Related
I plan on primarily using it for XBMC. The support looks good, along with the price and specs. What do you guys think?
I think it depends on how you plan to access your media. If you plan to use a NAS, you might be alright; if you were planning to use an external drive from the USB port, you need to wait for the OUYA team to fix the problem with detection of the hard drive. Also, you may find yourself needing to use the gamepad to control the interface--if that's a deal breaker you need to plan accordingly.
Also, bear in mind that the XBMC for Android is still in early alpha!
Sent from my Nook HD+ using Tapatalk HD
As someone who had never used XBMC or Plex (or anything else like that for that matter) prior to this past month, I am so excited about how well XBMC works with the OUYA!
You sound like someone who has used it before. If you're familiar with the basics then getting the OUYA to run XBMC in (almost) flawless 1080p is...well...easy! With the release of an official version of XBMCHUB last week, I don't think I'll ever hook my laptop up to my TV again.
Going into the OUYA, I had no idea of it's potential as a do-all media center. I was hoping it'd have Netflix and flash content, but that's about as far as I had hoped, so I'm very excited about all of this.
At only $99, I've been hearing people say there is no better box for XBMC, but maybe other, more experienced people could chime in.
EDIT/ADDITION:
bornagainpenguin said:
I think it depends on how you plan to access your media. If you plan to use a NAS, you might be alright; if you were planning to use an external drive from the USB port, you need to wait for the OUYA team to fix the problem with detection of the hard drive. Also, you may find yourself needing to use the gamepad to control the interface--if that's a deal breaker you need to plan accordingly.
Also, bear in mind that the XBMC for Android is still in early alpha!
Sent from my Nook HD+ using Tapatalk HD
Click to expand...
Click to collapse
I'm not sure what USB port problem you mean? I am using a 1TB WD USB HDD and have no problems with read.
I personally bought the ouya strictly for XBMC. I've used xbmc streaming from smb shares since original Xbox and it was called Xbox media center. I still use original Xbox with xbmc and the ouya is its replacement. Xbmc works amazingly better on it even in its alpha state. Those guys are pros and I have every faith they will deliver on the android platform. The only caveats so far is that I'd like a remote control instead of controller and it doesn't exist yet. Perhaps in the future it will. I've set my ouya to boot directly into xbmc but like above poster said the USB support needs work and the issue with the ouya turning itself on when its asleep and not shut down. That's annoying. Also don't plan to use WiFi. Ouyas metal casing hinders WiFi too much for streaming video in decent quality.
JLCollier2005 said:
EDIT/ADDITION:
I'm not sure what USB port problem you mean? I am using a 1TB WD USB HDD and have no problems with read.
Click to expand...
Click to collapse
I have a 2TB WD drive and a 3TB Toshiba drive, both using external power. With either of them if I plug in the drive light comes on and blinks but the OUYA doesn't mount it no matter how long I wait. One is formatted as FAT32, the other as NTFS. It makes no difference.
The workaround I've found (don't remember where I saw this originally) is to plug in the drive while the OUYA is powered off and unplugged, then do a system reset. After this, the external drive is recognized and mounted as /usbdrive and the light on the drive only flashes when being read from or written to. I can install XBMC, scan my movies and shows into the library, use the external drive for my emulator roms, etc, etc. It works.
The problem is if I remove the drive for any reason or if I get an update the drive is no longer recognized and I need to do another system reset again, add back all my games, reinstall XBMC and rescan my library (import doesn't seem to work for me) and hope that I don't have to deal with another system update any time soon....
That's why I'm not currently recommending the OUYA if people plan to use an external hard drive to access their media. I'm not the only one with these issues, if you Google for OUYA and external drive you'll see many others are having the same issues.
Sent from my Nook HD+ using Tapatalk HD
Ouya is stuck on 60hz framerate. So 24hz or 50hz files will have some stutter. Maybe stutter is not the right description, it's not perfectly smooth due to framerate adapting to 60hz. I have XBMC with hardware acceleration installed, it really is framerate conversion (or whatever you call it) that causes this.
I like XBMC on Ouya but prefer a media player that adapts its framerate output to the media file, like my Boxee Box does. You'll have a perfectly smooth picture. It really is a lot better to look at.
Using the XAF edition while I wait for Gotham to become stable for android. Works amazingly well.
