Related
hi every one
i have upgrade to 4.4.2 recently
few hours ago i did wipe data from recovery BUT the device has stopped wiping idk how its not responding i I took out the battery
next i have flashed a ZTO rom 4.4.2 after it gave me Pass in odin it goes to recovery and gives me a red Exclamation mark and rebooting
And so on looping recovery
i have tryed :
1- flash rom again
2- install cwm
3- flash different rom
and no soulotin any help ???
XQ55.amr said:
hi every one
i have upgrade to 4.4.2 recently
few hours ago i did wipe data from recovery BUT the device has stopped wiping idk how its not responding i I took out the battery
next i have flashed a ZTO rom 4.4.2 after it gave me Pass in odin it goes to recovery and gives me a red Exclamation mark and rebooting
And so on looping recovery
i have tryed :
1- flash rom again
2- install cwm
3- flash different rom
and no soulotin any help ???
Click to expand...
Click to collapse
Is this ZTO rom for N9005?
hey_joe said:
Is this ZTO rom for N9005?
Click to expand...
Click to collapse
the zto region rom
N9005VJUENB4 firmware version for Galaxy Note 3 (Snapdragon) (SM-N9005) from region ZTO!
Firmware Version Info
(PDA: N9005VJUENB4 CSC: N9005ZTOENB5 MODEM: N9005VJUENB1 CHANGELIST: 638180 BUILD DATE: 14.02.2014)
XQ55.amr said:
the zto region rom
N9005VJUENB4 firmware version for Galaxy Note 3 (Snapdragon) (SM-N9005) from region ZTO!
Firmware Version Info
(PDA: N9005VJUENB4 CSC: N9005ZTOENB5 MODEM: N9005VJUENB1 CHANGELIST: 638180 BUILD DATE: 14.02.2014)
Click to expand...
Click to collapse
Flash it again but this time use this pit file with it.
hey_joe said:
Flash it again but this time use this pit file with it.
Click to expand...
Click to collapse
can you give me the pit file ?
XQ55.amr said:
can you give me the pit file ?
Click to expand...
Click to collapse
I purposely deleted the pit file because it was meant for the Germany NB4 release. But if you want to try it, get it here.
hey_joe said:
I purposely deleted the pit file because it was meant for the Germany NB4 release. But if you want to try it, get it here.
Click to expand...
Click to collapse
is it safe to flash >?? i have brick my s3 with that file called PIT
XQ55.amr said:
is it safe to flash >?? i have brick my s3 with that file called PIT
Click to expand...
Click to collapse
That's the reason I edited out the link because I'm not sure if it will brick your phone as it's from a different region.
---------- Post added at 06:18 PM ---------- Previous post was at 06:14 PM ----------
hey_joe said:
That's the reason I edited out the link because I'm not sure if it will brick your phone as it's from a different region.
Click to expand...
Click to collapse
Is the ZTO NB4 the one meant for your phone/carrier or it was bought from overseas/different region?
hey_joe said:
That's the reason I edited out the link because I'm not sure if it will brick your phone as it's from a different region.
---------- Post added at 06:18 PM ---------- Previous post was at 06:14 PM ----------
Is the ZTO NB4 the one meant for your phone/carrier or it was bought from overseas/different region?
Click to expand...
Click to collapse
i live in KSA we still didnt get the kitkat
XQ55.amr said:
i live in KSA we still didnt get the kitkat
Click to expand...
Click to collapse
The pit might work, check this.
hey_joe said:
The pit might work, check this.
Click to expand...
Click to collapse
ٌٌٌReally iam scared
any Other Solution's ???
XQ55.amr said:
ٌٌٌReally iam scared
any Other Solution's ???
Click to expand...
Click to collapse
You can try flashing it again using a different version of odin ( check link I gave you ), can also try ticking repartition.
Sent from my SM-N900W8 using xda app-developers app
Hello, i have a galaxy s5 SM-G900H that was hanging on logo...i tried flashing with odin and flashing failed then stuck on firmware upgrade encountered an issue...pls help or can someone link me to a firmware with more than one file and pit file....? thanks.
http://forum.xda-developers.com/showthread.php?t=2793474
Sent from my SM-G900H using Tapatalk
drakester09 said:
http://forum.xda-developers.com/showthread.php?t=2793474
Sent from my SM-G900H using Tapatalk
Click to expand...
