Greetings,
I had a short visit to Dubai and I've bought an X10 from the airport on my way back home. I had it sealed and I opened it when I got back.
It was shocking that it had no android market and I am stuck with the phone and can't replace it.
I just want to have the firmware other than the one loaded to it that is specific for Dubai with no android market, I've been reading in this forum and I guess this process is called "rebranding" if I am correct? Please guide me to how to get android market on my handset because they do cheat people when they sell android handset without market application.
Hi.
You could follow steps 1 to 6 HERE which will "debrand" the phone, then run SEUS for the latest FW, or should you want to root the phone you could follow all the steps.
I've followed the instruction till step 6 then I ran SEUS but it says my phone is up to date. I didn't do step 7.
I have the market now showing up, I will try it and get back to you. But I am wondering why SUES gave me no updates?
My baseband version is 1.1.27 and my build number is R2BA023
Are these the latest versions?
I've used the market app and downloaded my first application. I am really thankful for your help.
I do have a question, before I do steps (from 1 to 6) my build version was R2BA024 and after I did all you said I am stuck with R2BA023, when I try SUES or OTA update it says my phone is up to date. What does this mean? I can't update my phone anymore?
plz Re-post the link
XperienceD said:
Hi.
You could follow steps 1 to 6 HERE which will "debrand" the phone, then run SEUS for the latest FW, or should you want to root the phone you could follow all the steps.
Click to expand...
Click to collapse
i have the same exact problem as HUNCH...BUt when the click on ur link im getting this message
Invalid Thread specified. If you followed a valid link, please notify the administrator
please repost the link...
n do tell can i update my phone after that using SEUS or not?
Thx in advance!
Download Flashtool with a generic firmware, flash it into your phone and enjoy your unbranded phone with the market. After flashing with Flashtool use SEUS to be sure everything is cleaned with a clean install with SEUS.
PlayGunsta said:
Download Flashtool with a generic firmware, flash it into your phone and enjoy your unbranded phone with the market. After flashing with Flashtool use SEUS to be sure everything is cleaned with a clean install with SEUS.
Click to expand...
Click to collapse
thanx a lot for the reply....but i have a few doubts
1) My phone's firmware is already 2.1-update 1 and build number is 2.1.A.0.435 should i still download it?
2) Is the FlashTool version 0.2.8 the latest version or i shud find the lastest version and download it?
3) So,if i flash my phone wat exactly will happen?Will i get android market in my phone now?
4)Should i back up my phone before doing this?
5)there is Slide me(sam 4.0) pre-installed?...does this remain?
6)wat is debranding? should i do it too?
7)Can i update my phone usind SEUS after this?
8) what do u suggest...should i just flash my phone or i should root it too and do the utilise the below options?
-install xRecovery, Busybox
- Clean your Rom (remove /system/apps apps of your choice)
- Clear dalvik cache
- Optimize (install of JIT v2)
- Customize (installs apps found in the custom/apps folder of the flashtool)
- Clean uninstalled (remove any references to system apps removed in the Clean (root needed) step)
- Edit /system/build.prop
Thx!
Thx!
evilmonk69 said:
thanx a lot for the reply....but i have a few doubts
1) My phone's firmware is already 2.1-update 1 and build number is 2.1.A.0.435 should i still download that firmware
2) Is the FlashTool version 0.2.8 the latest version or i shud find the lastest version and download it?
3) So,if i flash my phone wat exactly will happen?Will i get android market in my phone now? Can i update my my phone using SEUS or not?
4)should i back up my phone before doing this?
5)There is slide me market(sam 4.0) pre-installed...does this remain in my phone after this?
8) what do u suggest...should i just flash my phone or i should root it too and do the utilise the below options?
-install xRecovery, Busybox
- Clean your Rom (remove /system/apps apps of your choice)
- Clear dalvik cache
- Optimize (install of JIT v2)
- Customize (installs apps found in the custom/apps folder of the flashtool)
- Clean uninstalled (remove any references to system apps removed in the Clean (root needed) step)
- Edit /system/build.prop
Thx!
Click to expand...
Click to collapse
I don't know what you want to backup, but you could sync your contact/agenda etc with google. After that, download firmware .435 Generic and flash it into your phone. You will now have a unbranded device with market.
AFter doing that, you can optimize your ROM with Flashtool, install xRecovery, root etc... After the flashtool installation you will lose EVERYTHING. So be sure you back-up all important things.
