Related
my friend has an a500 and she cannot install anything from the market. It says cannot be installed in your country but we live in the United States!!!!
How can I fix tyis for her?
Novarider said:
my friend has an a500 and she cannot install anything from the market. It says cannot be installed in your country but we live in the United States!!!!
How can I fix tyis for her?
Click to expand...
Click to collapse
When did it start? Does it happen on certain apps or all of them?
Easy solution is to delete market data from settings, than delete google account from tablet and restart the tablet. Also, if it's rooted, you could try a different rom (maybe one with a market update).
This did not work for me, I have this problem for a month, I am not rooted and already sent a message to market. They are kinda trying to resolve it (I don't think so) and apparently they are waiting for ICS to come out and clear the problem.
cheers
And make sure the devices region is set to the U.S.?
It's 100% stock and she says it has always been this way (she didn't know it was supposed to be different)
I will try deleting market data next.
It's an old version of the marketing is there a way to manually update the market to the newest version? Would that help?
Where do you change the device region at? That was the first thing I looked for but couldn't find it.
Have her check her timezone. I know that sounds crazy, but I ran into that on a previous tablet I had.
I did a factory reset then went through setup and set it to the correct time zone but I didn't see anything for the region. I don't know what's up with it. I'm hopeing someone else has had this problem and can tell me how they fixed it. Short of rooting it I don't know what to do.
Novarider said:
I did a factory reset then went through setup and set it to the correct time zone but I didn't see anything for the region. I don't know what's up with it. I'm hopeing someone else has had this problem and can tell me how they fixed it. Short of rooting it I don't know what to do.
Click to expand...
Click to collapse
To change the region, you'll have to do it on your google account as you log in to market with that. It did not work for me but I did not change the time zone though.
The region on Google.com is set to united states.
I'm thinking that the only way to fix it is to root it.
log in with a different account and make sure it works. If not go get another one, that one sounds like a headache
Hmmm I was thinking it was a problem with the tab not her account. I will try putting my account on it and see what happens.
She can't return it she has had it since August she thought it was supposed to be the way it is.
Novarider said:
Hmmm I was thinking it was a problem with the tab not her account. I will try putting my account on it and see what happens.
She can't return it she has had it since August she thought it was supposed to be the way it is.
Click to expand...
Click to collapse
I don't believe it is a tab problem. I have the same issue with my A500 and HTC Sensation. It is either a region problem or market (app) problem.
Have u ever tried to log in on the market on a PC? There you can install apps too, if your account has recognised your device. The apps r then automatically installed on the device chosen by u....
swissdiving said:
Have u ever tried to log in on the market on a PC? There you can install apps too, if your account has recognised your device. The apps r then automatically installed on the device chosen by u....
Click to expand...
Click to collapse
I have same problem on the web also
rom on tab for foreign markets
This was a common issue back when the tablet started shipping. Look at the rom version in settings about tablet compare it to some of the us rom versions.
Has this tablet received ota updates.if not and will not do so. Root install cwm. Use acer recovery installer to do so.
Then install a rom of your choice. Look in dev area for a stock rom any us version will do even if its older.then run the update in settings about .
Good luck.
You can also try going to settings. Privacy and reset to factor default.
Or turn tablet off.hold the reset button in with a paperclip and power up.this will reset to factory (easy but not likely fix .
I agree with above its a region setting.
Had simlar issue I cleared all with wipe menue in cwm. Deleted and reinstalled my Google account.
First of all, I may be posting this in the wrong section. But I desperately need your help on this.
I got a Jiayu S3, and couldn't not try to flash a custom rom on it, so I tried with "Pure AOSP V1 TF".
All went well, untill i found this app which was included with the rom, "Kinguser" (should be Superuser, i believe), which game me the option to toggle root.
At first and only time I opened this Kinguser app, option root was active. I did deactivate it, and reactivated immediately after.
As soon as i reactivated root, the privacy pin screen showed up.
I didn't set any PIN on my phone, so at first i thought it could be something like 1111 or 0000. Tried 5 times and it made me wait 30 seconds. Then tried another 3-4 times.
