The phone is/was a stock VS9803AA. I finally got root to work with using the One Click Root. Next I was working on installing TWRP. I flashed the TWRP image 2.8.5 from the link on this tutorial: http://forum.xda-developers.com/showthread.php?t=2449670. After doing that, when I try to reboot into recovery, a grey screen with a Critical Error is displayed. DemiGod Crash Handler : Critical Error! Press any key to choose Dload Mode or Reboot. Rebooting the phone lets it boot up normally, but at higher brightness levels the edges of the screen sort of flash, like a bad refresh rate on a monitor. I flashed the TWRP image using dd. Any ideas on how to fix it? I am trying to get TWRP on there so I can flash CM 12.1
Installed Flashify and used that to flash TWRP 2.8.6.0 and it has the same problem. I don't think the issue is the TWRP version used, must be something else?
Oxyacetylene said:
The phone is/was a stock VS9803AA. I finally got root to work with using the One Click Root. Next I was working on installing TWRP. I flashed the TWRP image 2.8.5 from the link on this tutorial: http://forum.xda-developers.com/showthread.php?t=2449670. After doing that, when I try to reboot into recovery, a grey screen with a Critical Error is displayed. DemiGod Crash Handler : Critical Error! Press any key to choose Dload Mode or Reboot. Rebooting the phone lets it boot up normally, but at higher brightness levels the edges of the screen sort of flash, like a bad refresh rate on a monitor. I flashed the TWRP image using dd. Any ideas on how to fix it? I am trying to get TWRP on there so I can flash CM 12.1
Click to expand...
Click to collapse
Hi!
I'm having the same problem. Can't get into recovery to install custom rom.
did you fix it?
Oxyacetylene said:
The phone is/was a stock VS9803AA. I finally got root to work with using the One Click Root. Next I was working on installing TWRP. I flashed the TWRP image 2.8.5 from the link on this tutorial: http://forum.xda-developers.com/showthread.php?t=2449670. After doing that, when I try to reboot into recovery, a grey screen with a Critical Error is displayed. DemiGod Crash Handler : Critical Error! Press any key to choose Dload Mode or Reboot. Rebooting the phone lets it boot up normally, but at higher brightness levels the edges of the screen sort of flash, like a bad refresh rate on a monitor. I flashed the TWRP image using dd. Any ideas on how to fix it? I am trying to get TWRP on there so I can flash CM 12.1
Click to expand...
Click to collapse
have a look at skr tools and see if it has an option.for your problem.. and the most easiest thing would be to go back to stock rom.. and start from there
raptorddd said:
have a look at skr tools and see if it has an option.for your problem.. and the most easiest thing would be to go back to stock rom.. and start from there
Click to expand...
Click to collapse
Can i flash stock VS98039a? I am currently on VS9803aa.
SkuLL. said:
Can i flash stock VS98039a? I am currently on VS9803aa.
Click to expand...
Click to collapse
I dont know what he numbers mean.? but what are they KITKAT or LP.?
raptorddd said:
I dont know what he numbers mean.? but what are they KITKAT or LP.?
Click to expand...
Click to collapse
Lollipop
SkuLL. said:
Lollipop
Click to expand...
Click to collapse
but i do not understand whats your point.? what do you want to do , need more info..
raptorddd said:
but i do not understand whats your point.? what do you want to do , need more info..
Click to expand...
Click to collapse
I am on software version VS9803aa, can i restore it to VS98039a? I am having problem installing TWRP on 3aa.
SkuLL. said:
I am on software version VS9803aa, can i restore it to VS98039a? I am having problem installing TWRP on 3aa.
Click to expand...
Click to collapse
am not familiar with those numbers.. but if its a stock rom.. yes.. if is flashable its ok its its thru flash tools .its okey so you may fix some rom problem installation..
Related
After attempt at installing software update to Nexus 10 tablet will not boot. Have wiped Cache and even then did a factory reset. Nothing. Google appears and then twirling colorful dots and nothing. For hours just twirling dots., Samsung and Google and Best Buy geeks says nothing they can do. No longer under warranty but very upset since tablet was working great until update. I am not very tech savvy but can anyone help or do I just have a new paperweight? Thanks for any advice.