Click to collapse
Thanks for the link but how do i get correct firmware...the phone was stuck on logo when i received it...
I flashed with G900HXXU1ANCI_G900HOJV1ANCH now i can get into download mode but still odin flash fail...help?????
Same issue
andrew21 said:
I flashed with G900HXXU1ANCI_G900HOJV1ANCH now i can get into download mode but still odin flash fail...help?????
Click to expand...
Click to collapse
I have same problem while trying to flash Stock rom From Other country?
at the end of flashing the rom fail:crying:
I need pit file for g900h 16gb UAE region....someone please upload, thanks
andrew21 said:
I flashed with G900HXXU1ANCI_G900HOJV1ANCH now i can get into download mode but still odin flash fail...help?????
Click to expand...
Click to collapse
andrew21 said:
I need pit file for g900h 16gb UAE region....someone please upload, thanks
Click to expand...
Click to collapse
There's a firmware for United Arab Emirates on SamMobile, why not flash that one? Assuming with UEA you meant United Arab Emirates, but the actual region code (in Kies) is one listed on SamMobile for that country, right?
I have a G900H with THR code, meant for Iran, but there's no firmware available for that device, so I'm not sure if I can flash another country or will automatically end-up with a bricked device?
3c said:
There's a firmware for United Arab Emirates on SamMobile, why not flash that one? Assuming with UEA you meant United Arab Emirates, but the actual region code (in Kies) is one listed on SamMobile for that country, right?
I have a G900H with THR code, meant for Iran, but there's no firmware available for that device, so I'm not sure if I can flash another country or will automatically end-up with a bricked device?
Click to expand...
Click to collapse
I tried flashing firmware for UAE region....still fail
any help?
andrew21 said:
I tried flashing firmware for UAE region....still fail
any help?
Click to expand...
Click to collapse
for those who have the specific issue just try flash with odin custom recovery it works
Airboner said:
for those who have the specific issue just try flash with odin custom recovery it works
Click to expand...
Click to collapse
CAn you tell me where to get custom recovery and how to flash it?
Guys, just last week I faced the same problem..
My mistake was in choosing correct Region. Then I found my country code (TML), simply move the cursor in Region list, and it'll display country name..
Check link here.
http://samsung-updates.com/device/?id=SM-G900H&details=Galaxy_S5__Exynos_Octa
It's Official.
Sent from my SM-G900H using Tapatalk
---------- Post added at 07:34 PM ---------- Previous post was at 07:33 PM ----------
BTW, what's your country name?
Sent from my SM-G900H using Tapatalk
andrew21 said:
I tried flashing firmware for UAE region....still fail
any help?
Click to expand...
Click to collapse
If you can get Kies to connect, it should give you 3 codes, all starting with G900H. Mine where XXXU1... HOJV1... XXXU1... I then downloaded a firmware with the same initial codes, mostly the HOJV1 seemed to matter. Followed by country code in parenthesis. Might be worth checking if the country code matches your actual country? It seems matching CSC image version (HOJV1 in my case which was available in many countries) is enough to get a successful flash.
Masum56k said:
Guys, just last week I faced the same problem..
My mistake was in choosing correct Region. Then I found my country code (TML), simply move the cursor in Region list, and it'll display country name..
Check link here.
http://samsung-updates.com/device/?id=SM-G900H&details=Galaxy_S5__Exynos_Octa
It's Official.
Sent from my SM-G900H using Tapatalk
---------- Post added at 07:34 PM ---------- Previous post was at 07:33 PM ----------
BTW, what's your country name?
Sent from my SM-G900H using Tapatalk
Click to expand...
Click to collapse
My counttry name is UAE...i will try your suggestion and post results
My phone is g900h 16 gb and sn is: RF1F42NSGGX
Can you tell me which region is my phone?
