Question about rooting Australian i9506 - Galaxy S 4 Q&A, Help & Troubleshooting

Recently came into possession of a i9056 and it runs i9506xxucnk1 . Anybody know if the usual rooting method with odin works fine with the AU version of the phone? Would appreciate any thoughts on the subject.

Yes, it does.
Sent from my GT-I9500

First Goto Google.com>Chainfire. Com/i9506>download Su..
Now
Flash it through Odin after going on Download mode by pressing Power+VolumeUp flash the zip now ure rooted

Thanks for the info guys!

Related

Solution for soft-bricked N9005 after flashing Hong Kong's TGY firmware

I am posting this to help people who ran across the same problem I did the past 24 hours, which drove me crazy and it was quite difficult to find any info on it.
I bought my N9005 on eBay from a Hong Kong seller. I just updated it with Kies and noticed that sammobile.com has a newer MJ8 firmware, so I figured I'd just download it and flash it via Odin.
Kies shows my mobile as XME (Malaysia region), but I guessed it should work just fine, and boy was I wrong.
Moments after trying to flash it, it failed, but it did manage to flash the beginning of the firmware, which was the new MJ bootloader. That newer bootloader does not allow any other firmware with older bootloader be flashed on the phone. Not even Kies's emergency recovery was able to revive my phone which was stuck in emergency download mode.
When trying to flash I got all sorts of errors, such as:
invalid ext4 image
and
CHECK FAIL : fused : 2 , Binary : 1. (when trying to install the older XME Malaysian Firmware on top of the new bootloader)
To make a very long story short, after almost giving up and start waiting for a Malaysian firmware with the new bootloader to be released, I ran across the UK MJ6 BTU rom which does have the new bootloader too and decided to try flashing it. To my amazement - this worked and my phone is back to life! phewwwww!
This is a download link to the BTU MJ6 firmware:
http://www.hotfile.com/dl/252753467/b379b8f/N9005XXUDMJ6_N9005OXADMJ4_BTU.zip.html
Hope this helps others!
P.S. If this information helped you, please click the "THANKS" button below. It's free of charge.
doclucas said:
I am posting this to help people who ran across the same problem I did the past 24 hours, which drove me crazy and it was quite difficult to find any info on it.
I bought my N9005 on eBay from a Hong Kong seller. I just updated it with Kies and noticed that sammobile.com has a newer MJ8 firmware, so I figured I'd just download it and flash it via Odin.
Kies shows my mobile as XME (Malaysia region), but I guessed it should work just fine, and boy was I wrong.
Moments after trying to flash it, it failed, but it did manage to flash the beginning of the firmware, which was the new MJ bootloader. That newer bootloader does not allow any other firmware with older bootloader be flashed on the phone. Not even Kies's emergency recovery was able to revive my phone which was stuck in emergency download mode.
When trying to flash I got all sorts of errors, such as:
invalid ext4 image
and
CHECK FAIL : fused : 2 , Binary : 1. (when trying to install the older XME Malaysian Firmware on top of the new bootloader)
To make a very long story short, after almost giving up and start waiting for a Malaysian firmware with the new bootloader to be released, I ran across the UK MJ6 BTU rom which does have the new bootloader too and decided to try flashing it. To my amazement - this worked and my phone is back to life! phewwwww!
This is a download link to the BTU MJ6 firmware:
http://www.hotfile.com/dl/252753467/b379b8f/N9005XXUDMJ6_N9005OXADMJ4_BTU.zip.html
Hope this helps others!
P.S. If this information helped you, please click the "THANKS" button below. It's free of charge.
Click to expand...
Click to collapse
Thanks buddy for helping me, got me up and running again :good:
You're welcome, mate!
Softbrick
Thank you thank you thank you thank you .
I always liked Hong Kong roms on note one and two and I thought I can continue the tradition .
Softbricked it , and no solution anywhere . I installed this and voila . Back in business . I also installed MJ7 on top now all is good .
Have I said thank you ?
Well thank you !
budalica said:
Thank you thank you thank you thank you .
Have I said thank you ?
Well thank you !
Click to expand...
Click to collapse
You're welcome. Did you press the "Thank you" button?
Thanks a lot. Without your post, my phone will still be bricked.
hh
That day! ! Me too
Useful info, I'm sure this will be of use in many situations.
Thankyou.
Sent from my GT-I9100 using Tapatalk 4
uscool said:
Thanks buddy for helping me, got me up and running again :good:
Click to expand...
Click to collapse
could someone please upload that firmware again on some other hoster? because hostfile isnt working anymore. couldnt find the file on any other server by myself.
lalahamid said:
could someone please upload that firmware again on some other hoster? because hostfile isnt working anymore. couldnt find the file on any other server by myself.
Click to expand...
Click to collapse
Here is the newer version from UK BTU: N9005XXUDMJ7_N9005OXADMJ4_BTU.zip
http://terafile.co/29f621508415
doclucas said:
I am posting this to help people who ran across the same problem I did the past 24 hours, which drove me crazy and it was quite difficult to find any info on it.
