Hello guys!
I've been trying for a week to install an alternative rom on my 9515L, but I'm not getting through these issues with touch screen ..
Touch works normally on official rom, but only in it
Firstly, I installed TWRP by odin, the touch did not work on it, if installed by the app it displayed the error:
Something went wrong
Flashing recovery was unsuccessful.
Either you already have this recovery
installed or another error has
occured.Would you like to attempt
rebooting to recovery now?
Click to expand...
Click to collapse
So I installed clockwordmod, which worked normally
But if I chose the reboot system function, it showed something like:
Root Access Possibly Lost Fix
fix root (/system/xbin/su)
I thought it might be some problem with root, so I upgraded SuperSu and the error continued
I installed by CWM Cyano 12,13, MIUI, SlimRom, Omega (which is based on a samsung rom), and none of them worked the touch
So I thought it might be a problem with the driver, if I type *#2663# in the official lollipop rom it displays:
Firmware version
...
Phone's Touch Key FW version: 0x12
Part's Touch Key FW version: 0x12
Click to expand...
Click to collapse
So I decided to try to install a previous version of the driver and for this I installed the official rom of kitkat, in it the driver went to version 0x10. And yet the problem continues
The Touch worked perfectly on this kitkat rom. I noticed that it works only in official roms.
Could you give me a hint of what I could do?
Sorry for bad English.
Are you sure you installed ROMs for the GT-I9515?
The only reason why the touch wouldn't work is that the ROMs and TWRP you installed are for a different model.
And I assume the GT-I9515L and GT-I9515 are the same hardware-wise.
Pwnycorn said:
Are you sure you installed ROMs for the GT-I9515?
The only reason why the touch wouldn't work is that the ROMs and TWRP you installed are for a different model.
And I assume the GT-I9515L and GT-I9515 are the same hardware-wise.
Click to expand...
Click to collapse
Actually, I was installing everything for 9505, I found a version of RR for 9515 and it worked very well .. I finally managed to remove that horrible samsung rom, thank you very much!
You could safely use i9505 ROMs with kernel patch. Search on general subforum.
Sent from my ASUS_Z00A using XDA Labs
Related
Hello everybody,
i just put the a custom rom for the first time and i am actually really happy with this rom.
My friend called me 1h ago, so i noticed that i am hearing my friend fine, but the problem is that he cant hear me.
I tested it with the audio capture and it just sound messy.
Here are all the information:
Omega v33 - XXUGNF1
Android Version 4.4.2
Modellnummer: GT-19505 Black Edition
Basisbandversion I9505XXUGNF1
Kernel:3.4.0-talexop-2+-gb4fe160-dirty
[email protected]#4
I just tried it with the 3.4.0-Adam-2.3, but it is not working, too.
Did i install something wrong?
So which kernel is the right one for me to get the sound problem fixed?
varity said:
Hello everybody,
i just put the a custom rom for the first time and i am actually really happy with this rom.
My friend called me 1h ago, so i noticed that i am hearing my friend fine, but the problem is that he cant hear me.
I tested it with the audio capture and it just sound messy.
Here are all the information:
Omega v33 - XXUGNF1
Android Version 4.4.2
Modellnummer: GT-19505 Black Edition
Basisbandversion I9505XXUGNF1
Kernel:3.4.0-talexop-2+-gb4fe160-dirty
[email protected]#4
I just tried it with the 3.4.0-Adam-2.3, but it is not working, too.
Did i install something wrong?
So which kernel is the right one for me to get the sound problem fixed?
Click to expand...
Click to collapse
Hi ,
That problem most of the times is modem related , go Omega files /modem flash the same one again or upgrade it to the newest , follow instructions to do it
As shown in OP of Omega V33
Installation:
1. Backup your device (nadroid backup, titanium backup, efs backup ... etc) and save the backup to a safe place.
2. Flash the new bootloder and modems with odin
Bootloader -> BL_I9505XXUFNAD_481100_REV06_user_low_ship_MULTI_C ERT.tar.md5
If you already have the new Kit Kat bootloader there is no need to flash it again.
Modems XXUFNC9 -> I9505XXUFNC9_GSM_LTE_Modems.tar
Power off device completely, then boot to download mode and flash bootloader (if needed) and modems with odin
Then boot to android and check if the new modem XXUFNC9 flashed ok (if wifi is not working is normal)
3. Boot to Recovery --recommended TWRP, get the latest version from here -> http://teamw.in/project/twrp2/182--
and flash Omega and then boot to android.