PlayGunsta said:
I don't know what you want to backup, but you could sync your contact/agenda etc with google. After that, download firmware .435 Generic and flash it into your phone. You will now have a unbranded device with market.
AFter doing that, you can optimize your ROM with Flashtool, install xRecovery, root etc... After the flashtool installation you will lose EVERYTHING. So be sure you back-up all important things.
Click to expand...
Click to collapse
thank you for the quick reply...
sorry for being such a noob but i still have some doubts
is it enough if i use back up and restore application.
n Just to be sure after this process can i use SEUS to update my phone regularly?
n how different is debranding from flashing?
evilmonk69 said:
thank you for the quick reply...
sorry for being such a noob but i still have some doubts
is it enough if i use back up and restore application.
n Just to be sure after this process can i use SEUS to update my phone regularly?
n how different is debranding from flashing?
Click to expand...
Click to collapse
Back up and restore could be fine if it does backup everything you want.
Debranding means that your phone is not LIMITED to one provider with software updates. So when SE releases a firmware you will have to wait till your provider releases the firmware for you. But when you debrand you get updates from SE and not your provider.
evilmonk69 said:
thanx a lot for the reply....but i have a few doubts
1) My phone's firmware is already 2.1-update 1 and build number is 2.1.A.0.435 should i still download that firmware
2) Is the FlashTool version 0.2.8 the latest version or i shud find the lastest version and download it?
3) So,if i flash my phone wat exactly will happen?Will i get android market in my phone now? Can i update my my phone using SEUS or not?
4)should i back up my phone before doing this?
5)There is slide me market(sam 4.0) pre-installed...does this remain in my phone after this?
8) what do u suggest...should i just flash my phone or i should root it too and do the utilise the below options?
-install xRecovery, Busybox
- Clean your Rom (remove /system/apps apps of your choice)
- Clear dalvik cache
- Optimize (install of JIT v2)
- Customize (installs apps found in the custom/apps folder of the flashtool)
- Clean uninstalled (remove any references to system apps removed in the Clean (root needed) step)
- Edit /system/build.prop
Thx!
Click to expand...
Click to collapse
Well technically this isn't debranding because your phone is not carrier branded (It's just a generic UAE with no Market).
This is just switching to another region which has Android Market. But the way to do this is exactly the same as when debranding a phone.
Android Market isn't available in the UAE region.
So if you re-flash with another region and get market, and still using a SIM from the UAE I think it would block any content. But then you could root your phone and use Market Enabler to fake another carrier and get Android Market to work.
But since you "brought it home" I can say that reflashing it to another region will get you Android Market and it will work. You don't need to back up your UAE firmware when replacing it with another region firmware, and after you've flashed it with another region firmware SEUS or PCC will always flash to that region firmware.
If you flash to another region you won't have SlideMe Market, because all other region firmwares all have access to Android Market and therefor comes with Android Market pre-installed instead.
I remember when the first 2.1.A.0.435 build was released, that was to UAE it had no Market so I made a xRecovery fix package to get Android Market on it.
But would suggest you to flash another region firmware instead of this, because then when you flash with SEUS or PCC again in the future you would miss Android Market again.
You can find the latest firmwares here (don't use the AT&T but go for the one below called 2.1.B.0.1)
http://forum.xda-developers.com/showpost.php?p=11038646&postcount=1
Sony Ericsson said:
The Android Market is not supported in the UAE. This is due to the fact that Google has not had the necessary agreements with the Regulatory bodies as yet. This is fully controlled and managed by Google. Sony Ericsson will be offering Slide Me which is an alternative to Android market in the UAE.
Click to expand...
Click to collapse
PlayGunsta said:
Back up and restore could be fine if it does backup everything you want.
Debranding means that your phone is not LIMITED to one provider with software updates. So when SE releases a firmware you will have to wait till your provider releases the firmware for you. But when you debrand you get updates from SE and not your provider.
Click to expand...
Click to collapse
So,should i just flash my phone or debrand it too?
arkedk said:
Android Market isn't available in the UAE region.
So if you debrand it and get market, and still using a SIM from the UAE I think it would block any content. But then you could root your phone and use Market Enabler to fake another carrier and get Android Market to work.
But since you "brought it home" I can say that reflashing it to another region will get you Android Market and it will work. You don't need to back up your UAE firmware when replacing it with another region firmware, and after you've flashed it with another region firmware SEUS or PCC will always flash to that region firmware.
