.com and check out the latest ROM's available.
I'm sending you also a link which although was written for the SGS and Froyo it's still relevant for ROM files for the Tab and how to use Odin.
See here:- How to use Odin to Upgrade the SGS to Froyo

Beards said:
Jackie,
I don't bother with Kies.... It put my SGS in a right mess and couldn't be used until I sorted it out with another ROM and a different PC software upgrader by the name of Odin.
Your best bet is to go on over to samfirmware.com and check out the latest ROM's available.
I'm sending you also a link which although was written for the SGS and Froyo it's still relevant for ROM files for the Tab and how to use Odin.
See here:- How to use Odin to Upgrade the SGS to Froyo
Click to expand...
Click to collapse
How do I know which is the latest ROM is for my TAB !
I checked out samfirmware, but it has loads of firmwares !
I'll check out what to do with ODIN though !
Thanks a lot
Cheers

jackie_jagger said:
How do I know which is the latest ROM is for my TAB !
I checked out samfirmware, but it has loads of firmwares !
I'll check out what to do with ODIN though !
Thanks a lot
Cheers
Click to expand...
Click to collapse
First, what ROM version do you currently have installed?
Next, look at the list of ROM's available see here.
You need to find out if you are on a European, Asian, Arabic, etc ROM and decide if you want to stay on that list or opt to another nation list.
For European lists JMA is the latest. There's a topic on JMA here.

PDA: P1000JPJJ2
Phone: P1000JXJJ1
CSC: P1000OJPJJ3
is what is being reported on *#1234# and samfirmware says this is the Arabic firmware and the latest for Arabic is P1000JVJL1 December 2010, not that I'm interested in any of the region specific apps - just wondering what has been fixed in these firmwares and also if flashing would delete all my data (I'm guessing it would)
I don't mind flashing a European firmware too, so which would be best?
PS: Tab is currently rooted with OCLF set ! =)
Cheers

Hi may i ask if you do firmware update does the tab have to be sim free not lock to a network as im on t-mobile uk, i dont want to brick my tab
thanks

jackie_jagger said:
PDA: P1000JPJJ2
Phone: P1000JXJJ1
CSC: P1000OJPJJ3
is what is being reported on *#1234# and samfirmware says this is the Arabic firmware and the latest for Arabic is P1000JVJL1 December 2010, not that I'm interested in any of the region specific apps - just wondering what has been fixed in these firmwares and also if flashing would delete all my data (I'm guessing it would)
I don't mind flashing a European firmware too, so which would be best?
PS: Tab is currently rooted with OCLF set ! =)
Cheers
Click to expand...
Click to collapse
It should not delete any data.
The browser and camera have been improved.
The browser now scrolls smoother.
The camera focus's much better.
No idea what other improvements have been made.
It does not really matter which firmware you wish to use BUT bear in mind a number of users who have performed a lagfix have had issues in upgrading the ROM.
You MUST ensure you remove any lagfix applied otherwise you stand a good chance in bricking the phone.
Also, ensure you have access to the Recovery and download mode.
You will need this if you 'brick' the phone.
ownhd2 said:
Hi may i ask if you do firmware update does the tab have to be sim free not lock to a network as im on t-mobile uk, i dont want to brick my tab
thanks
Click to expand...
Click to collapse
You need someone who is on a T-Mobile locked phone to answer this. I have heard of users on carrier networks who have run into issues.
Basically, unless you have a sound knowledge in what you are doing I would not attempt it until you get good solid advice.

seems like a long procedure, I'll hold off until i'm done with my exams....
also should I try KIES again? just in case ?? o.0

jackie_jagger said:
seems like a long procedure, I'll hold off until i'm done with my exams....
also should I try KIES again? just in case ?? o.0
Click to expand...
Click to collapse
You can try but I'd still make sure you have access to recovery and download first, just in case anything goes wrong.

Aight !! thanks a bunch !! will do

Got a similar problem... info says its P1000XXJID, valid euro firmware... Bought the tab in Hungary (Middle of europe), carrier free, and after looking at samfirmware.com's ROM list I was wondering about the updates.
Kies tells me this version can't be updated...
Can anyone help me with this problem?