I bought my N9005 on eBay from a Hong Kong seller. I just updated it with Kies and noticed that sammobile.com has a newer MJ8 firmware, so I figured I'd just download it and flash it via Odin.
Kies shows my mobile as XME (Malaysia region), but I guessed it should work just fine, and boy was I wrong.
Moments after trying to flash it, it failed, but it did manage to flash the beginning of the firmware, which was the new MJ bootloader. That newer bootloader does not allow any other firmware with older bootloader be flashed on the phone. Not even Kies's emergency recovery was able to revive my phone which was stuck in emergency download mode.
When trying to flash I got all sorts of errors, such as:
invalid ext4 image
and
CHECK FAIL : fused : 2 , Binary : 1. (when trying to install the older XME Malaysian Firmware on top of the new bootloader)
To make a very long story short, after almost giving up and start waiting for a Malaysian firmware with the new bootloader to be released, I ran across the UK MJ6 BTU rom which does have the new bootloader too and decided to try flashing it. To my amazement - this worked and my phone is back to life! phewwwww!
This is a download link to the BTU MJ6 firmware:
http://www.hotfile.com/dl/252753467/b379b8f/N9005XXUDMJ6_N9005OXADMJ4_BTU.zip.html
Hope this helps others!
P.S. If this information helped you, please click the "THANKS" button below. It's free of charge.
Click to expand...
Click to collapse
my brick story in short is------ brought note 3 sm-n9005 from ebay from a Hong Kong based seller. pics of ap, cp and csc are attached. rooted with chainfire's and installed cwm6 by chenglu. A few days back, flashed bobcat rom version 2(mj7) and later 3( mk2 ) without problems. Was looking for different themes .yesterday flashed balckchrome from s4 forum that also went smooth. Unfortunatly flashed another theme for s4 which was not meant for andriod version 4.3. Pretty stupid .went into bootloop. Had nandroid backup tried to restore but couldn't.
Flashed another rom mk2 from cwm. again bootloop .took the odin route and flashed stock deodesk mj7 by Djembey from this thread.
http://forum.xda-developers.com/show....php?t=2461929
Failed again. Then downloaded latest mk2 from sammobile website. The same error (invalid ext4 img) in short failed on all ccounts. Have run out of options. The last thing in mind is to wait for some new bootloader after mk2 which might rescue me as mentioned in this thread that new bootloaders might help... Any guidance will be appreciated. Thanks
@pyarajaani
Try this:
1) Get X-Note v6 custom rom.
2) Use Odin to install CWM recovery.
3) boot the phone into CWM recovery and copy the X-NOTE rom (MK2 based) to your phone or card.
4) Do a complete wipe/factory-reset from CWM
5) Install the X-NOTE rom from CWM
And let me know how it went
doclucas said:
@pyarajaani
Try this:
1) Get X-Note v6 custom rom.
2) Use Odin to install CWM recovery.
3) boot the phone into CWM recovery and copy the X-NOTE rom (MK2 based) to your phone or card.
4) Do a complete wipe/factory-reset from CWM
5) Install the X-NOTE rom from CWM
And let me know how it went
Click to expand...
Click to collapse
Why did you suggest X-Note but not another ROM?
3 reasons:
- It's MK2 based
- I am using it
- It's excellent
And besides, if the method I suggested works, he can always replace a ROM later on if he wishes.
doclucas said:
3 reasons:
- It's MK2 based
- I am using it
- It's excellent
And besides, if the method I suggested works, he can always
replace a ROM later on if he wishes.
Click to expand...
Click to collapse
Thanks for the suggestion. ..tried twice with both stock n Civato kernels.. didn't go beyond Samsung logo screen....With Civato there appears some error above the logo...pics i m attaching. .Thanks again.
doclucas said:
3 reasons:
- It's MK2 based
- I am using it
- It's excellent
And besides, if the method I suggested works, he can always replace a ROM later on if he wishes.
Click to expand...
Click to collapse
Nope, I didnt mean what is the best rom to use.
The problem is that how to bypass the bootloop issue.
pyarajaani said:
Thanks for the suggestion. ..tried twice with both stock n Civato kernels.. didn't go beyond Samsung logo screen....With Civato there appears some error above the logo...pics i m attaching. .Thanks again.
Click to expand...
Click to collapse
No need to mess with kernels.
Were u able to install cwm via odin and then boot into cwm?
doclucas said:
No need to mess with kernels.
Were u able to install cwm via odin and then boot into cwm?
Click to expand...
Click to collapse
yes...I did that n installed X note rom from cwm. BUT I suspect that cwm is not fully functional. Why I m saying this is that I have a nandroid backup of bobcat mj7 rom...which cwm isn't able to detect even. ..nevertheless. .cwm is installed.
1) Which CWM version do you have installed?
2) Did you do a full wipe/factory-reset?
3) Did you try also advanced formatting (of system partition together with the full wipe) and then install the ROM?
4) Did you try all the above with the latest TWRP recovery instead of CWM?
http://forum.xda-developers.com/showthread.php?t=2467255
Try to flash this file by cwm first and then flash any rom after you want
https://www.dropbox.com/s/bibytggk2m8npw8/Brick_Loop_FIX_Fix.zip
Sent from my SM-N9005 using Tapatalk