Sent from my SGH-I317M using Tapatalk 2
Does Dolby digital and dts work with this?
Sent from my Nexus 4 using Tapatalk 2
wouwout said:
Ouya is stuck on 60hz framerate. So 24hz or 50hz files will have some stutter. Maybe stutter is not the right description, it's not perfectly smooth due to framerate adapting to 60hz. I have XBMC with hardware acceleration installed, it really is framerate conversion (or whatever you call it) that causes this.
I like XBMC on Ouya but prefer a media player that adapts its framerate output to the media file, like my Boxee Box does. You'll have a perfectly smooth picture. It really is a lot better to look at.
Click to expand...
Click to collapse
Yeah, I read about that. Is that a limitation that can be fixed with development, or is it impossible?
bornagainpenguin said:
I think it depends on how you plan to access your media. If you plan to use a NAS, you might be alright; if you were planning to use an external drive from the USB port, you need to wait for the OUYA team to fix the problem with detection of the hard drive. Also, you may find yourself needing to use the gamepad to control the interface--if that's a deal breaker you need to plan accordingly.
Also, bear in mind that the XBMC for Android is still in early alpha!
Sent from my Nook HD+ using Tapatalk HD
Click to expand...
Click to collapse
I have a 1TB Seagate with which I used to have the problem with it not being recognized by my Ouya. Since then I have tried different OTG mounting apps. The best I've found is an app called Paragon which mounts USB drives to '/mnt/usbdrive' by default and has full NTFS read/write capabilities. Also it's automated so it mounts the USB drive at startup without any prompting. The only thing is it requires full root and superuser access. Not a big deal, but a formality nonetheless. Mainly I'm just saying that's there's simple enough workarounds for the Ouya's external hard drive issues.
Also the XBMC Android build found here (http://forum.xbmc.org/showthread.php?tid=152005) works great on my Ouya. Navigating using the gamepad may be a little clunky but the capabilities of using the Ouya for full media playback is already there. Hell, I'm working on turning an Ouya into a full-fledged internet/digital PVR box.
just got my Ouya yesterday and I had xbmc with the 0.6 release installed and the xbmchub fusion wizard thing installed. The issues I have encountered are typing on that xbmc keyboard with only the touchpad is a very arduous experience. Navi-x is installed alongside all the 1 channel stuff but this has a script error but does not stop it from working.
It does crash in navi-x but the speed at which this thing boots up and restarts is rapid so it does not cause that much of a headache, but dont forget that this info comes from less than 24 hours usage.
Overal i am happy with this device and the xbmc install but i would like a easier way of starting the software similar to netflix on the apple tv as the kids can play what they like and not get on my back.
Skater4599 said:
...The only caveats so far is that I'd like a remote control instead of controller and it doesn't exist yet...
Click to expand...
Click to collapse
There are two remotes for XBMC the official remote doesn't seem to work for me. But Yatse works well but drains my phones battery really fast. And as a response to a USB drive not working, I have a 2TB WD Passport for my Ouya that works like a charm.
binome- said:
There are two remotes for XBMC the official remote doesn't seem to work for me. But Yatse works well but drains my phones battery really fast. And as a response to a USB drive not working, I have a 2TB WD Passport for my Ouya that works like a charm.
Click to expand...
Click to collapse
I'm talking an IR remote that can turn the console on/off as well... I have the android app remote working just fine. the official one even.
NssOne said:
I have a 1TB Seagate with which I used to have the problem with it not being recognized by my Ouya. Since then I have tried different OTG mounting apps. The best I've found is an app called Paragon which mounts USB drives to '/mnt/usbdrive' by default and has full NTFS read/write capabilities. Also it's automated so it mounts the USB drive at startup without any prompting. The only thing is it requires full root and superuser access. Not a big deal, but a formality nonetheless. Mainly I'm just saying that's there's simple enough workarounds for the Ouya's external hard drive issues.
Click to expand...
Click to collapse
Perhaps, but so far the OUYA has been the only Android device I've not felt a need to root and I'd like to keep it that way. Maybe it's just an artificial distinction, but to my mind if I have to root to get basic functionality then the OUYA ceases to be a console (plug and play) and becomes a small computer. If I'm to treat the OUYA as a small computer then I may as well simply run Cyanogen Mod and not waste any money with the OUYA games, because I'll be too busy mapping the game pad to play the many titles available in the Play Store. It becomes a silly, pointless waste of time and money, because I have several desktops which I can use on my television and had in the past been running XBMC just fine on those desktops with my 5.1 surround sound card and speakers.