I have not made any modifications to the tablet.
Just flash the newest factory image. Get it and the instructions to flash it from here:
https://developers.google.com/android/nexus/images
yes flash the newest image
After getting a notification of the latest update I went and rebooted for the update to install but it went to the twrp recovery and nothing happens, is there a way to install the update?
VivaErBetis said:
Just flash the newest factory image. Get it and the instructions to flash it from here:
https://developers.google.com/android/nexus/images
Click to expand...
Click to collapse
Gibbothegreat said:
After getting a notification of the latest update I went and rebooted for the update to install but it went to the twrp recovery and nothing happens, is there a way to install the update?
Click to expand...
Click to collapse
Still having proble? what is your recovery ? stock? did you update the bootloader? depending on your answer I should be able to help you out, thx
Khaon said:
Still having proble? what is your recovery ? stock? did you update the bootloader? depending on your answer I should be able to help you out, thx
Click to expand...
Click to collapse
Hi Khaon, I have stock lollipop version 5.1.1 . (LMY47V) and latest twrp version. When upgrading it restarts and goes to recoverys main screen.
BTW how can I check which version my bootloader is?
same problem
VivaErBetis said:
Just flash the newest factory image. Get it and the instructions to flash it from here:
as a newbie .I'm not allowed to reference your link !!
I rooted my nexus 10 using xda instructions., installed CWM. All good. I tried backup and recovery and screwed something up in recovery. Got stuck in recovery mode reboot loop. Many gyrations, no fix, so I tried factory reset. Still no fix.
I decided to install a new version of the OS using the Mantaray tar you reference above. UBS connecting and fastboot. All messages look good. Now I have the problem reported in this thread. Stuck with flying balls and no boot. Very interested in any suggestions you may have.
Click to expand...
Click to collapse
Gibbothegreat said:
Hi Khaon, I have stock lollipop version 5.1.1 . (LMY47V) and latest twrp version. When upgrading it restarts and goes to recoverys main screen.
BTW how can I check which version my bootloader is?
Click to expand...
Click to collapse
So you keep just boot looping into twrp, right ?
Did you try installing a custom ROM through adb or just connecting your device?
If it keeps boot looping you gotta to wipe the full storage.
Khaon said:
So you keep just boot looping into twrp, right ?
Did you try installing a custom ROM through adb or just connecting your device?
If it keeps boot looping you gotta to wipe the full storage.
Click to expand...
Click to collapse
No, on a normal reboot or a shutdown/restart it's fine no problems there but when I try to install the update via system update it reboots into twrp. I attach a pic of my system.
Gibbothegreat said:
No, on a normal reboot or a shutdown/restart it's fine no problems there but when I try to install the update via system update it reboots into twrp. I attach a pic of my system.
Click to expand...
Click to collapse
Oh I see, well, you should just flash a custom ROM or if you want to stay with official factory images, you should just follow instruction there:
https://developers.google.com/android/nexus/images
What you do need is just have fastboot executable once you are into the bootloader.
You can easily access the bootloader from twrp : shutdown > reboot into booatloader
Cool thx for your continued help :good:
The problem is due to your attempting an OTA update with a custom recovery (TWRP). You can only do OTA with stock recovery. Once you are in this situation, your easiest way out of it is to simply apply the latest factory image using "fastboot", but this will also wipe your user data so backup any photos, music, etc. before you start. You will also have to reload programs from Playstore once the new image is installed.
hello,
so i was installing cm13 while installing i wiped entire partition(data,including system)
now i can only boot into recovery , i installed cm13, cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394 , after installing if i reboot it will again go to reovery only wont boot into phone..
please help
thank you
ancilary said:
i installed cm13, cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394 , after installing ..
Click to expand...