Many, Many of us here in UK are having problems and are unsuccessful when trying to update/upgrade using Kies.
Hopefully Kies will get fixed properly to allow us all to use it.

ziffos said:
Many, Many of us here in UK are having problems and are unsuccessful when trying to update/upgrade using Kies.
Hopefully Kies will get fixed properly to allow us all to use it.
Click to expand...
Click to collapse
Even ActiveSync was better... at least it didn't offer the SW update...

to trick kies to update u could use kies registry patcher. I have sucsessfully updated via kies from jj3 -> jj7 (when no updates was availible)
read thru this post
http://forum.xda-developers.com/showthread.php?t=863386
Use the info from check fus and paste it in registry patcher, reboot pc - start kies - connect phone - something should happen.

Our friend: The chinese firmware

Dear All,
I have the following phone:
Model number: GT-I9100G
Android version: 2.3.5
Baseband version: I9100GZCKI1
Kernel Version: 2.6.35.7 [email protected]#2
Build Number: GINGERBREAD-ZCKI1
This phone is original bought in China Mainland, so, no google sync, no market, no Whatsapp... Even no useful GPS...
I was reading lot of posts and I decided to change my firmware into a european one...
I get the open europe version, download Odin, put in debug mode...
SOFT BRICK! (Now I know perfectly the meaning of this).
PANIC MODE ON!
Cold sweat running my back, ashtray full, 2:30 am... Nothing.
Next morning, after a hard night full of nightmares with my phone, I was searching information how to get it back... so I get the official chinese firmware.
Download again, use Odin, Start... NOTHING!
I was searching a JTAG service center in China when OMG, a clever malasian guy said:
"The secret to the sauce: The correct PIT file should have been included, and "re-partition" option is ticked and the correct PIT file for I9100G is as attached."
**I can't post the link**
(PS: THANK YOU VERY VERY VERY MUCH!!!!)
uffff! Saved.
As now I have the key to come back to the original status... Let's try other options...
I tried superoneclick: Blocked on step 7
I tried another post here suggesting use the I9100ZNKG5-ownhere-v1.2.4.Odin:Success, but, can't turn on. Stops at the beggining with our yellow triangle friend...
Oh, I've forget to say that I'm in china, so search and download firmwares is an epic task! hotfile, rapidshare and so on are blocked! At least I have a VPN, but I'm sure that not everyone have...
So now, what can I do? Is there any solution to take the chinese firmware out?
I was wondering maybe the .pit file is the solution to use ZNKG5... but I can't find it anywhere.
I have read another post from a Colombian guy (sorry, I don't have the link) that there is method changing the modem in a clockwork orange... really, too complicated to me.
My intention is keep a post with all the files needed to change the firmware if is possible.
You can put here your links and I will upload the files into chinese web storages, because the problem is from phones bought from China, so I guess people will be living in China...

I get the open europe version, download Odin, put in debug mode...
SOFT BRICK! (Now I know perfectly the meaning of this).
PANIC MODE ON!
Usual is not flashing G Model firmware but flashing i9100 firmware .
PIT files are dangerous do not use or repartition as that may brick your phone .
jje

So, can I use any firmware meanwhile is G version?
Maybe I've downloaded the not G one...
Well, try is worthy.

You need to use i9100g firmware, I9100 stuff will not work.
Now to root you can flash this kernel, http://forum.xda-developers.com/showthread.php?t=1369977
There is a custom rom for the i9100g, let me just find it and I will come back and link
Edit: rom http://forum.xda-developers.com/showthread.php?t=1374135
You can also check http://www.sammobile.com/firmware/ for stock unmodified roms, but make sure you use one for i9100g, that g is important, it's almost a totally different phone than the international version, only the name and screen are the same.
Sent from my GT-I9100 using Tapatalk

Veyka, Any Kernel is OK?
I mean, they are:
XXLA1
JPKK1
DZKL3
But my phone is chinese (GZCKI1)

Unkim said:
Veyka, Any Kernel is OK?
I mean, they are:
XXLA1
JPKK1
DZKL3
But my phone is chinese (GZCKI1)
Click to expand...
Click to collapse
To be honest I don't know that much about the i9100g, download your stock firmware, from sammobile or elsewhere, (I tried looking but the results where mostly in Chinese which I don't speak, sorry) so if the version you flash does not work you can jump back
Here is more info; http://forum.lowyat.net/topic/2068824/all
Also Google for checkfus as it should allow you to download the firmwares from Samsung.
Sent from my GT-I9100 using Tapatalk

FFS, G model has a different CPU do not use any NONE G firmware.
Chinese model has different signed boots which will reject any firmware which is NOT for the Chinese version.
Double Trouble
Take it back, go to a black market and buy the international version
or just enjoy the phone as it was meant to be.

