[Q] Help Cant flash any Rom Recovery loop N9005 - Galaxy Note 3 Q&A, Help & Troubleshooting

hi every one
i have upgrade to 4.4.2 recently
few hours ago i did wipe data from recovery BUT the device has stopped wiping idk how its not responding i I took out the battery
next i have flashed a ZTO rom 4.4.2 after it gave me Pass in odin it goes to recovery and gives me a red Exclamation mark and rebooting
And so on looping recovery
i have tryed :
1- flash rom again
2- install cwm
3- flash different rom
and no soulotin any help ???

XQ55.amr said:
hi every one
i have upgrade to 4.4.2 recently
few hours ago i did wipe data from recovery BUT the device has stopped wiping idk how its not responding i I took out the battery
next i have flashed a ZTO rom 4.4.2 after it gave me Pass in odin it goes to recovery and gives me a red Exclamation mark and rebooting
And so on looping recovery
i have tryed :
1- flash rom again
2- install cwm
3- flash different rom
and no soulotin any help ???
Click to expand...
Click to collapse
Is this ZTO rom for N9005?

hey_joe said:
Is this ZTO rom for N9005?
Click to expand...
Click to collapse
the zto region rom
N9005VJUENB4 firmware version for Galaxy Note 3 (Snapdragon) (SM-N9005) from region ZTO!
Firmware Version Info
(PDA: N9005VJUENB4 CSC: N9005ZTOENB5 MODEM: N9005VJUENB1 CHANGELIST: 638180 BUILD DATE: 14.02.2014)

XQ55.amr said:
the zto region rom
N9005VJUENB4 firmware version for Galaxy Note 3 (Snapdragon) (SM-N9005) from region ZTO!
Firmware Version Info
(PDA: N9005VJUENB4 CSC: N9005ZTOENB5 MODEM: N9005VJUENB1 CHANGELIST: 638180 BUILD DATE: 14.02.2014)
Click to expand...
Click to collapse
Flash it again but this time use this pit file with it.

hey_joe said:
Flash it again but this time use this pit file with it.
Click to expand...
Click to collapse
can you give me the pit file ?

XQ55.amr said:
can you give me the pit file ?
Click to expand...
Click to collapse
I purposely deleted the pit file because it was meant for the Germany NB4 release. But if you want to try it, get it here.

hey_joe said:
I purposely deleted the pit file because it was meant for the Germany NB4 release. But if you want to try it, get it here.
Click to expand...
Click to collapse
is it safe to flash >?? i have brick my s3 with that file called PIT

XQ55.amr said:
is it safe to flash >?? i have brick my s3 with that file called PIT
Click to expand...
Click to collapse
That's the reason I edited out the link because I'm not sure if it will brick your phone as it's from a different region.
---------- Post added at 06:18 PM ---------- Previous post was at 06:14 PM ----------
hey_joe said:
That's the reason I edited out the link because I'm not sure if it will brick your phone as it's from a different region.
Click to expand...
Click to collapse
Is the ZTO NB4 the one meant for your phone/carrier or it was bought from overseas/different region?

hey_joe said:
That's the reason I edited out the link because I'm not sure if it will brick your phone as it's from a different region.
---------- Post added at 06:18 PM ---------- Previous post was at 06:14 PM ----------
Is the ZTO NB4 the one meant for your phone/carrier or it was bought from overseas/different region?
Click to expand...
Click to collapse
i live in KSA we still didnt get the kitkat

XQ55.amr said:
i live in KSA we still didnt get the kitkat
Click to expand...
Click to collapse
The pit might work, check this.

hey_joe said:
The pit might work, check this.
Click to expand...
Click to collapse
ٌٌٌReally iam scared
any Other Solution's ???

