Hi community!
First time posting.
So, my SM-G900I (shipped from Taiwan to Aus) recently started bootlooping so i decided to reflash a stock rom. I initially flashed an XSU version of the G900I stock and then a BRI version of stock. This didnt remove the bootloop. I then installed TWRP and cleared all the necessary caches, formatted data and everything else. still in bootloop.
I installed CM13 in TWRP install menu and it still didnt boot. I've also tried pulling the battery for extended periods of time. I dabbled in terminal commands but it was all a bit above me!
is there anything else i can do or is the phone dead? it can still enter download mode and TWRP. is this a battery problem? in TWRP the battery says it's 80% charged so it seems to hold charge.
Thanks for your help.
Cheers.
Did you try flashing the stock rom and PIT file with ODIN?
EzStyles said:
Did you try flashing the stock rom and PIT file with ODIN?
Click to expand...
Click to collapse
I did. 16GB G900I pit file was flashed alongside BL, AP, CP, and CSC files (got directly from Kies).
I am able to install a custom recovery and access those menus but i can't get in to the stock recovery menu.
haydonny said:
I did. 16GB G900I pit file was flashed alongside BL, AP, CP, and CSC files (got directly from Kies).
I am able to install a custom recovery and access those menus but i can't get in to the stock recovery menu.
Click to expand...
Click to collapse
You need a repair firmware find here http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82 flashed whole firmware bootloder pda modem csc press thanks if i helped
Hi!
Thanks for the quick response but there are none there for G900I models. Just a question, how do these differ from manually putting in pit, AP, BL, CP and CSC seperately?
cheers.
waheem said:
You need a repair firmware find here ....URL HERE.. flashed whole firmware bootloder pda modem csc press thanks if i helped
Click to expand...
Click to collapse
Forgot to quote
You made a wipe of System, Data, Cache and Dalvik cache? If yes you tried Wipe Internal Storage too?
haydonny said:
Hi!
Thanks for the quick response but there are none there for G900I models. Just a question, how do these differ from manually putting in pit, AP, BL, CP and CSC seperately?
cheers.
Click to expand...
Click to collapse
AP = Android Platform
BL = Bootloader
CP = Modem (radio)
CSC = Region & Network operator
PIT = Partition table
Lunch Odin tick ap and select pda' ap' code acoding your downloaded firmware tick BL select bootloder
Tick cp and select modem
Tick csc select csc
Tick pit and select pit
Start
A bad pit can bricked your phone and bootloops
waheem said:
You need a repair firmware find here http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82 flashed whole firmware bootloder pda modem csc press thanks if i helped
Click to expand...
Click to collapse
IT IS FIXED! THANK THE LORD! NO! THANK YOU!
Im heading overseas in a few days so im glad this is sorted! downloading a FULL firmware worked. i was originally on lollipop but dropped back down to 4.4.2 and it worked a charm!
Good to help you bro
---------- Post added at 03:49 PM ---------- Previous post was at 03:45 PM ----------
haydonny said:
IT IS FIXED! THANK THE LORD! NO! THANK YOU!
Im heading overseas in a few days so im glad this is sorted! downloading a FULL firmware worked. i was originally on lollipop but dropped back down to 4.4.2 and it worked a charm!
Click to expand...
Click to collapse
You can update back to lollipop phone server
waheem said:
Good to help you bro
---------- Post added at 03:49 PM ---------- Previous post was at 03:45 PM ----------
You can update back to lollipop phone server
Click to expand...
Click to collapse
Just trying to update but the phone isnt saying it's connected to the computer post-flash. It isnt charging. Also updates thorugh the phone are saying 4.4.2 is the most up to date?
waheem said:
Good to help you bro
---------- Post added at 03:49 PM ---------- Previous post was at 03:45 PM ----------
You can update back to lollipop phone server
Click to expand...
Click to collapse
Just trying to update but the phone isnt saying it's connected to the computer post-flash. It isnt charging. Also updates thorugh the phone are saying 4.4.2 is the most up to date?