But we are speaking about software right?
I mean, must be a way to change the boot right or something right?
And hope I could turn it back, but too late... And I'm sure that more people should be in the same situation.

Unkim said:
But we are speaking about software right?
I mean, must be a way to change the boot right or something right?
And hope I could turn it back, but too late... And I'm sure that more people should be in the same situation.
Click to expand...
Click to collapse
You could use JTAG and change the boots to the normal G version instead of the Chinese G boots.

Hey! I have the market on my phone! and Whatsapp!
As soon as I can link webs I will put all of the information!!!
Yujuuuuuuuuuuu!!!!
It's like have a new phone!

Ok, I can paste links.
I will upload the files and share them next week.

Ok!
As promised here are the files and guide about how to change your chinese i9100g into a "civilizated" phone:
STEP 0 (SECURITY COPY)
Make a security copy of your contacts, pictures, movies.... This process will delete EVERYTHING from your phone.
STEP 1 (ODIN)
Get Odin from below link and open it
http://www.wupload.com/file/2677120037/Odin3-v1.85.zip
STEP 2 (ROOT)
Download below link and root your phone with Odin.
http://www.wupload.com/file/2677118927/I9100G_ZCKH4_KERNEL_ROOT.tar
There are several guides on this forum about how to do but moreless is:
Take out the connection wire if you have it
Turn off your phone
Put it into download state (volume down+home+power)
Press volume up to confirm the download state
Turn on Odin
Connect the phone to the computer
on PDA use the KERNEL ROOT file that you have just downloaded
re-partition must be UNchecked
START
STEP 3 (ROM)
Download the link below and do the same procedure as above but in the PDA put the file you just have downloaded.
http://www.wupload.com/file/2677117442/I9100G_ZCKI1_MIC_03.tar
STEP 4 (WIFI & Yellow triangle on start up)
Download below link and same as before (Put this file on PDA and START).
http://www.wupload.com/file/2677119517/i9100G_ZCKI1_KERNEL.tar
Your phone will be in chinese as when you bought it. Just change the language.
ENJOY!!!
Oh, in case of failure or just "in case"...
Original firmware:
http://www.wupload.com/file/2677126677/I9100GZCKI1_I9100GZCKI1_I9100GOZHKI1.tar.md5
.Pit file to make it owrks:
http://www.wupload.com/file/2677120247/omap4_all_20110627_emmc.pit

Oh, now the problem is how to get a good GPS available in China, because google navigator can't work...
Suggestions are accepted!

Google navigation not work is normal , because only work in europe or usa , asia and hong kong can't use it

Unkim said:
Oh, now the problem is how to get a good GPS available in China, because google navigator can't work...
Suggestions are accepted!
Click to expand...
Click to collapse
http://c.autonavi.com/club/update/index.jsp?companyname=samsung

Google Nav doesn't work here in Taiwan either. C'mon guys, get rid of the evil Zhongunhai cabal!

downwiththebanksters said:
get rid of the evil Zhongunhai cabal!
Click to expand...
Click to collapse
lolwut?!
you can't see this text because I have hided it using the wonderful powers of bad english grammar.

BTW I now have a real solution to do CHN <> EUR without JTAG, lets see which box is now the first to add it If nothing happens by the time I am off vacation I will release it

Odia said:
BTW I now have a real solution to do CHN <> EUR without JTAG, lets see which box is now the first to add it If nothing happens by the time I am off vacation I will release it
Click to expand...
Click to collapse
Oh please please please become my personal hero and share your wisdom with the world! I can't wait to finally get rid of all the chinese BS on my phone!
Hope to hear from you soon, enjoy ur holiday!

Would flashing .pit file do any good? I bored of this censorship everywhere.
Sent from my GT-I9100G using XDA

Upgrading from Android 4.3 to 4.4.. How to?

