Critical Error Help(LG G2) - G2 Q&A, Help & Troubleshooting

I can not install TWRP.
It turns out the error.
What's the solution?
Please help me!!
http://img11.hostingpics.net/pics/90378665lg.jpg

Can70 said:
I can not install TWRP.
It turns out the error.
What's the solution?
Please help me!!
http://img11.hostingpics.net/pics/90378665lg.jpg
Click to expand...
Click to collapse
can you enter in download mode? you could try to flash stock kdz or tot, there are lots of guides about this.
EDIT: link with a tutorial: http://forum.xda-developers.com/showthread.php?t=2432476

lenesul said:
can you enter in download mode? you could try to flash stock kdz or tot, there are lots of guides about this.
EDIT: link with a tutorial: http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
Opening my phone.
twrp simply installing a "critical error" getting.
I have to install twrp for Rom.
I need to pass this error.
Can you help.

Can70 said:
Opening my phone.
twrp simply installing a "critical error" getting.
I have to install twrp for Rom.
I need to pass this error.
Can you help.
Click to expand...
Click to collapse
press Volume UP and send another photo with phone's screen

lenesul said:
press Volume UP and send another photo with phone's screen
Click to expand...
Click to collapse
volume+up =Download mode comes. without any problems. I can set up "Kdz"
But. When I install twrp example (twrp 2.8.7.3), then comes the error.
When I open recovery mode "critical error".

Can70 said:
volume+up =Download mode comes. without any problems. I can set up "Kdz"
But. When I install twrp example (twrp 2.8.7.3), then comes the error.
When I open recovery mode "critical error".
Click to expand...
Click to collapse
how did you rooted and installed recovery? and what android version?

lenesul said:
how did you rooted and installed recovery? and what android version?
Click to expand...
Click to collapse
Yes rooted.
5.0.2 (v30f spain) version.
Recovery is not installed. I get an error message when installing the recovery.(critical error)

Can70 said:
Yes rooted.
5.0.2 (v30f spain) version.
Recovery is not installed. I get an error message when installing the recovery.(critical error)
Click to expand...
Click to collapse
Method 1:
Have you tried AutoRec Lollipop from playstore?
Method 2:
you could flash stock kdz again, then use this http://forum.xda-developers.com/lg-g2/development-d802/tools-how-to-install-twrp-bump-d80230a-t3072186

lenesul said:
Method 1:
Have you tried AutoRec Lollipop from playstore?
Method 2:
you could flash stock kdz again, then use this http://forum.xda-developers.com/lg-g2/development-d802/tools-how-to-install-twrp-bump-d80230a-t3072186
Click to expand...
Click to collapse
Problem solved.
I installed 4.4.2 KK stock kdz. I then installed the recovery.
No problem.
Thank you for your help.

Related

[Q] Instaling Recovery

I have a rooted D802 and I wanted to install recovery. I'd surf and search and tried a few solutions but without success. Everytime It stuck on boot and black screen with some error message about bootloader. I've tried TWRP and Philz, nothing. I have KK D80220B_00 (A6HUBK).
How can I install custom recovery?
sidzim said:
I have a rooted D802 and I wanted to install recovery. I'd surf and search and tried a few solutions but without success. Everytime It stuck on boot and black screen with some error message about bootloader. I've tried TWRP and Philz, nothing. I have KK D80220B_00 (A6HUBK).
How can I install custom recovery?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2715496
This tool downgrade KK bootloader and install patched kernel because KK bootloader can't be lokifiable and KK kernel can't boot on JB bootloader. And that's why you couldn't install a recovery.
6ril1 said:
http://forum.xda-developers.com/showthread.php?t=2715496
This tool downgrade KK bootloader and install patched kernel because KK bootloader can't be lokifiable and KK kernel can't boot on JB bootloader. And that's why you couldn't install a recovery.
Click to expand...
Click to collapse
Had the same pb. Ended up using autorec app.
I will advise to read the thread first. Some people experienced issue while doing it. I didn't, what I did is I downloaded paranoid android and flashed as soon as I used the app.
I have a D803 but it should be similar.
mys1 said:
Had the same pb. Ended up using autorec app.
I will advise to read the thread first. Some people experienced issue while doing it. I didn't, what I did is I downloaded paranoid android and flashed as soon as I used the app.
I have a D803 but it should be similar.
Click to expand...
Click to collapse
Autorec was what i talked about and linked too : )
My bad! I will be honest, I haven't followed the link. Will do next time :thumbup:
Recovery
Thanks all, I'll try ...
mys1 said:
My bad! I will be honest, I haven't followed the link. Will do next time :thumbup:
Click to expand...
Click to collapse
And it's you who received the thank's....