3c said:
If you can get Kies to connect, it should give you 3 codes, all starting with G900H. Mine where XXXU1... HOJV1... XXXU1... I then downloaded a firmware with the same initial codes, mostly the HOJV1 seemed to matter. Followed by country code in parenthesis. Might be worth checking if the country code matches your actual country? It seems matching CSC image version (HOJV1 in my case which was available in many countries) is enough to get a successful flash.
Click to expand...
Click to collapse
My phone cant connect with kies just says connecting forever...
andrew21 said:
CAn you tell me where to get custom recovery and how to flash it?
Click to expand...
Click to collapse
it depends on what model of galaxy s5 you have..check on thread custom recovery about your model and flash it via odin..there are instruction inside on custom recovery thread
Airboner said:
it depends on what model of galaxy s5 you have..check on thread custom recovery about your model and flash it via odin..there are instruction inside on custom recovery thread
Click to expand...
Click to collapse
I have SM-G900H, can you tell me where to get custom recovery from?
Masum56k said:
Guys, just last week I faced the same problem..
My mistake was in choosing correct Region. Then I found my country code (TML), simply move the cursor in Region list, and it'll display country name..
Check link here.
http://samsung-updates.com/device/?id=SM-G900H&details=Galaxy_S5__Exynos_Octa
It's Official.
Sent from my SM-G900H using Tapatalk
---------- Post added at 07:34 PM ---------- Previous post was at 07:33 PM ----------
BTW, what's your country name?
I tried your method....still odin fail???
Click to expand...
Click to collapse
andrew21 said:
I have SM-G900H, can you tell me where to get custom recovery from?
Click to expand...
Click to collapse
as i told you on galaxy s5 thread there are section about custom recovery search it a little please
Got the same issue. flashing CWM recovery with odin made my device reboot. Thank you so luch airbonner!!! :good::good::good:
andrew21 said:
CAn you tell me where to get custom recovery and how to flash it?
Click to expand...
Click to collapse
here you are : http://forum.xda-developers.com/showthread.php?t=2726186
anybody can help me? i want to rool back to original KitKat that my note 4 came with so i can sell it and be sure will have the warranty
where can i find the original kitkat version to be installed with odin ? i post the Kernal version and all the rest here.. thanks for the help
Kernal Version:
3.10.0-3311829
[email protected]#1
Build number
KTU84P.N910FXXU1ANK4
this is the 910F Europe model (not germany)
please help me to find the kitkat i need to install..
and how should i exactly do it??
downgrade to kitkat official.
amir84 said:
anybody can help me? i want to rool back to original KitKat that my note 4 came with so i can sell it and be sure will have the warranty
where can i find the original kitkat version to be installed with odin ? i post the Kernal version and all the rest here.. thanks for the help
Kernal Version:
3.10.0-3311829
[email protected]#1
Build number
KTU84P.N910FXXU1ANK4
this is the 910F Europe model (not germany)
please help me to find the kitkat i need to install..
and how should i exactly do it??
Click to expand...
Click to collapse
first you need to subcribe to samfirmeware , there you can get any firmeware you desire.
just look for firmware en type you device number. and tou wil see the files to download and how with odin,:good::good:
roydi said:
first you need to subcribe to samfirmeware , there you can get any firmeware you desire.
just look for firmware en type you device number. and tou wil see the files to download and how with odin,:good::good:
Click to expand...
Click to collapse
but is it possibile to do it with odin?
and i can't know my CSC original one.. when i had kitkat installed
amir84 said:
but is it possibile to do it with odin?
and i can't know my CSC original one.. when i had kitkat installed
Click to expand...
Click to collapse
yes al happen with odin . and you need only the firmware from sammobile.com/firmwares/ . the one you need for you country.
no need for any csc, because its al inside the firmware.
roydi said:
yes al happen with odin . and you need only the firmware from sammobile.com/firmwares/ . the one you need for you country.
no need for any csc, because its al inside the firmware.
Click to expand...
Click to collapse
so the only question now is how do i know which one is my original one that i need?
amir84 said:
so the only question now is how do i know which one is my original one that i need?
Click to expand...
Click to collapse
when you type you version phone, like n910f or c orwhat ever.
you clik it then you see your country and firmware that belong to.