Click to collapse
That's doesn't make sense, can you explain what it means? Which recovery, which rom was installed and was working? You wipes system and data, ok. What did you do then?
strongst said:
That's doesn't make sense, can you explain what it means? Which recovery, which rom was installed and was working? You wipes system and data, ok. What did you do then?
Click to expand...
Click to collapse
hi , thanks for reply
i was using nought rom 7.0 & TEAMWIN recovery
i performed wipe ( data , cache , system , internal storage)
then installed cm13
it booted only to recovery , after that i tried flashing different rom , no use everytime it goes only to recovery..
What's with your other request? http://forum.xda-developers.com/zuk-z1/help/how-to-make-device-stock-t3515921
You need cm13 or stock rom? It's annoying to open several threads..
strongst said:
What's with your other request? http://forum.xda-developers.com/zuk-z1/help/how-to-make-device-stock-t3515921
You need cm13 or stock rom? It's annoying to open several threads..
Click to expand...
Click to collapse
that was different but i tried this and now im stuck here
ancilary said:
that was different but i tried this and now im stuck here
Click to expand...
Click to collapse
And what you need is a running cm13 now?
strongst said:
And what you need is a running cm13 now?
Click to expand...
Click to collapse
ya running cm or any other rom is fine..
ancilary said:
ya running cm or any other rom is fine..
Click to expand...
Click to collapse
seems you don't know what you need cm isn't the same as cos, the difference is huge.
For cos12.1 stock rom you can get it here http://forum.xda-developers.com/zuk-z1/help/how-to-make-device-stock-t3515921/post70007487
Flash it with all in one tool, it's the easiest way.
Cm13 you can flash it though twrp.
strongst said:
seems you don't know what you need cm isn't the same as cos, the difference is huge.
For cos12.1 stock rom you can get it here http://forum.xda-developers.com/zuk-z1/help/how-to-make-device-stock-t3515921/post70007487
Flash it with all in one tool, it's the easiest way.
Cm13 you can flash it though twrp.
Click to expand...
Click to collapse
i flashed cm-12.1-YOG4PAS3AJ-ham-signed.zip with twrp still i get booted to recovery only
ancilary said:
i flashed cm-12.1-YOG4PAS3AJ-ham-signed.zip with twrp still i get booted to recovery only
Click to expand...
Click to collapse
You didn't understand or read my post... You need to flash stock firmware with fastboot. I didn't wrote flash it with twrp.
Use the all in one tool. It's called so, because you can do all with it. Like downloading stock rom and flash it :good:
strongst said:
You didn't understand or read my post... You need to flash stock firmware with fastboot. I didn't wrote flash it with twrp.
Use the all in one tool. It's called so, because you can do all with it. Like downloading stock rom and flash it :good:
Click to expand...
Click to collapse
i tried flashing stock recovery using All in one tool but now its not booting to recovery only
ancilary said:
i tried flashing stock recovery using All in one tool but now its not booting to recovery only
Click to expand...
Click to collapse
Sorry mate, why you do that? It said to flash stock rom with all in one tool, not stock recovery
strongst said:
Sorry mate, why you do that? It said to flash stock rom with all in one tool, not stock recovery
Click to expand...
Click to collapse
i read it as recovery my bad...
now i cannot boot into recovery/fastboot.
powers on rarely too just shows zuk logo and goes off
ancilary said:
i read it as recovery my bad...
now i cannot boot into recovery/fastboot.
powers on rarely too just shows zuk logo and goes off
Click to expand...
Click to collapse
Use all in one tool to boot into bootloader. Read carefully or your next step is qfil method
Here's a good guide in case you're don't get it through aoi tool: http://forum.xda-developers.com/zuk-z1/general/qpst-method-how-to-unbrick-to-stock-t3506833
But better to check again if you can flash stock cos rom with tool
strongst said:
Use all in one tool to boot into bootloader. Read carefully or your next step is qfil method
Here's a good guide in case you're don't get it through aoi tool: http://forum.xda-developers.com/zuk-z1/general/qpst-method-how-to-unbrick-to-stock-t3506833
But better to check again if you can flash stock cos rom with tool
Click to expand...