I bought the OUYA because it promised me XBMC + Games + Android in a simple to use console. Most of those interested in the OUYA as and XBMC box are also people who've already run XBMC on their televisions via an old desktop or htpc, and want a console which will make doing this easier and standardized to just work. We already hacked together something on the desktop; we're looking for the easy button.
Otherwise, we'd have just bought a Midnight box or a Pivos....
I'd say yes.
I've got XBMC running on a load of devices, Raspberry Pi, Pivos Xios DS, Odroid U2, Nexus 7, HTC One X, Intel i5 w/ATI 7770... The RPi and Pivos are sluggish, the Odroid very buggy, the Nexus, One X and Ouya (all tegra 3) are very usable and provide nearly as smooth an experience as the powerful PC.
There are a few bugs still being ironed out but none are show stoppers. The current libstagefright build works nicely enough and will only get better. We should have an interim 12.2 build hit the Ouya store soon which will be mostly bug free and feature complete.
For remote the controller is ok and will be better when they finish key mapping it. You can also connect the ps3 bluetooth media remote which makes for a better experience. Other options are IR remotes that present as keyboards or the FLIRC device.
The main thing to bare in mind is that the Ouya is a pretty new device with lots of development being done every day, something like 10 OS updates in the past 4 months - give the devs time and we'll have a very nice little Tegra 3 box; I'm looking forward to seeing where we'll be in 6 months time. Not to mention the work being done on XBMCs side. A lot of core devs are working on supporting the Ouya as they all have the device.
Sent from my Nexus 7 using Tapatalk 2
NssOne said:
I have a 1TB Seagate with which I used to have the problem with it not being recognized by my Ouya. Since then I have tried different OTG mounting apps. The best I've found is an app called Paragon which mounts USB drives to '/mnt/usbdrive' by default and has full NTFS read/write capabilities. Also it's automated so it mounts the USB drive at startup without any prompting. The only thing is it requires full root and superuser access. Not a big deal, but a formality nonetheless. Mainly I'm just saying that's there's simple enough workarounds for the Ouya's external hard drive issues.
Also the XBMC Android build found here (http://forum.xbmc.org/showthread.php?tid=152005) works great on my Ouya. Navigating using the gamepad may be a little clunky but the capabilities of using the Ouya for full media playback is already there. Hell, I'm working on turning an Ouya into a full-fledged internet/digital PVR box.
Click to expand...
Click to collapse
I am also trying to replace cable TV with my Ouya and use it as a DVR. I would love some help, tips on getting it done.
* I have XBMC installed, but it doesnt see my network drives (shared drives on a Win7 PC), although all my other PCs can see them and use them?
* I planned on downloading the TV shows from 'sources' on the web, but wasn't sure how to setup auto gather new shows?
* I heard about Sick Beard and Coach Potato, but I never used them, I would love a guide or steps to help me set it up
* I wanted to get Amazon Video working too, since I pay for Prime, no official app, and I couldn't get a good Android one yet?
* Wouldn't mind having Hulu and Netflix too, I heard the google tv apks are best - any comments on that?
Anything you could help me with, would be very appreciated. I hate overpaying for Cable, and the service/quality sux
bornagainpenguin said:
I bought the OUYA because it promised me XBMC + Games + Android in a simple to use console. Most of those interested in the OUYA as and XBMC box are also people who've already run XBMC on their televisions via an old desktop or htpc, and want a console which will make doing this easier and standardized to just work. We already hacked together something on the desktop; we're looking for the easy button.
Otherwise, we'd have just bought a Midnight box or a Pivos....
Click to expand...
Click to collapse
You can't blame the lack of XBMC support on Ouya, it was up to the XBMC team to follow through on that. Ouya only announced it was going to come to the Ouya because that's what XBMC said on their own website. They're finally working on an Ouya fork for the next XBMC release, probably integrating libstagefright into it (because those work best on the Ouya).
And you could've gone for one of those other boxes. They're around the same price as an Ouya. I was a KS backer but I supported it hoping, yet not expecting, some ROM dev support for the console. I know there's CM10 but I'm going to wait for better unlocking of the system before I go full custom ROM. Unless the custom ROMs have better overscan compensation support already (a huge issue with Ouya on my TV).
