FRP lock galaxy A3 2017 (A320F) - Galaxy A3, A5, A7, A8, A9 Q&A, Help & Troubleshoot

Hey, I tried to root my phone.
But I made a mistake.
I forgot to disable OEM Lock.
I rooted some phones before, but today i hade forget to disable it
The only possibility is to flash the stock firmware again per odin?
But I can't find the german 6.0.1 firmware.
Can you help me?
Danke!

okay go on odin mode and flash this firmware https://www.sammobile.com/firmwares/galaxy-a3-2017/SM-A320F/SEK/download/A320FXXU1AQC2/126126/ not importance of the country so flash this on odin and it will be right
if I have help you give me a thank please

I have found the right firmware.
My phone is a FL not F.
Thank you.
Now its running again, after flashing with Odin.

the_real_iceman said:
I have found the right firmware.
My phone is a FL not F.
Thank you.
Now its running again, after flashing with Odin.
Click to expand...
Click to collapse
Nice thank for your report

Related

Solution for soft-bricked N9005 after flashing Hong Kong's TGY firmware

I am posting this to help people who ran across the same problem I did the past 24 hours, which drove me crazy and it was quite difficult to find any info on it.
I bought my N9005 on eBay from a Hong Kong seller. I just updated it with Kies and noticed that sammobile.com has a newer MJ8 firmware, so I figured I'd just download it and flash it via Odin.
Kies shows my mobile as XME (Malaysia region), but I guessed it should work just fine, and boy was I wrong.
Moments after trying to flash it, it failed, but it did manage to flash the beginning of the firmware, which was the new MJ bootloader. That newer bootloader does not allow any other firmware with older bootloader be flashed on the phone. Not even Kies's emergency recovery was able to revive my phone which was stuck in emergency download mode.
When trying to flash I got all sorts of errors, such as:
invalid ext4 image
and
CHECK FAIL : fused : 2 , Binary : 1. (when trying to install the older XME Malaysian Firmware on top of the new bootloader)
To make a very long story short, after almost giving up and start waiting for a Malaysian firmware with the new bootloader to be released, I ran across the UK MJ6 BTU rom which does have the new bootloader too and decided to try flashing it. To my amazement - this worked and my phone is back to life! phewwwww!
This is a download link to the BTU MJ6 firmware:
http://www.hotfile.com/dl/252753467/b379b8f/N9005XXUDMJ6_N9005OXADMJ4_BTU.zip.html
Hope this helps others!
P.S. If this information helped you, please click the "THANKS" button below. It's free of charge.
doclucas said:
I am posting this to help people who ran across the same problem I did the past 24 hours, which drove me crazy and it was quite difficult to find any info on it.
I bought my N9005 on eBay from a Hong Kong seller. I just updated it with Kies and noticed that sammobile.com has a newer MJ8 firmware, so I figured I'd just download it and flash it via Odin.
Kies shows my mobile as XME (Malaysia region), but I guessed it should work just fine, and boy was I wrong.
Moments after trying to flash it, it failed, but it did manage to flash the beginning of the firmware, which was the new MJ bootloader. That newer bootloader does not allow any other firmware with older bootloader be flashed on the phone. Not even Kies's emergency recovery was able to revive my phone which was stuck in emergency download mode.
When trying to flash I got all sorts of errors, such as:
invalid ext4 image
and
CHECK FAIL : fused : 2 , Binary : 1. (when trying to install the older XME Malaysian Firmware on top of the new bootloader)
To make a very long story short, after almost giving up and start waiting for a Malaysian firmware with the new bootloader to be released, I ran across the UK MJ6 BTU rom which does have the new bootloader too and decided to try flashing it. To my amazement - this worked and my phone is back to life! phewwwww!
This is a download link to the BTU MJ6 firmware:
http://www.hotfile.com/dl/252753467/b379b8f/N9005XXUDMJ6_N9005OXADMJ4_BTU.zip.html
Hope this helps others!
P.S. If this information helped you, please click the "THANKS" button below. It's free of charge.
Click to expand...
Click to collapse
Thanks buddy for helping me, got me up and running again :good:
You're welcome, mate!
Softbrick
Thank you thank you thank you thank you .
I always liked Hong Kong roms on note one and two and I thought I can continue the tradition .
Softbricked it , and no solution anywhere . I installed this and voila . Back in business . I also installed MJ7 on top now all is good .
Have I said thank you ?
Well thank you !
budalica said:
Thank you thank you thank you thank you .
Have I said thank you ?
Well thank you !
Click to expand...
Click to collapse
You're welcome. Did you press the "Thank you" button?
Thanks a lot. Without your post, my phone will still be bricked.
hh
That day! ! Me too
Useful info, I'm sure this will be of use in many situations.
Thankyou.
Sent from my GT-I9100 using Tapatalk 4
uscool said:
Thanks buddy for helping me, got me up and running again :good:
Click to expand...
Click to collapse
could someone please upload that firmware again on some other hoster? because hostfile isnt working anymore. couldnt find the file on any other server by myself.
lalahamid said:
could someone please upload that firmware again on some other hoster? because hostfile isnt working anymore. couldnt find the file on any other server by myself.
Click to expand...
Click to collapse
Here is the newer version from UK BTU: N9005XXUDMJ7_N9005OXADMJ4_BTU.zip