Here began the real mess: "forgot pin" (or psw) didn't show up, but at the time i didn't even know about that recovery option.
I didn't know what to do, so I just thought that a factory reset would certainly solve the problem, how couldn't it? Well, wiped everything, but PIN lock screen didn't go away.
So, wiping everything, I also deleted my gmail account from the phone, and I lost the possibility to lock phone and give it a new password (Android Device Manager). Too bad at the time I didn't know about this recovery option as well...
Now I'm out of ideas. I think I've tried every method I could find with a search of "Smartphone PIN locked". Tried with resets, plugins, deleting files with adb..
How do I unlock my phone?
little update: after a factory reset, for 2-3 seconds, it shows the default initial screen, but it doesn't last more that and i just can't do anything.
Now i managed to bring back the stock rom, but with that i lost the twrp recovery, and i can't find a way to make pc recognize the phone to reflash it.
It seems it's going worse instead of better...
I had just bought this Jiayu S3 and planned to bring it on holidays on wednesday, but i'm starting to think i won't be able to fix it before then
Did you have any resolution to this problem. I am currently sitting in the exact same boat. Did the factory reset, pass code screen still there, I didn't set a pass code. Basically hands tied, can't update firmware, guessing i'll have to get a new phone, but hoping maybe you found a miracle cure! ha! - Thanks for any guidance. - Arden (Seattle, WA)
Just flash another rom (stock/original) and start over.
How have you done that?
Can you help please?
I tried factory reset (volume plus+ power button), hard reset (volume- plus power button), update, and nothing works; I also went to two different specialized stores and they failed to find a way to reinstall the original Android version or a recent one.
Comparing the files with the factory version installed in the phone, the phone report identified three changes:
- a new file: /system/priv-app/7mK0T6e8Z5.apk
- the lost of a file: /system/app/com.android.fallen.apk
- and a modified file: /system/bin/debuggerd
AzulFogo said:
How have you done that?
Can you help please?
Click to expand...
Click to collapse
To flash firmware you can use SP Flash Tool on a windows or linux computer (not sure about macosx). You have to decide which firmware you want (which one do you have now?). The 'official' firmwares can be found on needrom. SP Flash Tool can be found there as well. There are 2 popular LP firmwares built by Jiayu resellers in Europe (Xtreme from Spain and Jiayu.de from Germany). Guides on how to flash are often present at the place where you find the firmware.
Dior DNA said:
To flash firmware you can use SP Flash Tool on a windows or linux computer (not sure about macosx). You have to decide which firmware you want (which one do you have now?). The 'official' firmwares can be found on needrom. SP Flash Tool can be found there as well. There are 2 popular LP firmwares built by Jiayu resellers in Europe (Xtreme from Spain and Jiayu.de from Germany). Guides on how to flash are often present at the place where you find the firmware.
Click to expand...
Click to collapse
Thank you!
I found "Xtreme from Spain":
needrom.com/download/rom-xtreme-rom-tf/
I found the "SP Flash Tool":
needrom.com/download/sp-flash-tool-v5-1424-00/
but it is for Linux... can you send me the link of the windows version?
And I could not found the "Jiayu.de from Germany": can you send the link?
Also, can you recommend some good manual for dummies?
Thanks again for your patient and help!
latest sp flash tools is 5.1532
search needrom with "5.1532" will leed you to the download page
no link allowed here, so ...
for beta 10 from jiyau.de, search google with "jiyau.de Lollipop 5.1.1 - Beta 10 (14.10.2015)".
it will leeds you to the rom.
Good hunting
tuto sp flash tool
https://youtu.be/ztI8sc8MUNo
AzulFogo said:
Thank you!
I found "Xtreme from Spain":
needrom.com/download/rom-xtreme-rom-tf/
I found the "SP Flash Tool":
needrom.com/download/sp-flash-tool-v5-1424-00/
but it is for Linux... can you send me the link of the windows version?
And I could not found the "Jiayu.de from Germany": can you send the link?
Also, can you recommend some good manual for dummies?
Thanks again for your patient and help!
Click to expand...
