Hey, can i replace my N910F's Mainboard with N910A's one ? My motherboard is not working and i need to change it.
Many regards.
I have the same issue. My internal flash has gone bonkers and I guess I need to replace the entire mainboard. Have found some really cheap N910F ones at aliexpress claiming they're original. Anyone tried this?
Related
Hello all,
My XDA Orbit died while not-official unlocking attempt. Bootloader not responding. Is it possible to reanimate it?
Guess, it needs to replace the flash module (MS25-D10SD9-B3-P) with pre-programmed one, or just to reprogramm old one using test-points on motherboard (if it is possible). I can't find datasheet of MS25-D10SD9-B3-P and so can't answer what exactly should be done. May be anybody has another ideas (or diagnosis ). Thank you in Advance
Hello !
I post this here, because I don't think I'll find any solution using software method.
I flashed my rooted honor 7 PLK-L01 with a possibly wrong firmware ( UPDATE 170, originally for plk-l01?!) and it won't boot at all now.
I just get a vibration while pressing voldown+volup+start for 15 secs, but it won't get recognized by usb, even after pulling out the batterie manually.
After some research I've foud that my bootloader/preloader is dead, and the only ways would be using a copper wire to connect two pins, or to use a JTAG tester.
Unfortunately, I don't know how to recognize the pins, how it works, how to flash a rom with that.... and I can't find this informations for my phone, and I'm really a newbie in phone hardware.
For information, I got all we need for phone repairing, and I've heard somewhere that we can make a JTAG with an arduino.
Do someone could help me ? I am a bit lost, and I really want to get my phone back to life x(
Thanks for anything that could help, even small informations !!
have a nice day/night/anything !
PS : sorry if my english isn't perfect, I'm trying to improve it every days.
Hello,
I got the exact same problem. Has anyone found a solution yet ?
Thanks for your help !
Hello, I come from France and I've the same problem, my phone was rooted and I did an update from EMUI and ,unfortunately, my phone has been bricked. There is just a vibration when I press On + down volume. I also saw many JTAG issues for many Huawei phones but not for the Honor 7(PLK-L01). Maybe some developers are working on JTAG for this phone (or not). The idea is to find the famous Golden boot point and short this point to ground (GND). I tried to do this but I didn't succeed...
PS: Sorry if my english is not correct
I somehow broke the inside screen and cracked it, and it was rooted and had posed installed so I really don't wanna get a new one. Would it be too expensive to buy and have someone else install it if possible or could I? Really need help on this and couldn't find anyone so plz help me, would really appreciate it! P.S. plz post a link to anything helpful, would be great.
. .
\______________
Hello guys. First of all, I would like to apologize if this type of problem and solution already appeared before in this forum. I've been searching for any similar situation with mine but couldn't find anything
buy ali express HU ezonetronics RM-CT0013 originally came with android 6.1 then update it to 7.1 with this file provided by the manufacturer ezonetronics
after this the HU worked well until I wanted to perform a factory reset and it did not work
I do not have more information from the HU, ezonetronics has not given me support, I hope that one of you can help me get back to work
Hi, maybe I can try and help. I believe I've the same unit, single din with Android logo on front? Were you given an Update.zip file? Mine is working but I can't seem to find anyone else with the same device but I'm somewhat technical and maybe able to help. What does and doesn't happen exactly? Also, do you have a link to the update they sent you?
lechy said:
Hi, maybe I can try and help. I believe I've the same unit, single din with Android logo on front? Were you given an Update.zip file? Mine is working but I can't seem to find anyone else with the same device but I'm somewhat technical and maybe able to help. What does and doesn't happen exactly? Also, do you have a link to the update they sent you?
Click to expand...
Click to collapse
HI Lechy thanks for reply I sent you an MP with info:good:
Hi all i have a mxq-4k that needs firmware it has a h124 4.42 mother board and the sticker on the back says mxq-3229-V4.42 HXW17072601-02. I have also attached pics of motherboard any help would be greatly appreciated
Tigerwins said:
Hi all i have a mxq-4k that needs firmware it has a h124 4.42 mother board and the sticker on the back says mxq-3229-V4.42 HXW17072601-02. I have also attached pics of motherboard any help would be greatly appreciated
Click to expand...
Click to collapse
Look here
https://chinagadgetsreviews.com/download-android-martshmallow-6-0-firmware-for-mxq-4k-tv-box.html