Where did you get
---------- Post added at 05:29 PM ---------- Previous post was at 05:26 PM ----------
You can install any rom from any European countries but make sure That the rom you choose it's for SM-N910F
---------- Post added at 05:30 PM ---------- Previous post was at 05:29 PM ----------
Best options are BTU AND GERMANY
1980aksoy said:
Where did you get
---------- Post added at 05:29 PM ---------- Previous post was at 05:26 PM ----------
You can install any rom from any European countries but make sure That the rom you choose it's for SM-N910F
---------- Post added at 05:30 PM ---------- Previous post was at 05:29 PM ----------
Best options are BTU AND GERMANY
Click to expand...
Click to collapse
if i leave Lollipop installed (910F germany version) and sell the phone will it still have Samsung Warranty then?
amir84 said:
if i leave Lollipop installed (910F germany version) and sell the phone will it still have Samsung Warranty then?
Click to expand...
Click to collapse
yes .
amir84 said:
if i leave Lollipop installed (910F germany version) and sell the phone will it still have Samsung Warranty then?
Click to expand...
Click to collapse
Yeah, of course it will.
srltzz342 said:
Yeah, of course it will.
Click to expand...
Click to collapse
that is for sure...?
cause i red somewhere that if i update to another 910F version with odin i lose the warranty....
Do we keep files and apps if we downgrade or will I get factory reset? I hate lollipop and want back
amir84 said:
that is for sure...?
cause i red somewhere that if i update to another 910F version with odin i lose the warranty....
Click to expand...
Click to collapse
I mean, the warranty is on the phone itself, not the operating system on the phone. it doesnt make sense to me that a warranty would expire because the phone upgraded itself.
Hi, i am looking for a stock firmware for my tab 4, and i can't seem to find the right one. Can anyone share a link for a stock firmware file for my tablet?
Here is my tab info:
Build number: T230NUUEUOANK2
Region code: XAR
Android version: 4.4.2
Thanks for any responses.
+1....Mine has been bricked for some time now
---------- Post added at 11:40 PM ---------- Previous post was at 11:38 PM ----------
Try Samfirmware.com
How about looking here.. http://forum.xda-developers.com/showthread.php?p=58428539
DUHAsianSKILLZ said:
How about looking here.. http://forum.xda-developers.com/showthread.php?p=58428539
Click to expand...
Click to collapse
Sadly my build number isn't listed here I've tried downloading my firmware from here http://forum.xda-developers.com/tab-4/general/link-original-firmware-images-tab-4-7-t2978495 but rapidgator fails to download, and uploaded needs a premium account to download a firmware of that size.
jxcorex28 said:
+1....Mine has been bricked for some time now
---------- Post added at 11:40 PM ---------- Previous post was at 11:38 PM ----------
Try Samfirmware.com
Click to expand...
Click to collapse
Have you tried using a USB jig and flashing your firmware with ODIN? look here: http://www.xda-developers.com/need-a-samsung-usb-jig-build-your-own/ USB jigs can be found for only a dollar, google it and find the prices if you don't want to make your own.
_Cristian_ said:
Sadly my build number isn't listed here I've tried downloading my firmware from here http://forum.xda-developers.com/tab-4/general/link-original-firmware-images-tab-4-7-t2978495 but rapidgator fails to download, and uploaded needs a premium account to download a firmware of that size.
Click to expand...
Click to collapse
Is there any reason you need NK2 in particular? My thread has NE2 and OC1 listed, I know at least OC1 is a newer build, so if anything, you'd be updating/upgrading your firmware. It's the same model number and region, so there wouldn't be any reason for it to malfunction...
thisisapoorusernamechoice said:
Is there any reason you need NK2 in particular? My thread has NE2 and OC1 listed, I know at least OC1 is a newer build, so if anything, you'd be updating/upgrading your firmware. It's the same model number and region, so there wouldn't be any reason for it to malfunction...
Click to expand...
Click to collapse
I checked with kies the other day and i saw OC1 was the new firmware, i'll check that one out. Thanks. :good:
I thought about JTAG'ing the device, but I dont have a soldering gun.....I called samsung, and they are going to repair it because of still being under warranty.
jxcorex28 said:
I thought about JTAG'ing the device, but I dont have a soldering gun.....I called samsung, and they are going to repair it because of still being under warranty.