http://terafile.co/29f621508415
doclucas said:
I am posting this to help people who ran across the same problem I did the past 24 hours, which drove me crazy and it was quite difficult to find any info on it.
I bought my N9005 on eBay from a Hong Kong seller. I just updated it with Kies and noticed that sammobile.com has a newer MJ8 firmware, so I figured I'd just download it and flash it via Odin.
Kies shows my mobile as XME (Malaysia region), but I guessed it should work just fine, and boy was I wrong.
Moments after trying to flash it, it failed, but it did manage to flash the beginning of the firmware, which was the new MJ bootloader. That newer bootloader does not allow any other firmware with older bootloader be flashed on the phone. Not even Kies's emergency recovery was able to revive my phone which was stuck in emergency download mode.
When trying to flash I got all sorts of errors, such as:
invalid ext4 image
and
CHECK FAIL : fused : 2 , Binary : 1. (when trying to install the older XME Malaysian Firmware on top of the new bootloader)
To make a very long story short, after almost giving up and start waiting for a Malaysian firmware with the new bootloader to be released, I ran across the UK MJ6 BTU rom which does have the new bootloader too and decided to try flashing it. To my amazement - this worked and my phone is back to life! phewwwww!
This is a download link to the BTU MJ6 firmware:
http://www.hotfile.com/dl/252753467/b379b8f/N9005XXUDMJ6_N9005OXADMJ4_BTU.zip.html
Hope this helps others!
P.S. If this information helped you, please click the "THANKS" button below. It's free of charge.
Click to expand...
Click to collapse
my brick story in short is------ brought note 3 sm-n9005 from ebay from a Hong Kong based seller. pics of ap, cp and csc are attached. rooted with chainfire's and installed cwm6 by chenglu. A few days back, flashed bobcat rom version 2(mj7) and later 3( mk2 ) without problems. Was looking for different themes .yesterday flashed balckchrome from s4 forum that also went smooth. Unfortunatly flashed another theme for s4 which was not meant for andriod version 4.3. Pretty stupid .went into bootloop. Had nandroid backup tried to restore but couldn't.
Flashed another rom mk2 from cwm. again bootloop .took the odin route and flashed stock deodesk mj7 by Djembey from this thread.
http://forum.xda-developers.com/show....php?t=2461929
Failed again. Then downloaded latest mk2 from sammobile website. The same error (invalid ext4 img) in short failed on all ccounts. Have run out of options. The last thing in mind is to wait for some new bootloader after mk2 which might rescue me as mentioned in this thread that new bootloaders might help... Any guidance will be appreciated. Thanks
@pyarajaani
Try this:
1) Get X-Note v6 custom rom.
2) Use Odin to install CWM recovery.
3) boot the phone into CWM recovery and copy the X-NOTE rom (MK2 based) to your phone or card.
4) Do a complete wipe/factory-reset from CWM
5) Install the X-NOTE rom from CWM
And let me know how it went
doclucas said:
@pyarajaani
Try this:
1) Get X-Note v6 custom rom.
2) Use Odin to install CWM recovery.
3) boot the phone into CWM recovery and copy the X-NOTE rom (MK2 based) to your phone or card.
4) Do a complete wipe/factory-reset from CWM
5) Install the X-NOTE rom from CWM
And let me know how it went
Click to expand...
Click to collapse
Why did you suggest X-Note but not another ROM?
3 reasons:
- It's MK2 based
- I am using it
- It's excellent
And besides, if the method I suggested works, he can always replace a ROM later on if he wishes.
doclucas said:
3 reasons:
- It's MK2 based
- I am using it
- It's excellent
And besides, if the method I suggested works, he can always
replace a ROM later on if he wishes.
Click to expand...
Click to collapse
Thanks for the suggestion. ..tried twice with both stock n Civato kernels.. didn't go beyond Samsung logo screen....With Civato there appears some error above the logo...pics i m attaching. .Thanks again.
doclucas said:
3 reasons:
- It's MK2 based
- I am using it
- It's excellent
And besides, if the method I suggested works, he can always replace a ROM later on if he wishes.
Click to expand...
Click to collapse
Nope, I didnt mean what is the best rom to use.
The problem is that how to bypass the bootloop issue.
pyarajaani said:
Thanks for the suggestion. ..tried twice with both stock n Civato kernels.. didn't go beyond Samsung logo screen....With Civato there appears some error above the logo...pics i m attaching. .Thanks again.
Click to expand...
Click to collapse
No need to mess with kernels.
Were u able to install cwm via odin and then boot into cwm?
doclucas said:
No need to mess with kernels.
Were u able to install cwm via odin and then boot into cwm?
Click to expand...
Click to collapse
yes...I did that n installed X note rom from cwm. BUT I suspect that cwm is not fully functional. Why I m saying this is that I have a nandroid backup of bobcat mj7 rom...which cwm isn't able to detect even. ..nevertheless. .cwm is installed.
1) Which CWM version do you have installed?
2) Did you do a full wipe/factory-reset?
3) Did you try also advanced formatting (of system partition together with the full wipe) and then install the ROM?
4) Did you try all the above with the latest TWRP recovery instead of CWM?
http://forum.xda-developers.com/showthread.php?t=2467255
Try to flash this file by cwm first and then flash any rom after you want
https://www.dropbox.com/s/bibytggk2m8npw8/Brick_Loop_FIX_Fix.zip
Sent from my SM-N9005 using Tapatalk