Download update to samfirmwar it is 1 package file home tar md5 put on PDA and flash make sure download correct firmware of your country region
best way : download samsung kies, go to download mode on your phone, connect it to pc, open samsung kies, go to tools->firmware update settings, this will update your phone to latest firmware fixing any software related problem. after that you can root and flash any custom rom.
Gratz
haydonny said:
IT IS FIXED! THANK THE LORD! NO! THANK YOU!
Im heading overseas in a few days so im glad this is sorted! downloading a FULL firmware worked. i was originally on lollipop but dropped back down to 4.4.2 and it worked a charm!
Click to expand...
Click to collapse
Hi man, Congratz. I'd like to know which version did you download? Because I also have Taiwan version but is not in the list, just India and Australia options.
Thanks for your help.
waheem said:
You need a repair firmware find here <URL here> flashed whole firmware bootloder pda modem csc press thanks if i helped
Click to expand...
Click to collapse
Hi, I'd like to know which version should I download? Because I have Taiwan version but is not in the list, just India and Australia options.
Thanks for your help.
waheem said:
You need a repair firmware find here http://www.tsar3000.com/Joomla/inde...ader-csc-pit-files&catid=55:samsung&Itemid=82 flashed whole firmware bootloder pda modem csc press thanks if i helped
Click to expand...
Click to collapse
hello bro,can you help me......mine same problem Samsung s5 G900I stuck at bootloop,tried so many but still can't fix it....can you send me the link given above so I can try mine also
jarokku said:
hello bro,can you help me......mine same problem Samsung s5 G900I stuck at bootloop,tried so many but still can't fix it....can you send me the link given above so I can try mine also
Click to expand...
Click to collapse
pls someone help me
Related
Hello
I upgraded to Android 4.4 and rooted my device.
Now I cant connect to mobile network and cant see my IMEI.
There isnt any nv_data in EFS Folger -.-
Any solutions?
Product Code: XEF
PDA: N9005XXUDMK2
CSC: N9005OXXDMK3
MODEM: N9005XXUDMJ7
D4rk_nVidia said:
Hello
I upgraded to Android 4.4 and rooted my device.
Now I cant connect to mobile network and cant see my IMEI.
There isnt any nv_data in EFS Folger -.-
Any solutions?
Product Code: XEF
PDA: N9005XXUDMK2
CSC: N9005OXXDMK3
MODEM: N9005XXUDMJ7
Click to expand...
Click to collapse
The Only thing you can really do is Flash Stock ROM with Full Wipe, Or take it to Samsung for servicing
I cant flash the stock ROM because there isnt any Stock ROM with 4.4 for my phone -.-
Samsung/the repair service wants 250€ for the repair .
Any solutions ? :/
D4rk_nVidia said:
I cant flash the stock ROM because there isnt any Stock ROM with 4.4 for my phone -.-
Samsung/the repair service wants 250€ for the repair .
Any solutions ? :/
Click to expand...
Click to collapse
Try flashing this.
http://forum.xda-developers.com/showthread.php?p=47014662
D4rk_nVidia said:
Hello
I upgraded to Android 4.4 and rooted my device.
Now I cant connect to mobile network and cant see my IMEI.
There isnt any nv_data in EFS Folger -.-
Any solutions?
Product Code: XEF
PDA: N9005XXUDMK2
CSC: N9005OXXDMK3
MODEM: N9005XXUDMJ7
Click to expand...
Click to collapse
The Note 3 efs partition doesn't contain nv_data. All Note 3 are like that.
You say you upgraded to Kitkat, but the details you listed are of JB.
Did you flash a CM based ROM?
It dosent help
My phone wasnt booting so I flashed N9005XXUENA6 4.4.2 KitKat OXX .
Now my phone boots but still the same issue with IMEI.
I think I need an stock rom or? I need 4.4 for XEF (France/Europe)
Or is there any other way? can anyone repair things like that?
FeralFire said:
You say you upgraded to Kitkat, but the details you listed are of JB.
Did you flash a CM based ROM?
Click to expand...
Click to collapse
Nope im on N9005XXUENA6 now
D4rk_nVidia said:
It dosent help
My phone wasnt booting so I flashed N9005XXUENA6 4.4.2 KitKat OXX .