Click to collapse
see jaunedoeuf's answers
I would like to add: if you come from KK and go to LP, you must use firmware upgrade to update/adjust internal SD partition layout. Good Luck! if you succeed, and are happy with firmware, consider voting @ http://forum.xda-developers.com/android/general/firmware-jiayu-s3-t3212184 (almost 100 votes)
First, thank you for your great help!
With your suggestions, I managed to install Lolipop in my Jiayu S3S (upgraded from Kit Kat) - Xtreme ROM TF (JiayuS3-5.1Extreme1.1SP.zip).
However the problem remain... the phone still is asking for a PIN (that I never had put there, in first place)...
What should I do now?
you could try factory reset and are you sure its the phone asking for pin and not the sim card
Hello everyone!
I have a big issue with this tablet: after the new update to 7.0 I notice the system is consuming a lot of internal space and the system is not stable like it should be.
What I would like to do is to revert to the previous firmware/version or try to install any other bootloader wich now is beeing very difficult because I dont know how to do and the steps that I read to do it are very complicated.
Does anyone can help me to install the firmware on this tablet?
I have everything, the tools, the firmwares, cables, the pc... everything.
Then other thing is when I try to go to bootloader, I mean, is in chinese!!! Is not even simple and looks I cant solv my problem at all.
Please, anyone can give me a hand?
Thanks in advance for all your help and sorry about my bad english.
I will give a party with those who can help me and I will offer beers to everyone!
Thanks!
Where did you get the firmware ?
I have exactly the same problems. I managed to get the Z300M software from the ASUS website but not the P00C. Would like to roll back to software from May or before.
same EXACT problem... looks like audio_dump .wav files are the culprit but cannot delete them. used fastboot to factory reset after 7.0 update and problem came back 3 days later! can't find any older updates for the p00c online either
Somebody posted a possible solution in another thread. Can you see if it works for you?
diplomatic said:
Hey guys, see if this works:
Install Engineer Mode MTK shortcut
Turn on developer options
Start Engineer Mode. Go to Hardware Testing -> Audio -> Audio Logger
Uncheck any boxes that are checked
Profit (and maybe reboot)
All in all, I don't understand why some tablets have the logging enabled and other don't, if this is indeed the issue. I've never seen it enabled, even after a factory reset.
If you have the audio logging issue on either the Z380M or the Z300M, please post:
Your firmware SKU
Your region code given by the property ro.config.versatility (may need a terminal app to read that via getprop)
The firmware version you were on when you reset your tablet
Click to expand...
Click to collapse
I have had a moto g6 plus for some time now, but nowadays I am not able to detect SIM cards and wifi does not turn on, what is happening?
Wellfare11 said:
I have had a moto g6 plus for some time now, but nowadays I am not able to detect SIM cards and wifi does not turn on, what is happening?
Click to expand...
Click to collapse
Can you tell us more?
How did it start?
Did something happen to it, or did you just notice it is not connecting?
The most easy things first, is your sim card correctly in place?
Which ROM are you on and have you reflashed it?
weazie said:
Can you tell us more?
How did it start?
Did something happen to it, or did you just notice it is not connecting?
The most easy things first, is your sim card correctly in place?
Which ROM are you on and have you reflashed it?
Click to expand...
Click to collapse
The phone started with problems since I upgraded to Android Pie, I have taken care of it very well but I do not know if it is a hardware failure, but note that in baseband turns out to be unknown, I installed several stock roms from fastboot without any success, also I thought it would be a problem of the EFS partition, but everything is fine I even took a backup in case the doubts, what could happen?
Wellfare11 said:
The phone started with problems since I upgraded to Android Pie, I have taken care of it very well but I do not know if it is a hardware failure, but note that in baseband turns out to be unknown, I installed several stock roms from fastboot without any success, also I thought it would be a problem of the EFS partition, but everything is fine I even took a backup in case the doubts, what could happen?
Click to expand...
Click to collapse
Did you originally update via OTA, meaning, was it the official update?
Then when you noticed it's not working, you tried to flash several stock ROMs?
One possible problem that comes to mind, is that for some reason, you have the wrong radio/modem firmware. That can happen for example, if you have flashed a ROM, which is not meant for your region.
weazie said:
Did you originally update via OTA, meaning, was it the official update?