If you flash to another region you won't have SlideMe Market, because the all other region firmwares all have access to Android Market and therefor comes with Android Market pre-installed instead.
I remember when the first 2.1.A.0.435 build was released, that was to UAE it had no Market so I made a xRecovery fix package to get Android Market on it.
But would suggest you to flash another region firmware instead of this, because then when you flash with SEUS or PCC again in the future you would miss Android Market again.
You can find the latest firmwares here (don't use the AT&T but go for the one below 2.1.B.0.1)
http://forum.xda-developers.com/showpost.php?p=11038646&postcount=1
Click to expand...
Click to collapse
Thank you so much!!!....i live in india
So, i can just flash(no need to debrand) to other region without worrying rite?
evilmonk69 said:
So,should i just flash my phone or debrand it too?
Click to expand...
Click to collapse
Just ******* flash a generic firmware as said many times before and you won't be limited by a region.
PlayGunsta said:
Just ******* flash a generic firmware as said many times before and you won't be limited by a region.
Click to expand...
Click to collapse
He is on Generic firmware just so you know.
It's just Generic firmware that does not contain Android Market.
PlayGunsta said:
Just ******* flash a generic firmware as said many times before and you won't be limited by a region.
Click to expand...
Click to collapse
sorry for being such a pain in the arse...but one last question
which generic firmware do u suggest?
evilmonk69 said:
sorry for being such a pain in the arse...but one last question
which generic firmware do u suggest?
Click to expand...
Click to collapse
You're not a pain in the arse. Some people are just immature.
As said before 2.1.B.0.1 is the latest.
http://forum.xda-developers.com/showthread.php?t=936733
Direct Download:
http://www.multiupload.com/3GT0KKFMXP
arkedk said:
You're not a pain in the arse. Some people are just immature.
As said before 2.1.B.0.1 is the latest.
http://forum.xda-developers.com/showthread.php?t=936733
Direct Download:
http://www.multiupload.com/3GT0KKFMXP
Click to expand...
Click to collapse
Thank you..thank you ...thank you!!!!
I'm watching this , chill out.
does 2.1.B.0.1include DT?
thanx for 2.1.B.0.1.It works great...
Just wondering does 2.1.B.0.1 have Dual touch
Related
This morning connected my Galaxy Tab to KIES and it prompted that there is an update !!
it took ages to download its binary files then finally after it got done, it gave me a decryption error !!
I have changed my sales code to gain access to market, could this be the problem or do i redownload the files !!
Isn't there a way to UPGRADE fw via OTA? or placing update.zip in root of sd nd flashing from recovery? (similar to HTC devices)
how do I upgrade to the latest version? help please
Cheers
Jackie
PS: Please find attached the firmware code : current and new !
Are you UK based Jackie? Just guessing as you said cheers! I've seen nothing this morning though have read there was an Android Market update which I had already downloaded and applied, maybe why I'm seeing no update.
no I'm based in UAE !! that's just teh way I speak !!
Ah right, nice to read it all the same, Cheers!
so anyone has any idea?
Jackie,
I don't bother with Kies.... It put my SGS in a right mess and couldn't be used until I sorted it out with another ROM and a different PC software upgrader by the name of Odin.
Your best bet is to go on over to samfirmware.com and check out the latest ROM's available.
I'm sending you also a link which although was written for the SGS and Froyo it's still relevant for ROM files for the Tab and how to use Odin.
See here:- How to use Odin to Upgrade the SGS to Froyo
Beards said:
Jackie,
I don't bother with Kies.... It put my SGS in a right mess and couldn't be used until I sorted it out with another ROM and a different PC software upgrader by the name of Odin.
Your best bet is to go on over to samfirmware.com and check out the latest ROM's available.
I'm sending you also a link which although was written for the SGS and Froyo it's still relevant for ROM files for the Tab and how to use Odin.
See here:- How to use Odin to Upgrade the SGS to Froyo
Click to expand...
Click to collapse
How do I know which is the latest ROM is for my TAB !
I checked out samfirmware, but it has loads of firmwares !
I'll check out what to do with ODIN though !
Thanks a lot
Cheers
jackie_jagger said:
How do I know which is the latest ROM is for my TAB !
I checked out samfirmware, but it has loads of firmwares !
I'll check out what to do with ODIN though !