HELP!! flashing fimware through odin failed on samsun galaxy grand prime

I flashed the latest update of firmware of galaxy grand prime through odin but when i click start it fails to flash the firmware.. is it because of the knox? Or what?. Anyone here can help me..? :crying:
daganteng15 said:
I flashed the latest update of firmware of galaxy grand prime through odin but when i click start it fails to flash the firmware.. is it because of the knox? Or what?. Anyone here can help me..? :crying:
Click to expand...
Click to collapse
Is your phone still working? Which firmware is actually installed? Which firmware you want to flash?
regards
LS.xD said:
Is your phone still working? Which firmware is actually installed? Which firmware you want to flash?
regards
Click to expand...
Click to collapse
I buy my grand prime last year.. dec.. there are some updates from sammobile for my grand prime i downloaded.. i have flashed it but failed.. i tried it many times but. Still the same. I downloaded the correct firmware and region.. and also in the ota it also says the latest updates have been installed.. but there are already two updates of it..can you help me for this sir?.
daganteng15 said:
I buy my grand prime last year.. dec.. there are some updates from sammobile for my grand prime i downloaded.. i have flashed it but failed.. i tried it many times but. Still the same. I downloaded the correct firmware and region.. and also in the ota it also says the latest updates have been installed.. but there are already two updates of it..can you help me for this sir?.
Click to expand...
Click to collapse
Please tell me which firmware version is actually installed and which version you want to flash? Which region is your phone?
@LS.xD
i have the same problem with daganteng15, my current firmware installed on my galaxy grand prime is with CSC G530HOLB1ANL1 (XTC openline for Philippines) and now there is two new update in sammobile which is with CSC G530HOLB1ANL3 and the latest CSC G530HOLBAOA2 i tried to flash this two new firmware via ODIN 3.09 but both failed, in ODIN it always say "Fail Auth"
i am sure that i downloaded the correct firmarwe for our region. can you help us Please...
Thanks in advance.
3xhon said:
@LS.xD
i have the same problem with daganteng15, my current firmware installed on my galaxy grand prime is with CSC G530HOLB1ANL1 (XTC openline for Philippines) and now there is two new update in sammobile which is with CSC G530HOLB1ANL3 and the latest CSC G530HOLBAOA2 i tried to flash this two new firmware via ODIN 3.09 but both failed, in ODIN it always say "Fail Auth"
i am sure that i downloaded the correct firmarwe for our region. can you help us Please...
Thanks in advance.
Click to expand...
Click to collapse
Yah.. were the same.. there are two new update on grand prime XTC Philippines (open line) but cant flash in odin. And also can not update the device in OTA. Please help.
This device have secure bootloader, so might be the reason u cant flash updated firmware, only OTA update. IMO need to unlock bootloader first if wanna success flash through odin.
Until now, the way to unlock this device bootloader is unavailable.
Shinkumara said:
This device have secure bootloader, so might be the reason u cant flash updated firmware, only OTA update. IMO need to unlock bootloader first if wanna success flash through odin.
Until now, the way to unlock this device bootloader is unavailable.
Click to expand...
Click to collapse
To upgrade the device is not necesarry to download the firmware of the respective region, u can flash any version of firmware for another regions, the only need to know is the respective version of firmware is for your device only that, i have flashed many firmware in my prime without issues ever from other regions ( most actual than my original region ) and y device is working ike a charm
Have you rooted the phone?
Can u elaborate what means.of.respective version please? u said that u flash many firmware for ur prime, which.one firmware have u been flashed successfully @tutibreaker
