Database Users

N910g unresponsive after flashing Dr.Ketan ROM I N5 Port seandroid error

Hello,
I tried flashing my n910g with "Dr.Ketan ROM I N5 Port I Full Theme store support I S6 Edge features L12" ROM.
After flashing, I also flashed the bootloader and modem mentioned by Dr.Ketan. The phone is stuck at the bootscreen with an error seandroid.
RECOVERY BOOTING Recovery is NOT SEANDROID ENFORCING Set Warrenty Bit. I used cwm recovery before flashing my ROM and my phone was already rooted with cf autoroot before flashing this rom.
I wanted to try this rom in my phone and I'm a noob. Can somebody please help me with this ? It'd be a great favor.
I'm a noob, please help me with the appropriate files/instructions so that I can start using my phone. As of now, my phone is still stuck at the boot screen with that error.

Download Stock firmware from sammobile for your phone and flash it with ODIN.

dork997 said:
Download Stock firmware from sammobile for your phone and flash it with ODIN.
Click to expand...
Click to collapse
Does it mean I would not be able to use the N5 port rom?

I see many people using this rom for N910G in India. I've shared much detailed info about my issue. Somebody please help.

Funny Sykes said:
I see many people using this rom for N910G in India. I've shared much detailed info about my issue. Somebody please help.
Click to expand...
Click to collapse
i have no idea about note 5 port as i have never used it.

dork997 said:
i have no idea about note 5 port as i have never used it.
Click to expand...
Click to collapse
Alright, now that my n910g is stuck with that I tried installing some nameless rom and the screen doesn't really work. I need to use Spen always even to click on the dial button.
Can you suggest any good rom for Note 4 N910g?
I really need to give my phone a fresh start as this will be my first time to flash my phone.
Please help!!

Listen, Dr. Ketan's note 5 port L12 with S6 edge features is based on android 5.1.1 Australian "COH4" baseband version. So first download and install that stock firmware having COH4 baseband version using odin. Here's the link for that: www.sammobile.com/firmwares/download/56424/N910GDTU1COH4_N910GXSA1COH4_XSA/
And after installing this, root your phone, then install CWM recovery and install dr. Ketan's L12 version rom which you have downloaded. Your phone will work fine after that.
Baseband version of your phone plays a very important role in determining which rom you can install on your phone. For example if u liked and downloaded a samsung stock modified custom rom that has baseband version say "PQR" and suppose if your phone has baseband version "XYZ" then you cannot install that rom on your phone. To install that rom you will first need to flash the stock rom of PQR baseband version in Odin. To check which baseband version your phone is running, go to (settings >> about phone/device >> baseband version). Look at the last 3 or 4 alphabets.

Shane_Picardo said:
Listen, Dr. Ketan's note 5 port L12 with S6 edge features is based on android 5.1.1 Australian "COH4" baseband version. So first download and install that stock firmware having COH4 baseband version using odin. Here's the link for that: www.sammobile.com/firmwares/download/56424/N910GDTU1COH4_N910GXSA1COH4_XSA/
And after installing this, root your phone, then install CWM recovery and install dr. Ketan's L12 version rom which you have downloaded. Your phone will work fine after that.
Baseband version of your phone plays a very important role in determining which rom you can install on your phone. For example if u liked and downloaded a samsung stock modified custom rom that has baseband version say "PQR" and suppose if your phone has baseband version "XYZ" then you cannot install that rom on your phone. To install that rom you will first need to flash the stock rom of PQR baseband version in Odin. To check which baseband version your phone is running, go to (settings >> about phone/device >> baseband version). Look at the last 3 or 4 alphabets.
Click to expand...
Click to collapse
Alright, downloading the stock firmware and then will try flashing it with the kd.Ketan's L12 rom. I hope it works.

Funny Sykes said:
Alright, downloading the stock firmware and then will try flashing it with the kd.Ketan's L12 rom. I hope it works.
Click to expand...
Click to collapse
downloaded the mentioned stock rom and then tried flashing the dr.ketan rom.
It always kept saying android media stopped working and when i click ok, again the same pop up and nothing works.
No icons are displayed but the edge+ feature was showing.
What is the best way to have this rom ?

