Database Users

URGENT HELP NEEDED!My i9000 just died off while charging

Hi all forummers,
I am having a big problem with my Galaxy S i9000, my model is GT-i9000. I have never root or do anything to the phone. Last night, I was just charging the phone as per normal, and when I returned to check my phone, it was off and I thought nothing of it and tried to power on the phone, but it doesn't work at all.
I tried with my USB cable, with another charger, with another battery but all in vain. I tried searching the forum for an answer or at least someone who encountered similar situation like me, but seems like I am the only one with such problem.
My phone can't power on, can't boot up, nothing, it's just a dead phone now.
Like to ask if this is a software or hardware problem, I tried connecting to the ODIN but no response, even my PC can't detect the phone when it's connected.
Can someone please help and advise??
Much appreciated!

try taking out the battery for some 5 minutes or so then put it back and plug the charger but do not turn it on

Project1.exe said:
try taking out the battery for some 5 minutes or so then put it back and plug the charger but do not turn it on
Click to expand...
Click to collapse
thanks and I tried, still the same. But funny thing is when I tried to charge it again, I can feel some heat on the battery, meaning actually power did go in but it just cannot power up..

Tasks it to the samsung repairs centre. You're still covered by warranty.
Swyped from my GT-I9000 using XDA App

Help!!! i bricked my phone!!

Hi!!
I was updating my phone and my pc just shutted down in the middle of the update... the phone just hung there... after 1/2 an hour i decided to turn it off.. and it never turned on again... it doesn´t even show the charging battery....
PLEASE HELP ME!!!!!!

Remove battery wait 5 minutes and try to go to download mode and flash phone again.

Agree mate, pull battery I'd leave for a good half hour. As long as you can get it into download (power on holding volume down and home buttons) then you can re-flash using ODIN.

it doesn't do anything.... 1/2 hour without battery... and still nothing...
any other idea?

OK, try this:
1. remove battery
2 (tricky a little bit): keeping the download buttons pressed, insert the battery
another option is to use jig, but both above options are promising only if your bootloader survived....

definitively bricked! nothing worked... so tomorrow i'll take it to my carrier and play the dumb blonde to see if they can do something ( it is still in warranty, but here in venezuela it doesn't mean much) so.. i´ll cross my fingers and wait... thanks everybody

Just let us know how it ended... wish you success with them.

hi! today i got my sgs back, they told me that the logical board was replaced...
so i think that once the bootloader is dead, not even the samsung people can bring it back..
so.. from now on... i'll do everything with a ups or in my laptop to avoid any shutdown..

Good to know, thanks for the warning.

francescopp said:
hi! today i got my sgs back, they told me that the logical board was replaced...
so i think that once the bootloader is dead, not even the samsung people can bring it back..
so.. from now on... i'll do everything with a ups or in my laptop to avoid any shutdown..
Click to expand...
Click to collapse
Great for you, probably your phone did get an overcharge that killed the board. Thi is why many people use laptops to make flash roms.

Thanks for info.. I didn't know USB can overcharge the phone..
So if I put in the surge protector for my pc, it should help protect the phone too right..?

I don't think, it can be overcharged by USB. These phones have system, that will turn off charching once charged. I have never been checking whether my phone is already fully charged and have never problems with overcharging
Sent from my GT-I9000 using XDA App

Phone won't turn on / respond to any combo of button presses

Hi all,
First post (be nice).
My phone (Oneplus Two) was fine last night (~80% battery) then i noticed it had switched off. There seemed to be no sign of life so I left it overnight.
This morning I tried vol down + power, vol up + power, just power, nothing seems to make a difference.
My computer doesn't seem to recognise the phone on usb connect either. I am not sure what to do!
There are no LED's on the phone either (not sure if that is important)
Thanks in advance! :good:

Charning?
fosb88 said:
Hi all,
First post (be nice).
My phone (Oneplus Two) was fine last night (~80% battery) then i noticed it had switched off. There seemed to be no sign of life so I left it overnight.
This morning I tried vol down + power, vol up + power, just power, nothing seems to make a difference.
My computer doesn't seem to recognise the phone on usb connect either. I am not sure what to do!
There are no LED's on the phone either (not sure if that is important)
Thanks in advance! :good:
Click to expand...
Click to collapse
Hello does it charge? Like when you plug it to a charge, will the LED glow? If not I would try to send it back for repair it could be your MB is dead.
Or you can try full recovery... if you install the special drivers it can kick in even with screen turend off. Worth a try
http://forum.xda-developers.com/oneplus-2/general/guide-unbrick-recover-oneplus-2-to-t3269543