Hi guys.
Wondered how i go about updating my galaxy s4 from Android 4.3 to Android 4.4?
Would it need rooting?
Thank you.
Just wanna add it is a Gi9505

MartK87 said:
Hi guys.
Wondered how i go about updating my galaxy s4 from Android 4.3 to Android 4.4?
Would it need rooting?
Thank you.
Just wanna add it is a Gi9505
Click to expand...
Click to collapse
Hi,
Are you talking about upgrade from stock 4.3 to stock 4.4.2? if so there is no need to root , just go to Sammobile.com find the rigght firmware and flash it ( Odin)

Thanks!
On SAM Mobile now.
How do i find out which country the phone belongs to along with knowing the correct firmware to get?
I should note i got the phone from Australia, however i cannot see Australia in the firmware list for GT-I9505.
Thanks
Just an update.
Not sure if its possible to flash to 4.4 because I've just been on SAMMobile.
Clicked on FIRMWARE
Then clicked Check Your Firmware.
Which i did. The phone is unlocked so i just chose vodafone.
Then it directs me to a 2013 update which is android 4.3.
So does that mean i can't get one for 4.4？

MartK87 said:
Thanks!
On SAM Mobile now.
How do i find out which country the phone belongs to along with knowing the correct firmware to get?
I should note i got the phone from Australia, however i cannot see Australia in the firmware list for GT-I9505.
Thanks
Just an update.
Not sure if its possible to flash to 4.4 because I've just been on SAMMobile.
Clicked on FIRMWARE
Then clicked Check Your Firmware.
Which i did. The phone is unlocked so i just chose vodafone.
Then it directs me to a 2013 update which is android 4.3.
So does that mean i can't get one for 4.4？
Click to expand...
Click to collapse
Hi mate ,
For Australia seems like the newest firmware is 4. 3 but you can flash a firmware from other " similar" countries like UK , check other countries that you may consider closer to yours
for example
BTU means unbranded
Model: GT-I9505
Model name: GALAXY S4 LTE
Country: United Kingdom
Version: Android 4.4.2
Changelist: 481100
Build date: Fri, 14 Feb 2014 03:15:30 +0000
Product Code: BTU
PDA: I9505XXUFNB9
CSC: I9505BTUFNE1
MODEM: I9505XXUFNB9
CSC: I9505BTUFNE1
Language is similar and if the modem gives you problems ( it should not) you can always flash ( odin) another the only thing you may lose would be maybe any specific carrier service that is on your current carrier rom you have in your phone and your CSC will be from UK ( in this case)

You can try installing Kies 3 Connecting your phone and see if it promotes an Update

Ok guys thank you.
So if i were to get the latest UK one. How likely is it my sim would still work in it?
I currently use vodafone in AU and uk also has vodafone. So would i be better off getting a vodafone uk firmware or just an unlocked one?
Cos the s4 is actually unlocked already.
If you could perhaps link me to the correct firmware id really appreciate it. I just really dont wanna screw this up.
Any info you require i can give you. I know for sure it is a GT-I9505 and that it was purchased unlocked in australia.
Thank you.

MartK87 said:
Ok guys thank you.
So if i were to get the latest UK one. How likely is it my sim would still work in it?
I currently use vodafone in AU and uk also has vodafone. So would i be better off getting a vodafone uk firmware or just an unlocked one?
Cos the s4 is actually unlocked already.
If you could perhaps link me to the correct firmware id really appreciate it. I just really dont wanna screw this up.
Any info you require i can give you. I know for sure it is a GT-I9505 and that it was purchased unlocked in australia.
Thank you.
Click to expand...
Click to collapse
Hi,
Sim will work ok
Your choice vodafone or unbranded should be fine ( unbranded is newer) , unbranded ( no carrier stuff on it) has nothing to do with network lock
http://www.sammobile.com/firmwares/3/?download=30963 (vodafone)
http://www.sammobile.com/firmwares/3/?download=31852 ( unbranded)
back up your app , data , contacts , pictures , music and use this app to make a backup of your EFS folder ( there is your imei info) just in case
https://play.google.com/store/apps/details?id=com.spocky.galaxsimunlock&hl=en

Thanks so much for that! Awesome.
And to update it with the uk firmware, do i just refer to this guide?
http://forum.xda-developers.com/showthread.php?t=2265477