Funny Sykes said:
Alright, downloading the stock firmware and then will try flashing it with the kd.Ketan's L12 rom. I hope it works.
Click to expand...
Click to collapse
Did you try my method? Did it work?

Used coh4 baseband which you said. But could not find the proper root file. Please help with the root and cwm files for 910g which work. Then i will try flashing dr.ketan rom

Yes I tried, now I am using the same baseband you have mentioned which is Australian, now the touch doesn't work well but with s pen it works fine. What to do ?>

Shane_Picardo said:
Did you try my method? Did it work?
Click to expand...
Click to collapse
"Shane_Picard"
Downloaded the stock from from sammobile and my phone was able to boot successfully. But the problem is that ever since, I tried flashing twrp recovery to flash dr.ketan rom which did not work. My phone's touch is really not working well. I have enabled touches in developer options and confirm that my s-pen works fine but when I touch the phone, it gets detected 1 cm below where I actually touch. This problem might have been created when I flashed twrp recovery because that was the first time I saw this issue.
Please help how to fix this ?

After 6.0.1 update, cant flash any customs roms at all. Only stock works.

Hi,
Wonder if anyone has come across this issue before. While Galaxy S5 (SM-G900F) BTU was on Lollipop, I could flash what ever custom roms I wanted. However since updating to MarshMallow 6.0.1, any custom rom I install results in constant resets on boot.
So instead of boot looping its reset looping. I can see for some reason it will not create Cache / Dalvik Cache mounts, maybe that has something to do with it, I dont know. I know I have spent hours trying to work out issue.

because of bootloader/cp. you have to flash lollipop ones if you want to intall any branch of cm. cm13 will work with MM bl/cp eventually

oia12344321 said:
because of bootloader/cp. you have to flash lollipop ones if you want to intall any branch of cm. cm13 will work with MM bl/cp eventually
Click to expand...
Click to collapse
Hi,
I think I tried going back, will give it another. Any BL / CP you recommend?

for me it worked (be sure to check update bootlader in odin). i used the latest one for lollipop from Alexander thread.

oia12344321 said:
for me it worked (be sure to check update bootlader in odin). i used the latest one for lollipop from Alexander thread.
Click to expand...
Click to collapse
I was searching and searching without answer. Now works, .
Every time I searched for anything with reset in it, it kept giving me bootloop threads, .

Touchscreen not working with TWRP, Cyano 12, 13, MIUI, SlimRom, Omega

Hello guys!
I've been trying for a week to install an alternative rom on my 9515L, but I'm not getting through these issues with touch screen ..
Touch works normally on official rom, but only in it
Firstly, I installed TWRP by odin, the touch did not work on it, if installed by the app it displayed the error:
Something went wrong
Flashing recovery was unsuccessful.
Either you already have this recovery
installed or another error has
occured.Would you like to attempt
rebooting to recovery now?
Click to expand...
Click to collapse
So I installed clockwordmod, which worked normally
But if I chose the reboot system function, it showed something like:
Root Access Possibly Lost Fix
fix root (/system/xbin/su)
I thought it might be some problem with root, so I upgraded SuperSu and the error continued
I installed by CWM Cyano 12,13, MIUI, SlimRom, Omega (which is based on a samsung rom), and none of them worked the touch
So I thought it might be a problem with the driver, if I type *#2663# in the official lollipop rom it displays:
Firmware version
...
Phone's Touch Key FW version: 0x12
Part's Touch Key FW version: 0x12
Click to expand...
Click to collapse
So I decided to try to install a previous version of the driver and for this I installed the official rom of kitkat, in it the driver went to version 0x10. And yet the problem continues
The Touch worked perfectly on this kitkat rom. I noticed that it works only in official roms.
Could you give me a hint of what I could do?
Sorry for bad English.

Are you sure you installed ROMs for the GT-I9515?
The only reason why the touch wouldn't work is that the ROMs and TWRP you installed are for a different model.
And I assume the GT-I9515L and GT-I9515 are the same hardware-wise.