Click to collapse
Nothing is happening in phone , no respone for any button press . its wont turn on also now
ancilary said:
Nothing is happening in phone , no respone for any button press . its wont turn on also now
Click to expand...
Click to collapse
Can you charge it?
After doing the root method located here: https://forum.xda-developers.com/v20/how-to/instruction-to-root-h918-10i-t3536472 my phone only boots into twrp and only has the twrp file on it. When i try to reboot into system it just sends me right back into twrp. I have no idea how that happened and i might of done the impossible but, is there any way to fix it? It's a T-Mobile 10j V20
Update: Tried installing therom from: https://forum.xda-developers.com/v20/development/rom-maximum-ovrdrive-lg-v20-v2-0-t3518475 and yet it still only shows twrp folder and wont boot to the start screen
Strasius said:
After doing the root method located here: https://forum.xda-developers.com/v20/how-to/instruction-to-root-h918-10i-t3536472 my phone only boots into twrp and only has the twrp file on it. When i try to reboot into system it just sends me right back into twrp. I have no idea how that happened and i might of done the impossible but, is there any way to fix it? It's a T-Mobile 10j V20
Click to expand...
Click to collapse
The fast thing to come to mind is too flash a stock rom
Still_living714 said:
The fast thing to come to mind is too flash a stock rom
Click to expand...
Click to collapse
I'll give that a try as soon as i can find a rom for stock
Strasius said:
I'll give that a try as soon as i can find a rom for stock
Click to expand...
Click to collapse
There is. Flash MEGAROM v5 it's 10k base
Still_living714 said:
There is. Flash MEGAROM v5 it's 10k base
Click to expand...
Click to collapse
my phone was 10j, will it work?
Strasius said:
my phone was 10j, will it work?
Click to expand...
Click to collapse
Yup and remember to press that thanks button ?
Still_living714 said:
Yup and remember to press that thanks button
Click to expand...
Click to collapse
i will, but one last question. is flashing a rom the same as installing something like SuperSU where i just select install and then the zip?
Strasius said:
i will, but one last question. is flashing a rom the same as installing something like SuperSU where i just select install and then the zip?
Click to expand...
Click to collapse
Yeah, MEGAROM wise it will take you into aroma installer which you can choose exactly what you want, like you can chose to flash magisk or supersu, lg sounds or pixel etc... Of everything else fails then just grab kdz file and flash through lg up
Still_living714 said:
Yeah, MEGAROM wise it will take you into aroma installer which you can choose exactly what you want, like you can chose to flash magisk or supersu, lg sounds or pixel etc... Of everything else fails then just grab kdz file and flash through lg up
Click to expand...
Click to collapse
That is awesome! I hope it finally works and lets me see that beautiful start screen
It did not, and LGUP isnt working with a Failed to load error (5)
sounds like ur in a twrp loop.. are you checking to see if system is getting mounted in twrp?
there are a few ways to fix a twrp loop, try booting into recovery using the vol down method, and see if just hitting reboot works,
if not, fastboot commands that address this would be fastboot erase etc; fastboot erase misc ; fastboot erase fota ; and then reboot and see if it boots.
be aware boot up times take a lot longer then usual when you root, as the aboot is a little slower.
you could also try the twrp file manager route and delete the above directories also, etc/misc/fota/cache
if you have never done a FORMAT data with twrp you need to do that 1st and remove encryption as the stock rom is encrypted and will not boot after root.
Wipe using format data, type yes, then wipe the directories i mentioned and then flash the stock rom mentioned by the other member then reboot and let it sit for 15min. If it dosn't instantly shoot you back to twrp then ur good, just wait wait wait for that long 1st boot to complete.
but ....... I am in twrp unable to reboot into my rom. When I click on Install I see all these folders with letters and numbers and what my original folders.
Can somone help me boot into my rom again?
ms.journie said:
but ....... I am in twrp unable to reboot into my rom. When I click on Install I see all these folders with letters and numbers and what my original folders.
Can somone help me boot into my rom again?
Click to expand...