[Q] Help me Unroot my GT-I9300!! (Im a Beginner)

hello...i followed a video to root my Galaxy S3 GT-I9300 and it automatically installed CWM Recovery Version 1.5 (non touch) and rooted my phone...now i want to go back to stock firmware ...but the problem is i purchased my phone from SIngapore and don't know which firmware i should download from Sammobile.com to unroot .....can i use any firmware (i.e. Firmware of any region for the unlocked GS3 GT-I9300) ...will it brick my phone.??? plz help....thanks in advance...
Download same version version you have now. If you just rooted your phone os version is the same.
poslato sa elmag radija
dewgomes007 said:
hello...i followed a video to root my Galaxy S3 GT-I9300 and it automatically installed CWM Recovery Version 1.5 (non touch) and rooted my phone...now i want to go back to stock firmware ...but the problem is i purchased my phone from SIngapore and don't know which firmware i should download from Sammobile.com to unroot .....can i use any firmware (i.e. Firmware of any region for the unlocked GS3 GT-I9300) ...will it brick my phone.??? plz help....thanks in advance...
Click to expand...
Click to collapse
!!ALL QUESTIONS GO IN THE Q&A FORUM!! OR THEY MAY BE DELETED
Please use the red report button and ask a mod to move the post.
Please read the faqs and guides .
RETURN TO STOCK
http://forum.xda-developers.com/showthread.php?t=2323847
First reset your binary counter using Triangle away then try to download SuperSu app,then click on it,and search for the "fully unroot" or something like that,click on it,reboot,and you should be unrooted.