Now my phone boots but still the same issue with IMEI.
I think I need an stock rom or? I need 4.4 for XEF (France/Europe)
Or is there any other way? can anyone repair things like that?
Nope im on N9005XXUENA6 now
Click to expand...
Click to collapse
Did you try flashing that zip over the NA6 ROM?
That zip has helped out many people. And frankly, I don't think there are many ways of restoring a corrupt EFS partition.
FeralFire said:
Did you try flashing that zip over the NA6 ROM?
That zip has helped out many people. And frankly, I don't think there are many ways of restoring a corrupt EFS partition.
Click to expand...
Click to collapse
I flashed but it dosent changed anything :/
I hope XEF ROM will be realesed soon. Its my last hope
D4rk_nVidia said:
I flashed but it dosent changed anything :/
I hope XEF ROM will be realesed soon. Its my last hope
Click to expand...
Click to collapse
Wish you luck.
So there isnt any other chance?
Which files sould be in the efs folder?
Maybe there is one missing which I can add or something when anyone can say how it should look
D4rk_nVidia said:
So there isnt any other chance?
Which files sould be in the efs folder?
Maybe there is one missing which I can add or something when anyone can say how it should look
Click to expand...
Click to collapse
This is what the folder looks like.
FeralFire said:
This is what the folder looks like.
Click to expand...
Click to collapse
Thank you.
Looks same
What is in your IMEI Folder?
for me there is only a file called mps_code.dat
I opened it and there is only "XEF".
in .files there are 3 Folders and there are all empty.
sdrm>data_agent is empty
D4rk_nVidia said:
Thank you.
Looks same
What is in your IMEI Folder?
for me there is only a file called mps_code.dat
I opened it and there is only "XEF".
in .files there are 3 Folders and there are all empty.
sdrm>data_agent is empty
Click to expand...
Click to collapse
Same as yours.
Except mine says XEO. Poland CSC.
FeralFire said:
Same as yours.
Except mine says XEO. Poland CSC.
Click to expand...
Click to collapse
Than I dont understand why mine is not working -.-
it Looks like there is nothing missing.
D4rk_nVidia said:
Than I dont understand why mine is not working -.-
it Looks like there is nothing missing.
Click to expand...
Click to collapse
EFS partitions are weird things....
Try flashing some other ROM?
FeralFire said:
EFS partitions are weird things....
Try flashing some other ROM?
Click to expand...
Click to collapse
True. Everything is new for me(first Samsung device with Android)
I Flash tomorrow a few other ROM´s.
Thats enough for today.
Thank you for your help FeralFire!
D4rk_nVidia said:
True. Everything is new for me(first Samsung device with Android)
I Flash tomorrow a few other ROM´s.
Thats enough for today.
Thank you for your help FeralFire!
Click to expand...
Click to collapse
Good luck to you.
---------- Post added at 03:34 AM ---------- Previous post was at 02:55 AM ----------
http://forum.gsmhosting.com/vbb/f71...eleased-add-galaxy-note3-imei-repair-1746726/
I found this. It could be a potential solution, but unfortunately, it only works on 4.3.
Though the author says that he will update it soon. So keep an eye out, just incase he updates it before you find another fix.
FeralFire said:
Good luck to you.
---------- Post added at 03:34 AM ---------- Previous post was at 02:55 AM ----------
http://forum.gsmhosting.com/vbb/f71...eleased-add-galaxy-note3-imei-repair-1746726/
I found this. It could be a potential solution, but unfortunately, it only works on 4.3.
Though the author says that he will update it soon. So keep an eye out, just incase he updates it before you find another fix.
Click to expand...
Click to collapse
Thanks !
Yeah but I need the box or?
I think it´s not so easy or cheap to get it in germany.
If you lose IMEI the EFS fire script won't repair it, it'll make it worse. French region devices have had issues as have NEE and HK - Install CWM or TWRP (you lose warranty) then go to wipe and wipe out /system --
Put your phone in download mode, and flash a STOCK ROM NB4 (German DBT) will do and grab a PIT file from one of the threads around here (DBT OTA thread I think has it HSD-Pilot posted it). load up the PIT file and the ROM .md5 - tick re-partition and hit start.. it'll rebuild your EFS - If that doesn't work, you'll need to ADB via terminal and do some trickery to restore your IMEI from your box. There is a tutorial in the forum for it.