Then when you noticed it's not working, you tried to flash several stock ROMs?
One possible problem that comes to mind, is that for some reason, you have the wrong radio/modem firmware. That can happen for example, if you have flashed a ROM, which is not meant for your region.
Click to expand...
Click to collapse
Yes, upgrade to Android pie via OTA
I already put a stock rom of the same region, following each fastboot command one by one, but everything continues the same, I even installed RROS 7, to see if at least it turned on the wifi, and it is in bootloop.
Wellfare11 said:
Yes, upgrade to Android pie via OTA
I already put a stock rom of the same region, following each fastboot command one by one, but everything continues the same, I even installed RROS 7, to see if at least it turned on the wifi, and it is in bootloop.
Click to expand...
Click to collapse
Go with the modding guide index: how to restore stock ROM etc., and flash a stock ROM that you know will work. Flash the radio/modem file too, and make sure it's the correct one.
Just to say, I had connection problems too, and in the end they were because the sim card did not latch correctly in place i.e. was not correctly in place.
weazie said:
Go with the modding guide index: how to restore stock ROM etc., and flash a stock ROM that you know will work. Flash the radio/modem file too, and make sure it's the correct one.
Just to say, I had connection problems too, and in the end they were because the sim card did not latch correctly in place i.e. was not correctly in place.
Click to expand...
Click to collapse
I already tried, I installed the rom corresponding to the model of the cell phone and the wifi still does not work, the base band is still unknown, I also checked if the sim card was correctly placed, and everything is fine
weazie said:
Go with the modding guide index: how to restore stock ROM etc., and flash a stock ROM that you know will work. Flash the radio/modem file too, and make sure it's the correct one.
Just to say, I had connection problems too, and in the end they were because the sim card did not latch correctly in place i.e. was not correctly in place.
Click to expand...
Click to collapse
I have an idea, but I need someone to help with a backup of the files, Radio, Modem, and Persist to flash in twrp
Wellfare11 said:
I have an idea, but I need someone to help with a backup of the files, Radio, Modem, and Persist to flash in twrp
Click to expand...
Click to collapse
Great that you have an idea. ?
Here's an idea: take a backup of your current config in twrp, move it to the computer, take a copy. Replace the files in that copy with the ones that you want to flash.
Did you mean this? You are aware that you can try different radio/modem files through fastboot, not having to flash everything else every time? That said, go with your idea. ?
weazie said:
Great that you have an idea.
Here's an idea: take a backup of your current config in twrp, move it to the computer, take a copy. Replace the files in that copy with the ones that you want to flash.
Did you mean this? You are aware that you can try different radio/modem files through fastboot, not having to flash everything else every time? That said, go with your idea.
Click to expand...
Click to collapse
I already tried and still does not give results curiously I have noticed that even in bootloader shows, Baseband not fund
Wellfare11 said:
I already tried and still does not give results curiously I have noticed that even in bootloader shows, Baseband not fund
Click to expand...
Click to collapse
Does the phone ask for a pin code at any point?
weazie said:
Does the phone ask for a pin code at any point?
Click to expand...
Click to collapse
does not request any code at any time
Wellfare11 said:
does not request any code at any time
Click to expand...
Click to collapse
Ok, but WiFi should work even if there is no mobile data available.
I probably can't help at this point, apologies! My suggestion is to flash a stock ROM, lock the bootloader and send the phone for repairs. There could be a solution to this, but I'm out of ideas. ?*
weazie said:
Ok, but WiFi should work even if there is no mobile data available.
I probably can't help at this point, apologies! My suggestion is to flash a stock ROM, lock the bootloader and send the phone for repairs. There could be a solution to this, but I'm out of ideas. *
Click to expand...
Click to collapse
from what I see, if there is no baseband it does not detect the sim card and it does not turn on the wifi, I will try to force an OTA retail update
it did not work
Wellfare11 said:
from what I see, if there is no baseband it does not detect the sim card and it does not turn on the wifi, I will try to force an OTA retail update
it did not work
Click to expand...
Click to collapse
Hello, colud you solve the problem? Because I am havig a very similar one...