Thanks a lot
Cheers
Click to expand...
Click to collapse
First, what ROM version do you currently have installed?
Next, look at the list of ROM's available see here.
You need to find out if you are on a European, Asian, Arabic, etc ROM and decide if you want to stay on that list or opt to another nation list.
For European lists JMA is the latest. There's a topic on JMA here.
PDA: P1000JPJJ2
Phone: P1000JXJJ1
CSC: P1000OJPJJ3
is what is being reported on *#1234# and samfirmware says this is the Arabic firmware and the latest for Arabic is P1000JVJL1 December 2010, not that I'm interested in any of the region specific apps - just wondering what has been fixed in these firmwares and also if flashing would delete all my data (I'm guessing it would)
I don't mind flashing a European firmware too, so which would be best?
PS: Tab is currently rooted with OCLF set ! =)
Cheers
Hi may i ask if you do firmware update does the tab have to be sim free not lock to a network as im on t-mobile uk, i dont want to brick my tab
thanks
jackie_jagger said:
PDA: P1000JPJJ2
Phone: P1000JXJJ1
CSC: P1000OJPJJ3
is what is being reported on *#1234# and samfirmware says this is the Arabic firmware and the latest for Arabic is P1000JVJL1 December 2010, not that I'm interested in any of the region specific apps - just wondering what has been fixed in these firmwares and also if flashing would delete all my data (I'm guessing it would)
I don't mind flashing a European firmware too, so which would be best?
PS: Tab is currently rooted with OCLF set ! =)
Cheers
Click to expand...
Click to collapse
It should not delete any data.
The browser and camera have been improved.
The browser now scrolls smoother.
The camera focus's much better.
No idea what other improvements have been made.
It does not really matter which firmware you wish to use BUT bear in mind a number of users who have performed a lagfix have had issues in upgrading the ROM.
You MUST ensure you remove any lagfix applied otherwise you stand a good chance in bricking the phone.
Also, ensure you have access to the Recovery and download mode.
You will need this if you 'brick' the phone.
ownhd2 said:
Hi may i ask if you do firmware update does the tab have to be sim free not lock to a network as im on t-mobile uk, i dont want to brick my tab
thanks
Click to expand...
Click to collapse
You need someone who is on a T-Mobile locked phone to answer this. I have heard of users on carrier networks who have run into issues.
Basically, unless you have a sound knowledge in what you are doing I would not attempt it until you get good solid advice.
seems like a long procedure, I'll hold off until i'm done with my exams....
also should I try KIES again? just in case ?? o.0
jackie_jagger said:
seems like a long procedure, I'll hold off until i'm done with my exams....
also should I try KIES again? just in case ?? o.0
Click to expand...
Click to collapse
You can try but I'd still make sure you have access to recovery and download first, just in case anything goes wrong.
Aight !! thanks a bunch !! will do
Got a similar problem... info says its P1000XXJID, valid euro firmware... Bought the tab in Hungary (Middle of europe), carrier free, and after looking at samfirmware.com's ROM list I was wondering about the updates.
Kies tells me this version can't be updated...
Can anyone help me with this problem?
Many, Many of us here in UK are having problems and are unsuccessful when trying to update/upgrade using Kies.
Hopefully Kies will get fixed properly to allow us all to use it.
ziffos said:
Many, Many of us here in UK are having problems and are unsuccessful when trying to update/upgrade using Kies.
Hopefully Kies will get fixed properly to allow us all to use it.
Click to expand...
Click to collapse
Even ActiveSync was better... at least it didn't offer the SW update...
to trick kies to update u could use kies registry patcher. I have sucsessfully updated via kies from jj3 -> jj7 (when no updates was availible)
read thru this post
http://forum.xda-developers.com/showthread.php?t=863386
Use the info from check fus and paste it in registry patcher, reboot pc - start kies - connect phone - something should happen.
I am trying to unlock my x10a locked to ATT, I purchased the unlocking code but it seems that mi unlocking code cannot be found on the unlocking server.
They offered me the unlocking software which requires to be running android 2.1.
So the deal is that I don’t know what is the version that the cel is running, I will think is not 2.1, but I don’t know how to tell, so how can I update the cel to android 2.1 on a locked phone.
BTW I don’t have any ATT sim
PLS help!!!
flashtool will probably still work!
urenajoseluis said:
I am trying to unlock my x10a locked to ATT, I purchased the unlocking code but it seems that mi unlocking code cannot be found on the unlocking server.