Seimus said:
Hello does it charge? Like when you plug it to a charge, will the LED glow? If not I would try to send it back for repair it could be your MB is dead.
Or you can try full recovery... if you install the special drivers it can kick in even with screen turend off. Worth a try
http://forum.xda-developers.com/oneplus-2/general/guide-unbrick-recover-oneplus-2-to-t3269543
Click to expand...
Click to collapse
Hey, thanks for your advice. There is no LED when the phone is plugged in and the recovery didn't seem to connect to the computer.
I am at a loose end

fosb88 said:
Hey, thanks for your advice. There is no LED when the phone is plugged in and the recovery didn't seem to connect to the computer.
I am at a loose end
Click to expand...
Click to collapse
So even the guide didnt helped? Phone was not registered via the drivers to the app? In that case open an RMA with OnePlus or waranty with your seller

Seimus said:
So even the guide didnt helped? Phone was not registered via the drivers to the app? In that case open an RMA with OnePlus or waranty with your seller
Click to expand...
Click to collapse
Hey,
I think that might be the only option. Nothing happened when I tried the recovery steps. Think it may be hard bricked!
Thanks

Waranty
fosb88 said:
Hey,
I think that might be the only option. Nothing happened when I tried the recovery steps. Think it may be hard bricked!
Thanks
Click to expand...
Click to collapse
If you have a valid waranty OnePlus has no problem to fix your phone.

HELP !!! S7 Edge doesn't turn on (neither on download mode, nor on recovery mode)

So my phone was OK, when suddenly having 42% of battery it turned off and didn't turn on again. I can't access to download or recovery modes to flash it and change the ROM. The phone doesn't react even on charging (0 V, 0 A on the USB cable). Don't know what to do.
Did anybody have this problem too ? I really need to bring back this phone

Do you happen to have a blue led light and a completely black screen ?

xTweeBy said:
Do you happen to have a blue led light and a completely black screen ?
Click to expand...
Click to collapse
No, there is nothing. Just bricked phone without any sign of life.

Unfortunately, if that is the case, this may be a hardware problem related to the motherboard which needs to be replaced. Make sure to leave it for a few days then try to charge it to see if it would respond, otherwise, make also sure that this is not a display problem by checking if the device is working ( try phonecalls or so ... )

xTweeBy said:
Unfortunately, if that is the case, this may be a hardware problem related to the motherboard which needs to be replaced. Make sure to leave it for a few days then try to charge it to see if it would respond, otherwise, make also sure that this is not a display problem by checking if the device is working ( try phonecalls or so ... )
Click to expand...
Click to collapse
It is definitely the case. The battery itself gives 3.6 V but the phone is not getting it. I've seen a topic where a guy was advising to perform a JTAG flashing (can be a bootloader error) connecting the phone immediately to a power source (without battery). But not sure if I can perform it too. Any ideas ?

Bootloader errors are mainly due to motherboard malfunctions on the galaxy S7 edge, this is a very common issue where the only fix is to completely replace the motherboard, some cases can be repaired due to a reset or a stock rom flash ( which cannot be your cases because you cannot access to download more nor recovery) while others are fixed with a custom flash. Some very rare cases are also fixed with that JTAG flashing you heard of, this forces the battery to work and deliver its power to the rest of the parts, but this is a very risky operation which can damage your entire phone. If you wanna try it, I advice you to get some professional help as you can hurt yourself too in this process ! Good luck

It looks like you a main board issue. You might need to have that part replaced.

xTweeBy said:
Bootloader errors are mainly due to motherboard malfunctions on the galaxy S7 edge, this is a very common issue where the only fix is to completely replace the motherboard, some cases can be repaired due to a reset or a stock rom flash ( which cannot be your cases because you cannot access to download more nor recovery) while others are fixed with a custom flash. Some very rare cases are also fixed with that JTAG flashing you heard of, this forces the battery to work and deliver its power to the rest of the parts, but this is a very risky operation which can damage your entire phone. If you wanna try it, I advice you to get some professional help as you can hurt yourself too in this process ! Good luck
Click to expand...
Click to collapse
Thanks for the info. Is it possible to replace it with another board from another used phone ? Won't it cause any conflicts with other phone parts ?