MartK87 said:
Thanks so much for that! Awesome.
And to update it with the uk firmware, do i just refer to this guide?
http://forum.xda-developers.com/showthread.php?t=2265477
Click to expand...
Click to collapse
Boot to download mode
Connect it to your PC
Open Odin3.09
Extract the Firware from Sammy
Click AP and select the firmware.
Hit start

MartK87 said:
Thanks so much for that! Awesome.
And to update it with the uk firmware, do i just refer to this guide?
http://forum.xda-developers.com/showthread.php?t=2265477
Click to expand...
Click to collapse
hi
they basically say the same ...... there is only one way to flash stock , in your case you do not need to flash the PIT file
from sammobile:
Instructions
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes

Ok thats everything i need thanks so much.
Just one last question.. Can this process be done using a mac or am i better off using an XP based machine?
Thanks guys

MartK87 said:
Ok thats everything i need thanks so much.
Just one last question.. Can this process be done using a mac or am i better off using an XP based machine?
Thanks guys
Click to expand...
Click to collapse
Hi ,
Odin is windows based , it should work in a XP machine as long as the samsung usb drivers are updated

Ok cool.
I will use an XP based machine.
Ok so i now have odin and i now have the 1.54GB firmware package.
I can do the update as per the instructions.
But you suggested getting the latest USB Drivers for my device...
How would I find these drivers?
Is it just a matter of having the latest Kies right??
Thank you.

MartK87 said:
Ok cool.
I will use an XP based machine.
Ok so i now have odin and i now have the 1.54GB firmware package.
I can do the update as per the instructions.
But you suggested getting the latest USB Drivers for my device...
How would I find these drivers?
Is it just a matter of having the latest Kies right??
Thank you.
Click to expand...
Click to collapse
Yes , if you have the latest Kies you are set , remember to close all Kies activity ( task manager)
Good luck

MartK87 said:
Ok cool.
I will use an XP based machine.
Ok so i now have odin and i now have the 1.54GB firmware package.
I can do the update as per the instructions.
But you suggested getting the latest USB Drivers for my device...
How would I find these drivers?
Is it just a matter of having the latest Kies right??
Thank you.
Click to expand...
Click to collapse
1. Install Kies 3, it will autimaticly update all Samsung Drivers to the latest version
2. Connect your phone to the PC
3. Shut down Kies 3 and unconnect your Smartphone from PC
4. Boot in Download Mode on Your Phone
5. Open Odin 3.09
6. Connect Phone to the PC
7. Select AP and than search the tar.md5 file
8. Hit Flash if the button turns blue

Thanks for the help.
Gonna do it tonight after work.
Is there anything on the phone i should enable/disable before doing this?
Such as debugging?
Thanks!

MartK87 said:
Thanks for the help.
Gonna do it tonight after work.
Is there anything on the phone i should enable/disable before doing this?
Such as debugging?
Thanks!
Click to expand...
Click to collapse
No there isn't, just be sure you install all samsung drivers, that your PC can connect to your phone

Can i install 935F stock rom on 935FD Device.

hello, i am from India. I recently bought a new Samsung Galaxy S7 Edge Duos. FEW DAYS AGO (ABOUT 2-3 DAYS) i updated it to latest version over OTA. I tried to root it by CF Auto root but something broke and it transferred my device in bootloop so i downloaded and flashed a stock rom G935FXXU1APB6_G935FOLB1APB6_XSP_FULL using Odin. My device started but i figured out that the rom is Singaporian version and its a March upgrade and i could not update it also. I am also having wifi connectivity issues. My old rom was perfect. It was preinstalled by Company. Please help me or please give me a link of my model's official stock rom rather than Sammobile ( i tried sammobile but my connection refuses and also speed too low )
UPDATE: Also my carrier works.......
PLzzzzzz Help......
Device specifications
Model Number SM-G935FD
BASEBAND VERSION G935FXXU1APEQ
BUILD NUMBER MMB29K.G935FXXU1APB6

gurpreet4u15 said:
hello, i am from India. I recently bought a new Samsung Galaxy S7 Edge Duos. FEW DAYS AGO (ABOUT 2-3 DAYS) i updated it to latest version over OTA. I tried to root it by CF Auto root but something broke and it transferred my device in bootloop so i downloaded and flashed a stock rom G935FXXU1APB6_G935FOLB1APB6_XSP_FULL using Odin. My device started but i figured out that the rom is Singaporian version and its a March upgrade and i could not update it also. I am also having wifi connectivity issues. My old rom was perfect. It was preinstalled by Company. Please help me or please give me a link of my model's official stock rom rather than Sammobile ( i tried sammobile but my connection refuses and also speed too low )
UPDATE: Also my carrier works.......
PLzzzzzz Help......
Device specifications
Model Number SM-G935FD
BASEBAND VERSION G935FXXU1APEQ
BUILD NUMBER MMB29K.G935FXXU1APB6
Click to expand...
Click to collapse
Download this and Flash I was on latest version rooted flashed this and got all the latest updates..
PS : I am using s7 Edge SM-G935FD