XQ55.amr said:
ٌٌٌReally iam scared
any Other Solution's ???
Click to expand...
Click to collapse
You can try flashing it again using a different version of odin ( check link I gave you ), can also try ticking repartition.
Sent from my SM-N900W8 using xda app-developers app

Related

No IMEI and no nv_data

Hello
I upgraded to Android 4.4 and rooted my device.
Now I cant connect to mobile network and cant see my IMEI.
There isnt any nv_data in EFS Folger -.-
Any solutions?
Product Code: XEF
PDA: N9005XXUDMK2
CSC: N9005OXXDMK3
MODEM: N9005XXUDMJ7
D4rk_nVidia said:
Hello
I upgraded to Android 4.4 and rooted my device.
Now I cant connect to mobile network and cant see my IMEI.
There isnt any nv_data in EFS Folger -.-
Any solutions?
Product Code: XEF
PDA: N9005XXUDMK2
CSC: N9005OXXDMK3
MODEM: N9005XXUDMJ7
Click to expand...
Click to collapse
The Only thing you can really do is Flash Stock ROM with Full Wipe, Or take it to Samsung for servicing
I cant flash the stock ROM because there isnt any Stock ROM with 4.4 for my phone -.-
Samsung/the repair service wants 250€ for the repair .
Any solutions ? :/
D4rk_nVidia said:
I cant flash the stock ROM because there isnt any Stock ROM with 4.4 for my phone -.-
Samsung/the repair service wants 250€ for the repair .
Any solutions ? :/
Click to expand...
Click to collapse
Try flashing this.
http://forum.xda-developers.com/showthread.php?p=47014662
D4rk_nVidia said:
Hello
I upgraded to Android 4.4 and rooted my device.
Now I cant connect to mobile network and cant see my IMEI.
There isnt any nv_data in EFS Folger -.-
Any solutions?
Product Code: XEF
PDA: N9005XXUDMK2
CSC: N9005OXXDMK3
MODEM: N9005XXUDMJ7
Click to expand...
Click to collapse
The Note 3 efs partition doesn't contain nv_data. All Note 3 are like that.
You say you upgraded to Kitkat, but the details you listed are of JB.
Did you flash a CM based ROM?
It dosent help
My phone wasnt booting so I flashed N9005XXUENA6 4.4.2 KitKat OXX .
Now my phone boots but still the same issue with IMEI.
I think I need an stock rom or? I need 4.4 for XEF (France/Europe)
Or is there any other way? can anyone repair things like that?
FeralFire said:
You say you upgraded to Kitkat, but the details you listed are of JB.
Did you flash a CM based ROM?
Click to expand...
Click to collapse
Nope im on N9005XXUENA6 now
D4rk_nVidia said:
It dosent help
My phone wasnt booting so I flashed N9005XXUENA6 4.4.2 KitKat OXX .
Now my phone boots but still the same issue with IMEI.
I think I need an stock rom or? I need 4.4 for XEF (France/Europe)
Or is there any other way? can anyone repair things like that?
Nope im on N9005XXUENA6 now
Click to expand...
Click to collapse
Did you try flashing that zip over the NA6 ROM?
That zip has helped out many people. And frankly, I don't think there are many ways of restoring a corrupt EFS partition.
FeralFire said:
Did you try flashing that zip over the NA6 ROM?
That zip has helped out many people. And frankly, I don't think there are many ways of restoring a corrupt EFS partition.
Click to expand...
Click to collapse
I flashed but it dosent changed anything :/
I hope XEF ROM will be realesed soon. Its my last hope
D4rk_nVidia said:
I flashed but it dosent changed anything :/
I hope XEF ROM will be realesed soon. Its my last hope
Click to expand...
Click to collapse
Wish you luck.
So there isnt any other chance?
Which files sould be in the efs folder?
Maybe there is one missing which I can add or something when anyone can say how it should look
D4rk_nVidia said:
So there isnt any other chance?
Which files sould be in the efs folder?
Maybe there is one missing which I can add or something when anyone can say how it should look
Click to expand...
Click to collapse
This is what the folder looks like.
FeralFire said:
This is what the folder looks like.
Click to expand...
Click to collapse
Thank you.
Looks same
What is in your IMEI Folder?
for me there is only a file called mps_code.dat
I opened it and there is only "XEF".
in .files there are 3 Folders and there are all empty.
sdrm>data_agent is empty
D4rk_nVidia said:
Thank you.
Looks same
What is in your IMEI Folder?
for me there is only a file called mps_code.dat
I opened it and there is only "XEF".
in .files there are 3 Folders and there are all empty.
sdrm>data_agent is empty