---------- Post added at 07:53 AM ---------- Previous post was at 07:46 AM ----------
PIT FILE -credit @HSD-Pilot
---------- Post added at 07:54 AM ---------- Previous post was at 07:53 AM ----------
NB4 German Stock ROM -credits @Le [email protected]
radicalisto said:
If you lose IMEI the EFS fire script won't repair it, it'll make it worse. French region devices have had issues as have NEE and HK - Install CWM or TWRP (you lose warranty) then go to wipe and wipe out /system --
Put your phone in download mode, and flash a STOCK ROM NB4 (German DBT) will do and grab a PIT file from one of the threads around here (DBT OTA thread I think has it HSD-Pilot posted it). load up the PIT file and the ROM .md5 - tick re-partition and hit start.. it'll rebuild your EFS - If that doesn't work, you'll need to ADB via terminal and do some trickery to restore your IMEI from your box. There is a tutorial in the forum for it.
---------- Post added at 07:53 AM ---------- Previous post was at 07:46 AM ----------
PIT FILE -credit @HSD-Pilot
---------- Post added at 07:54 AM ---------- Previous post was at 07:53 AM ----------
NB4 German Stock ROM -credits @Le [email protected]
Click to expand...
Click to collapse
Nice, more hope
Should I delete the efs folder before or check efs clear in odin?
Edit:
I flashed the ROM with the PIT file. Re-partition is ticked but *#06# says IMEI NULL/NULL
Where is the adb tutorial. I found a few but they say I need to dial *#7248# or something like that and choose ....... but there isnt somethin like that.
UART > Modem and PDA is only there and Modem isnt tickable
Can anyone help me ?
The XEF Kitkat ROM is out now.
What now?
IMEI is still NULL/NULL
I have an italian note 3 with "KOT49H.N9005XXUENA6" firmware and "NA2" baseband.
Can anyone please tell me what is my region, if i am on the latest firmware version, also the update sequence (NA2>NA6>NB3>NB4) please?
And, is there any reason to update from my fw version to the latest available?
DiRT_360 said:
I have an italian note 3 with "KOT49H.N9005XXUENA6" firmware and "NA2" baseband.
Can anyone please tell me what is my region, if i am on the latest firmware version, also the update sequence (NA2>NA6>NB3>NB4) please?
And, is there any reason to update from my fw version to the latest available?
Click to expand...
Click to collapse
Use this, just read the CSC (do not change it if you do not know EXACTLY what you are doing):
https://play.google.com/store/apps/details?id=com.manniakk.cscselector
xclub_101 said:
Use this, just read the CSC (do not change it if you do not know EXACTLY what you are doing):
https://play.google.com/store/apps/details?id=com.manniakk.cscselector
Click to expand...
Click to collapse
hi, pls i want to upgrade to the latest german kiktkat firmware, am currently on MJ4 south African vodafone, with a different csc from the german, pls how do i flash the german firmware on my phone?
topdee said:
hi, pls can i want to upgrade to the latest german kiktkat firmware, am currently on MJ4 south African vodafone, with a different csc from the german, pls how do i flash the german firmware on my phone?
Click to expand...
Click to collapse
Get the Stock ROM you want to flash, and use Odin. - Go have a read there is many guides around to help.
radicalisto said:
Get the Stock ROM you want to flash, and use Odin. - Go have a read there is many guides around to help.
Click to expand...
Click to collapse
pls can you help with a link to the thread that explains well, because i have read many people having issues due to errors when flashing to kitkat
topdee said:
pls can you help with a link to the thread that explains well, because i have read many people having issues due to errors when flashing to kitkat
Click to expand...