They offered me the unlocking software which requires to be running android 2.1.
So the deal is that I don’t know what is the version that the cel is running, I will think is not 2.1, but I don’t know how to tell, so how can I update the cel to android 2.1 on a locked phone.
BTW I don’t have any ATT sim
PLS help!!!
Click to expand...
Click to collapse
Does your lockscreen have and arc you have to swipe or a straight line at the bottom to unlock (like iPhone)?
If you have the arc swipe to leave lockscreen then you're on 1.6.
If you got the straight swipe line, then your on 2.1.
You can check your Android version by going to:
Settings>About Phone
And check what it says in the Firmware version field.
Yes I have the Arc so I'm on 1.6
I can't go to setting I can only do an emergency call.
urenajoseluis said:
Yes I have the Arc so I'm on 1.6
I can't go to setting I can only do an emergency call.
Click to expand...
Click to collapse
Ahh yea the AT&T restrictions. Forgot about those, on generic firmwares you can boot up without a SIM in the phone.
Well you just have to flash a generic X10a firmware with FlashTool then.
To be safe get the X10a (2.0.A.0.504) firmware.
Not confirmed this myself, but I think going from 1.6 to 2.1 requires you initially flash 2.0.A.0.504 before any other 2.1 firmware (But I'm really not certain about this, so this is just a safety precaution on my part).
This can all be found in the FlashTool thread here:
http://forum.xda-developers.com/showthread.php?t=920746
Then just flash that and then you'll be ready for your cable unlock.
Is there a matrix of FW releases??
urenajoseluis said:
Is there a matrix of FW releases??
Click to expand...
Click to collapse
Yea there is a lot, but if you checked my link you would see there is only 3 generic firmwares for each device (X10i & X10a) in the link.
ok arkedk thanks for the help, will download that and check if it helps.
Why flash old 2.0.A.0.504 firmware without dualtouch?
Here's a step by step guide for AT&T X10a users to update to the most recent global generic 2.1.A.0.435 firmware, which has dualtouch and will be certain to get the official 2.3.3 Gingerbread update directly from SE when available.
http://forum.xda-developers.com/showthread.php?t=1012380
agentJBM said:
Why flash old 2.0.A.0.504 firmware without dualtouch?
Here's a step by step guide for AT&T X10a users to update to the most recent global generic 2.1.A.0.435 firmware, which has dualtouch and will be certain to get the official 2.3.3 Gingerbread update directly from SE when available.
http://forum.xda-developers.com/showthread.php?t=1012380
Click to expand...
Click to collapse
Told him to flash that because I remember someone long ago said that going from 1.6 to the latest 2.1 could cause problems. But was not certain on that so better safe than sorry. And either way he will be able to get 2.3 on 2.0.A.0.504 just aswell as on 2.1.A.0.435. This was just so he could get the device unlocked in the safest possible way I could recommend. He can always just connect the X10 to SEUS after he has unlocked, and then it will update him to the latest 2.1.A.0.435
Sent from my X10i using Tapatalk
On x10unlocked.com it says that I shouldn't have a custom firmware installed.
That's the software the company provided me with.
Please advice
Am i missing something here, but wont pc companion or seus put everyone on the latest official 2.1 version from se with no problems
Then he can unlock easy with flashtool.
Edit
So, download seus or pc companion from se website, instal and follow the instructions. You don't even have to be able to turn the phone on for it to work
Sent from my X10i using XDA App
gregbradley said:
Am i missing something here, but wont pc companion or seus put everyone on the latest official 2.1 version from se with no problems
Then he can unlock easy with flashtool.
Edit
So, download seus or pc companion from se website, instal and follow the instructions. You don't even have to be able to turn the phone on for it to work
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Not any kit. If you want the bloatware branded ATT 2.1 firmware that limits data speeds and blocks apps from unknown sources. Also, most branded kits will not be getting the Gingerbread update.
What i seem to think his problem is is that he cant unlock on SETool because he is on 1.6 and that only works with stock 2.1
So he needs 2.1 on his phone which he is struggling with.
So, use official means to upgrade to the official 2.1, unlock using SETool, then use flashtool to root, install recovery and flash any firmware or custom rom he wants.
Why the worry about dual touch drivers etc etc.....once its rooted you can get rid of bloatware, easily flash generic firmware and receive 2.3 update....