Click to expand...
Click to collapse
Same as yours.
Except mine says XEO. Poland CSC.
FeralFire said:
Same as yours.
Except mine says XEO. Poland CSC.
Click to expand...
Click to collapse
Than I dont understand why mine is not working -.-
it Looks like there is nothing missing.
D4rk_nVidia said:
Than I dont understand why mine is not working -.-
it Looks like there is nothing missing.
Click to expand...
Click to collapse
EFS partitions are weird things....
Try flashing some other ROM?
FeralFire said:
EFS partitions are weird things....
Try flashing some other ROM?
Click to expand...
Click to collapse
True. Everything is new for me(first Samsung device with Android)
I Flash tomorrow a few other ROM´s.
Thats enough for today.
Thank you for your help FeralFire!
D4rk_nVidia said:
True. Everything is new for me(first Samsung device with Android)
I Flash tomorrow a few other ROM´s.
Thats enough for today.
Thank you for your help FeralFire!
Click to expand...
Click to collapse
Good luck to you.
---------- Post added at 03:34 AM ---------- Previous post was at 02:55 AM ----------
http://forum.gsmhosting.com/vbb/f71...eleased-add-galaxy-note3-imei-repair-1746726/
I found this. It could be a potential solution, but unfortunately, it only works on 4.3.
Though the author says that he will update it soon. So keep an eye out, just incase he updates it before you find another fix.
FeralFire said:
Good luck to you.
---------- Post added at 03:34 AM ---------- Previous post was at 02:55 AM ----------
http://forum.gsmhosting.com/vbb/f71...eleased-add-galaxy-note3-imei-repair-1746726/
I found this. It could be a potential solution, but unfortunately, it only works on 4.3.
Though the author says that he will update it soon. So keep an eye out, just incase he updates it before you find another fix.
Click to expand...
Click to collapse
Thanks !
Yeah but I need the box or?
I think it´s not so easy or cheap to get it in germany.
If you lose IMEI the EFS fire script won't repair it, it'll make it worse. French region devices have had issues as have NEE and HK - Install CWM or TWRP (you lose warranty) then go to wipe and wipe out /system --
Put your phone in download mode, and flash a STOCK ROM NB4 (German DBT) will do and grab a PIT file from one of the threads around here (DBT OTA thread I think has it HSD-Pilot posted it). load up the PIT file and the ROM .md5 - tick re-partition and hit start.. it'll rebuild your EFS - If that doesn't work, you'll need to ADB via terminal and do some trickery to restore your IMEI from your box. There is a tutorial in the forum for it.
---------- Post added at 07:53 AM ---------- Previous post was at 07:46 AM ----------
PIT FILE -credit @HSD-Pilot
---------- Post added at 07:54 AM ---------- Previous post was at 07:53 AM ----------
NB4 German Stock ROM -credits @Le [email protected]
radicalisto said:
If you lose IMEI the EFS fire script won't repair it, it'll make it worse. French region devices have had issues as have NEE and HK - Install CWM or TWRP (you lose warranty) then go to wipe and wipe out /system --
Put your phone in download mode, and flash a STOCK ROM NB4 (German DBT) will do and grab a PIT file from one of the threads around here (DBT OTA thread I think has it HSD-Pilot posted it). load up the PIT file and the ROM .md5 - tick re-partition and hit start.. it'll rebuild your EFS - If that doesn't work, you'll need to ADB via terminal and do some trickery to restore your IMEI from your box. There is a tutorial in the forum for it.
---------- Post added at 07:53 AM ---------- Previous post was at 07:46 AM ----------
PIT FILE -credit @HSD-Pilot
---------- Post added at 07:54 AM ---------- Previous post was at 07:53 AM ----------
NB4 German Stock ROM -credits @Le [email protected]
Click to expand...
Click to collapse
Nice, more hope
Should I delete the efs folder before or check efs clear in odin?
Edit:
I flashed the ROM with the PIT file. Re-partition is ticked but *#06# says IMEI NULL/NULL
Where is the adb tutorial. I found a few but they say I need to dial *#7248# or something like that and choose ....... but there isnt somethin like that.
UART > Modem and PDA is only there and Modem isnt tickable
Can anyone help me ?
The XEF Kitkat ROM is out now.
What now?
IMEI is still NULL/NULL