Pwnycorn said:
Are you sure you installed ROMs for the GT-I9515?
The only reason why the touch wouldn't work is that the ROMs and TWRP you installed are for a different model.
And I assume the GT-I9515L and GT-I9515 are the same hardware-wise.
Click to expand...
Click to collapse
Actually, I was installing everything for 9505, I found a version of RR for 9515 and it worked very well .. I finally managed to remove that horrible samsung rom, thank you very much!

You could safely use i9505 ROMs with kernel patch. Search on general subforum.
Sent from my ASUS_Z00A using XDA Labs

Uncommon behavior when flashing custom ROM - Please help :)

First of all hello to everyone!
I have quite weird problem:
I have my phone rooted and customized since day one - Installed KitKat, tried some launchers, unlocked UPSM and so on.
It ran flawlessly for nearly 4 years.
Recently, for no particular reason I decided to wipe&refresh it and maybe install some totally custom ROM.
NOW: I can install ROMS like Lineage 14.1, 15.1 or Resurrection Remix 6.0 and they run fine except (yes, You probably guessed it) they mess up baseband and IMEI.
I can still revert to original 4.4.2 stock ROM and both baseband and IMEI work fine so i'm not in any "brick panic"
The point is I still want to move to some custom ROM but can't sort out baseband-modem and IMEI problem.
I tried to flash several different modems to no avail - sometimes (totally randomly) IMEI showed up on first boot after flashing but was gone after reboot.
- On my current 4.4.2 stock, IMEI shows up correctly NO MATTER which modem version I flash (is it weird or normal or what?)
- none of modem versions work on Lineage OS nor RR
- SIM card works flawlessly on all other devices and on my current 4.4.2 ROM so it's not damaged.
Is it matter of proper custom ROM+MODEM combination or something else?
Can anyone help to sort it out?
What more information do You need?
Thanks in advance!

Flash the latest lollipop stock firmware to update your bootloader.

Yeah, meanwhile I did flash lollipop an hour ago and it works fine with IMEI and all.
Latest version I could find for my phone was Lollipop 5.0
How can I tell if bootloader is updated?
Can I Flash sole bootloader independently via Odin?

Mikuda said:
Yeah, meanwhile I did flash lollipop an hour ago and it works fine with IMEI and all.
Latest version I could find for my phone was Lollipop 5.0
How can I tell if bootloader is updated?
Can I Flash sole bootloader independently via Odin?
Click to expand...
Click to collapse
Yes you can. Go to this thread https://forum.xda-developers.com/galaxy-note-3/general/bootloader-baseband-bl-cp-samsung-t3582504

Thank You all for help and pointing to right direction!
Taking care of proper bootloader version was the key step that sorted things out.
Now I'm enjoying superlite bloatware free 8.1 oreo with LineageOS 15.1 on great 4 yrs old device.
And it works super smooth. Way better then original 4.4.2.
Now I'm being tempted to push the limits and try 9.0 Pie with LOS 16...

Whenever flashing a stock ROM with Odin, the stock ROM includes a bootloader and modem file.

N910U Sim Not Working On Custom Rom

I have a galaxy note 4 exynos n910u (treltexx) with stock rom (6.0) everything works fine so i decided to install custom rom. First it was hard to find the rom for it after i found few i flashed one.
RR with twrp 3.3 after flashing phone was working like usual but when i interted the sim card it did not detect it so i tought it might be the rom what causing it then i flashed the stock with odin and sim was working fine so i flashed lineage same issue again evwn then i tought it was rom but no matter rom i try sim was not getting detected (exept stock) .
Thing i notice was there was no imei number after dialing *#06#*
So i found the new rom Note 7FE edition android 7 i gave it a try same thing no sim detected but this time i was getting IMEI number
Also my phone is N910U and showed Spark nz logo at boot and i'm in india but sim works fine on stock get 4g and everything and also when i install any rom it say N910C ony Note 7FE edition one said N910U
Is there any way to fix this issue
Any help will be appreciated
Thanks in advance