Zehrfox said:
I am also trying to replace cable TV with my Ouya and use it as a DVR. I would love some help, tips on getting it done.
* I have XBMC installed, but it doesnt see my network drives (shared drives on a Win7 PC), although all my other PCs can see them and use them?
* I planned on downloading the TV shows from 'sources' on the web, but wasn't sure how to setup auto gather new shows?
* I heard about Sick Beard and Coach Potato, but I never used them, I would love a guide or steps to help me set it up
* I wanted to get Amazon Video working too, since I pay for Prime, no official app, and I couldn't get a good Android one yet?
* Wouldn't mind having Hulu and Netflix too, I heard the google tv apks are best - any comments on that?
Anything you could help me with, would be very appreciated. I hate overpaying for Cable, and the service/quality sux
Click to expand...
Click to collapse
1) I don't use network shares on my XBMC Ouya setup right now. All video files are stored locally to the external hard drive I have connected to my Ouya.
2 & 3) I actually couldn't get the Sick Beard Android app to load on the Ouya. I ended up buying an app called PowerNZB which came with its own Sick Beard server. It's just not as automated right now as it would be on PC when used in conjunction with SabNZBd and I hope to see that change soon. I don't know if I can talk about what 'web sources' I use openly either, but you can figure it out. Also I'll just bluntly tell you to Google Sick Beard tutorials to get a better idea of how to use it.
4 & 5) No clue. I don't have any of these on my Ouya at all. Sorry if I'm not as much help as you'd like.
NssOne said:
You can't blame the lack of XBMC support on Ouya
Click to expand...
Click to collapse
I don't.
As far as I'm concerned, XBMC has already produced a build for the OUYA which works quite well and which I expect to continue to get better and better. Instead I blame OUYA for being unable to (or unwilling?) to fix USB drive detection.
Sent from my Nook HD+ using Tapatalk HD
I appreciate the help
* at NssOne - Thanks, I do appreciate the help I wanted to use the network shares, that way I could have my win7 pc obtain all the shows and movies for me, using PC software, then place it on a shared network drive, where the Ouya could access them and play them. I figured that would be easier that having the Ouya run all that software and handle all those processes.
Which version of XBMC works best on Ouya, I saw several people post different versions, I know you need HW accel, but an exact file name or link would be appreciated.
Is Sick Beard better than Coach Potato? - I have never used either one? will they look for new shows and grab them for me?
Any one else trying to replace Cable TV with Ouya and XBMC? - Any advise, tips, software suggestions?
For XBMC Google the libstagefright version. And I don't know the difference between Sick Beard and Couch Potato. I've stuck with Sick Beard the whole time.
Those of you with GTX 600/700 series GPUs in your desktops might be interested in Limelight. Limelight is a 3rd party client for Nvidia's GameStream protocol (same software the Nvidia Shield uses). We've used the Ouya as one of our main test platforms and it works very well (with hardware accelerated H.264 decoding) as of the latest update. Tegra 3's H.264 decoder is very good, and can even handle 1080p60 (although the quality is bad for now due to issues with Nvidia's encoding profile on the PC side)
Over Ethernet, it streams 1080p30 or 720p60 flawlessly with low input latency.
Depending on your router and the location of your Ouya, 720p30 (or higher) over WiFi may also work.
The Ouya controller is fully supported, along with the Xbox 360 and PS3 controllers. The Ouya controller's touchpad works for controlling the mouse while streaming. The main problem with the Ouya controller is the lack of a Start and Back button (like the Shield/Xbox/PS3). The Ouya button is mapped to Start but it seems to work inconsistently. PS3 and Xbox 360 controllers are recommended if you need those buttons.
Right now, you'll have to sideload this app but we could put it on the Ouya store if people like it.
The download link is in the main post on the Shield forum: http://forum.xda-developers.com/showthread.php?t=2505510
Hopefully you all enjoy it. Feel free to post Ouya-specific issues here or general issues on the main thread.
Very cool... Thanks for posting!
Have 3 Ouya's all able to stream 1080p 30fps. Pretty darn playable. Artifacting is the only issue I have with these and the ouya's but as cgutman said that is more of problems on the host machine encoding. Defiantly enjoying this. Well done sir.