[email protected] said:
Download this and Flash I was on latest version rooted flashed this and got all the latest updates..
PS : I am using s7 Edge SM-G935FD
Click to expand...
Click to collapse
Tx vry much for help but can you give a link rather than sammobile

gurpreet4u15 said:
hello, i am from India. I recently bought a new Samsung Galaxy S7 Edge Duos. FEW DAYS AGO (ABOUT 2-3 DAYS) i updated it to latest version over OTA. I tried to root it by CF Auto root but something broke and it transferred my device in bootloop so i downloaded and flashed a stock rom G935FXXU1APB6_G935FOLB1APB6_XSP_FULL using Odin. My device started but i figured out that the rom is Singaporian version and its a March upgrade and i could not update it also. I am also having wifi connectivity issues. My old rom was perfect. It was preinstalled by Company. Please help me or please give me a link of my model's official stock rom rather than Sammobile ( i tried sammobile but my connection refuses and also speed too low )
UPDATE: Also my carrier works.......
PLzzzzzz Help......
Device specifications
Model Number SM-G935FD
BASEBAND VERSION G935FXXU1APEQ
BUILD NUMBER MMB29K.G935FXXU1APB6
Click to expand...
Click to collapse
Did the 935F rom worked perfectly? Please upload your about phone screenshot

Dewang rocky said:
Did the 935F rom worked perfectly? Please upload your about phone screenshot
Click to expand...
Click to collapse
Here's the screenshots.....
Plzz help

gurpreet4u15 said:
Tx vry much for help but can you give a link rather than sammobile
Click to expand...
Click to collapse
Sorry I don't have any other link

[email protected] said:
Sorry I don't have any other link
Click to expand...
Click to collapse
It's ok dude atleast you helped

gurpreet4u15 said:
i downloaded and flashed a stock rom G935FXXU1APB6_G935FOLB1APB6_XSP_FULL using Odin.
Click to expand...
Click to collapse
A bit silly question but have you tried installing from Smart Switch? You mentioned Odin so that didn't look promising...
Try recovery from Smart Switch.

gurpreet4u15 said:
Here's the screenshots.....
Plzz help
Click to expand...
Click to collapse
I have 935FD i havr still not tried 935F rom on it,but seems like you have flashed FD in your S7 edge

Dewang rocky said:
I have 935FD i havr still not tried 935F rom on it,but seems like you have flashed FD in your S7 edge
Click to expand...
Click to collapse
Official ROMs for F & FD models are same...

p2kin said:
Official ROMs for F & FD models are same...
Click to expand...
Click to collapse
Oh thanks,am planning to flash afgan F on my indian FD

I did it on G935FD UAE version. I flashed with G935F UK version, alll is perfect!

troxter said:
I did it on G935FD UAE version. I flashed with G935F UK version, alll is perfect!
Click to expand...
Click to collapse
can you guide me on step to flash? did you do a factory reset before/after flashing? thanks