[Q] Flashing a stock rom from differne region

Is it possible to flash official stock firmware for Note 3 from region other than the original region of the phone? For example I have Note 3, N9005 from middle east (which has 4.3), can I flash a stock rom from a region for which 4.4.2 is available? Will this brick the phone? Will the phone be locked for that specific region in case flashing is successful? Any other problems? Did anyone did this before?
i have the same concern as yours, i have a Note3 and i am from the middle east can i download a stock rom from Europe for example Germany ??
shahidhussain said:
Is it possible to flash official stock firmware for Note 3 from region other than the original region of the phone? For example I have Note 3, N9005 from middle east (which has 4.3), can I flash a stock rom from a region for which 4.4.2 is available? Will this brick the phone? Will the phone be locked for that specific region in case flashing is successful? Any other problems? Did anyone did this before?
Click to expand...
Click to collapse
no problem with me. i have note 3 n9005 from france 4.3 then i flash stock rom 4.4.2 poland and its work. if the phone be locked u can use }Regionlock away from Chainfire to remove it.
Same here, I had a Hong Kong Note 3 on 4.3, flashed Poland kitkat then later flashed Singapore Kitkat without any problems.
Sent from my SM-N9005 using xda app-developers app
shahidhussain said:
Is it possible to flash official stock firmware for Note 3 from region other than the original region of the phone? For example I have Note 3, N9005 from middle east (which has 4.3), can I flash a stock rom from a region for which 4.4.2 is available? Will this brick the phone? Will the phone be locked for that specific region in case flashing is successful? Any other problems? Did anyone did this before?
Click to expand...
Click to collapse
I am using SM-N 9005 from UAE, I flash poland firmware when it released, received ota update also in february, working fine no problem at all.
jdomadia said:
I am using SM-N 9005 from UAE, I flash poland firmware when it released, received ota update also in february, working fine no problem at all.
Click to expand...
Click to collapse
Thanks. Can you please explain the method? I searched and found this one http://www.droidviews.com/how-to-install-restore-stock-firmware-on-samsung-galaxy-note-3-all-models/
Is there anything else to worry about?
I am sorry read below link before proceed
http://forum.xda-developers.com/showthread.php?t=2608458
shahidhussain said:
Thanks. Can you please explain the method? I searched and found this one http://www.droidviews.com/how-to-install-restore-stock-firmware-on-samsung-galaxy-note-3-all-models/
Is there anything else to worry about?
Click to expand...
Click to collapse
Yeah method is fine but usb debugging is not required, if u r from UAE poland firmware is supporting LTE without issue.
---------- Post added at 03:49 PM ---------- Previous post was at 03:45 PM ----------
shahidhussain said:
Thanks. Can you please explain the method? I searched and found this one http://www.droidviews.com/how-to-install-restore-stock-firmware-on-samsung-galaxy-note-3-all-models/
Is there anything else to worry about?
Click to expand...
Click to collapse
If u want u can read this thread from beginning many ppl explain how to flash, that will be more helpfull, Good Luck
If u want u can read this thread from beginning many ppl explain how to flash, that will be more helpfull, Good Luck
Click to expand...
Click to collapse
No, I am not from UAE. I live in KSA.
shahidhussain said:
No, I am not from UAE. I live in KSA.
Click to expand...
Click to collapse
Wait wait dont flash now if u r from KSA I read somewere here in XDA there is a some network related problems, pls read before flash, I think KSA has different firmeare.
jdomadia said:
Wait wait dont flash now if u r from KSA I read somewere here in XDA there is a some network related problems, pls read before flash, I think KSA has different firmeare.
Click to expand...
Click to collapse
My Note 3 has following:
AP: N9005XXUDMJ7
CP: N9005XXUDMJ7
CSC: N9005OJVDMJ4
shahidhussain said:
My Note 3 has following:
AP: N9005XXUDMJ7
CP: N9005XXUDMJ7
CSC: N9005OJVDMJ4
Click to expand...
Click to collapse
Its same as UAE XSI so may not any problems, but I am sure only about XSI which I am using now.
jdomadia said:
Its same as UAE XSI so may not any problems, but I am sure only about XSI which I am using now.
Click to expand...
Click to collapse
I flashed the N9005XXUENB4_N9005OXXENB1_XEF rom. It went normal and works fine. Battery life improved. Thanks.
shahidhussain said:
I flashed the N9005XXUENB4_N9005OXXENB1_XEF rom. It went normal and works fine. Battery life improved. Thanks.
Click to expand...
Click to collapse
Great,Good to Know all fine.
Does the csc change too?
Will you be able to get OTA updates?
Note3m said:
Same here, I had a Hong Kong Note 3 on 4.3, flashed Poland kitkat then later flashed Singapore Kitkat without any problems.
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
Can you send me the links on how to flash other roms..i also have a samsung galaxy note 3 smn9005 hongkong 16gb