Hello guys I have solve this issue by flashing different firmware I used Nepal firmware. XTC firmware is corrupted.
You can use different region firmware if your phone is openline.
You can read my posts here
http://forum.xda-developers.com/gra...ully-rooted-galaxy-grand-prime-t2935607/page8
Shinkumara said:
Can u elaborate what means.of.respective version please? u said that u flash many firmware for ur prime, which.one firmware have u been flashed successfully @tutibreaker
Click to expand...
Click to collapse
no i dont flash many versions in my device, just flash the latest update from other region and works fine, the region is not important
Hey, same problem here. I can't flash any firmware. Odin just errors: Failed [Auth].
And since I've rooted my Grand Prime, I'm not able to update it via OTA
What am I supposed to do?!
Recently I've faced some lags on my phone that I don't know why, but I think I need to update my firmware.
Apocalypse Now said:
Hey, same problem here. I can't flash any firmware. Odin just errors: Failed [Auth].
And since I've rooted my Grand Prime, I'm not able to update it via OTA
What am I supposed to do?!
Recently I've faced some lags on my phone that I don't know why, but I think I need to update my firmware.
Click to expand...
Click to collapse
What firmware did you flash? If its XTC then you should try other region firmware like Malaysia or Indonesia. XTC firmware is corrupted.
vancer32 said:
What firmware did you flash? If its XTC then you should try other region firmware like Malaysia or Indonesia. XTC firmware is corrupted.
Click to expand...
Click to collapse
Solved it. Thanks. I should have flashed a newer version of firmware; I flashed Kazakhstan and it went OK.
daganteng15 said:
I flashed the latest update of firmware of galaxy grand prime through odin but when i click start it fails to flash the firmware.. is it because of the knox? Or what?. Anyone here can help me..? :crying:
Click to expand...
Click to collapse
You have to flash exact soft for your region and phone. Grand Prime have many versions so you must select right one. In East Europe there is no secure bootloader or maybe I haven't encountered it yet. If you have secured bootloader so probably it's gonna be same like Sony or HTC. You'll have to unlock it. I can't say where
daganteng15 said:
I flashed the latest update of firmware of galaxy grand prime through odin but when i click start it fails to flash the firmware.. is it because of the knox? Or what?. Anyone here can help me..? :crying:
Click to expand...
Click to collapse
Just open your odin then firstly do not connect your device before . Add the files to AP first and then you can connect your device into odin or that firmware you've download did not match .
And did you solve that problem guys?
awha said:
Just open your odin then firstly do not connect your device before . Add the files to AP first and then you can connect your device into odin or that firmware you've download did not match .
Click to expand...
Click to collapse
The order did not do any difference. Why should it do?!
Before a chance the rom, I rooted my cellphone by this way
[ androidxda. com/root-samsung-galaxy-grand-prime-sm-g530h ]
It worked!
As someone said here, I should need to unlock the bootloader, I looked for I solution and I find this one
[ techtudo. com.br/dicas-e-tutoriais/noticia/2014/07/como-destravar-o-bootloader-de-um-dispositivo-android.html ]
this site is in portuguese-Br
it did not work
so, I installed samsung kies, and odin 3.04. And also didn't worked.
Now, I installed CMW recovery
[ mediafire .com/download/w0gzfrq7xtvztdr/Galaxy+Grand+Prime+CWM+Recovery.zip ]
still the same
finally, I downloaded odin 3.10.6, and instal a rom from india. As I find here [ droidviews .com/install-android-5-0-2-lollipop-firmware-on-galaxy-grand-prime-sm-g530h/ ]
Before I was trying Russia's rom.
After all, I noticed, and I read here, that depends on firmware which I was intalling