I do have a problem streaming from Galaxy SII, but thats the only device so far that was not able to stream from my GTX 770.
Hello all,
The main reason I bought an Nvidia Shield Android TV was to replace my PS3 as a media server and most importantly to free up my desktop so my wife could use it for her work.
However, I've since discovered that the shield game streaming facility uses up the monitors, keyboard and mouse, rendering the desktop PC a complete slave to the shield console, it doesn't stream the game silently in the background like say a media server would like plex or whatever.
I've tried installing the drivers for the onboard graphics card, sticking a HDMI cable in the back of one of the monitors and using the onboard HDMI, using that monitor's interface as the primary one so my wife could use it, but when I try and stream a game on the shield it just tells me that the GeForce GPU needs to be the primary source.
A bit annoying, I might need to fork out some money on a new machine just so she can use the desk, we don't have much room in the house.
I can't really think of any other way to get around this. Anyone else had any luck??
any help would be greatly appreciated!!
many thanks
Antóin
As far as I have seen there is no software to do what your wanting.
darhoade said:
As far as I have seen there is no software to do what your wanting.
Click to expand...
Click to collapse
That is truly a bummer...
antoin_currie said:
Hello all,
The main reason I bought an Nvidia Shield Android TV was to replace my PS3 as a media server and most importantly to free up my desktop so my wife could use it for her work.
However, I've since discovered that the shield game streaming facility uses up the monitors, keyboard and mouse, rendering the desktop PC a complete slave to the shield console, it doesn't stream the game silently in the background like say a media server would like plex or whatever.
I've tried installing the drivers for the onboard graphics card, sticking a HDMI cable in the back of one of the monitors and using the onboard HDMI, using that monitor's interface as the primary one so my wife could use it, but when I try and stream a game on the shield it just tells me that the GeForce GPU needs to be the primary source.
A bit annoying, I might need to fork out some money on a new machine just so she can use the desk, we don't have much room in the house.
I can't really think of any other way to get around this. Anyone else had any luck??
any help would be greatly appreciated!!
many thanks
Antóin
Click to expand...
Click to collapse
I guess you misunderstood what they meant by streaming the game form your pc. All your Shield TV is doing is being a controller basically. Your PC is actually sending a h.264 video of what is on your PC to your Shield TV.
lol
I agree, I wish it did it in the background as well. Hopefully that is the option in the future as streaming matures. I'd take a slightly lower quality (720p 60fps) if it meant my wife could use the PC while I stream a game.
try this with most of your games on your current machine as is. while yes there might be a few you can multitask with, alot of apps and programs require "focus". focus is what happens when your background windows jump to the foreground. you cant click on and interact with background windows without putting them into focus. yes you can leave them running but games require this same interaction. its just the way most operating systems and programs work.
again, yes i realize that some games do allow this, but not all, as it comes down to how the game is programmed, therefore its not nvidia's fault. Some games dont even allow you to play with the gamepad if the game is not in focus. Hope this helps better understand the situation.
Hello, do you can turn monitor off?
just bought 50 inch 4k lcd tv, brand is tcl
it plays anything i tried so far (with exception of dts audio, but this is easy to convert with avidemux)
the thing is - smart tv functions is pure [email protected]
around 1 minute to start, 10 seconds to open youtube, and 30 seconds of buffering
what is most annoying is just 360-480p video with no settings to change that
so i need to buy some android box that will:
play all 1080p media smoothly
play 1080p youtube videos
run skype with external camera
allow me to run some games etc.
there is plenty of solutions but shield seems to combine decent specs, good design and reasonable price
can anyone confirm that it will work ok with external webcam (both video and microphone?)
PLEASE DELETE THIS POST... I believe the OP was complaining about the functionality in his TV.. Not the Shield
I have no issues whatsoever playing any 1080p videos from the net or from my home network.
I'm guessing you are running wireless and / or have a slow internet connection. Try putting a 1080p video on a usb stick or memory card and playing it from there.
I'm running wired gigabit and have a 100Mbs Internet speed and this box really shines, even with 1080p Game streaming through their service.
my only issues with the Shield TV are:
* It only comes with a North America-spec power adapter, with a proprietary device-side connector. I think you can change the power pins, but it only comes with an american one in the box (not really an issue if you live in north america)
* The controller is a bit rubbish
It's very fast, and it plays all the media I throw at it through Plex, although with some of the high bitrate stuff, it complains about low connection over wireless - it doesn't seem to connect via 802.11ac all the time.