Click to collapse
You will more than likely need to format data. This will cause you to loose everything. But that is what you are seeing, those folders, are your data. Just encrypted.
Also make sure you are on the latest version of TWRP. Sometimes the older unsupported version had encryption errors.
Omg this saddens me! So there's no way I am unable to at least retrieve my pictures?
Scott said:
You will more than likely need to format data. This will cause you to loose everything. But that is what you are seeing, those folders, are your data. Just encrypted.
Also make sure you are on the latest version of TWRP. Sometimes the older unsupported version had encryption errors.
Click to expand...
Click to collapse
Have u tested change boot partition ?
yup
J3zz said:
Have u tested change boot partition ?
Click to expand...
Click to collapse
ms.journie said:
yup
Click to expand...
Click to collapse
Simple test are:
- change boot partition
- reflash system
- Say goodbye too all
Got the same problem, Solved After reboot in twrp and enter the good decryption code
I'm right in the middle of reflashing. I am trying everything else before I do say goodbye to my pictures! :crying:
How did you figure out the decryption code?
J3zz said:
Simple test are:
- change boot partition
- reflash system
- Say goodbye too all
Got the same problem, Solved After reboot in twrp and enter the good decryption code
Click to expand...
Click to collapse
ms.journie said:
I'm right in the middle of reflashing. I am trying everything else before I do say goodbye to my pictures! :crying:
How did you figure out the decryption code?
Click to expand...
Click to collapse
First time entering in twrp after flashing update, I did not get folder to flash magisk, did a reboot and get it, just a bad encryption code I think
Did u flash rom or anything else before getting this problem ?
Yup, I sure did! 4am couldn't sleep so I thought I would finally put a fingerprint mod on; which I have done this before with no issues. For the life of me, I don't remember which mod I tried to install thru Magisk.
My phone is currently stuck on "Phone is starting"
I also think it's time to look into some sort of automatic back up service..... Got any ideas?
J3zz said:
First time entering in twrp after flashing update, I did not get folder to flash magisk, did a reboot and get it, just a bad encryption code I think
Did u flash rom or anything else before getting this problem ?
Click to expand...
Click to collapse
ms.journie said:
Yup, I sure did! 4am couldn't sleep so I thought I would finally put a fingerprint mod on; which I have done this before with no issues. For the life of me, I don't remember which mod I tried to install thru Magisk.
My phone is currently stuck on "Phone is starting"
I also think it's time to look into some sort of automatic back up service..... Got any ideas?
Click to expand...
Click to collapse
Use msmdownloadtool, have u tried using magisk uninstall in twrp with zip file ? Then boot and uninstall the "****in" fantastic module... maybe it works
I did try to uninstall Magisk in twrp using adb shell. I never had any luck with that msmdownloadtool and not only that it relocks your bootloader.
I usually go this route [ROM][STOCK][FASTBOOT][OP6T] Stock Fastboot ROMs for OnePlus 6T https://forum.xda-developers.com/oneplus-6t/how-to/rom-stock-fastboot-roms-oneplus-6t-t3862516
Thanks for trying to me!
J3zz said:
Use msmdownloadtool, have u tried using magisk uninstall in twrp with zip file ?
Click to expand...
Click to collapse
ms.journie said:
I did try to uninstall Magisk in twrp using adb shell. I never had any luck with that msmdownloadtool and not only that it relocks your bootloader.
I usually go this route [ROM][STOCK][FASTBOOT][OP6T] Stock Fastboot ROMs for OnePlus 6T https://forum.xda-developers.com/oneplus-6t/how-to/rom-stock-fastboot-roms-oneplus-6t-t3862516
Thanks for trying to me!
Click to expand...
Click to collapse
Good luck !!
I saw this happen when I used the official TWRP app.
It went away when I used this TWRP. Hope that helps.
I'm glad you already know not to use the MSM tool. Too many people jump straight to this.....
