Hello all,
My XDA Orbit died while not-official unlocking attempt. Bootloader not responding. Is it possible to reanimate it?
Guess, it needs to replace the flash module (MS25-D10SD9-B3-P) with pre-programmed one, or just to reprogramm old one using test-points on motherboard (if it is possible). I can't find datasheet of MS25-D10SD9-B3-P and so can't answer what exactly should be done. May be anybody has another ideas (or diagnosis ). Thank you in Advance
Related
Hi all,
Does anybody now a other method then JTAG to get my bootloader back?
When the XDA is turned on it's displays only T-Mobile
Any help would be appreciated!!
Hi all!
I really need a original o2 rom (german). Since yesterday my touchscreen doesn't work anymore...nothing helps either soft or hardreset :/
I flashed my xda mini with a german t-mobile rom...works for a week, but after a hardreset yesterday the screen doesn't response on any touch.
An o2 Staff-Member in our local Shop told me (quietly) that I won't have any chance to get a new one, if it's so obvious that i flashed the device(No matter that I didn't make a mistake!) And I think it's very obvious if an xda boots with a t-mobile-logo^^ But a software-reason for the defective Touchscreen isn't probable, isnt it?
So i have to flash the xda mini with the original rom before i send it to O2 , by the way the only thing that i can do now with this device, cause I'm not able to finish the Touchscreen-Setup(hardreset) ...
I found the demand for the german o2-rom very oftenin this Forum, but mostly the answer is 'don't let the branding(t-mobile) get installed' etc. This doesn't help me, sorry! I didn't want the t-mobile-rom, i just did not think about the possibility that the shipped roms on the ftp are not from O2(could a admin rename this files, this happens to many pepole). It's was very angry to install the o2software 'by foot', but not the end of life^^
Now I really need this original rom! Couldn't anybode with a german xda mini take the time and make me and all the others happy with this rom?
I searched this rom the hole day, here and with google and didn't found it!
Please!
Big Thanks in advance!!!
Mattez
If anybody has nothing to do (and no german xda mini) he/she could correct my bad english (sorry!)
Plz help me...
I'am a student and my Magician is the only way to reach me wirthout internet! I can't belief that here isn't somebody who has the rom, is able to make/get it or know where I can found it, even i searched a lot now.
Plz help me, if its possible...!
If I can help you,I will do it
so far
MatteZ
Hello,
Just have a look at this thread :
http://forum.xda-developers.com/viewtopic.php?t=40993
Regards
Big thanks for this hint! You saved my day
How can i thank you?^^
What's about uploading it to the ftp for al the others?
I would do this, no prob!
I didn't want the t-mobile-rom, i just did not think about the possibility that the shipped roms(german) on the ftp are not from O2(could a admin rename this files, this happens to many pepole).
Click to expand...
Click to collapse
Perhaps this would save many beginners from doing the same stupid mistake, I must confess that a well-meaned advice to make a backup often is ignored to fast,I learned my leasson!
greetz and thx!
MatteZ
Sorry if the post has already been mentioned in another forum before.
I have an O2 XDA Orbit and i'm looking to put Fracoons Artermis rom on it http://forum.xda-developers.com/show...o♦.
I'm pretty new to flashing phones and PDA's but i'm quite experienced with a PC so shouldnt need to much help!
I was wondering what steps I should ensure to take to make sure that I dont turn it into a brick, I could do with a complete guide! I've also been told that i'll need to run the Artermus USPL program after connecting the phone. But any help and advice would be a great help. Is there anyway to backup the phone in the state it is at present if or if it doesnt go wrong?
Thankyou for the help and sorry again i've this has already been asked by someone else! Will really appreciated it!
Please if anyone can help me with my querys it would be such a help as to avoid turning my phone into a brick. I really want WM6 and the touch flo system! But would also like to know anymore information!
Many thanks, Lee.
Hi,
I've found jtag pinout for HTC prohpet G4,
HTC Prophet Jtag Pinout
I've killed my device during update, and as far as i know i must use Jtag to unbrick my device,
I've built Xilinx DLC5 JTAG Parallel Cable III for this,but donno how to do that...
so i donno which adapter or software i need to use for jtaging the device,
where can i download the bootloader file to flash into my device?
i'm asking because i donno how to do this at all !
can anyone help me to do this ?
I need a complete step by step solution for this questions.
Thanx...
Any luck with that?
Hello !
I post this here, because I don't think I'll find any solution using software method.
I flashed my rooted honor 7 PLK-L01 with a possibly wrong firmware ( UPDATE 170, originally for plk-l01?!) and it won't boot at all now.
I just get a vibration while pressing voldown+volup+start for 15 secs, but it won't get recognized by usb, even after pulling out the batterie manually.
After some research I've foud that my bootloader/preloader is dead, and the only ways would be using a copper wire to connect two pins, or to use a JTAG tester.
Unfortunately, I don't know how to recognize the pins, how it works, how to flash a rom with that.... and I can't find this informations for my phone, and I'm really a newbie in phone hardware.
For information, I got all we need for phone repairing, and I've heard somewhere that we can make a JTAG with an arduino.
Do someone could help me ? I am a bit lost, and I really want to get my phone back to life x(
Thanks for anything that could help, even small informations !!
have a nice day/night/anything !
PS : sorry if my english isn't perfect, I'm trying to improve it every days.
Hello,
I got the exact same problem. Has anyone found a solution yet ?
Thanks for your help !
Hello, I come from France and I've the same problem, my phone was rooted and I did an update from EMUI and ,unfortunately, my phone has been bricked. There is just a vibration when I press On + down volume. I also saw many JTAG issues for many Huawei phones but not for the Honor 7(PLK-L01). Maybe some developers are working on JTAG for this phone (or not). The idea is to find the famous Golden boot point and short this point to ground (GND). I tried to do this but I didn't succeed...
PS: Sorry if my english is not correct