Click to expand...
Click to collapse
Sounds good. :good:
Finally here. Currently only OTA update available, but should work on TMO variant.
http://mobilesyrup.com/2016/05/26/bell-samsung-galaxy-note-4-marshmallow-update-canada/
Really.. The canadians get the update before the us... i'm getting a lg that was the last straw....
HockeyNinja said:
Finally here. Currently only OTA update available, but should work on TMO variant.
http://mobilesyrup.com/2016/05/26/bell-samsung-galaxy-note-4-marshmallow-update-canada/
Click to expand...
Click to collapse
Can i flash this on n910t?
Avide said:
Can i flash this on n910t?
Click to expand...
Click to collapse
First off it's only on the note 4 from north america... 2 it's only over the air (OTA) so there is no firmware to download... that i know of..
S5Sickness said:
First off it's only on the note 4 from north america... 2 it's only over the air (OTA) so there is no firmware to download...
Click to expand...
Click to collapse
Weird, i was thinking that this is one of the Canadian versions avaliable for download http://www.sammobile.com/firmwares/download/72507/N910W8VLU1DPE2_N910W8OYA1DPE2_BMC/
Also i forgot N910T it's not from north america.
This is ridiculous! T-mobile updated all of their scheduled MM updates, except Note 4s and Tab S2! Whats wrong with them!!! I'm soo mad...
Avide said:
Weird, i was thinking that this is one of the Canadian versions avaliable for download http://www.sammobile.com/firmwares/download/72507/N910W8VLU1DPE2_N910W8OYA1DPE2_BMC/
Also i forgot N910T it's not from north america.
Click to expand...
Click to collapse
This might have just came out after i posted this... but if it will work with your phone as long as the model match then no reason why you can't upgrade....
if you want to download it, just get samfirm and download it using that with model number as sm-n910w8 and either use TLS (Telus) or RWC for Region.
Set the option to decrypt automatically. You can use odin to flash.
goofball2k said:
if you want to download it, just get samfirm and download it using that with model number as sm-n910w8 and either use TLS (Telus) or RWC for Region.
Set the option to decrypt automatically. You can use odin to flash.
Click to expand...
Click to collapse
So you are saying i can flash the sm-n910w8 firmware onto the t-mobile note 4?
S5Sickness said:
So you are saying i can flash the sm-n910w8 firmware onto the t-mobile note 4?
Click to expand...
Click to collapse
Fwiw, it decrypts/ extracts as a .zip file, so won't flash in Odin. I assume it's a zip due to it being a downloadable update directly to the phone. Flash in TWRP or CWM?
---------- Post added at 07:44 PM ---------- Previous post was at 07:40 PM ----------
Avide said:
Also i forgot N910T it's not from north america.
Click to expand...
Click to collapse
Well...it is indeed from North America, as the USA is in North America. However, it is not the "North American" version.
Will it work in a N910T? Beats me.
Anyone else having problems with ALL other ROMs not booting up after upgrading to N910W8VLU1DPE2?
NIKKOTUASON said:
Anyone else having problems with ALL other ROMs not booting up after upgrading to N910W8VLU1DPE2?
Click to expand...
Click to collapse
if you upgraded from 5.1.1 to 6.0 you have lost root more then likely.. you may need to wait for a new way to root 6.0..
S5Sickness said:
if you upgraded from 5.1.1 to 6.0 you have lost root more then likely.. you may need to wait for a new way to root 6.0..
Click to expand...
Click to collapse
No need to wait, the latest cf-auto-root from chainfire works fine on 6.0.
---------- Post added at 11:47 PM ---------- Previous post was at 11:41 PM ----------
Pinan said:
Fwiw, it decrypts/ extracts as a .zip file, so won't flash in Odin. I assume it's a zip due to it being a downloadable update directly to the phone. Flash in TWRP or CWM?
---------- Post added at 07:44 PM ---------- Previous post was at 07:40 PM ----------
Well...it is indeed from North America, as the USA is in North America. However, it is not the "North American" version.
Will it work in a N910T? Beats me.
Click to expand...