Dude i had the same problem before 2 days and what i did was i ejected the sim tray and put usb cabel in it and hold every key and it booted up
Sorry for my bad english

AveHakob said:
Thanks for the info. Is it possible to replace it with another board from another used phone ? Won't it cause any conflicts with other phone parts ?
Click to expand...
Click to collapse
Yeah, you just have to make sure that it is completely working. But my experience shows that it doesnt end up really well, because the phone will just suffer from other malfunctions due to imcompatibility and all. So I dont recommend you doing it, if you really want to repair it, send it to the customer services !
Good luck

xTweeBy said:
Yeah, you just have to make sure that it is completely working. But my experience shows that it doesnt end up really well, because the phone will just suffer from other malfunctions due to imcompatibility and all. So I dont recommend you doing it, if you really want to repair it, send it to the customer services !
Good luck
Click to expand...
Click to collapse
Thanks. Their only recommendation is to throw away the phone because it's not going to work. Will try the official service too but not sure if they'll help me.
Creative one said:
Dude i had the same problem before 2 days and what i did was i ejected the sim tray and put usb cabel in it and hold every key and it booted up
Sorry for my bad english
Click to expand...
Click to collapse
Not quite sure how it can help, but will try it tomorrow maybe it'll work. Thanks

Same issue here, were you able to resolve it?

xTweeBy said:
Unfortunately, if that is the case, this may be a hardware problem related to the motherboard which needs to be replaced. Make sure to leave it for a few days then try to charge it to see if it would respond, otherwise, make also sure that this is not a display problem by checking if the device is working ( try phonecalls or so ... )
Click to expand...
Click to collapse
I had the same issue. As suggested that the phone may switch on once the battery is completely drained, I waited till last night and plugged it in and it started charging.
It was fine till this morning. I inserted the SIM cards and then connected to the laptop. I thought I would backup the data using smart switch before doing a factory reset. The backup went fine till 75% and then boom again turned off. This time there's a lot of battery left, and I might have to wait 4-5 days before it can be drained completely. But I'm now hopeful that it'll eventually turn on and when it does I'll immediately do a factory reset before doing anything else. I'm suspecting that a rogue app might be causing it. This time it might have happened while that app is being backed up. The LED is constant Red this time indicating the state it was connected to the laptop at the time of incident.
Is there anyway to drain battery quickly at this stage?

It turned on again last night when I connected the charger. It was showing the charging symbol. After 5-6 minutes of charge I tried to hold Vol - + Power buttons briefly to reset the device and it went off again. It's lying like a brick currently.

ilikered said:
I had the same issue. As suggested that the phone may switch on once the battery is completely drained, I waited till last night and plugged it in and it started charging.
It was fine till this morning. I inserted the SIM cards and then connected to the laptop. I thought I would backup the data using smart switch before doing a factory reset. The backup went fine till 75% and then boom again turned off. This time there's a lot of battery left, and I might have to wait 4-5 days before it can be drained completely. But I'm now hopeful that it'll eventually turn on and when it does I'll immediately do a factory reset before doing anything else. I'm suspecting that a rogue app might be causing it. This time it might have happened while that app is being backed up. The LED is constant Red this time indicating the state it was connected to the laptop at the time of incident.
Is there anyway to drain battery quickly at this stage?
Click to expand...
Click to collapse
had the same thing happen to me.
Initially crashed.
could be turned on after draining the battery(phone was still warm at times with screen off/phone off)
charged and could turn on again.
But the time it could stay on would decrease and decrease.
It then just bootlooped and with that would only accept charge turned off.
In the end I couldnt turn it on at all and it wouldnt charge.
Looking to replace my mainboard now. seems that the Flashmemory damaged itself.

Moto G5 Plus Dead (only white light blinking)

This is my first time posting here so hi everyone.
I have a problem with my moto g5+.
I purcased my moto g5+ around a year a go completely new and ended up not using it.
Now my primary device broke down and i thought its time to switch only one problem.
It won't turn on.
When I connect charger white led will consistantly blink but nothing else happens no battery charging screen , nothing.
It wasn't compleatly discharged since I charged it up till 100% and turned it off when I puted it away , i still did charge it a couple times during the year of not using it and last time was a month ago and it charged just fine.
No water or Physical Damage has been done to the phone no rooting also , it just wont turn on.
I tried hard reseting it , tried to hold power button for 5 min tried to enter boot loader to access recovery mode with no luck.
I used original charger and cable that came with phone to charge it.
Since warranty is out of the way by this point because i bought it in july im seeking a fix or recommendation here.
All help will be appreciated