You can flash without full wipe if you are coming from a previous Omega Kit Kat version, if not then flash with full wipe
PLEASE FOLLOW THE EASY INSTALLATION INSTRUCTIONS ELSE YOU WILL HAVE VARIOUS ISSUES!
BACKUP FIRST !!
I flashed the LTE_Modem_I9595XXUGNF1 again, but it is still the same problem.
Can i test an older one without any problems, or do you know anything else to solve my problem?
varity said:
I flashed the LTE_Modem_I9595XXUGNF1 again, but it is still the same problem.
Can i test an older one without any problems, or do you know anything else to solve my problem?
Click to expand...
Click to collapse
Mate ,
You have a I9505 or a I9595??
MAX 404 said:
Mate ,
You have a I9505 or a I9595??
Click to expand...
Click to collapse
pardon mistyped. I9505 is the right one.
varity said:
pardon mistyped. I9505 is the right one.
Click to expand...
Click to collapse
You can try with an older one if you wish and see if it helps , did you flash the GSM modem also?
MAX 404 said:
You can try with an older one if you wish and see if it helps , did you flash the GSM modem also?
Click to expand...
Click to collapse
Yes i installed both. I will try some of the LTE/GSM modems now.
I still have the microphone issue.
I Updated the baseband (GSM+LTE) to the newest I9505XXUGNF1, but i cant fix this microphone problem. It sounds like it is raining or something like the television where u cant get a programm.
I searched now about 5hours, but this is something i cant get fixed.
Please anyone here who can help with this issue?
Hi all, this is my first ever post so please bear with me!
I have a Note 4 sm-910f. I rooted recently and have the latest TWRP installed. I have tried to install a number of ROMs but:
If I install AOSP based I get a "Failed" error and a note to say that the ROM is not the correct one for the device - it seems to get my device wrong too?!
If I install a Touchwiz ROM such as NoteX it appears to flash OK but it just keeps bootlooping upon restart.
Any ideas? Could it be anything to do with the modem or bootloader? I'm currently on stock 5.0.1.
Any help greatly appreciated!
Cheers
Bugsie
bugsie857 said:
Hi all, this is my first ever post so please bear with me!
I have a Note 4 sm-910f. I rooted recently and have the latest TWRP installed. I have tried to install a number of ROMs but:
If I install AOSP based I get a "Failed" error and a note to say that the ROM is not the correct one for the device - it seems to get my device wrong too?!
If I install a Touchwiz ROM such as NoteX it appears to flash OK but it just keeps bootlooping upon restart.
Any ideas? Could it be anything to do with the modem or bootloader? I'm currently on stock 5.0.1.
Any help greatly appreciated!
Cheers
Bugsie
Click to expand...
Click to collapse
which rom is Note x for 910F ??
or you meant Xnote ??
if yes Xnote then it will give you bootloop as thats based on kitkat and your on lollipop
try some roms based on lollipop
Er. Aditya said:
which rom is Note x for 910F ??
or you meant Xnote ??
if yes Xnote then it will give you bootloop as thats based on kitkat and your on lollipop
try some roms based on lollipop
Click to expand...
Click to collapse
Hi, thanks for the quick response.
I did mean X-note. I have tried a number of other ROMs too, Aliance - Emotion Revolution.
Right now I tried flashing a new bootloader/modem as per this ROM "http://forum.xda-developers.com/note-4/snapdragon-dev/rom-robomix-t3069298" but now I'm stuck in a complete bootloop!!
I think I need to get the correct bootloader and/or modem - I just don't have a clue why or what is what. I an't find any guides!
bugsie857 said:
Hi, thanks for the quick response.
I did mean X-note. I have tried a number of other ROMs too, Aliance - Emotion Revolution.
Right now I tried flashing a new bootloader/modem as per this ROM "http://forum.xda-developers.com/note-4/snapdragon-dev/rom-robomix-t3069298" but now I'm stuck in a complete bootloop!!
I think I need to get the correct bootloader and/or modem - I just don't have a clue why or what is what. I an't find any guides!
Click to expand...
Click to collapse
you took the booloader from the rom op and flash it ? either first or later flashing the rom zip ?