[Q] Galaxy Note N9100 (China Dual SIM Model) Root

Hi All,
Firstly SORRY for posting here. This should be in the dev thread, but I have no rights there.
I am unable to post to post in the developer thread (being newly registered) and I am hoping Chainfire can provide a root for the Galaxy Note 4 SM-N9100 China model. He has requested that the recovery.img file from the phone model's stock ROM be attached. He has already provided the root for a few other files but I see in another post, he didn't do it for this one because he couldn't download the firmware easily. I have downloaded the stock firmware and extracted the needed file.
If someone with dev posting rights can help post the attached file to this thread:
http://forum.xda-developers.com/showthread.php?t=1980683&page=55
I would be super super appreciative :fingers-crossed:
Many thanks.
For thanks in advance to Chainfire, I have just made a donation.....
.... now praying.... can't use my apps purchased on Google Play on this phone without the root.
http://download.chainfire.eu/564/CF-Root1/CF-Auto-Root-trltechn-trlteduoszc-smn9100.zip
thanks chainfire!
tried it on mine but it didn't work. had a flash write failure...
Maybe Locked Bootloader
First, big thanks to Chainfire for the super fast action!!
But yeah, I've got the same issue. The recovery.img was from sammobile for n9100, so I don't think that is the problem.
I am suspecting it is a locked bootloader. Unfortunately I'm not at the moment able to detect this as while adb is working fine, fastboot is not recognizing the device. If anyone else knows how to easily check if the bootloader is locked (and has a good way to unlock without using fastboot), everything would be great.
Fastboot not supported for n9100
Ok tried fastboot on a different PC. Doesn't work for n9100 either. Can't detect devices in bootloader mode. Adb is ok. So likely not usb issue, must be simply not available on n9100 and from searching about seems Samsung likely doesn't support fastboot for many devices.
Troubleshooting
After further research, not too sure about the bootloader being the issue. Actually the SM-N9100 is not carrier branded or locked that I could tell. If the other models' roots work, then it makes no sense for this to be the issue here.
Chainfire, I see you posted that you may replace the ROOT you made for this model. If it helps in troubleshooting, here is what happened.
1 - Downloaded the stock firmware from here: http://www.sammobile.com/firmwares/3/?download=36308
2 - Posted to you the recovery.img file from the ROM - not sure if that was the one you used. But after soft bricking my device by trying the root, I can confirm that I could reflash with the stock firmware and all went well.
3 - When trying the root, it starts no problem, but then there is a Write Fail error in Odin. If needed, I can repeat the process to provide all text and screenshots. There was no Red Android icon. The bootloader screen has some failure message and the Android icon remained green.
4 - Phone would not restart stating there was a firmware issue and that I should perform a recovery in Kies.
5 - I did not perform a recovery in Kies, but rather I reflashed (using Odin) the stock firmware. This worked ok.... but of course, I still have no root. Since the reflash worked, then I can only assume the recovery.img file is fine for my SM-N9100
I have used your Autoroot in the past for my Note 2 N7100 model, and it worked with absolutely no issue whatsoever. So I don't think the problem is that I am not following the Odin settings correctly or that I have some USB issue.
Thanks.
Further Details
I've added a screenshot of the Odin failure.
BTW, I noticed someone posted a rooting video in YouTube with this CF AutoRoot for N9100
http://www.youtube.com/watch?v=mXpPSjlzrok