ridestos said:
This is my first time posting here so hi everyone.
I have a problem with my moto g5+.
I purcased my moto g5+ around a year a go completely new and ended up not using it.
Now my primary device broke down and i thought its time to switch only one problem.
It won't turn on.
When I connect charger white led will consistantly blink but nothing else happens no battery charging screen , nothing.
It wasn't compleatly discharged since I charged it up till 100% and turned it off when I puted it away , i still did charge it a couple times during the year of not using it and last time was a month ago and it charged just fine.
No water or Physical Damage has been done to the phone no rooting also , it just wont turn on.
I tried hard reseting it , tried to hold power button for 5 min tried to enter boot loader to access recovery mode with no luck.
I used original charger and cable that came with phone to charge it.
Since warranty is out of the way by this point because i bought it in july im seeking a fix or recommendation here.
All help will be appreciated
Click to expand...
Click to collapse
It seems your device had hard bricked, you can recover it by using the blank flash file.
Here is the procedure:-
https://forum.xda-developers.com/g5-plus/help/moto-g5-plus-hard-bricked-recognized-t3636457
But, I don't understand how you are device got hard bricked as you need to downgrade or root it to get your device bricked. But you can recover it by above link.

riyan65 said:
It seems your device had hard bricked, you can recover it by using the blank flash file.
Here is the procedure:-
https://forum.xda-developers.com/g5-plus/help/moto-g5-plus-hard-bricked-recognized-t3636457
But, I don't understand how you are device got hard bricked as you need to downgrade or root it to get your device bricked. But you can recover it by above link.
Click to expand...
Click to collapse
thanks for the reply gonna try it today, I don't really understand my self how did i hard brick it but gonna try you're solution.

riyan65 said:
It seems your device had hard bricked, you can recover it by using the blank flash file.
Here is the procedure:-
https://forum.xda-developers.com/g5-plus/help/moto-g5-plus-hard-bricked-recognized-t3636457
But, I don't understand how you are device got hard bricked as you need to downgrade or root it to get your device bricked. But you can recover it by above link.
Click to expand...
Click to collapse
Tried doing this methode but my pc wont reconize the device as connected , when i connected it to the pc it showed lightning symbol like charging , i left it to charge for 2h but still nothing.

In order to use blankflash successfully your PC needs to be in test mode. To do this
Code:
Click Start, and then type cmd in the Search box.
Under Programs, right-click cmd.exe, and then click Run as administrator.
At the command prompt, type the following text, and then press Enter: bcdedit /set TESTSIGNING OFF.
Close the Command Prompt window, and then restart your computer
When you plug in phone, look at device manager, ports, and see that it is connected. It should say something like "Qualcomm HS- USB Diagnostics " with a port "Comm 7" or whatever #.
1.Be sure Qualcomm drivers are installed.
2.Make sure your Hard Bricked Moto is connected in device manager under ports .
3.Hold volume down and power until you see it connect under ports. It should say "qhsusb-bulk" You should hear a slight sound from PC when it connects. This can be very tricky as another member [ Rakesh1b] explained his method.
trick is to press and hold the power button then it disconnects and connects to pc u could hear sound from pc then press voldown and power and launch blankflash.bat at the same time i mean same time then it detects and leave the buttons once you see the script running if not it will reboot the device and after running the script it will be booted to fastboot mode . if u failed 1st time repeat same power off then remaing things same as mentioned.
Click to expand...
Click to collapse

[email protected] said:
In order to use blankflash successfully your PC needs to be in test mode. To do this
Code:
Click Start, and then type cmd in the Search box.
Under Programs, right-click cmd.exe, and then click Run as administrator.
At the command prompt, type the following text, and then press Enter: bcdedit /set TESTSIGNING OFF.
Close the Command Prompt window, and then restart your computer
When you plug in phone, look at device manager, ports, and see that it is connected. It should say something like "Qualcomm HS- USB Diagnostics " with a port "Comm 7" or whatever #.
1.Be sure Qualcomm drivers are installed.
2.Make sure your Hard Bricked Moto is connected in device manager under ports .
3.Hold volume down and power until you see it connect under ports. It should say "qhsusb-bulk" You should hear a slight sound from PC when it connects. This can be very tricky as another member [ Rakesh1b] explained his method.
Click to expand...
Click to collapse
Thanks for heads up gonna try to do it again tomorrow I hope this will work and I will be able to get my new phone runing tomorrow since I really need that phone .