I am confused as to why this poses a problem.
agentJBM said:
Not any kit. If you want the bloatware branded ATT 2.1 firmware that limits data speeds and blocks apps from unknown sources. Also, most branded kits will not be getting the Gingerbread update.
Click to expand...
Click to collapse
gregbradley said:
What i seem to think his problem is is that he cant unlock on SETool because he is on 1.6 and that only works with stock 2.1
So he needs 2.1 on his phone which he is struggling with.
So, use official means to upgrade to the official 2.1, unlock using SETool, then use flashtool to root, install recovery and flash any firmware or custom rom he wants.
Why the worry about dual touch drivers etc etc.....once its rooted you can get rid of bloatware, easily flash generic firmware and receive 2.3 update....
I am confused as to why this poses a problem.
Click to expand...
Click to collapse
Enabling apps from unknown sources isn't as easy as rooting with ATT. Also, data is throttled down to 3G.
You even suggest flashing generic after updating via SEUS or PCC. Why add all these extra steps? This is xda. You can accomplish everything with global generic 2.1.A.0.435 firmware in about 5 minutes with the flash tool.
Well What I did was use Sony Ericsson Update Service, when I connected the phone it told me that there is a newer version so it updated it to firmware version 2.1-update1. So I was able to unlock the phone using multi unlock. Now to get the latest firmware which I understood it is 2.1.A.0.435 with Flash Tool.
Can I go straight from 2.1-update1 to 2.1.A.0.435?
And a last question a generic firmware means that I won’t have all those useless ATT apps on my phone?
Thanks for the help
urenajoseluis said:
Well What I did was use Sony Ericsson Update Service, when I connected the phone it told me that there is a newer version so it updated it to firmware version 2.1-update1. So I was able to unlock the phone using multi unlock. Now to get the latest firmware which I understood it is 2.1.A.0.435 with Flash Tool.
Can I go straight from 2.1-update1 to 2.1.A.0.435?
And a last question a generic firmware means that I won’t have all those useless ATT apps on my phone?
Thanks for the help
Click to expand...
Click to collapse
Yea a generic firmware is one without any branded apps, special setup or limited features.
The latest generic was released for the German generic kits an has build version 2.1.B.0.1. You can find it in my signature.
What do you mean by German generic kits?
I apologize to be a pain but I just getting in the android world.
urenajoseluis said:
What do you mean by German generic kits?
I apologize to be a pain but I just getting in the android world.
Click to expand...
Click to collapse
All Sony Ericsson devices is sold in different regions and has a region specific code. That code determines if your region is eligible for an update (Sony Ericsson rolls out their updates in regions).
Some regions gets updates that others don't get, that's the case with the 2.1.B.0.1, this firmware was only released to the German "kits".
Not a pain at all, we all have to start somewhere
Ok then I will go to 2.1.B.0.1, hopefully I won’t screw up my phone since this is the first time doing this
I know that some may be frustrated to see the latest official update via PCC is not available to your phone.
It's only the country that matters for this update as some country like USA get the update first-hand.
So if your country does not have it. Like me, you can try this simple trick to get the official update.
For locked BL who wants to update the official FW.
1. Just simply Uninstall your Sony PC Companion if you already have it installed and tried to update and cannot update because of country issue.
2. Just simply install it again! yes again. this time when it asked for your country just choose USA , UK or some other country that gets the updates first. For me US works.
3. That's it. Try again and hopefully it worked for you too.
tell me if it works okay? and hit don't forget to hit thanks if i helped.
mishap13 said:
I know that some may be frustrated to see the latest official update via PCC is not available to your phone.
It's only the country that matters for this update as some country like USA get the update first-hand.
So if your country does not have it. Like me, you can try this simple trick to get the official update.
For locked BL who wants to update the official FW.
1. Just simply Uninstall your Sony PC Companion if you already have it installed and tried to update and cannot update because of country issue.
2. Just simply install it again! yes again. this time when it asked for your country just choose USA , UK or some other country that gets the updates first. For me US works.
3. That's it. Try again and hopefully it worked for you too.
tell me if it works okay? and hit don't forget to hit thanks if i helped.
Click to expand...
Click to collapse
sorry mate I tried this and it doesn't work, nice try though.
mishap13 said:
I know that some may be frustrated to see the latest official update via PCC is not available to your phone.
It's only the country that matters for this update as some country like USA get the update first-hand.