please help !

hey guys
my n9005 KSA version running on 4.3 tried to manually update to kitkat then (firmware encountered an issue )
i took it to a non official repair center and the situation now is
boot-loader version :N9005XXUENA7
baseband :N9005DTMENA2
pda :N9005XXUENA2
but i have no csc code and now my samsung keyboard and action memo not working
i want to flash ksa 4.4 rom released 10 days ago but i am afraid of soft bricking my phone again sorry am not pro can someone help please
thanks
I have same like that before. Csc is missing when I check with *#1234#
I just reflash the firmware and it is there.
But u can just flash csc shld be no problem.
If u want to upgrade to latest firmware just get it from samfirmware.com nd flash through odin pc.
Sent from somewhere under the sky, at the corner of this rounded earth.
i downloaded ksa 4.4 stock firmware but its just one file tar. with no csc?
and now am already on 4.4 leaked version i guess with no csc i posted my current 4.4 rom code on the last post so any help to convert to ksa 4.4 without bricking?
kareem300 said:
and now am already on 4.4 leaked version i guess with no csc i posted my current 4.4 rom code on the last post so any help to convert to ksa 4.4 without bricking?
Click to expand...
Click to collapse
Just flash it with odin. Yap there is only one file.
Sent from my SM-N9005 using XDA Premium 4 mobile app
kareem300 said:
i downloaded ksa 4.4 stock firmware but its just one file tar. with no csc?
Click to expand...
Click to collapse
you can just try to reflash the firmware again.
Note 3 is still confusing me in a way. Certain way is working for some ppl, but not to others.
you have to bear in mind, flashing stock official rom from odin, won't brick your phone.
If possible, once ROM is completed (flashing is done), try to go into recovery (stock recovery which come with the official firmware), and do a full wipe/factory reset and wipe cache.
This full wipe seems to be the best way to avoid any error/problem.
So can you post your download mode snapshot to verify both applied CSC and knox warranty
for my seek
I've been told that flashing another Region firmware or changing CSC Could Trigger Knox Warranty please verify That By screenshot mention your old ROM Build Number Thank you
Sent from my SM-N9005 using Tapatalk
msasm09 said:
So can you post your download mode snapshot to verify both applied CSC and knox warranty
for my seek
I've been told that flashing another Region firmware or changing CSC Could Trigger Knox Warranty please verify That By screenshot mention your old ROM Build Number Thank you
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
i have no csc code on *#1234# thats only ap:n9005xxuena7
cp:n9005xxuena2
with no csc but at kies or phone info apk theres no csc code but original csc is KSA
Ok So please Post Download Made Screenshot
Sent from my SM-N9005 using Tapatalk
---------- Post added at 06:02 PM ---------- Previous post was at 06:01 PM ----------
I think It well show Which csc applied
Sent from my SM-N9005 using Tapatalk