Hello group friends, I'm new here. I have a similar problem, I was using the Havoc 2.4 rom, when upgrading to 2.6 I no longer recognize my SIM card and the wi-fi does not connect, I can not install another rom anymore, nor rom stock, recovery TRWP has been replaced by the Havoc and the Wipe System function does not work, and for a few days you can not stay in recovery mode anymore, it restarts every 3 seconds, not the time to click the options. Can someone help me. I'm without a cell phone, and I need it.
I have a similar issue after flashing the latest firmware. SIM goes to "SIM locked" every ten seconds or so, and Wifi drops at the same tie. It's like networking is being reset every 10 seconds. No network settings I've tried change that.
I've flashed several stock ROMs; the one I had previously, newest, oldest, both for RETEU and retail. I used Lenovo restore to upgrade but that resulted in soft brick, after that I flashed the latest firmware via Fastboot and that's when the problem started.
With Oreo, wifi and cellular don't work at all, nothing detected. With Pie they're connected and dropped in a loop. I can't help thinking that the Lenovo restore broke this somehow, but modem files have been reflashed several times after that with no change. I'm not getting the baseband error.
bitstuff said:
I have a similar issue after flashing the latest firmware. SIM goes to "SIM locked" every ten seconds or so, and Wifi drops at the same tie. It's like networking is being reset every 10 seconds. No network settings I've tried change that.
I've flashed several stock ROMs; the one I had previously, newest, oldest, both for RETEU and retail. I used Lenovo restore to upgrade but that resulted in soft brick, after that I flashed the latest firmware via Fastboot and that's when the problem started.
With Oreo, wifi and cellular don't work at all, nothing detected. With Pie they're connected and dropped in a loop. I can't help thinking that the Lenovo restore broke this somehow, but modem files have been reflashed several times after that with no change. I'm not getting the baseband error.
Click to expand...
Click to collapse
I have the exact same problem, I wasn't able to repair it so I sent it to service and tomorrow they will try to fix it for $35. The problem with goign back to previous versions is that you loose the IMEI and MAC . The problem with the pie version I believe is the baseband. If the service is able to fix it I will post the solution here for you to fix it .
bitstuff said:
I have a similar issue after flashing the latest firmware. SIM goes to "SIM locked" every ten seconds or so, and Wifi drops at the same tie. It's like networking is being reset every 10 seconds. No network settings I've tried change that.
I've flashed several stock ROMs; the one I had previously, newest, oldest, both for RETEU and retail. I used Lenovo restore to upgrade but that resulted in soft brick, after that I flashed the latest firmware via Fastboot and that's when the problem started.
With Oreo, wifi and cellular don't work at all, nothing detected. With Pie they're connected and dropped in a loop. I can't help thinking that the Lenovo restore broke this somehow, but modem files have been reflashed several times after that with no change. I'm not getting the baseband error.
Click to expand...
Click to collapse
Service couldn't fix it. Being honest they were quite incompetent, when I explained the problem he said "we should hire you" ( I am 16 years old) . Anyway, could you fix it? Because I am not even close
---------- Post added at 03:00 AM ---------- Previous post was at 02:54 AM ----------
caradobeco said:
Hello group friends, I'm new here. I have a similar problem, I was using the Havoc 2.4 rom, when upgrading to 2.6 I no longer recognize my SIM card and the wi-fi does not connect, I can not install another rom anymore, nor rom stock, recovery TRWP has been replaced by the Havoc and the Wipe System function does not work, and for a few days you can not stay in recovery mode anymore, it restarts every 3 seconds, not the time to click the options. Can someone help me. I'm without a cell phone, and I need it.
Click to expand...
Click to collapse
Sorry I answer so late, I didn's see the message before.
I believe you already tried puting it into bootloader mode. If that's the case, I had a similar problem recently an it solved alone, I let it loop for a while and suddenly fell, into dtock recovey, i factory reset (with stock recovery) and somehow stock was booted ( i believe it was because it was in inactive slot).