So if your country does not have it. Like me, you can try this simple trick to get the official update.
For locked BL who wants to update the official FW.
1. Just simply Uninstall your Sony PC Companion if you already have it installed and tried to update and cannot update because of country issue.
2. Just simply install it again! yes again. this time when it asked for your country just choose USA , UK or some other country that gets the updates first. For me US works.
3. That's it. Try again and hopefully it worked for you too.
tell me if it works okay? and hit don't forget to hit thanks if i helped.
Click to expand...
Click to collapse
There's something called Flashtool for that reason... Download the update you need and flash it with Flashtool. No need to do so many things just to get it to work when there is another solution available.
僕のLT18iから送られてきた
popthosegaskets said:
There's something called Flashtool for that reason... Download the update you need and flash it with Flashtool. No need to do so many things just to get it to work when there is another solution available.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
yeah, its easier use flashtool...
Hi everybody,
I'm new here, I have bought my first sony (used) but I notice that the LTE signal is so poor specially indoor. The seller hasn't saw me that the firmware is an UK fw also I live in italy, infact, after a little research, I noticed that there is a carrier's app called EE and the fw version installed is of EE carrier's. The phone is sim unlock. There isn't root and I haven't unlook the bootloader.
My questions are:
- Can I change the stock uk firmware putting in an Italian stock firmware?
- Can I change it without root and without unlook the bootloader?
- How?
- Is there a guide that I can follow?
- Can I change the CSC for preserve the ota upgrade? How? I'd like to change fw preserving OTA update.
I don't wanna unlock the bootloader and root the phone cause I don't want lose the DRM licenses (widevine specially). I'm not interested to rooting or make any modding.
I'd like to put a stock room without bloat apps and with a strong lte signal.
Here the Info about the phone:
F8331
Android 8.0
Phone Software Version: 1302-9157_41.3.A.2.171
Global-LTE3A
Generic-41.3.a.2.171
S1 Boot version: 1299-4832 S1_BOOT_MSM8996_LA2.0_O_204
BASEBAND: 8996-8996.gwn.prodQ-00070-40
Customization version: 1305-7307R8E
Codes phone for CSC doesn't work.
Thanks y for the support
P.s.
Here a link to some pics about the phone:
4shared.com/s/dipBSZcFc
I think it should be possible to just Flash another Regions Firmware via Androxydes Flashtool.
No need for unlock as long as u have any offical fw (XperiFirm comes with Flashtool and downloads offical files)
But I may be wrong tho, this just came to my mind in the first moment
LoaderFabi said:
I think it should be possible to just Flash another Regions Firmware via Androxydes Flashtool.
No need for unlock as long as u have any offical fw (XperiFirm comes with Flashtool and downloads offical files)
But I may be wrong tho, this just came to my mind in the first moment
Click to expand...
Click to collapse
Thanks you LoaderFabi for the suggest, so I will waiting for a confirmation about that.
Meanwhile can y tell me a link to a guide and download the tool?
Anyway, thanks again ?
You can flash any region's firmware without unlocking the bootloader. You need Xperifirm to download the firmware, and Flashtool to flash it.
Kuarinfou said:
You can flash any region's firmware without unlocking the bootloader. You need Xperifirm to download the firmware, and Flashtool to flash it.
Click to expand...
Click to collapse
Ok, and about the OTA's update? Will it be automatically? Or do I have something about? And how?
Can you link me a guide to flash the fw and, eventually, to do something about OTA's update?
Thanks
Sean_Droid said:
Ok, and about the OTA's update? Will it be automatically? Or do I have something about? And how?
Can you link me a guide to flash the fw and, eventually, to do something about OTA's update?
Thanks
Click to expand...
Click to collapse
Since it's an official firmware, you always get updates OTA (i think XZ will no longer get updates but no need to worry). I didn't see any guide to flash, i'll probably today write a guide to flash firmwares.
Kuarinfou said:
Since it's an official firmware, you always get updates OTA (i think XZ will no longer get updates but no need to worry). I didn't see any guide to flash, i'll probably today write a guide to flash firmwares.
Click to expand...
Click to collapse
Thanks y so much Kuarinfou, I will waiting for your guide. I don't remember where I red in this forum about the CSC and that it could not change also flashing a stock fw bringing the OTA's issue... Probably I remember wrong ?
Anyway, Quote me when you will do it.