ridestos said:
Thanks for heads up gonna try to do it again tomorrow I hope this will work and I will be able to get my new phone runing tomorrow since I really need that phone .
Click to expand...
Click to collapse
Good luck, as it is not an easy process. One time it took me nearly half an hour to time it right, to get blankflash to run successfully. Also I played with a phone that would never flash Vaches blankflash for the G5 + but had to use the one for addison, Moto Z play. When that happens you have to do the extra step of flashing the addison to potter files. Hopefully you won't have to do all that, but just warning that sometimes it is necessary. Like I posted before, in device manager on PC, make sure under ports it shows as qhsusb-bulk under the port it lists as. Also be sure you have adb/fastboot and all its drivers correctly installed. I am really curious as to how it got hard bricked, because even doing my test phone, it is difficult to hard brick it. I have this "test phone" that has a bad microphone, so I have run it through all kinds of crap, rather than jeopardise my every day phone.

ridestos said:
This is my first time posting here so hi everyone.
I have a problem with my moto g5+.
I purcased my moto g5+ around a year a go completely new and ended up not using it.
Now my primary device broke down and i thought its time to switch only one problem.
It won't turn on.
When I connect charger white led will consistantly blink but nothing else happens no battery charging screen , nothing.
It wasn't compleatly discharged since I charged it up till 100% and turned it off when I puted it away , i still did charge it a couple times during the year of not using it and last time was a month ago and it charged just fine.
No water or Physical Damage has been done to the phone no rooting also , it just wont turn on.
I tried hard reseting it , tried to hold power button for 5 min tried to enter boot loader to access recovery mode with no luck.
I used original charger and cable that came with phone to charge it.
Since warranty is out of the way by this point because i bought it in july im seeking a fix or recommendation here.
All help will be appreciated
Click to expand...
Click to collapse
If your phone was in oreo, you maybe want to try the addison (moto z play) blankflash, i once bricked mine and the potter blankflash always failed.
Also try the USB 2.0 ports, as the 3.0 ones doesn't recognizes it.

Put it on the charger and let it charge. IT could just be deader than disco.
Also check your cable make sure it's a data cable buddy.

pwag said:
Put it on the charger and let it charge. IT could just be deader than disco.
Also check your cable make sure it's a data cable buddy.
Click to expand...
Click to collapse
Already tried that didn't work. And I'm using included cable that came with g5+

red002 said:
If your phone was in oreo, you maybe want to try the addison (moto z play) blankflash, i once bricked mine and the potter blankflash always failed.
Also try the USB 2.0 ports, as the 3.0 ones doesn't recognizes it.
Click to expand...
Click to collapse
Well good news is , that i manged to get it to show up as the device with which i should be able to do blank flash.
The problem now is it won't stay in bootloader to be recognized as that device longer than 30 sec.
It just turns off after some time and pc automaticly wont recognize it anymore.

[email protected] said:
Good luck, as it is not an easy process. One time it took me nearly half an hour to time it right, to get blankflash to run successfully. Also I played with a phone that would never flash Vaches blankflash for the G5 + but had to use the one for addison, Moto Z play. When that happens you have to do the extra step of flashing the addison to potter files. Hopefully you won't have to do all that, but just warning that sometimes it is necessary. Like I posted before, in device manager on PC, make sure under ports it shows as qhsusb-bulk under the port it lists as. Also be sure you have adb/fastboot and all its drivers correctly installed. I am really curious as to how it got hard bricked, because even doing my test phone, it is difficult to hard brick it. I have this "test phone" that has a bad microphone, so I have run it through all kinds of crap, rather than jeopardise my every day phone.
Click to expand...
Click to collapse
Well managed to get it to point where my pc recognized phone as device buuut another thing came up. It only is recognized for max 30sec after witch phone gets disconected from pc. Any way to fix that? Or mby im doing something wrong here? I'm starting to consider battery replacment which i dont want to do because it awful to replace battery on this thing.

What is it recognised as? Battery replacement may save you from having to go through the blankflash process if the device will not stay on while plugged in. Only use blankflash if it shows as qhsusb-bulk.