Click to collapse
Get Odin 1.85 -
Download The firmware, there's plenty of Kitkat links on this forum in General section, unrar it to get the .md5 file, put your phone in download mode - Power button, Volume down and home button - open Odin on your PC - plug in your phone, load the .md5 file into the PDA/AP slot of Odin and press start.
can anyone please answer my questions?
radicalisto said:
Get Odin 1.85 -
Download The firmware, there's plenty of Kitkat links on this forum in General section, unrar it to get the .md5 file, put your phone in download mode - Power button, Volume down and home button - open Odin on your PC - plug in your phone, load the .md5 file into the PDA/AP slot of Odin and press start.
Click to expand...
Click to collapse
thanks a lot
DiRT_360 said:
I have an italian note 3 with "KOT49H.N9005XXUENA6" firmware and "NA2" baseband.
Can anyone please tell me what is my region, if i am on the latest firmware version, also the update sequence (NA2>NA6>NB3>NB4) please?
And, is there any reason to update from my fw version to the latest available?
Click to expand...
Click to collapse
To know your region download app from google play “phone info", sequence looks fine.
radicalisto said:
Get Odin 1.85 -
Download The firmware, there's plenty of Kitkat links on this forum in General section, unrar it to get the .md5 file, put your phone in download mode - Power button, Volume down and home button - open Odin on your PC - plug in your phone, load the .md5 file into the PDA/AP slot of Odin and press start.
Click to expand...
Click to collapse
finally flashed the german B4 successfully, but i lost root access in the process, pls is there anyway i can regain my root access?
---------- Post added at 10:17 PM ---------- Previous post was at 09:58 PM ----------
radicalisto said:
Get Odin 1.85 -
Download The firmware, there's plenty of Kitkat links on this forum in General section, unrar it to get the .md5 file, put your phone in download mode - Power button, Volume down and home button - open Odin on your PC - plug in your phone, load the .md5 file into the PDA/AP slot of Odin and press start.
Click to expand...
Click to collapse
finally flashed the german B4 successfully, but i lost root access in the process, pls is there anyway i can regain my root access?
topdee said:
finally flashed the german B4 successfully, but i lost root access in the process, pls is there anyway i can regain my root access?
---------- Post added at 10:17 PM ---------- Previous post was at 09:58 PM ----------
finally flashed the german B4 successfully, but i lost root access in the process, pls is there anyway i can regain my root access?
Click to expand...
Click to collapse
Re-root the exact same way you did the first time - remember to use Kitkat compatible CF-Autoroot though.
radicalisto said:
Re-root the exact same way you did the first time - remember to use Kitkat compatible CF-Autoroot though.
Click to expand...
Click to collapse
sorry, but will knox be tripped?
topdee said:
sorry, but will knox be tripped?
Click to expand...
Click to collapse
Yes Knox will be 0x1
hi every one
i have upgrade to 4.4.2 recently
few hours ago i did wipe data from recovery BUT the device has stopped wiping idk how its not responding i I took out the battery
next i have flashed a ZTO rom 4.4.2 after it gave me Pass in odin it goes to recovery and gives me a red Exclamation mark and rebooting
And so on looping recovery
i have tryed :
1- flash rom again
2- install cwm
3- flash different rom
and no soulotin any help ???
XQ55.amr said:
hi every one
i have upgrade to 4.4.2 recently
few hours ago i did wipe data from recovery BUT the device has stopped wiping idk how its not responding i I took out the battery
next i have flashed a ZTO rom 4.4.2 after it gave me Pass in odin it goes to recovery and gives me a red Exclamation mark and rebooting
And so on looping recovery
i have tryed :
1- flash rom again
2- install cwm
3- flash different rom
and no soulotin any help ???
Click to expand...
Click to collapse
Is this ZTO rom for N9005?
hey_joe said:
Is this ZTO rom for N9005?
Click to expand...
Click to collapse
the zto region rom
N9005VJUENB4 firmware version for Galaxy Note 3 (Snapdragon) (SM-N9005) from region ZTO!
Firmware Version Info
(PDA: N9005VJUENB4 CSC: N9005ZTOENB5 MODEM: N9005VJUENB1 CHANGELIST: 638180 BUILD DATE: 14.02.2014)
XQ55.amr said:
the zto region rom
N9005VJUENB4 firmware version for Galaxy Note 3 (Snapdragon) (SM-N9005) from region ZTO!