Hope this helps you
juampapo546 said:
Service couldn't fix it. Being honest they were quite incompetent, when I explained the problem he said "we should hire you" ( I am 16 years old) . Anyway, could you fix it? Because I am not even close
---------- Post added at 03:00 AM ---------- Previous post was at 02:54 AM ----------
Sorry I answer so late, I didn's see the message before.
I believe you already tried puting it into bootloader mode. If that's the case, I had a similar problem recently an it solved alone, I let it loop for a while and suddenly fell, into dtock recovey, i factory reset (with stock recovery) and somehow stock was booted ( i believe it was because it was in inactive slot).
Hope this helps you
Click to expand...
Click to collapse
I am still working on this, I actually did this to a work phone (I had permission to root/unroot). Something that has helped me so far is just getting familiar with the whole flashing process - https://android.gadgethacks.com/how...actory-images-android-using-fastboot-0175277/. I think from this article the problem lies in the modem/radio rom. That *should* be the only thing you need to flash on. However, I have noticed with a lot of roms on here, a modem rom is not included on the stock firmware. But that needs to match well to your phone from what I understand. I have tried a few modem roms already, unfortunately, but no luck.
Hey,
Need some help. My brand new AT&T S8 Active arrived yesterday. Since I am located outside the US I'm stuck with utilising Odin to update the software.
The current version listed on the AT&T website was 5CSK1 and I was able to track down the update:
https://forum.xda-developers.com/showpost.php?p=81251867&postcount=743
It installed successfully, everything is going well however I am unable turn on NFC. The toggle found in the settings menu is off and when I attempt to switch it on it greys out for a few seconds then the 'NFC keeps stopping' error appears on the bottom of the screen.
I've cleared the cache/data for the NFC app - no luck,
I've performed a factory reset via recovery menu - no luck.
I've installed the previous build 5CSJ3 from: https://forum.xda-developers.com/showpost.php?p=80903399&postcount=187 with a factory reset straight after - no luck.
I'm currently back on the latest K1 build.
Logcat shows errors with 'libnfc_nci' and a 'Fatal Exception' for the 'com.android.nfc' process. And to top it all off the NFC app is draining my battery.
If anyone can help me that would be awesome.
dchalkley said:
Hey,
Need some help. My brand new AT&T S8 Active arrived yesterday. Since I am located outside the US I'm stuck with utilising Odin to update the software.
The current version listed on the AT&T website was 5CSK1 and I was able to track down the update:
https://forum.xda-developers.com/showpost.php?p=81251867&postcount=743
It installed successfully, everything is going well however I am unable turn on NFC. The toggle found in the settings menu is off and when I attempt to switch it on it greys out for a few seconds then the 'NFC keeps stopping' error appears on the bottom of the screen.
I've cleared the cache/data for the NFC app - no luck,
I've performed a factory reset via recovery menu - no luck.
I've installed the previous build 5CSJ3 from: https://forum.xda-developers.com/showpost.php?p=80903399&postcount=187 with a factory reset straight after - no luck.
I'm currently back on the latest K1 build.
Logcat shows errors with 'libnfc_nci' and a 'Fatal Exception' for the 'com.android.nfc' process. And to top it all off the NFC app is draining my battery.
If anyone can help me that would be awesome.
Click to expand...
Click to collapse
ugh, the active line... there hasnt ever been much support for those. All you can really do is keep flashing the stock firmware and hope that the errors resolve themselves.
Side note: have you noticed how they stopped making the active phones? They were a dismal failure. All they are is the regular phone in a case that you cant take off :/
dchalkley said:
Hey,
Need some help. My brand new AT&T S8 Active arrived yesterday. Since I am located outside the US I'm stuck with utilising Odin to update the software.
The current version listed on the AT&T website was 5CSK1 and I was able to track down the update:
https://forum.xda-developers.com/showpost.php?p=81251867&postcount=743
It installed successfully, everything is going well however I am unable turn on NFC. The toggle found in the settings menu is off and when I attempt to switch it on it greys out for a few seconds then the 'NFC keeps stopping' error appears on the bottom of the screen.
I've cleared the cache/data for the NFC app - no luck,
I've performed a factory reset via recovery menu - no luck.
I've installed the previous build 5CSJ3 from: https://forum.xda-developers.com/showpost.php?p=80903399&postcount=187 with a factory reset straight after - no luck.