[email protected] said:
What is it recognised as? Battery replacement may save you from having to go through the blankflash process if the device will not stay on while plugged in. Only use blankflash if it shows as qhsusb-bulk.
Click to expand...
Click to collapse
yes it showed up like that but like I said it wont stay on. I remembered one time when I got it to work this month. I was able to boot in to android , factory reset it but the problem was as soon i pluged in the charger phone went from 44% up to 89% in 2 sec then droped to 14% and then to 0 and turned off. I was able to turn it on again after that , it showed 44% like before the charger was connected then I tried to charge it while it was off and since then I haven't been able to go past booting screen since it just turns off after like 30sec on boot screen.
Mby i should just buy a new battery and see if that will fix it.

ridestos said:
yes it showed up like that but like I said it wont stay on. I remembered one time when I got it to work this month. I was able to boot in to android , factory reset it but the problem was as soon i pluged in the charger phone went from 44% up to 89% in 2 sec then droped to 14% and then to 0 and turned off. I was able to turn it on again after that , it showed 44% like before the charger was connected then I tried to charge it while it was off and since then I haven't been able to go past booting screen since it just turns off after like 30sec on boot screen.
Mby i should just buy a new battery and see if that will fix it.
Click to expand...
Click to collapse
I would recommend that or to take it to a service center. Using the blankflash method could brick the device forever (if it's just a battery/display problem), also you will have to live with another devices bootloader and resulting problems from that.

Wolfcity said:
I would recommend that or to take it to a service center. Using the blankflash method could brick the device forever (if it's just a battery/display problem), also you will have to live with another devices bootloader and resulting problems from that.
Click to expand...
Click to collapse
Well service center is out of the way since closest one to me is like 200km away . I should be able to replace it my self so no problems there. I just hope that maybe replacing the battery will fix everything since the phone is practicly brand new and it would be painful and expensive if it's not a battery problem but like motherboards or smth like that.

ridestos said:
Well good news is , that i manged to get it to show up as the device with which i should be able to do blank flash.
The problem now is it won't stay in bootloader to be recognized as that device longer than 30 sec.
It just turns off after some time and pc automaticly wont recognize it anymore.
Click to expand...
Click to collapse
Reboot your pc, and connect the phone to the wall charger for about 10 minutes, then try again the blankflash, and when it's done just play around with the volume up/down buttons just to keep the bootloader on, and use the g5+ toolkit to flash the oreo stock firmware
in any case, this is the blankflash i used it
https://www.mediafire.com/file/hw7hs4vve51c1qh/blankflash.zip/file

Led Light Blinking
ridestos said:
Well good news is , that i manged to get it to show up as the device with which i should be able to do blank flash.
The problem now is it won't stay in bootloader to be recognized as that device longer than 30 sec.
It just turns off after some time and pc automaticly wont recognize it anymore.
Click to expand...
Click to collapse
How did you managed to show it up as a device , i couldn't. I tried everything that i understood from written on these forums, installed qualcomm drivers , moto g5 plus drivers. The device doesn't show up in device manager, its just blinking and doesn't show anything else , i tried charging it overnight. The Led light does go away after a while when i put it o charging, but when i hold down the power button and volume down key it starts blinking again and nothing beyond that

Rather Suhail said:
How did you managed to show it up as a device , i couldn't. I tried everything that i understood from written on these forums, installed qualcomm drivers , moto g5 plus drivers. The device doesn't show up in device manager, its just blinking and doesn't show anything else , i tried charging it overnight. The Led light does go away after a while when i put it o charging, but when i hold down the power button and volume down key it starts blinking again and nothing beyond that
Click to expand...
Click to collapse
Well for me it works like this , i leave it for about 12h (over night) untouched , then after that I can put it on charger and get in bootloader with holding down power button and vol down button at the same time. I have seen some other people that have revived their phones like this usualy they say to just leave it for 24h but for me it works after 12h. if u can get in to the bootloader
after those hours and the phone doesn't turn off (like mine) I would suggest that u leave it for charging in bootloader for atleast 2h and then try to power it on in factory mode thats how I got it to work one time. I hope this will help you.

ridestos said:
Well for me it works like this , i leave it for about 12h (over night) untouched , then after that I can put it on charger and get in bootloader with holding down power button and vol down button at the same time. I have seen some other people that have revived their phones like this usualy they say to just leave it for 24h but for me it works after 12h. if u can get in to the bootloader
after those hours and the phone doesn't turn off (like mine) I would suggest that u leave it for charging in bootloader for atleast 2h and then try to power it on in factory mode thats how I got it to work one time. I hope this will help you.
Click to expand...
Click to collapse
Thanks for replying.
A few points to clear with 12 hours untouched ,do you mean i have to left phone as it is without even charging and if so after 12 hours for how much time do you charge it before getting it to bootloader and did you charge it with the moto turbo charge or just a regular charger or with computer.