SM-G900H firmware upgrade encountered an issue

Hello, i have a galaxy s5 SM-G900H that was hanging on logo...i tried flashing with odin and flashing failed then stuck on firmware upgrade encountered an issue...pls help or can someone link me to a firmware with more than one file and pit file....? thanks.
http://forum.xda-developers.com/showthread.php?t=2793474
Sent from my SM-G900H using Tapatalk
drakester09 said:
http://forum.xda-developers.com/showthread.php?t=2793474
Sent from my SM-G900H using Tapatalk
Click to expand...
Click to collapse
Thanks for the link but how do i get correct firmware...the phone was stuck on logo when i received it...
I flashed with G900HXXU1ANCI_G900HOJV1ANCH now i can get into download mode but still odin flash fail...help?????
Same issue
andrew21 said:
I flashed with G900HXXU1ANCI_G900HOJV1ANCH now i can get into download mode but still odin flash fail...help?????
Click to expand...
Click to collapse
I have same problem while trying to flash Stock rom From Other country?
at the end of flashing the rom fail:crying:
I need pit file for g900h 16gb UAE region....someone please upload, thanks
andrew21 said:
I flashed with G900HXXU1ANCI_G900HOJV1ANCH now i can get into download mode but still odin flash fail...help?????
Click to expand...
Click to collapse
andrew21 said:
I need pit file for g900h 16gb UAE region....someone please upload, thanks
Click to expand...
Click to collapse
There's a firmware for United Arab Emirates on SamMobile, why not flash that one? Assuming with UEA you meant United Arab Emirates, but the actual region code (in Kies) is one listed on SamMobile for that country, right?
I have a G900H with THR code, meant for Iran, but there's no firmware available for that device, so I'm not sure if I can flash another country or will automatically end-up with a bricked device?
3c said:
There's a firmware for United Arab Emirates on SamMobile, why not flash that one? Assuming with UEA you meant United Arab Emirates, but the actual region code (in Kies) is one listed on SamMobile for that country, right?
I have a G900H with THR code, meant for Iran, but there's no firmware available for that device, so I'm not sure if I can flash another country or will automatically end-up with a bricked device?
Click to expand...
Click to collapse
I tried flashing firmware for UAE region....still fail
any help?
andrew21 said:
I tried flashing firmware for UAE region....still fail
any help?
Click to expand...
Click to collapse
for those who have the specific issue just try flash with odin custom recovery it works
Airboner said:
for those who have the specific issue just try flash with odin custom recovery it works
Click to expand...
Click to collapse
CAn you tell me where to get custom recovery and how to flash it?
Guys, just last week I faced the same problem..
My mistake was in choosing correct Region. Then I found my country code (TML), simply move the cursor in Region list, and it'll display country name..
Check link here.
http://samsung-updates.com/device/?id=SM-G900H&details=Galaxy_S5__Exynos_Octa
It's Official.
Sent from my SM-G900H using Tapatalk
---------- Post added at 07:34 PM ---------- Previous post was at 07:33 PM ----------
BTW, what's your country name?
Sent from my SM-G900H using Tapatalk
andrew21 said:
I tried flashing firmware for UAE region....still fail
any help?
Click to expand...
Click to collapse