Recovery will not boot, wrong recovery flashed?

The phone is/was a stock VS9803AA. I finally got root to work with using the One Click Root. Next I was working on installing TWRP. I flashed the TWRP image 2.8.5 from the link on this tutorial: http://forum.xda-developers.com/showthread.php?t=2449670. After doing that, when I try to reboot into recovery, a grey screen with a Critical Error is displayed. DemiGod Crash Handler : Critical Error! Press any key to choose Dload Mode or Reboot. Rebooting the phone lets it boot up normally, but at higher brightness levels the edges of the screen sort of flash, like a bad refresh rate on a monitor. I flashed the TWRP image using dd. Any ideas on how to fix it? I am trying to get TWRP on there so I can flash CM 12.1
Installed Flashify and used that to flash TWRP 2.8.6.0 and it has the same problem. I don't think the issue is the TWRP version used, must be something else?
Oxyacetylene said:
The phone is/was a stock VS9803AA. I finally got root to work with using the One Click Root. Next I was working on installing TWRP. I flashed the TWRP image 2.8.5 from the link on this tutorial: http://forum.xda-developers.com/showthread.php?t=2449670. After doing that, when I try to reboot into recovery, a grey screen with a Critical Error is displayed. DemiGod Crash Handler : Critical Error! Press any key to choose Dload Mode or Reboot. Rebooting the phone lets it boot up normally, but at higher brightness levels the edges of the screen sort of flash, like a bad refresh rate on a monitor. I flashed the TWRP image using dd. Any ideas on how to fix it? I am trying to get TWRP on there so I can flash CM 12.1
Click to expand...
Click to collapse
Hi!
I'm having the same problem. Can't get into recovery to install custom rom.
did you fix it?
Oxyacetylene said:
The phone is/was a stock VS9803AA. I finally got root to work with using the One Click Root. Next I was working on installing TWRP. I flashed the TWRP image 2.8.5 from the link on this tutorial: http://forum.xda-developers.com/showthread.php?t=2449670. After doing that, when I try to reboot into recovery, a grey screen with a Critical Error is displayed. DemiGod Crash Handler : Critical Error! Press any key to choose Dload Mode or Reboot. Rebooting the phone lets it boot up normally, but at higher brightness levels the edges of the screen sort of flash, like a bad refresh rate on a monitor. I flashed the TWRP image using dd. Any ideas on how to fix it? I am trying to get TWRP on there so I can flash CM 12.1
Click to expand...
Click to collapse
have a look at skr tools and see if it has an option.for your problem.. and the most easiest thing would be to go back to stock rom.. and start from there
raptorddd said:
have a look at skr tools and see if it has an option.for your problem.. and the most easiest thing would be to go back to stock rom.. and start from there
Click to expand...
Click to collapse
Can i flash stock VS98039a? I am currently on VS9803aa.
SkuLL. said:
Can i flash stock VS98039a? I am currently on VS9803aa.
Click to expand...
Click to collapse
I dont know what he numbers mean.? but what are they KITKAT or LP.?
raptorddd said:
I dont know what he numbers mean.? but what are they KITKAT or LP.?
Click to expand...
Click to collapse
Lollipop
SkuLL. said:
Lollipop
Click to expand...
Click to collapse
but i do not understand whats your point.? what do you want to do , need more info..
raptorddd said:
but i do not understand whats your point.? what do you want to do , need more info..
Click to expand...
Click to collapse
I am on software version VS9803aa, can i restore it to VS98039a? I am having problem installing TWRP on 3aa.
SkuLL. said:
I am on software version VS9803aa, can i restore it to VS98039a? I am having problem installing TWRP on 3aa.
Click to expand...
Click to collapse
am not familiar with those numbers.. but if its a stock rom.. yes.. if is flashable its ok its its thru flash tools .its okey so you may fix some rom problem installation..