Click to collapse
Actually the DPE2 firmware is posted as a zip, but once you unzip your download (which is over 2 GB in size, btw!) you will have a .tar.md5 file that you flash with Odin in the usual way.
As for the question of whether you actually _can_ flash the DPE2 firmware for the N910W8 on the N910T, at least one developer, Ovrdrive, who tried it on his N910T said it wouldn't boot, and I haven't seen any posts here from anyone saying they got it to work on a N910T. So - any brave soul who tried DPE2 on his N910T and made it work should post about his success here.
gun26 said:
No need to wait, the latest cf-auto-root from chainfire works fine on 6.0.
---------- Post added at 11:47 PM ---------- Previous post was at 11:41 PM ----------
Actually the DPE2 firmware is posted as a zip, but once you unzip your download (which is over 2 GB in size, btw!) you will have a .tar.md5 file that you flash with Odin in the usual way.
As for the question of whether you actually _can_ flash the DPE2 firmware for the N910W8 on the N910T, at least one developer, Ovrdrive, who tried it on his N910T said it wouldn't boot, and I haven't seen any posts here from anyone saying they got it to work on a N910T. So - any brave soul who tried DPE2 on his N910T and made it work should post about his success here.
Click to expand...
Click to collapse
NO it will not work on the 910T. not through Odin anyways as the model number won't match. Sefrcoko is working on a flashable zip and deodexing but at the moment is having issues with deodexing so it may work through flashing in recovery with a MM kernel. We will have to wait and see
gun26 said:
Actually the DPE2 firmware is posted as a zip, but once you unzip your download (which is over 2 GB in size, btw!) you will have a .tar.md5 file that you flash with Odin in the usual way.
.
Click to expand...
Click to collapse
Not for me. I downloaded it using SamFirm (as mentioned earlier), and set to "Decrypt Automatically. It completed as a Zip file that would not unzip. Perhaps it was corrupt. ?
Pinan said:
Not for me. I downloaded it using SamFirm (as mentioned earlier), and set to "Decrypt Automatically. It completed as a Zip file that would not unzip. Perhaps it was corrupt. ?
Click to expand...
Click to collapse
I've never used Samfirm. I was talking specifically about the zip files posted at sammobile (link for the N910W8 version in my previous post), which are intended to be unzipped to a .tar.md5 and flashed with Odin.
NIKKOTUASON said:
Anyone else having problems with ALL other ROMs not booting up after upgrading to N910W8VLU1DPE2?
Click to expand...
Click to collapse
Same here! Upgraded to mm and can't boot to overrides s7 port or my v15 restore and when it does boot, its missing wifi????
Tried different mm kernels but it never gets past the android is upgrading screen
BTW, Im re rooted and supersu installed.
gun26 said:
No need to wait, the latest cf-auto-root from chainfire works fine on 6.0.
Click to expand...
Click to collapse
which one?
the one on their website for the W8 says 5.1.1...
dsac said:
which one?
the one on their website for the W8 says 5.1.1...
Click to expand...
Click to collapse
That one works. Same one I used for 5.1.1 is the one I used for 6.0.
kidhertz said:
Same here! Upgraded to mm and can't boot to overrides s7 port or my v15 restore and when it does boot, its missing wifi????
Tried different mm kernels but it never gets past the android is upgrading screen
BTW, Im re rooted and supersu installed.
Click to expand...
Click to collapse
I assume that since you upgraded to MM, and T-Mobile has yet to ship MM, you have a N910W8 and you installed DPE2. It's the bootloader that came with DPE2 that is the problem. All the custom ROMs, even the MM port ones, are intended for the most recent T-Mobile bootloader, which is DOK2 Lollipop 5.1.1, or the most recent Canadian equivalent, COK3 Lollipop 5.1.1. When and if T-Mobile finally, FINALLY ships their version of MM, the custom ROMs here will probably be based on that bootloader instead. T-Mo and Samsung should be ashamed about how long MM is taking. Verizon has it. EVERY Canadian carrier has it. Looks like T-Mo is shooting for the distinction of being the very last carrier anywhere to ship MM.
Anyway, until then you need to use Odin to downgrade to COK3 (or, at least the COK3 bootloader) before any currently available custom ROMs will boot.