If you can get Kies to connect, it should give you 3 codes, all starting with G900H. Mine where XXXU1... HOJV1... XXXU1... I then downloaded a firmware with the same initial codes, mostly the HOJV1 seemed to matter. Followed by country code in parenthesis. Might be worth checking if the country code matches your actual country? It seems matching CSC image version (HOJV1 in my case which was available in many countries) is enough to get a successful flash.
Masum56k said:
Guys, just last week I faced the same problem..
My mistake was in choosing correct Region. Then I found my country code (TML), simply move the cursor in Region list, and it'll display country name..
Check link here.
http://samsung-updates.com/device/?id=SM-G900H&details=Galaxy_S5__Exynos_Octa
It's Official.
Sent from my SM-G900H using Tapatalk
---------- Post added at 07:34 PM ---------- Previous post was at 07:33 PM ----------
BTW, what's your country name?
Sent from my SM-G900H using Tapatalk
Click to expand...
Click to collapse
My counttry name is UAE...i will try your suggestion and post results
My phone is g900h 16 gb and sn is: RF1F42NSGGX
Can you tell me which region is my phone?
3c said:
If you can get Kies to connect, it should give you 3 codes, all starting with G900H. Mine where XXXU1... HOJV1... XXXU1... I then downloaded a firmware with the same initial codes, mostly the HOJV1 seemed to matter. Followed by country code in parenthesis. Might be worth checking if the country code matches your actual country? It seems matching CSC image version (HOJV1 in my case which was available in many countries) is enough to get a successful flash.
Click to expand...
Click to collapse
My phone cant connect with kies just says connecting forever...
andrew21 said:
CAn you tell me where to get custom recovery and how to flash it?
Click to expand...
Click to collapse
it depends on what model of galaxy s5 you have..check on thread custom recovery about your model and flash it via odin..there are instruction inside on custom recovery thread
Airboner said:
it depends on what model of galaxy s5 you have..check on thread custom recovery about your model and flash it via odin..there are instruction inside on custom recovery thread
Click to expand...
Click to collapse
I have SM-G900H, can you tell me where to get custom recovery from?
Masum56k said:
Guys, just last week I faced the same problem..
My mistake was in choosing correct Region. Then I found my country code (TML), simply move the cursor in Region list, and it'll display country name..
Check link here.
http://samsung-updates.com/device/?id=SM-G900H&details=Galaxy_S5__Exynos_Octa
It's Official.
Sent from my SM-G900H using Tapatalk
---------- Post added at 07:34 PM ---------- Previous post was at 07:33 PM ----------
BTW, what's your country name?
I tried your method....still odin fail???
Click to expand...
Click to collapse
andrew21 said:
I have SM-G900H, can you tell me where to get custom recovery from?
Click to expand...
Click to collapse
as i told you on galaxy s5 thread there are section about custom recovery search it a little please
Got the same issue. flashing CWM recovery with odin made my device reboot. Thank you so luch airbonner!!! :good::good::good:
andrew21 said:
CAn you tell me where to get custom recovery and how to flash it?
Click to expand...
Click to collapse
here you are : http://forum.xda-developers.com/showthread.php?t=2726186