Firmware Version Info
(PDA: N9005VJUENB4 CSC: N9005ZTOENB5 MODEM: N9005VJUENB1 CHANGELIST: 638180 BUILD DATE: 14.02.2014)
Click to expand...
Click to collapse
Flash it again but this time use this pit file with it.
hey_joe said:
Flash it again but this time use this pit file with it.
Click to expand...
Click to collapse
can you give me the pit file ?
XQ55.amr said:
can you give me the pit file ?
Click to expand...
Click to collapse
I purposely deleted the pit file because it was meant for the Germany NB4 release. But if you want to try it, get it here.
hey_joe said:
I purposely deleted the pit file because it was meant for the Germany NB4 release. But if you want to try it, get it here.
Click to expand...
Click to collapse
is it safe to flash >?? i have brick my s3 with that file called PIT
XQ55.amr said:
is it safe to flash >?? i have brick my s3 with that file called PIT
Click to expand...
Click to collapse
That's the reason I edited out the link because I'm not sure if it will brick your phone as it's from a different region.
---------- Post added at 06:18 PM ---------- Previous post was at 06:14 PM ----------
hey_joe said:
That's the reason I edited out the link because I'm not sure if it will brick your phone as it's from a different region.
Click to expand...
Click to collapse
Is the ZTO NB4 the one meant for your phone/carrier or it was bought from overseas/different region?
hey_joe said:
That's the reason I edited out the link because I'm not sure if it will brick your phone as it's from a different region.
---------- Post added at 06:18 PM ---------- Previous post was at 06:14 PM ----------
Is the ZTO NB4 the one meant for your phone/carrier or it was bought from overseas/different region?
Click to expand...
Click to collapse
i live in KSA we still didnt get the kitkat
XQ55.amr said:
i live in KSA we still didnt get the kitkat
Click to expand...
Click to collapse
The pit might work, check this.
hey_joe said:
The pit might work, check this.
Click to expand...
Click to collapse
ٌٌٌReally iam scared
any Other Solution's ???
XQ55.amr said:
ٌٌٌReally iam scared
any Other Solution's ???
Click to expand...
Click to collapse
You can try flashing it again using a different version of odin ( check link I gave you ), can also try ticking repartition.
Sent from my SM-N900W8 using xda app-developers app
Hi to everyone!!!
I saw that many of you are having issues about the installation of the Vodafone-branded OS. If you want to install it very easily and fast, just follow this guide! You can follow this guide to install any branded OS to your G920F ONLY
WARNING: This procedure will delete all of data, however it wont trip KNOX
1. Download the Vodafone branded OS (here mirror not mine)
2. Download this pit file if your phone is the G920F ONLY
3. Open Odin and put the pit that we downloaded in the pit section and the firmware in the AP selection.
4. Start flashing
5. Voila. It is recommended to wipe the data and cache after flashing the OS to ensure the best performance out of it.
That's it. This pit file is made from @yakapa40 and make sure you press the "Thanks" button to him too.
Don't forget to press the "Thanks" button to me to for letting you know about this trick. I have tested and it works like charm!!!
No extra help will be given from me
Thanks for this PIT file, and if we want to go back to the original pit file do you know where we can find it ?
My version goes like this
1. Unpack G920FXXU3DPB8+Service+firmware.zip (Link)
2. Put the files where they say they should go (AP = AP / BL = BL ect)
3. Press Start
4. Done
This wipes you're storage so backup beforehand!
EDIT: Not sure if this trips KNOX, it shouldn't as its official firmware, but I cannot tell you as I already had KNOX tripped from the beta
Kagath said:
Thanks for this PIT file, and if we want to go back to the original pit file do you know where we can find it ?
Click to expand...
Click to collapse
From the same guy that I got the modified pit, you can get the original pit too
roughavoc said:
My version goes like this
1. Unpack G920FXXU3DPB8+Service+firmware.zip (Link)
2. Put the files where they say they should go (AP = AP / BL = BL ect)
3. Press Start
4. Done
This wipes you're storage so backup beforehand!