You just need to boot the correct recovery and your data will decrypt, and you will be able to back it up to a PC, then you can reload your ROM via TWRP or Fastboot to get the phone bootable again. So now it's a question of what ROM were you running before. Do you need a recovery with the latest security patch or something older? What TWRP are you running. Try 3.3.1-6 psychen6 linked too first. Boot that image from Fastboot. See if your password/pin will work to decrypt your data.
Problem caused: Factory reset in custom ROM, causing the phone to boot into twrp (even when plug in charger)
Method: refer to post #6 below
Anghirrim_shared_drive (Maintained by Anghirrim)
OP: Tried to perform a factory reset on LOS 14.1, it didn't go as plan. The phone boots into twrp, after I tried to flash LOS 14.1 over MM_rootable. The phone keeps booting into twrp, even though there is a ROM installed.
I assume I messed my boot partition tho?
Did more searching on this issue, from other model of phone also experiencing similar issue. It was a twrp bootloop.
my best bet is to grab a boot.img and flash it.
@Anghirrim sorry to interupt you, but do you have any method for fixing this?
Currently stuck at twrp. even I tried to boot into system/ download mode/ bootloader etc. It just bring me back to twrp. Couldn't use LGUP becoz I can't get into download mode. now I stuck with a phone with only twrp.
Tried flashing MM_flashable and return flashed successfully, but still boot into twrp.
Edit: Tried to plug my phone into a charger, brings me into twrp
purpleish said:
@Anghirrim sorry to interupt you, but do you have any method for fixing this?
Currently stuck at twrp. even I tried to boot into system/ download mode/ bootloader etc. It just bring me back to twrp. Couldn't use LGUP becoz I can't get into download mode. now I stuck with a phone with only twrp.
Tried flashing MM_flashable and return flashed successfully, but still boot into twrp.
Edit: Tried to plug my phone into a charger, brings me into twrp
Click to expand...
Click to collapse
Hi, did you try to factory reset it under stock flashable firmware ? Because if you did so, it will bootloop into TWRP trying to reach stock recovery.
Anghirrim said:
Hi, did you try to factory reset it under stock flashable firmware ? Because if you did so, it will bootloop into TWRP trying to reach stock recovery.
Click to expand...
Click to collapse
yea, I did.
I used the factory reset option in LOS 14.1
Is there a way to fix it?
purpleish said:
yea, I did.
I used the factory reset option in LOS 14.1
Is there a way to fix it?
Click to expand...
Click to collapse
Yes there is. Can you first have a look at my Google Drive? I think I uploaded a .txt file with the instructions.
purpleish said:
yea, I did.
I used the factory reset option in LOS 14.1
Is there a way to fix it?
Click to expand...
Click to collapse
There is a TWRP bootloop fix .txt file on my Gdrive. Can you have a look at it and report if it works?
Anghirrim said:
Yes there is. Can you first have a look at my Google Drive? I think I uploaded a .txt file with the instructions.
There is a TWRP bootloop fix .txt file on my Gdrive. Can you have a look at it and report if it works?
Click to expand...
Click to collapse
Yes, It works. Thank you.
Updated title & OP
purpleish said:
Yes, It works. Thank you.
Updated title & OP
Click to expand...
Click to collapse
Side point, I personaly prefer AEX (AOSPExtended) over LOS.
Anghirrim said:
Side point, I personaly prefer AEX (AOSPExtended) over LOS.
Click to expand...
Click to collapse
0.o , could try that as well.
Flashing it after download is complete.
Edit, danm it O .o turns into
Any issue?
Anghirrim said:
Any issue?
Click to expand...
Click to collapse
didn't flashed yet. I would let you know after I flash it.
Anghirrim said:
Any issue?
Click to expand...
Click to collapse
Phone flashed, still trying out the ROM.
will give an update a week later
@Anghirrim Nice ROM, everything I wanted is included in the rom.
but I have some problem with magisk manager, it wasn't working. (coz I want to get root)
1. How to get twrp
2. and therefore flash magisk manager
Edit: Nah, just have to redo it. Everything was good.
Maybe one day I should port AEX to another phone (cough cough Galaxy S2 cough cough).