Honeys559 said:
I have a galaxy note 4 exynos n910u (treltexx) with stock rom (6.0) everything works fine so i decided to install custom rom. First it was hard to find the rom for it after i found few i flashed one.
RR with twrp 3.3 after flashing phone was working like usual but when i interted the sim card it did not detect it so i tought it might be the rom what causing it then i flashed the stock with odin and sim was working fine so i flashed lineage same issue again evwn then i tought it was rom but no matter rom i try sim was not getting detected (exept stock) .
Thing i notice was there was no imei number after dialing *#06#*
So i found the new rom Note 7FE edition android 7 i gave it a try same thing no sim detected but this time i was getting IMEI number
Also my phone is N910U and showed Spark nz logo at boot and i'm in india but sim works fine on stock get 4g and everything and also when i install any rom it say N910C ony Note 7FE edition one said N910U
Is there any way to fix this issue
Any help will be appreciated
Thanks in advance
Click to expand...
Click to collapse
I wrote to you on the telegram channel also - the 910U has a weird modem (Intel) which has issues with the RIL (radio layer interface).
Also the developer has no phone note 4 910U so that he can test it and get logs to see errors.
As for all the peeps with this model - "It is what it is" - deal with it.

Honeys559 said:
I have a galaxy note 4 exynos n910u (treltexx) with stock rom (6.0) everything works fine so i decided to install custom rom. First it was hard to find the rom for it after i found few i flashed one.
RR with twrp 3.3 after flashing phone was working like usual but when i interted the sim card it did not detect it so i tought it might be the rom what causing it then i flashed the stock with odin and sim was working fine so i flashed lineage same issue again evwn then i tought it was rom but no matter rom i try sim was not getting detected (exept stock) .
Thing i notice was there was no imei number after dialing *#06#*
So i found the new rom Note 7FE edition android 7 i gave it a try same thing no sim detected but this time i was getting IMEI number
Also my phone is N910U and showed Spark nz logo at boot and i'm in india but sim works fine on stock get 4g and everything and also when i install any rom it say N910C ony Note 7FE edition one said N910U
Is there any way to fix this issue
Any help will be appreciated
Thanks in advance
Click to expand...
Click to collapse
I'm not sure if this will work but you have a backup of your stock roms modem partition you could yry dirty flashing it to your custom rom. You could also use a root file manager and copy your stock roms csc files and place the in a flashable .zip and dirty flash that to your custom rom.

Mr. JAVI said:
I'm not sure if this will work but you have a backup of your stock roms modem partition you could yry dirty flashing it to your custom rom. You could also use a root file manager and copy your stock roms csc files and place the in a flashable .zip and dirty flash that to your custom rom.
Click to expand...
Click to collapse
I will try it and report back if it work.

GRX Touchwis V8 for stock roms.
https://www.google.com/amp/s/apkqui...chwiz-mod-v8-apk-for-any-samsung-android/amp/

Mr. JAVI said:
GRX Touchwis V8 for stock roms.
https://www.google.com/amp/s/apkqui...chwiz-mod-v8-apk-for-any-samsung-android/amp/
Click to expand...
Click to collapse
Wrong. Only custom rom with root access.

w41ru5 said:
Wrong. Only custom rom with root access.
Click to expand...
Click to collapse
Opps , I mean rooted stock roms. I've noticed conflicts with custom roms if the rom manager has the same settings as GRX.

n910u is trhplte

Mr. JAVI said:
I'm not sure if this will work but you have a backup of your stock roms modem partition you could yry dirty flashing it to your custom rom. You could also use a root file manager and copy your stock roms csc files and place the in a flashable .zip and dirty flash that to your custom rom.
Click to expand...
Click to collapse
I gave it a try it didn't work .
Thanks for the effort though..

Honeys559 said:
I gave it a try it didn't work .8
Thanks for the effort though..
Click to expand...
Click to collapse
Your welcome, I was hoping it would have worked
Did you try creating a .zip with your working csc's and flash that in twrp as well?

Mr. JAVI said:
Your welcome, I was hoping it would have worked
Did you try creating a .zip with your working csc's and flash that in twrp as well?
Click to expand...
Click to collapse
Yes i did that too. Didn't work as well.