Impossible to get out of BOOTLOOP: soft-bricked

Hi community!
First time posting.
So, my SM-G900I (shipped from Taiwan to Aus) recently started bootlooping so i decided to reflash a stock rom. I initially flashed an XSU version of the G900I stock and then a BRI version of stock. This didnt remove the bootloop. I then installed TWRP and cleared all the necessary caches, formatted data and everything else. still in bootloop.
I installed CM13 in TWRP install menu and it still didnt boot. I've also tried pulling the battery for extended periods of time. I dabbled in terminal commands but it was all a bit above me!
is there anything else i can do or is the phone dead? it can still enter download mode and TWRP. is this a battery problem? in TWRP the battery says it's 80% charged so it seems to hold charge.
Thanks for your help.
Cheers.
Did you try flashing the stock rom and PIT file with ODIN?
EzStyles said:
Did you try flashing the stock rom and PIT file with ODIN?
Click to expand...
Click to collapse
I did. 16GB G900I pit file was flashed alongside BL, AP, CP, and CSC files (got directly from Kies).
I am able to install a custom recovery and access those menus but i can't get in to the stock recovery menu.
haydonny said:
I did. 16GB G900I pit file was flashed alongside BL, AP, CP, and CSC files (got directly from Kies).
I am able to install a custom recovery and access those menus but i can't get in to the stock recovery menu.
Click to expand...
Click to collapse
You need a repair firmware find here http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82 flashed whole firmware bootloder pda modem csc press thanks if i helped
Hi!
Thanks for the quick response but there are none there for G900I models. Just a question, how do these differ from manually putting in pit, AP, BL, CP and CSC seperately?
cheers.
waheem said:
You need a repair firmware find here ....URL HERE.. flashed whole firmware bootloder pda modem csc press thanks if i helped
Click to expand...
Click to collapse
Forgot to quote
You made a wipe of System, Data, Cache and Dalvik cache? If yes you tried Wipe Internal Storage too?
haydonny said:
Hi!
Thanks for the quick response but there are none there for G900I models. Just a question, how do these differ from manually putting in pit, AP, BL, CP and CSC seperately?
cheers.
Click to expand...
Click to collapse
AP = Android Platform
BL = Bootloader
CP = Modem (radio)
CSC = Region & Network operator
PIT = Partition table
Lunch Odin tick ap and select pda' ap' code acoding your downloaded firmware tick BL select bootloder
Tick cp and select modem
Tick csc select csc
Tick pit and select pit
Start
A bad pit can bricked your phone and bootloops
waheem said:
You need a repair firmware find here http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82 flashed whole firmware bootloder pda modem csc press thanks if i helped
Click to expand...
Click to collapse
IT IS FIXED! THANK THE LORD! NO! THANK YOU!
Im heading overseas in a few days so im glad this is sorted! downloading a FULL firmware worked. i was originally on lollipop but dropped back down to 4.4.2 and it worked a charm!
Good to help you bro
---------- Post added at 03:49 PM ---------- Previous post was at 03:45 PM ----------
haydonny said:
IT IS FIXED! THANK THE LORD! NO! THANK YOU!
Im heading overseas in a few days so im glad this is sorted! downloading a FULL firmware worked. i was originally on lollipop but dropped back down to 4.4.2 and it worked a charm!
Click to expand...
Click to collapse
You can update back to lollipop phone server
waheem said:
Good to help you bro
---------- Post added at 03:49 PM ---------- Previous post was at 03:45 PM ----------
You can update back to lollipop phone server
Click to expand...
Click to collapse
Just trying to update but the phone isnt saying it's connected to the computer post-flash. It isnt charging. Also updates thorugh the phone are saying 4.4.2 is the most up to date?
waheem said:
Good to help you bro
---------- Post added at 03:49 PM ---------- Previous post was at 03:45 PM ----------
You can update back to lollipop phone server
Click to expand...
Click to collapse
Just trying to update but the phone isnt saying it's connected to the computer post-flash. It isnt charging. Also updates thorugh the phone are saying 4.4.2 is the most up to date?
Download update to samfirmwar it is 1 package file home tar md5 put on PDA and flash make sure download correct firmware of your country region
best way : download samsung kies, go to download mode on your phone, connect it to pc, open samsung kies, go to tools->firmware update settings, this will update your phone to latest firmware fixing any software related problem. after that you can root and flash any custom rom.
Gratz
haydonny said:
IT IS FIXED! THANK THE LORD! NO! THANK YOU!
Im heading overseas in a few days so im glad this is sorted! downloading a FULL firmware worked. i was originally on lollipop but dropped back down to 4.4.2 and it worked a charm!
Click to expand...
Click to collapse
Hi man, Congratz. I'd like to know which version did you download? Because I also have Taiwan version but is not in the list, just India and Australia options.
Thanks for your help.
waheem said:
You need a repair firmware find here <URL here> flashed whole firmware bootloder pda modem csc press thanks if i helped
Click to expand...
Click to collapse
Hi, I'd like to know which version should I download? Because I have Taiwan version but is not in the list, just India and Australia options.
Thanks for your help.
waheem said:
You need a repair firmware find here http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82 flashed whole firmware bootloder pda modem csc press thanks if i helped
Click to expand...
Click to collapse
hello bro,can you help me......mine same problem Samsung s5 G900I stuck at bootloop,tried so many but still can't fix it....can you send me the link given above so I can try mine also
jarokku said:
hello bro,can you help me......mine same problem Samsung s5 G900I stuck at bootloop,tried so many but still can't fix it....can you send me the link given above so I can try mine also
Click to expand...
Click to collapse
pls someone help me

Categories

Resources