madkhaz said:
can you guide me on step to flash? did you do a factory reset before/after flashing? thanks
Click to expand...
Click to collapse
Download and install USB drivers for Samsung Galaxy S7 edge in your computer.
Make sure to take backup of any important files on your smartphone.
Enable USB debugging option by pressing Menu > Settings > Applications. Navigate and tap on Developer Options to ensure that USB Debugging is enabled.
Ensure that your Galaxy S7 edge carries more than 70% of charge.
Highly Credible Leak Points At Early Samsung Galaxy S7 Launch Date
Unzip Odin on your computer and install it.
Unzip firmware zip file in the same folder as Odin.
Switch your Samsung Galaxy S7 edge off and boot it in Download mode: press and hold Volume Down and Power together and then press the Home key. OR, check how to enter Download Mode.
Open Odin and connect your smartphone with your computer. When connected successfully, one of the ID:COM boxes will turn yellow with the COM port number after a while. (In case you don’t get it, try another USB port. If that doesn’t help either, then re-install USB drivers).
On your Odin, select files:
Click on AP and select file with AP in its name.
Click on CP and select file with MODEM in its name – ignore if you didn’t get any such file.
Click on CSC and select file with CSC in its name – ignore if you didn’t get any such file.
Click on PIT and select the. pit file – ignore if you didn’t get any such file.
Click on BL and select file with BL in its name – ignore if there is no such file.
Make sure to check Auto Reboot and F.Rest Time. Check Re-Partition only if you selected the. pit file.
Click on Start to initiate the update process.
When Android 6.0.1 Marshmallow update installation is successfully completed, you will get a PASS message.
I don't know if factory reset is necessary after flash, but I did it, just in case. I attached Odin which I used.

p2kin said:
A bit silly question but have you tried installing from Smart Switch? You mentioned Odin so that didn't look promising...
Try recovery from Smart Switch.
Click to expand...
Click to collapse
What's the difference ??

gurpreet4u15 said:
What's the difference ??
Click to expand...
Click to collapse
Unless you know what you are doing and about files source/files you are flashing, then not much.. but if you are not sure, then Smart Switch can download official f/w for your specific model & flash it for you.. simplest, no brainer to recover to official f/w.

p2kin said:
Unless you know what you are doing and about files source/files you are flashing, then not much.. but if you are not sure, then Smart Switch can download official f/w for your specific model & flash it for you.. simplest, no brainer to recover to official f/w.
Click to expand...
Click to collapse
Okk Tx dude......

Official Android 7.0
Hi
I have G935FD device, which I recently bought (the second hand one).
I notice that I have issue with GPRS data transfer... it looks like, from time to time when GPRS is active SMS sending is not possible any more (up to next power OFF of device) .
At that time I'm able to see only one GPRS range indicator.
I'm able to receive calls from both SIM cards.
I did not check am I able to call from both of them.
According to my google investigations issue is pressent in Android 6.0, which I have right now.
Case shall be easy, I need to update to Nugat verision and it is all , but...
1) If I'll check firmware update on my mobile I have inforamtion that it is the latest version of firmware G935FXXU1APD1// G935FXXU1APB6. what is not true
2) I started to looking for official Android 7.0 version. to get it, I have to have CSC code. Phone info application have cleared out all CSC code. *#1234# don't work - "error message connection error or wrong MMI code".
Device type is hero2lte
Product name is hero2ltexx
Product code is SM-G935FZSU - this looks like oryginal information .
Bootloader : G935FXXU1APB6
PDA Version: G935FXXU1APD1
Baseband Version" G935FXXU1APB6
CSC Version :
Kernel Version
3.18.14-7538748
[email protected]#1
64-bit
knox warrantz void: 0x0
Does any one know what can be the oryginal CSC code for such device?
Can you tell me where can I find oryginal Android 7.0 which will works fine in Poland ?
Thanks in advance.
Hi
Below information for anyone who have the same issue as I.
I download the newest official ROM for Android 7.0 for Poland (G935FXXS1DQHI).
I used ROM for single sim, not dual sim.
Since that I don't have any issue with SMS or GPRS any more.
MMI codes started to work back.
I still have dual sim .
Simple , now it works better !!

I got a used GT-935T phone very recently in India, which was still running android 6.0. On browsing these forums, I found out that we could flash stock rom on it without rooting, so I did so using Odin. I flashed the stock rom of Android 7.0 for t-mobile 935T, which was what my phone was supposed to be.
On further browsing, I also discovered, that we could flash any stock rom on the phone, irrespective of the region. So I decided to download the latest stock rom for India 935fd. I did so, but whenever I'm trying to flash it using Odin, I'm getting an error - repartition failed.
I've not checkd the repartition option.
can someone help me?