Funny the video stops right before the failure and you don't see the "PASS" result in Odin!
So I don't know if anyone has been successful with this root at all!
sm-n9100
Hi
I rooted my SAMSUNG GT-N9100 with Cf-Auto root via Odin everything was ok process was passed and phone took a restart i checked the apps there was superSU but when i opened it, it just waiting and happened nothing. I restart my phone in recovery mode to update gapps or other superSu upte it giving a write error. it was not rooted you can't do anything.
since you buy N9100, so i consider u can read a few chinese (if not u can use google translate to help u)
i've seen in chinese forums they can root N9100 without problems, so i give u a few links to help
here is the step by step for root :
http://www.muzisoft.com/root/80910.html
and
in here it said u need to flash cwm first..this is the link for recovery
http://www.muzisoft.com/recovery/80827.html
and then after that u need to put supersu.zip to ur sd card, so this is the link for the supersu.zip
http://www.muzisoft.com/softs/bixu/80821.html
hope this can help root ur device
or actually u can download root apps in chinese, there are a few root apps that u can use for root the phone
Looks like the 9100 just got the recent OTA yesterday.
I'm rooted so need the full Odin flashable ANK5 from sammobile:
http://www.sammobile.com/firmwares/download/39658/N9100ZCU1ANK5_N9100CHC1ANK5_CHC.zip/
Sent from my SM-N9100
Keep getting status 3 errors with chinese CWM.
Does any one know how to get twrp installed on sm-n9100.
Root for Galaxy Note 4 Dual (Honk Kong model) N9100ZHU1BOC4 - lollipop 5.0.1
I was hoping someone with Developmet skills could help me with making a rooting file for me.
Chainfire asks for the recovery.img from the ROM. so I attacvhed it to the post. Since he has made a lot of CF auto root files available, but unfortunatly mine is not listed yet.
It the Galaxy note 4 dual sim HK version N9100ZHU1BOC4, i m running it under lollipop 5.0.1 .
I need root to recover deleted :crying: pictures.
I made a donation as well .
Thank you for your kind help.
babelina said:
I was hoping someone with Developmet skills could help me with making a rooting file for me.
Chainfire asks for the recovery.img from the ROM. so I attacvhed it to the post. Since he has made a lot of CF auto root files available, but unfortunatly mine is not listed yet.
It the Galaxy note 4 dual sim HK version N9100ZHU1BOC4, i m running it under lollipop 5.0.1 .
I need root to recover deleted :crying: pictures.
I made a donation as well .
Thank you for your kind help.
Click to expand...
Click to collapse
Cf auto root works for my N9100...
Just flash it via Odin
Or either flash cmw recovery and it will ask you upon first reboot is you want to install su.
Both work for me
Envoyé de mon SM-N9100 en utilisant Tapatalk
kokabunga said:
Cf auto root works for my N9100...
Just flash it via Odin
Or either flash cmw recovery and it will ask you upon first reboot is you want to install su.
Both work for me
Envoyé de mon SM-N9100 en utilisant Tapatalk
Click to expand...
Click to collapse
Hi,
thanks for your prompt response.
Which file have you used to flash/root ? Could you post the link or send me through PM please ?
(There is also a thread about TWRP Philz touch 6 , that apparently works to for rooting but does not allow any custom ROM )
Sent from my SM-N9100 using XDA Free mobile app
thanks i tried the 4.4.4 file on my N9100 5.01 and it worked as well!
cheers.
aliguu said:
thanks i tried the 4.4.4 file on my N9100 5.01 and it worked as well!
cheers.
Click to expand...
Click to collapse
Hi Aligu,
Thank you for your help :good: . Have you also tried to flash a custom ROM into your Dual sim N9100 ?
Does the root method for n9100 china version also works on hong Kong version without any problems.