Hello,
I tried flashing my n910g with "Dr.Ketan ROM I N5 Port I Full Theme store support I S6 Edge features L12" ROM.
After flashing, I also flashed the bootloader and modem mentioned by Dr.Ketan. The phone is stuck at the bootscreen with an error seandroid.
RECOVERY BOOTING Recovery is NOT SEANDROID ENFORCING Set Warrenty Bit. I used cwm recovery before flashing my ROM and my phone was already rooted with cf autoroot before flashing this rom.
I wanted to try this rom in my phone and I'm a noob. Can somebody please help me with this ? It'd be a great favor.
I'm a noob, please help me with the appropriate files/instructions so that I can start using my phone. As of now, my phone is still stuck at the boot screen with that error.
Download Stock firmware from sammobile for your phone and flash it with ODIN.
dork997 said:
Download Stock firmware from sammobile for your phone and flash it with ODIN.
Click to expand...
Click to collapse
Does it mean I would not be able to use the N5 port rom?
I see many people using this rom for N910G in India. I've shared much detailed info about my issue. Somebody please help.
Funny Sykes said:
I see many people using this rom for N910G in India. I've shared much detailed info about my issue. Somebody please help.
Click to expand...
Click to collapse
i have no idea about note 5 port as i have never used it.
dork997 said:
i have no idea about note 5 port as i have never used it.
Click to expand...
Click to collapse
Alright, now that my n910g is stuck with that I tried installing some nameless rom and the screen doesn't really work. I need to use Spen always even to click on the dial button.
Can you suggest any good rom for Note 4 N910g?
I really need to give my phone a fresh start as this will be my first time to flash my phone.
Please help!!
Listen, Dr. Ketan's note 5 port L12 with S6 edge features is based on android 5.1.1 Australian "COH4" baseband version. So first download and install that stock firmware having COH4 baseband version using odin. Here's the link for that: www.sammobile.com/firmwares/download/56424/N910GDTU1COH4_N910GXSA1COH4_XSA/
And after installing this, root your phone, then install CWM recovery and install dr. Ketan's L12 version rom which you have downloaded. Your phone will work fine after that.
Baseband version of your phone plays a very important role in determining which rom you can install on your phone. For example if u liked and downloaded a samsung stock modified custom rom that has baseband version say "PQR" and suppose if your phone has baseband version "XYZ" then you cannot install that rom on your phone. To install that rom you will first need to flash the stock rom of PQR baseband version in Odin. To check which baseband version your phone is running, go to (settings >> about phone/device >> baseband version). Look at the last 3 or 4 alphabets.
Shane_Picardo said:
Listen, Dr. Ketan's note 5 port L12 with S6 edge features is based on android 5.1.1 Australian "COH4" baseband version. So first download and install that stock firmware having COH4 baseband version using odin. Here's the link for that: www.sammobile.com/firmwares/download/56424/N910GDTU1COH4_N910GXSA1COH4_XSA/
And after installing this, root your phone, then install CWM recovery and install dr. Ketan's L12 version rom which you have downloaded. Your phone will work fine after that.
Baseband version of your phone plays a very important role in determining which rom you can install on your phone. For example if u liked and downloaded a samsung stock modified custom rom that has baseband version say "PQR" and suppose if your phone has baseband version "XYZ" then you cannot install that rom on your phone. To install that rom you will first need to flash the stock rom of PQR baseband version in Odin. To check which baseband version your phone is running, go to (settings >> about phone/device >> baseband version). Look at the last 3 or 4 alphabets.
Click to expand...
Click to collapse
Alright, downloading the stock firmware and then will try flashing it with the kd.Ketan's L12 rom. I hope it works.
Funny Sykes said:
Alright, downloading the stock firmware and then will try flashing it with the kd.Ketan's L12 rom. I hope it works.
Click to expand...
Click to collapse
downloaded the mentioned stock rom and then tried flashing the dr.ketan rom.
It always kept saying android media stopped working and when i click ok, again the same pop up and nothing works.
No icons are displayed but the edge+ feature was showing.
What is the best way to have this rom ?
Funny Sykes said:
Alright, downloading the stock firmware and then will try flashing it with the kd.Ketan's L12 rom. I hope it works.
Click to expand...
Click to collapse
Did you try my method? Did it work?