LG G2 (Sprint) LS980ZVI, is this one rootable and stable ? i got security error

is this one flash able and stable, i have tried to use autorec to install recovery twrp, but i got security error and boot. also, i can even find the rom to restore it back ? any ideas ?
Rootable ? yes, you can use Kingroot it worked for me http://kingroot.fr.uptodown.com/android if this did not work try the PC version it will for sure.
is it stable ?, i cannot help on this.
kamel-kgb said:
Rootable ? yes, you can use Kingroot it worked for me http://kingroot.fr.uptodown.com/android if this did not work try the PC version it will for sure.
is it stable ?, i cannot help on this.
Click to expand...
Click to collapse
i used king root, but i tried install twrp and i get a security error now, where do i find stock rom for ls980zvi ?
droid3923 said:
is this one flash able and stable, i have tried to use autorec to install recovery twrp, but i got security error and boot. also, i can even find the rom to restore it back ? any ideas ?
Click to expand...
Click to collapse
You can try this guide regarding fail to install autorec by me : http://forum.xda-developers.com/verizon-g2/general/how-to-install-twrp-lg-g2-noob-friendly-t3396596
Its working on verizon variant but you it should work for sprint as well.
LMK how it went.
iubjaved said:
You can try this guide regarding fail to install autorec by me : http://forum.xda-developers.com/verizon-g2/general/how-to-install-twrp-lg-g2-noob-friendly-t3396596
Its working on verizon variant but you it should work for sprint as well.
LMK how it went.
Click to expand...
Click to collapse
i am stuck at boot screen, i get security error in a loop. but i can boot to twrp
droid3923 said:
i am stuck at boot screen, i get security error in a loop. but i can boot to twrp
Click to expand...
Click to collapse
Did you have a nandroid backup? If so, you can boot to twrp and restore. Or just go back to stock firmware.
iubjaved said:
Did you have a nandroid backup? If so, you can boot to twrp and restore. Or just go back to stock firmware.
Click to expand...
Click to collapse
thanks for helping, i just reinstalled the stock.

Huawei p10 lite system update while root

Hi, everyone!
Today i recived a system update, I press quick update but then twrp starts and when I reboot, a notification says "system update failed" (or somthing like this), how can I update?
topongo said:
Hi, everyone!
Today i recived a system update, I press quick update but then twrp starts and when I reboot, a notification says "system update failed" (or somthing like this), how can I update?
Click to expand...
Click to collapse
otas doesn't work with custom recovery installed, yes or yes you need sotck recovery, maybe you try with firmware finder.
Here is the stock recovery. Flash this, then U will be able to update. After that U can re-flash TWRP
https://drive.google.com/open?id=0B38rwPwR6EtKdDdDQTNrbW81Mk0
thank you very much, I will do this tomorrow
topongo said:
thank you very much, I will do this tomorrow
Click to expand...
Click to collapse
Better flash TWRP to erecovery, always)
topongo said:
thank you very much, I will do this tomorrow
Click to expand...
Click to collapse
Did it work for you?
Belgas14 said:
Did it work for you?
Click to expand...
Click to collapse
sorry, I was inactive for a while. Yes, it worked, I flashed with success and updated but when I tried to reflash twrp the terminal say "flash failed" "permission denied" or something. I tried to relock and unlock bootloader but nothing...
Hi everyone, recently I downloaded the latest update from huawei system updater and then I wanted to flash it with flashfire but when it restarts it says "check_write_data_to_partition,write data error" and "update_huawei_pkg_from_ota_zip: update package from zip failed" then it reboot normaly without system changes, what can I do?
edit:
in the head of the log it says olso:
"mountencrypt: failed to mount /data: success"
It's pretty ambiguous...
topongo said:
Hi everyone, recently I downloaded the latest update from huawei system updater and then I wanted to flash it with flashfire but when it restarts it says "check_write_data_to_partition,write data error" and "update_huawei_pkg_from_ota_zip: update package from zip failed" then it reboot normaly without system changes, what can I do?
edit:
in the head of the log it says olso:
"mountencrypt: failed to mount /data: success"
It's pretty ambiguous...
Click to expand...
Click to collapse
Unlocked bootloader, custom recovery?
nemanjsb said:
Unlocked bootloader, custom recovery?
Click to expand...
Click to collapse
yeah TWRP
topongo said:
yeah TWRP
Click to expand...
Click to collapse
With twrp u can't install update u need stock recovery. Try to boot in erecovery and press download last recovery and then reboot in recovery.
nemanjsb said:
With twrp u can't install update u need stock recovery. Try to boot in erecovery and press download last recovery and then reboot in recovery.
Click to expand...
Click to collapse
I'm trying to install update through flashfire and not twrp or system recovery
Armin.K said:
Here is the stock recovery. Flash this, then U will be able to update. After that U can re-flash TWRP
https://drive.google.com/open?id=0B38rwPwR6EtKdDdDQTNrbW81Mk0
Click to expand...
Click to collapse
Can we use twrp to flash the stock recovery or must your pc with ADB ?
nainaabd said:
Can we use twrp to flash the stock recovery or must your pc with ADB ?
Click to expand...
Click to collapse
I used my pc with "fastboot".
I don't think is possible to flash stock recovery from a custom recovery
topongo said:
I used my pc with "fastboot".
I don't think is possible to flash stock recovery from a custom recovery
Click to expand...
Click to collapse
Thank you .