Sean_Droid said:
Thanks y so much Kuarinfou, I will waiting for your guide. I don't remember where I red in this forum about the CSC and that it could not change also flashing a stock fw bringing the OTA's issue... Probably I remember wrong
Anyway, Quote me when you will do it.
Click to expand...
Click to collapse
https://forum.xda-developers.com/xperia-xz/how-to/guide-flashing-firmware-xperia-phones-t3860048
Kuarinfou said:
https://forum.xda-developers.com/xperia-xz/how-to/guide-flashing-firmware-xperia-phones-t3860048
Click to expand...
Click to collapse
Thanks you so much ?
Hi, I have recently bought an XZ2 Premium imported from Hong Kong, which seems to be the last region to receive the Android Pie update. As Flashtool doesn't have an FSC for Android Pie, I am unable to flash a different region's firmware. Would anyone be able to provide a script so that I can flash my phone please?
I used newflasher, but I flashed it two times.
First time with newflasher excluding persist.sin file not to loose the Android Attest Key and then second time with Xperia Companion repair to be sure.
see my post about newflasher here
PhonerX said:
I used newflasher, but I flashed it two times.
First time with newflasher excluding persist.sin file not to loose the Android Attest Key and then second time with Xperia Companion repair to be sure.
see my post about newflasher here
Click to expand...
Click to collapse
I'm not sure how I feel about using something I've never used before and I don't want to lose all my data by flashing.
Can someone help us providing this file?
herasymcuk said:
Can someone help us providing this file?
Click to expand...
Click to collapse
What I ended up doing was flashing a different region's version of Nougat with Flashtool, and then it updated to Pie automatically.
UK ROM for single-SIM devices: https://androidfilehost.com/?fid=1322778262904007092
UK ROM for dual-SIM devices: https://androidfilehost.com/?fid=1322778262904006585
I only used the UK ROM because it was the easiest one to find, but feel free to use whichever. The Hong Kong handsets are literally the only ones still waiting for Pie.
spinstartshere said:
What I ended up doing was flashing a different region's version of Nougat with Flashtool, and then it updated to Pie automatically.
UK ROM for single-SIM devices: https://androidfilehost.com/?fid=1322778262904007092
UK ROM for dual-SIM devices: https://androidfilehost.com/?fid=1322778262904006585
I only used the UK ROM because it was the easiest one to find, but feel free to use whichever. The Hong Kong handsets are literally the only ones still waiting for Pie.
Click to expand...
Click to collapse
Thank you very much. i was just thinking about the same thing: to flash nougat and upgrade to pie via ota then.
Yeah..i have the hk version....and it's frustrating to see how much time they need to let be available pie!
Hoping to do what pleases, I want to inform you that I have upgraded to pie (without deleting any existing data) following the advice of the friend above. So: 1) I downloaded the UK firmware into the flashtool folder. 2) Start the flash without flagging any box related to the data wipe. Wait approximately 20 minutes. (note that the flashtool process stops with the writing "disconnected phone, connected in flash mode, and not with" flash terminated, disconnect the device). Restarted .... in 2 minutes I detected the update available to android pie. 3) Download and install the update of about 1.01GB. Everything works perfectly. Thx again
I trying to find the fsc file...
Starwalkerfenix said:
I trying to find the fsc file...
Click to expand...
Click to collapse
Have a look at post 5 - I put a solution in there.
spinstartshere said:
Have a look at post 5 - I put a solution in there.
Click to expand...
Click to collapse
I'm sorry, but that's not a solution for me. This would involve completely resetting the device, starting it as if it were the first time, and after updating to the latest version of 9.0, re-reset to factory settings so that you can take the backup copy of Google, since the latest copies of Security are not compatible with previous versions. When you have 15 applications it can be simple, but I have 190, most with different passwords. That's why I want only the .fsc file, so I can change the version without losing data.
Starwalkerfenix said:
I'm sorry, but that's not a solution for me. This would involve completely resetting the device, starting it as if it were the first time, and after updating to the latest version of 9.0, re-reset to factory settings so that you can take the backup copy of Google, since the latest copies of Security are not compatible with previous versions. When you have 15 applications it can be simple, but I have 190, most with different passwords. That's why I want only the .fsc file, so I can change the version without losing data.
Click to expand...
Click to collapse
You don't have to reset the phone at all if you do it the way I did it. Resetting my phone isn't a solution for me either, which is why I didn't try the other suggestion made here of using newflasher.