Used coh4 baseband which you said. But could not find the proper root file. Please help with the root and cwm files for 910g which work. Then i will try flashing dr.ketan rom
Yes I tried, now I am using the same baseband you have mentioned which is Australian, now the touch doesn't work well but with s pen it works fine. What to do ?>
Shane_Picardo said:
Did you try my method? Did it work?
Click to expand...
Click to collapse
"Shane_Picard"
Downloaded the stock from from sammobile and my phone was able to boot successfully. But the problem is that ever since, I tried flashing twrp recovery to flash dr.ketan rom which did not work. My phone's touch is really not working well. I have enabled touches in developer options and confirm that my s-pen works fine but when I touch the phone, it gets detected 1 cm below where I actually touch. This problem might have been created when I flashed twrp recovery because that was the first time I saw this issue.
Please help how to fix this ?
Hello,
I have a N9005 that I'm tryin to install a custom ROM (I have another one already with Norma v29 working perfectly). In this one I flashed the original 5.0 firware and then tried to root, isntall custom recover, custom rom, etc., as I normally do. With this phone I can root and install custom recovery but every custom ROM i tried I always have a bootloop on Galaxy Note 3 screen (tried Norma, Phonesis, etc.).
I can reflash to an original ROM but don't understand why it doesn't work with a custom ROM.
Can any one help me? I even tried to change bootloader on a specfific tutorial for Norma v29.
Thank you in advance!
Boot to download mode and check the model first .
Is this a used phone ??
Hello. Yes is a used phone. The model is a SM-9005. The roms I'm using are for this model. I tried again a Lolipop 5.0 stock rom, then root, then recovery (until here everything works). Then applied Norma V29 and i'm stuck again at the Galaxy Note 3 screen, the blue led starts to blink and then the phone restarts. Really can't understand. Even tried the same memory card from my Note. Well the only difference is that one is 16GB and this one is 32GB. Any stock rom work perfectly but didn't want to use them.
Can it be that the internal memory size is causing the issue? is the only difference....can someone help?
Well my original phone is a 32GB. Don't know why the hell I was thinking 16GB... so most weired. If someone could help will be great. It's working with the stock 5.0 and rooted with CM-AUTO.
before flashing custom firmware you should enter the recovey and make complete format for both cache and data partitions.
after the firmware install it might take the system up to 10 minutes to boot.
Thank you for the answer. i'm doing all the steps (I changed roms on Note 3 for some time now). This one startups on the Galaxy Note 3 Screen, the led starts to blink (like 4-5 times) and restarts himself. So is not waiting time. made factory resets, all the wipes, even a script I found for fixing EFS. When I flash a Android 4.4 or 5.0 stock from SamMobile just works.
hi note 3 users
I'm new here i trying to install twrp in my n9005 odin give me pass the flashing but when my phone restart i press power + volume up + home button my phone go to stock recovery im try also with philz but same result can somebody help me
** when i download twrp give me 2 choice... American OR Europe what the correct version for my n9005 im leaving in Saudi Arabia
and i use the original cable usb 3 or i can use the normal Samsung usb cable
THANKS
adel alsayed said:
hi note 3 users
I'm new here i trying to install twrp in my n9005 odin give me pass the flashing but when my phone restart i press power + volume up + home button my phone go to stock recovery im try also with philz but same result can somebody help me
** when i download twrp give me 2 choice... American OR Europe what the correct version for my n9005 im leaving in Saudi Arabia
and i use the original cable usb 3 or i can use the normal Samsung usb cable
THANKS
Click to expand...
Click to collapse
hala adel, recheck the twrp version you downloaded is for 9005? check the md5 of your download..
9005 is the international version so its europe, US phones are different..
hope it helps, I can't think of anything else.. read in twrp for note 3 thread also
Dan0v said:
hala adel, recheck the twrp version you downloaded is for 9005? check the md5 of your download..
9005 is the international version so its europe, US phones are different..
hope it helps, I can't think of anything else.. read in twrp for note 3 thread also
Click to expand...
Click to collapse
twrp is ok but i cant install nt ux 9.7 rom by twrp give me faild ... pleas hellllllp
adel alsayed said:
twrp is ok but i cant install nt ux 9.7 rom by twrp give me faild ... pleas hellllllp
Click to expand...
Click to collapse
Suggests you are using the wrong TWRP version .