The games are just your standard Android fare. Games & apps can be installed from the Play Store website if they don't show up on the built-in one. Be aware though; some of them say that they work on AndroidTV but don't actually do any such thing.
I love mine, I got it to replace an old acer revo which was running openelec.
The apps I use the most are Kodi (all in one media streaming app), Retroarch (an app which allows you to play various emulators), Youtube, Twitch, iPlayer, and Gamestream. I havent tried the subscription based game stream option that Nvidia offer as I have the majority of the games which they offer. I do use the option which allows me to stream games from my pc. This runs superbly at 1080p over homeplugs.
The device is very quiet and very fast. I also like having a headphone socket on the remote and joypad.
I would like to see some more UK based media apps on the store (4OD, 5 on demand, Sky), my Xbox One is better for this. Kodi does have addons to get around the lack of this.
The google play store does seem a bit limited for android tv at the moment.
I did have to root mine to enable me to write to the sdcard (for Retroarch).
I would highly recommend one if you want to use Kodi or Emulators.
DrSeahorse said:
I would highly recommend one if you want to use [...] Emulators.
Click to expand...
Click to collapse
I agree with this. In fact, I now remember this was my major reason for buying it. It emulates pretty much anything up to and including the Sega Dreamcast, but once again.. it has a pretty rubbish controller. However, it does support the XBox 360 pad if you have the wireless adapter for it, so that's an improvement, and I'm pretty sure it'll natively support any controller that Linux does - so all your USB adapters for your NES or PSX or whatever controller will work.
Gotta throw my opinion in since I've only had it for about 2 weeks now...
Its fast, and I must much better interface than what i was expecting. I bought it for primarily playing PC games from my computer and it does so without any problems at all. It even will pass through full surround sound from the games (which I was NOT expecting).
I also use KODI more than anything and it works great. I do have some sound sync issues here and there and it can be annoying to remedy. But, if you put the time in and use KODI's audio delay correctly you can fix it. (the Wiki will say to use the Shield's built in HDMI-Audio Sync feature, but it doesn't have an overlay for when you are setting the delay. So you basically have to base it entirely off the bouncing ball which doesn't help at all when you are trying to sync voices to the actors mouths. Plus, I found that 0ms works great for all audio syncing through shield (netflix, youtube, etc) and the KODI sync lets me sync JUST KODI.
I only paid $150 for mine since I got in on the controller bundle and they never sent me the controller so I got the $50 refunded. I still would recommend it at $200 though. Once the MM update comes out it will be much better for customizing the start screen.
DO IT is my short answer.
As a media player, about the only thing it lacks is Amazon Prime, though there is a workaround and rumors of official support later. I've been able to play high bitrate rips, Hi10p video, a 1440p VHS 10-bit rip, and everything else with no issues over 802.11ac. It's by far the best player I've seen for SlingTV, also.
Anything that doesn't work natively, you can just cast it to the Shield TV and you're in business (HBO Go, specifically, because Comcast is stupid).
Games work well enough as long as they have controller support. Most of the higher-end and big developer games do. There's Nvidia game stream you can test for 3 months, but I don't have any use for it, honestly. I think you can also stream games from a PC with an nVidia GPU, but I have AMD.
Basically they've built the best video player on the market, hands down. The next best thing is a full-blown HTPC, but the price and lack of a simplified UI (IMO) puts the Shield on top, again.
I have my M.O.J.O. in my living room and I use it for SPMC(kodi)/NetFlix/Hulu/etc and not much gaming. But I was researching and came across articles such as https://www.engadget.com/2013/11/10/nvidia-gamestream-third-party-devices/
So, the question is: Did nvidia gamestream capabilities ever make it over to the M.O.J.O. or was it all just hype on Mad Catz's part to sell more units? And if it was never officially brought over to the M.O.J.O., is it still possible? Or is it just a waste of time and energy at this point?
I'm looking at wanting to possibly play some pc steam games from the comfort of my living room, so I'm entertaining all options at this point. Do I sell the M.O.J.O. and by a Shield TV? Do I buy a Steam Link? Are there other options?