Question about rooting Australian i9506

Recently came into possession of a i9056 and it runs i9506xxucnk1 . Anybody know if the usual rooting method with odin works fine with the AU version of the phone? Would appreciate any thoughts on the subject.
Yes, it does.
Sent from my GT-I9500
First Goto Google.com>Chainfire. Com/i9506>download Su..
Now
Flash it through Odin after going on Download mode by pressing Power+VolumeUp flash the zip now ure rooted
Thanks for the info guys!

Galaxy On 5 softbrick fix after flashing failed with reactivation lock on

Hello, guys. I have a SM-G5510, China rom. And I've flashed a new global rom on it but did not turn off the reactivation lock. So now I wonder if you guys know how to unblock it from odin or stock recovery so I can complete the flash. My phone is now being softbrick and cannot be flashed.
Thanks for your help
Duc Nguyen said:
Hello, guys. I have a SM-G5510, China rom. And I've flashed a new global rom on it but did not turn off the reactivation lock. So now I wonder if you guys know how to unblock it from odin or stock recovery so I can complete the flash. My phone is now being softbrick and cannot be flashed.
Thanks for your help
Click to expand...
Click to collapse
if you have got any method plz tell me i have the same issue

HELP!!! My Galaxy S7 Edge got Bricked!

Hello everyone,
My device got bricked since I flashed it with Odin yesterday, and now even I re-flash using official firmware, it failed as well……
The model of my phone showing in Samsung official site is G935-P (Sprint version), But that shows on download mode is G935U, maybe the eBay seller had flashed it with G935U firmware…
What version of firmware should I download to recover the OS now? And what could I do to Un-brick my device? Someone who could give me some advice or assistance? Thank you all!
Try Smart Switch. It will automatically download the correct firmware for you.
Hmmmmm what update were you trying to flash in odin and i would check the back of your phone bc it should say exactly what model it is (935x) just to be sure then flash the LASTEST firmware to get yourself up and running then if you want Ufirmware go ahead flash that
AndrOmega said:
Try Smart Switch. It will automatically download the correct firmware for you.
Click to expand...
Click to collapse
Thanks, I've tried Smart switch, but it doesn't work, fortunately, it's resolved by flashing the latest G935U firmware
gurnsey101 said:
Hmmmmm what update were you trying to flash in odin and i would check the back of your phone bc it should say exactly what model it is (935x) just to be sure then flash the LASTEST firmware to get yourself up and running then if you want Ufirmware go ahead flash that
Click to expand...
Click to collapse
You're right bro, it was resolved by flashing the latest firmware of G935U, thanks a lot
No problem glad I could help

Categories

Resources