Hi.
I am using 935F single sim THL csc mobile
I want to change it to IND csc.
Is their any possible solution.
I need voWifi its only available in indian csc.
Also i am staying in india.
My present mobile details are as below.
Product Code: SM-G935FZKAINS
PDA: G935FXXS8ETC7
CSC: G930FODD5ESE1
Baseband: G935FXXS8ETC7
Bootloader: G935FXXS8ETC7
Single sim 935F. Android version 8.0.0

dm-verification faild

When I go to recovery I get this info:
Dm-verify verification faild
Need to check DRK first..
I have flashed firmware and I get this info,
What is the best way to solve this,I read try to found on google but no one give the answer hot to fix this problem ..
Should I try to install another firmware?

no one have an idea how to fix this, I am waithing fort a week for someone to help me..

jjoeshua said:
no one have an idea how to fix this, I am waithing fort a week for someone to help me..
Click to expand...
Click to collapse
According with your model - you may try to download "4 files firmware repair" and flash with Odin. - this is an example, search for you model!!!
You may try Smart Switch for PC - it's a Samsung program which will help you restore the last original stock firmware according with your phone S/N (located under the battery).
Hoping that there is no emmc failure...

When I download this 4 files I flash one by one tru Odin or all files put together in odin?
My model is sm-n910t, tmobile, can I downlaod and flash other sm-n910f clean, without provider?

jjoeshua said:
When I download this 4 files I flash one by one tru Odin or all files put together in odin?
My model is sm-n910t, tmobile, can I downlaod and flash other sm-n910f clean, without provider?
Click to expand...
Click to collapse
Mate, I don't advise to flash the 910F model, as it may break some features which are dedicated to your 910T model. SO better try the 910T repair files. Ans yes, all of them in the same time - your check the boxes in Odin and the phone will be flashed one after the other. Odin knows the order.
BUT!!! As I said before - try first with Smart Switch - https://forum.xda-developers.com/showpost.php?p=70652492&postcount=10
I believe you have more chances to get it done this way faster and cleaner.
Also (disclaimer) - as you will do all this on your risk, please search and read a lot before.

I download and flash through Odin latest firmware that i found, security update is from 1 july 2017..
Than I try to install TWRP
I also try to root with CF auto root
And after all this its the same,nothing of this not solve the problem..
I have bad and old Pc, and computer wont install and open Smart Switch.
First thing when I found better PC is that I will try with Smart Switch and if that not help me the last option is to flash that 4 files that you give me link..

w41ru5 said:
According with your model - you may try to download "4 files firmware repair" and flash with Odin. - this is an example, search for you model!!!
You may try Smart Switch for PC - it's a Samsung program which will help you restore the last original stock firmware according with your phone S/N (located under the battery).
Hoping that there is no emmc failure...
Click to expand...
Click to collapse
I have problem with downloading these 4 files
Can you help me...
When I try to download ,it says that I need premium acount,but I dont have money buy it..
Is there any other site that I can download these 4 repair files..

jjoeshua said:
I have problem with downloading these 4 files
Can you help me...
When I try to download ,it says that I need premium acount,but I dont have money buy it..
Is there any other site that I can download these 4 repair files..
Click to expand...
Click to collapse
Sorry, I can't help. But why don't you go to search and read on the 910T forum - https://forum.xda-developers.com/note-4-tmobile

w41ru5 said:
Sorry, I can't help. But why don't you go to search and read on the 910T forum - https://forum.xda-developers.com/note-4-tmobile
Click to expand...
Click to collapse
Ok thx! I will try.
I found laptop from my friend ,install smart switch and i get info that i have update ,so I downlaod and update phone.
It still 6.0.1 but security update is from 1 avgust 2017. Now when I,go to option about phone softwere update it says device is up to date.
Finally I have install the latest stock version.
But problem with dm verify verification is still there.. smart switch not fix that..
But now I now that if Maybe get someday again update I will install it try amart switch..
Thx for help ,and sorry for bothering you with some stupid questions. .

jjoeshua said:
Ok thx! I will try.
I found laptop from my friend ,install smart switch and i get info that i have update ,so I downlaod and update phone.
It still 6.0.1 but security update is from 1 avgust 2017. Now when I,go to option about phone softwere update it says device is up to date.
Finally I have install the latest stock version.
But problem with dm verify verification is still there.. smart switch not fix that..
But now I now that if Maybe get someday again update I will install it try amart switch..
Thx for help ,and sorry for bothering you with some stupid questions. .
Click to expand...
Click to collapse
Hey man, no problem, happy to share knowledge (as little as it is ), learn and help. This is XDA about.