FRP lock galaxy A3 2017 (A320F)

Hey, I tried to root my phone.
But I made a mistake.
I forgot to disable OEM Lock.
I rooted some phones before, but today i hade forget to disable it
The only possibility is to flash the stock firmware again per odin?
But I can't find the german 6.0.1 firmware.
Can you help me?
Danke!
okay go on odin mode and flash this firmware https://www.sammobile.com/firmwares/galaxy-a3-2017/SM-A320F/SEK/download/A320FXXU1AQC2/126126/ not importance of the country so flash this on odin and it will be right
if I have help you give me a thank please
I have found the right firmware.
My phone is a FL not F.
Thank you.
Now its running again, after flashing with Odin.
the_real_iceman said:
I have found the right firmware.
My phone is a FL not F.
Thank you.
Now its running again, after flashing with Odin.
Click to expand...
Click to collapse
Nice thank for your report

Convert n900v to n9005 ( international Version)

Hi - I've been lurking on XDA for quite awhile and finally took the time to create an account.
Here is my issue/need -
I have a Note 3 that I want to use in another country. I have used it as a 900v but there are a few issues, so I am wondering, If I root,etc. and load all the 9005 firmware will it then be a fully functional 9005 ??
WOW.....
Well... I find it very interesting that I create this thread asking for someone to help.. Over 100 Views and NO replies..........
Oh well... I figured it out on my own. 100% success. No Knox Trip running Stock n9005 firmware and all correct bands working :good: :good: :good:
WildThing429 said:
Well... I find it very interesting that I create this thread asking for someone to help.. Over 100 Views and NO replies..........
Oh well... I figured it out on my own. 100% success. No Knox Trip running Stock n9005 firmware and all correct bands working :good: :good: :good:
Click to expand...
Click to collapse
Would you mind sharing your method? I am quite interested in this. Being relatively new to the realm of knowledge, I would greatly appreciate your input and experience.
Howto?
WildThing429 said:
Well... I find it very interesting that I create this thread asking for someone to help.. Over 100 Views and NO replies..........
Oh well... I figured it out on my own. 100% success. No Knox Trip running Stock n9005 firmware and all correct bands working :good: :good: :good:
Click to expand...
Click to collapse
I too have been using my note 3 in telcel (mexico) without problem but I´m interested in installing a new firmware and your post seems promising. How did you do it? (I´m completely new to firmware changes) Please share! Thank you
WildThing429 said:
Well... I find it very interesting that I create this thread asking for someone to help.. Over 100 Views and NO replies..........
Oh well... I figured it out on my own. 100% success. No Knox Trip running Stock n9005 firmware and all correct bands working :good: :good: :good:
Click to expand...
Click to collapse
hi, dude. I live in Brazil and a friend gave me this phone. please, can you teach how to do it? thank you
Hi
I have the n900v, and i always install the c roms as internationals, some roms are fully funtional, the nfc is not working
the benefits
atomatic apn configuration
system phone numbers like *123 works as normal
phone calls: ok
camera: ok
data H+,3g,4g,lte: ok (depenst on the company)
play games: ok, buts its get very hot
battery: +- 3 hours 30 mint on continus use
Hi! anyone can post solution to convert N900V to N9005 please?
thank you!
Hi, I don't know if this has any relation to my problem but this is what has happened :
I wanted to add a custom rom to my SM-N900V so I upgraded it to Android 5.0 but I upgraded it to pl1 so I downgraded it to of1 and rooted using Arabic tool app. I flashed twrp through Odin and flashed hyper drive custom rom but that rom was rubbish. So I decided to switch to Aryamod rom and flashed it through twrp but after rebooting got stuck on Note 3 logo on searching I found out that the stock kernel has to be replaced with darklord kernel so I used Odin to flash it and on rebooting I got past the note 3 logo but got stuck on Samsung logo (it was blinking) after waiting for 20 min I again started searching on xda, I found out that before flashing Aryamod you have to be on stock 5.0 firmware. So I again used Odin to flash 5.0 but it failed so I tried again and this time it worked ,then I again rooted using Arabic tool and after successful rooting when I plug in my phone to my PC to unlock it's boot loader the phone only charges and I don't get and USB options on my phone, Odin does not detect any device neither does the Arabic tool and when I see the list of and devices there is none. I reinstalled the drivers of my phone tried many cables and different ports disabled and enabled USB debugging 100 times and even dialed ##366633# and disabled and enable dm mode from there also but all without any luck. I really want to connect it to my PC to flash stock firmware again. Pls help me.

Categories

Resources