Hi guys !
After latest official update sent by Samsung and after the installation the back-menu button has become does not work
i tried many way to fix the problem but still not working !.
installing Previous version of official
installing aurura s6
installing CM 12.1
and now on stock
is there any chance to restore them
Phone Touch key FW 0x12
Part Touch key FW 0x12
Related
Hey guys so i have here a nexus 4 its my mothers and its on 4.4.4 and the home keys dont work at all... back home and mulitask just wont dont anything i already restarted what should i do next?
Hi, how did you upgrade ?
blusydays said:
Hi, how did you upgrade ?
Click to expand...
Click to collapse
It was by OTA
EDIT: I just installed touchwin revocry and the keys also dont work... i also just installed andorid L and the softkeys also dont work no go...
Do a clean install. Wipe it all.
I did and nothing...
Any one?
Can you try another rom like android 4.4.2/4.3 or a custom rom like cm11?
Try installing different room as Ccody suggested
Hi guys!
I had the same issue - navigation bar was untochable in any position (vertical & horizontal). Back, home nd recent buttons were 100% inactive. Flashing stock & other alternative ROMs did not solve the problem.
So I returned my N4 to my seller. He accepted the warranty issue and replaced during the reparation:
1. Screen. So I have a brand new screen.
2. Mother board. So I have a new IMEI.
So this isue is rare and has hardware reasons
hi all, i congratulate you for this site, this is my favorite website thanks for developpers.
i have a question about a rom.
i have samsung s4 4.x.x , now i've reflashed it with 5.0.1 rom KSA, and the key menu and return not work no light, and my samsung restart and lag after somes minutes.
i've reflashed it with 20 other roms with no success.
i've findind in the net my samsung is a ja3g, and need I9500XXUAMCH rom !! where i can find it to donwload?
there is some information about my phone :
samsung s4 white 16gb
multi csc KSA
recovery flashed with philZ touch
phone touch key fw version 0x12
parts touch key fw version 0x12 (no need to update)
i've wipe data/cache/dalvik no sucess the key return and menu not work and no light.
you are professionnal and i need your help
Hey guys,
I upgraded to 6.0.1 stock rom with ODIN. Not the hardware buttons are not responding. I already tried factory reset and wipe cache. No success.
Also downgrading to 5.1.1 doesn't change anything. Buttons not working in latest 5.1.1 ... strange.
Can someone give me an advice?
Thanks!
Catscratch said:
I upgraded to 6.0.1 stock rom with ODIN.
Click to expand...
Click to collapse
Hi.. can you tell us, which ROM you used (which region-code) and of which region was your phone before?
maybe this is not the problem, but the more informations you provide, the better.
Yeah. Sure.
I don't know which firmware version I got originally installed on the phone. But first I flashed A310FXXU2BPG6_A310FOJV2BPG2_XSG (6.0.1). There hardware button don't work. So I thought ok, then I flash the latest from my country (DBT).
So I wiped everything and flashed: A310FXXU2APDC_A310FOXA2APD1_DBT.
But still no change. The ROM itself is working fine, except the hardware buttons. I wonder if it is some kernel related problem? But there should be no problem since it is all stock. I even flashed the earliest DBT firmware from samfirmware (A310FXXU1AOL7_A310FOXA1AOL7_DBT) also without success. The hardware buttons stay inactive. Really strange.
Hello everyone.
A few days ago I got the S5 - Canadian version g900w8 with FIDO firmware updated to MM. I flashed TWRP with Odin, and then the AllianceROM through recovery and the phone booted succesfully, but two capacitive keys (back and recents) are not working.
When i wake the phone both keys light for a moment. There is no reaction when i touch them they don't work in any way.
In recovery the back button is workin properly.
I tried to reflash various kernels but nothing helped.
Does anyone have an idea how to fix this?
You must flash mm rom. Alianceto is android 5
pobyrkan said:
You must flash mm rom. Alianceto is android 5
Click to expand...
Click to collapse
Yeah I got it finally and it works. But thanks anyway.
But is it possible to downgrade back to LP without such problems?
Hello guys!
I've been trying for a week to install an alternative rom on my 9515L, but I'm not getting through these issues with touch screen ..
Touch works normally on official rom, but only in it
Firstly, I installed TWRP by odin, the touch did not work on it, if installed by the app it displayed the error:
Something went wrong
Flashing recovery was unsuccessful.
Either you already have this recovery
installed or another error has
occured.Would you like to attempt
rebooting to recovery now?
Click to expand...
Click to collapse
So I installed clockwordmod, which worked normally
But if I chose the reboot system function, it showed something like:
Root Access Possibly Lost Fix
fix root (/system/xbin/su)
I thought it might be some problem with root, so I upgraded SuperSu and the error continued
I installed by CWM Cyano 12,13, MIUI, SlimRom, Omega (which is based on a samsung rom), and none of them worked the touch
So I thought it might be a problem with the driver, if I type *#2663# in the official lollipop rom it displays:
Firmware version
...
Phone's Touch Key FW version: 0x12
Part's Touch Key FW version: 0x12
Click to expand...
Click to collapse
So I decided to try to install a previous version of the driver and for this I installed the official rom of kitkat, in it the driver went to version 0x10. And yet the problem continues
The Touch worked perfectly on this kitkat rom. I noticed that it works only in official roms.
Could you give me a hint of what I could do?
Sorry for bad English.
Are you sure you installed ROMs for the GT-I9515?
The only reason why the touch wouldn't work is that the ROMs and TWRP you installed are for a different model.
And I assume the GT-I9515L and GT-I9515 are the same hardware-wise.
Pwnycorn said:
Are you sure you installed ROMs for the GT-I9515?
The only reason why the touch wouldn't work is that the ROMs and TWRP you installed are for a different model.
And I assume the GT-I9515L and GT-I9515 are the same hardware-wise.
Click to expand...
Click to collapse
Actually, I was installing everything for 9505, I found a version of RR for 9515 and it worked very well .. I finally managed to remove that horrible samsung rom, thank you very much!
You could safely use i9505 ROMs with kernel patch. Search on general subforum.
Sent from my ASUS_Z00A using XDA Labs