EDIT: Not sure if this trips KNOX, it shouldn't as its official firmware, but I cannot tell you as I already had KNOX tripped from the beta
Click to expand...
Click to collapse
You're right, this wipes all of your data.
But it wont void the KNOX counter
Kagath said:
Thanks for this PIT file, and if we want to go back to the original pit file do you know where we can find it ?
Click to expand...
Click to collapse
hello
for other SM-SM920 pit files you can take a look here:
http://forum.xda-developers.com/galaxy-s6/general/g920f-pit-file-banded-firmwares-t3118459
http://www.sammobile.com/forum/showthread.php?t=30173
regards
anyone tests this way??
how can i wipe data on my s6?
---------- Post added at 10:06 PM ---------- Previous post was at 09:57 PM ----------
mostafa-km said:
anyone tests this way??
Click to expand...
Click to collapse
All working!
Does the method in OP wipe storage? I'm on 3UK (H3G) will it trip Knox?
Sent from my SM-G920F using XDA Premium 4 mobile app
match_stick said:
Does the method in OP wipe storage? I'm on 3UK (H3G) will it trip Knox?
Sent from my SM-G920F using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No it won't trip knox. However it will delete all of your data
Does it have the Vodafone logo on boot?
Sent from my SM-G920F using XDA Premium 4 mobile app
I flashed like this:
Unpacked the firmware, removed hidden.img repacked using unified android toolkit
and flashed
RESULT=
I didn't lost my data
---------- Post added at 23:55 ---------- Previous post was at 23:51 ----------
match_stick said:
Does it have the Vodafone logo on boot?
Sent from my SM-G920F using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No
t-shock said:
From the same guy that I got the modified pit, you can get the original pit too
Click to expand...
Click to collapse
CAN YOU SHOW THE LINK FOR ORIGINAL PIT?
I FLASHED SCS: VOD + PIT AND NOW I HAVE CSC "SIM" (Slovenia)
HOW IT POSSIBLE?
thanks
strazi said:
CAN YOU SHOW THE LINK FOR ORIGINAL PIT?
I FLASHED SCS: VOD + PIT AND NOW I HAVE CSC "SIM" (Slovenia)
HOW IT POSSIBLE?
thanks
Click to expand...
Click to collapse
It is not harmful to the SIM(Slovenia). It is operating normally. The only restart 10 minutes.
Work normally. I updated by the method as described above. Data is not deleted if you do not want. Root disappears.
Guys, how about Voice Quality?
We have new modem...
Guys one question i used this pit to flash from BTU to ORO firmware , then i did factory reset and flashed Xef without this pit and again did factory reset so i got csc from xef active...After doing ota 6.0.1 i again did factory reset so now everything is clean i dont have root or knox 0x1...My question is do i have to flash some kind of original pit from 6.0.1 xef or i am good to go like this ?? Thx
Sent from my SM-G920F using Tapatalk
I downloaded the PIT And FW and followed the OP's instructions, worked perfectly. My question is, With tha new security update a while ago, where you can't downgrade your Android OS version. Now that I am on the 6.0.1 from the OPs post, am I able to revert back to my original PIT and Android 5.1.1?
If so, how do I know what PIT is my original one, and to reflash it do I need to follow the OPs instructions, only changing the PIT used and FW used? Any help would be greatly appreciated.
Forgot to say, I am on the Meteor Network, in Ireland.
Thank you! Running 6.0.1...Couldn't wait any longer! I'm on 3UK
Sent from my SM-G920F using XDA Premium 4 mobile app
LordVader1991 said:
I downloaded the PIT And FW and followed the OP's instructions, worked perfectly. My question is, With tha new security update a while ago, where you can't downgrade your Android OS version. Now that I am on the 6.0.1 from the OPs post, am I able to revert back to my original PIT and Android 5.1.1?
If so, how do I know what PIT is my original one, and to reflash it do I need to follow the OPs instructions, only changing the PIT used and FW used? Any help would be greatly appreciated.
Forgot to say, I am on the Meteor Network, in Ireland.
Click to expand...