Read the roms instructions/ search thread .
use TWRP version 2.8.7.0.
Most custom roms do not support v 3.x.x.x
golalmo said:
use TWRP version 2.8.7.0.
Most custom roms do not support v 3.x.x.x
Click to expand...
Click to collapse
i use it already but given faild my phone is n90005 32 gb I don't know what can I do for install ux 9.7 rom
Does any other rom install ??
JJEgan said:
Does any other rom install ??
Click to expand...
Click to collapse
Yes i can install ... Phronesis Rom as a normal install only facing faild and zip corrupt in UX9.7 ROM
adel alsayed said:
Yes i can install ... Phronesis Rom as a normal install only facing faild and zip corrupt in UX9.7 ROM
Click to expand...
Click to collapse
then check the md5 of magma nx9.7..!
read the how to install in tge magma rom.. sometimes something small will interrupt the flashing
fabio.teles said:
Hello,
I have a N9005...
Click to expand...
Click to collapse
I thought I'd clean up the phone.
I installed via ODIN official fw = Lollipop.
Then root + TWRP 3.1.1.
Next installing custom rom RR 7.1.
ERROR
I resolved as follows:
Installing "CP_N9005XXUGBPB1_MODEM.tar" + "BL_N9005XXUGBPB2_BOOTLOADER.tar"
Now RR installation is successful!
But "not SIM" (can not enter PIN)
Solution:
Override file "libsec-ril.so". Here is: Root / System / lib / libsec-ril.so
Done - it works!
Files here: https://ulozto.cz/!M6PZA7EKQHNe/xda-zip
It helped me. Will it help you too?
*******
Thanks @"Anon_Help_You" !!!
(https://forum.xda-developers.com/galaxy-note-3/help/solution-lineage-os-sim-t3640689)
Hello,
I have recently replaced the motherboard on my N910C with N910F (because it was the only one that I could find at that moment). I had to replace the camera as well because they are not compatible. I got my motherboard from Aliexpress, and it seems to be working fine. It came with some preinstalled software that was running Android 5.0.1. on PHE CSC which seems to be Spanish software. I flashed the latest Marshmallow 6.0.1. from Sammobile and its working great. But I wanted to flash Astra Dream UX ROM v.40F so I rooted the device, flashed TWRP and put the ROM on SD card, wiped everyhting (I have flashed roms before on my S4) and after successful installation, what happens is that phone constantly reboots after Samsung splash screen. It managed to get to boot animation first time after flashing, but after that, any Custom ROM that I flash installs without issues, but doesn't go further than Splash screen logo. I have tried 3 or 4 TWRP versions, but none of them seems to fix the issue. So I reflashed stock ROM using Odin and now its working fine. Any suggestion what might be the issue?
Mirsaneli said:
Hello,
I have recently replaced the motherboard on my N910C with N910F (because it was the only one that I could find at that moment). I had to replace the camera as well because they are not compatible. I got my motherboard from Aliexpress, and it seems to be working fine. It came with some preinstalled software that was running Android 5.0.1. on PHE CSC which seems to be Spanish software. I flashed the latest Marshmallow 6.0.1. from Sammobile and its working great. But I wanted to flash Astra Dream UX ROM v.40F so I rooted the device, flashed TWRP and put the ROM on SD card, wiped everyhting (I have flashed roms before on my S4) and after successful installation, what happens is that phone constantly reboots after Samsung splash screen. It managed to get to boot animation first time after flashing, but after that, any Custom ROM that I flash installs without issues, but doesn't go further than Splash screen logo. I have tried 3 or 4 TWRP versions, but none of them seems to fix the issue. So I reflashed stock ROM using Odin and now its working fine. Any suggestion what might be the issue?
Click to expand...
Click to collapse
For some reason v4 of that rom won't boot for anyone without having to flash another kernel. Also, I've heard that dirty flashing over v3 works too, but I did the kernel change when I used it.
But I also flashed Nemesis N7 port v3.0 and Aurora Note 5 port v7.0, none of them booted. I used kernels provided with the ROMs.
As said previous, try to flash another kernel after flashing the ROM. You have ramkernel or flashpoint that I know of for custom ported roms.
Isaac_T said:
As said previous, try to flash another kernel after flashing the ROM. You have ramkernel or flashpoint that I know of for custom ported roms.
Click to expand...
Click to collapse
Thanks, I will try.