Hi @greevedogg It did make it to the MOJO... only via a third party client. The project is called Moonlight
It works amazingly well, I've played for hours streaming from my PC to my MOJO
A couple of suggestions: Firstly I found my MOJO starts jittering after playing on in for anything over half an hour. I eventually found out that the MOJO was over heating. I guess it's working pretty hard with all that streaming. I found that if i stand it on it's side, leaving a little gap underneath, there will be better airflow, and it no longer jitters.
Also they suggest using ethernet instead of WIFI, I can agree with this, you get serious lag if you play over WIFI... don't even try it. I play on an ethernet over power adapter and it works perfectly.
You need at least an Nvidia 650 card, and I found it necessary to manually add some games, as they weren't always detected by the Nvidia client.
High FPS games worked perfectly - like DIRT3 but point and clicks are more fun when lying on the couch - have fun with your MOJO
You can find the play store link here: https://play.google.com/store/apps/details?id=com.limelight.root
And the project homepage here: http://moonlight-stream.com/
Thanks @timjharvey! Yeah, I actually stumbled upon the Moonlight option after posting this thread! I had 2 Radeon 1gb video cards in crossfire set up on my pc, but I just switched them out for a 4gb GTX 1050 Ti card, so I could try out Moonlight. Like you said, it works surprising well, from what I have tested out so far... I only tried Counterstrike: Source for a brief moment the other night with a crappy BT keyboard. In the near future, I'll hook up a better set up and load up another game. I am hard-wired with ethernet, so it's pretty snappy there. Traditionally, I'm more of a keyboard and mouse gamer, but I might try to get used to the C.T.R.L.R. if it'll map out keys correctly...I think I'll also try to hook up the good kb & m just for s & g's. Thanks again for the input!
greevedogg said:
I have my M.O.J.O. in my living room and I use it for SPMC(kodi)/NetFlix/Hulu/etc and not much gaming. But I was researching and came across articles such as https://www.engadget.com/2013/11/10/nvidia-gamestream-third-party-devices/
So, the question is: Did nvidia gamestream capabilities ever make it over to the M.O.J.O. or was it all just hype on Mad Catz's part to sell more units? And if it was never officially brought over to the M.O.J.O., is it still possible? Or is it just a waste of time and energy at this point?
I'm looking at wanting to possibly play some pc steam games from the comfort of my living room, so I'm entertaining all options at this point. Do I sell the M.O.J.O. and by a Shield TV? Do I buy a Steam Link? Are there other options?
Click to expand...
Click to collapse
timjharvey said:
Hi @greevedogg It did make it to the MOJO... only via a third party client. The project is called Moonlight
It works amazingly well, I've played for hours streaming from my PC to my MOJO
A couple of suggestions: Firstly I found my MOJO starts jittering after playing on in for anything over half an hour. I eventually found out that the MOJO was over heating. I guess it's working pretty hard with all that streaming. I found that if i stand it on it's side, leaving a little gap underneath, there will be better airflow, and it no longer jitters.
Also they suggest using ethernet instead of WIFI, I can agree with this, you get serious lag if you play over WIFI... don't even try it. I play on an ethernet over power adapter and it works perfectly.
You need at least an Nvidia 650 card, and I found it necessary to manually add some games, as they weren't always detected by the Nvidia client.
High FPS games worked perfectly - like DIRT3 but point and clicks are more fun when lying on the couch - have fun with your MOJO
You can find the play store link here: https://play.google.com/store/apps/details?id=com.limelight.root
And the project homepage here: http://moonlight-stream.com/
Click to expand...
Click to collapse
this is about four years too late to save the mojo, but it should work https://liquidsky.com it brings true cloud gaming to your phone, tablet, laptop, pc , n of course the mojo and no you don't need a pc of any sort
What firmware are you use?
I have problem with position of mouse
My PC 1080p and my TV 1080p, but mouse cursor has bad position
How i can fix it
My Android 4.2.2 - last official
wave_is said:
What firmware are you use?
I have problem with position of mouse
My PC 1080p and my TV 1080p, but mouse cursor has bad position
How i can fix it
My Android 4.2.2 - last official
Click to expand...
Click to collapse
Hi @wave_js I'm running Remix OS - mainly because Netflix also works on this rom. What game are you having mouse cursor issues with? Is the game that you are having cursor issues with running at 1080?