Click to collapse
Hello everyone, sorry once again to bother you all, but does anyone have any help on this matter?
Frequent reboot after installing 6.0.1 to Samsung S6
After updating to Marshmallow, my S6 is rebooting very frequently. Please help.
t-shock said:
From the same guy that I got the modified pit, you can get the original pit too
You're right, this wipes all of your data.
But it wont void the KNOX counter
Click to expand...
Click to collapse
Hi,
Just to clarify can I use this method to flash Vodafone firmware on to my O2 branded and network unlocked G920F?
I have a EGY CSC.i need to change my CSC .because EGY has not received any updates since march.so how can i do it ?can i do it without breaking OTA?any help please
Just flash a different firmware via ODIN, no need to change CSC
CuBz90 said:
Just flash a different firmware via ODIN, no need to change CSC
Click to expand...
Click to collapse
If i flash BTU one will it break OTA?my product code ends with EGY(samsung phone info product code under CSC tab) is it okay?
dinuka_haxxor said:
If i flash BTU one will it break OTA?my product code ends with EGY(samsung phone info product code under CSC tab) is it okay?
Click to expand...
Click to collapse
Same question I have
---------- Post added at 04:17 PM ---------- Previous post was at 04:16 PM ----------
CuBz90 said:
Just flash a different firmware via ODIN, no need to change CSC
Click to expand...
Click to collapse
So by flashing UK BTW Firmware It will automatically change my region to the UK and Ill be receiving UK OTA updates in the future?
Hgneto said:
So by flashing UK BTW Firmware It will automatically change my region to the UK and Ill be receiving UK OTA updates in the future?
Click to expand...
Click to collapse
Correct. As long as you use the CSC file and not the HOME_CSC file.
CuBz90 said:
Correct. As long as you use the CSC file and not the HOME_CSC file.
Click to expand...
Click to collapse
Thank you for your help
I want to flash the latest firmware for the S7 Edge - https://www.sammobile.com/firmwares/download/122404/G935FXXU1DQB3_G935FOXA1DQB1_BTU/
Anything I must pay attention in Odin or just flash it the normal way?
Also, in the instructions they say to use odin v3.11.1, is it ok if I use the latest odin which is v3.12.3, or it's better if I use the version they used to avoid any surprise problems?
Hgneto said:
Thank you for your help
I want to flash the latest firmware for the S7 Edge - https://www.sammobile.com/firmwares/download/122404/G935FXXU1DQB3_G935FOXA1DQB1_BTU/
Anything I must pay attention in Odin or just flash it the normal way?
Also, in the instructions they say to use odin v3.11.1, is it ok if I use the latest odin which is v3.12.3, or it's better if I use the version they used to avoid any surprise problems?
Click to expand...
Click to collapse
Just flash all 4 files, ignoring HOME_CSC.
Any Odin version should be fine.
CuBz90 said:
Just flash all 4 files, ignoring HOME_CSC.
Any Odin version should be fine.
Click to expand...
Click to collapse
Thanks! And besides my phone isn't originally from the UK I'll start receiving OTA updates from the UK? Or will the OTA's be received from the original country where the phone was bought?
Hgneto said:
Thanks! And besides my phone isn't originally from the UK I'll start receiving OTA updates from the UK? Or will the OTA's be received from the original country where the phone was bought?
Click to expand...
Click to collapse
You'll receive OTA updates for BTU
problem with connecting gear 3
Hello
installed this rom on my s7 flat 930w8 and everything works great but i can not get my gear 3 to connect keep getting an error message
error message: "check if your phone is compatible and if the samsung gear app needs to be updated then try again
somtimes i will get a download failed message first after hitting the connect button
CuBz90 said:
Correct. As long as you use the CSC file and not the HOME_CSC file.
Click to expand...
Click to collapse
I was research for this csc and change csc, and i have question. my product is ETL. if i only flash firmware from DBT with includec CSC, not HOME_CSC. does it auto change to DBT, or i must remove sim card while phone 1st. boot up? some guys says bcuz most firmwares is OXM it will stay already to ETL will not changing... can u give me answer for that? thank you so much