Couldn't update Installation problem with august update

So this week i hadn't time enough to install the august update since my phone is rooted so i decided to do it now. What i did before trying to download the update :
1.Deleted all magisk modules that i had then rebooted
2.Unistalled magisk using restore image then rebooted
3.Went to sys update downloaded and it says installation failed
What do to? I'm not rooted now and i don't have twrp installed.
PS. don't want to install it via fastboot/miflash
Follow this guide in future. https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips
To fix your problem now, find a stock boot image for your update version you are currently on and flash it.
emiljano539 said:
PS. don't want to install it via fastboot/miflash
Click to expand...
Click to collapse
If you don't want to use Miflash (Why ?) you can boot temporary TWRP and flash .zip here:
https://forum.xda-developers.com/showpost.php?p=77353883&postcount=542
sipollo said:
If you don't want to use Miflash (Why ?) you can boot temporary TWRP and flash .zip here:
https://forum.xda-developers.com/showpost.php?p=77353883&postcount=542
Click to expand...
Click to collapse
Do i lose my data if i flash this via twrp?
Idk i don't really trust miflash
emiljano539 said:
Do i lose my data if i flash this via twrp?
Idk i don't really trust miflash
Click to expand...
Click to collapse
You won't lose your data.
ludditefornow said:
Follow this guide in future. https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips
To fix your problem now, find a stock boot image for your update version you are currently on and flash it.
Click to expand...
Click to collapse
flashed the stock boot image tried to install it but again it shows that error , i guess the only thing i can do is to flash it manually via fastboot/miflash
sipollo said:
You won't lose your data.
Click to expand...
Click to collapse
Okay thanks, do i have to remove the magisk and flash the stock boot.img or it doesn't matter?
emiljano539 said:
Okay thanks, do i have to remove the magisk and flash the stock boot.img or it doesn't matter?
Click to expand...
Click to collapse
It doesn't matter. You'll have to reinstall Magisk (if you want to).
sipollo said:
It doesn't matter. You'll have to reinstall Magisk (if you want to).
Click to expand...
Click to collapse
which one should i install from them because there are 2 tissot-T files ( for twrp)
"tissot-T-OPM1.171019.026.8.8.23.zip" or "tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip" ?
emiljano539 said:
which one should i install from them because there are 2 tissot-T files ( for twrp)
"tissot-T-OPM1.171019.026.8.8.23.zip" or "tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip" ?
Click to expand...
Click to collapse
tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip
The other file is the latest beta.
sipollo said:
tissot-T-OPM1.171019.026.V9.6.5.0.ODHMIFE.zip
The other file is the latest beta.
Click to expand...
Click to collapse
I installed the zip from twrp and now after reboot i am stucked in bootloop now i can't even boot into twrp. What to do?
After i flashed it in the end says:
Failed to mount /system Invalid argument
Which TWRP did you use?
sipollo said:
Which TWRP did you use?
Click to expand...
Click to collapse
the official one. what version should i use?
its funny now that i flashed the stock rom via mi flash tool and now again the installation shows error..
ludditefornow said:
Follow this guide in future. https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips
To fix your problem now, find a stock boot image for your update version you are currently on and flash it.
Click to expand...
Click to collapse
I'm facing same issue and I was following the guide.
Same here, can't install set Ota, even after remove magisk.
Other thing, cell won't show screen to put pin to boot, previous pin of sim so I think encryption is disable!? Any idea?

Categories

Resources