I'm currently back on the latest K1 build.
Logcat shows errors with 'libnfc_nci' and a 'Fatal Exception' for the 'com.android.nfc' process. And to top it all off the NFC app is draining my battery.
If anyone can help me that would be awesome.
Click to expand...
Click to collapse
Might try redownloading a different firmware from a differ location. I had this issue on a lg back in the day the camera wouldnt work no matter what I always restored stock with one firm I had. And it ended up being a bad download. Another possibility is a bad NFC chip. If it's new I'd have it warranted
Thankyou, Thankyou Youdoofus and TheMadScientist for your advice.
Woke up early today (3am) with coffee in hand I tried again downloading the K1 and J3 builds; neither worked.
Unfortunately there's no alternative download for them... Google points to the XDA forums which seem to come from some Russian forum.
I've gone to an earlier build - 5CSI3 - https://forum.xda-developers.com/showpost.php?p=80505887&postcount=186 which works.
So it's not a NFC chip issue, yay. Now, just need to figure out what I'll do when the next update hits at the end of this month.
dchalkley said:
Thankyou, Thankyou Youdoofus and TheMadScientist for your advice.
Woke up early today (3am) with coffee in hand I tried again downloading the K1 and J3 builds; neither worked.
Unfortunately there's no alternative download for them... Google points to the XDA forums which seem to come from some Russian forum.
I've gone to an earlier build - 5CSI3 - https://forum.xda-developers.com/showpost.php?p=80505887&postcount=186 which works.
So it's not a NFC chip issue, yay. Now, just need to figure out what I'll do when the next update hits at the end of this month.
Click to expand...
Click to collapse
Make sure your using the latest odin build 3.13. I dont have an active. **** I read it wrong so it does work on other builds?
TheMadScientist said:
Make sure your using the latest odin build 3.13. I dont have an active. **** I read it wrong so it does work on other builds?
Click to expand...
Click to collapse
Yeah, it's working on the 5CSI3 build from October 2019, there's been two recent updates since then (and another will come at the end of the month). I don't know what's happening as no one else has reported this issue .
Just wanting to be on the most recent version for security and the annoyance of having data wiped every update.
Edit: Yeah, Odin v3.13.1 . No errors being displayed, all green.
This issue is very likely to be caused by 3rd party sim unlock or FRP removal and meddling with knox.
I have been trying to get around this problem and it seems it is either a security measure to disable nfc payments on triggering knoxguard or problem with modem.
this problem started after CSJ3 update afaik and only on some phones, if someone can explain this would be great.
Solution:
You will lose all data so backup is recommended
Remove your SIM card, re-install the firmware with ODIN and check Nand Erase auto reboot and F. reset time
Check your KG status(checking or prenormal) on the bootloader, and in settings>device care you will see Security is disabled and it crashes when you click it.
I also noticed the settings menu is weird with many broken options and dailer codes dont work anymore.
EDIT: Workaround Solution:
THIS IS FOR G892A ONLY who have problem with NFC after updating to builds after December 2019
Disclaimer: do at your own risk and can break your phone signal or system detected as rooted/custom
note: you will lose all data, ONLY check "Auto Reboot" and "F. Reset Time" in odin
1) Backup your data
2) Delete your google account, so FRP : OFF in bootloader (this can cause problems if not done)
3) Flash 5 firmware files G892AUCS5CTC1 (latest rom with march 2020 security) and get back to bootloader
4) Flash 3 files from G892AUCS5CSI3 : BL, CP and CSC
(odin will say PASS, but recovery will give error)
5) select wipe data partition then reboot to system
when the phone starts you will see NFC logo in statusbar means you are successful
if you get errors while using odin: flash combination file : G892AUCU5ASD1 if this doesnt work it means you have different problem (cable, socket, pc, bad chip)
i tried flashing CP file only and phone booted into UPLOAD mode, so dont panic if you get into UPLOAD mode just reboot with 3 buttons to recovery and start over
Vcek said:
This issue is very likely to be caused by 3rd party sim unlock or FRP removal and meddling with knox.
I have been trying to get around this problem and it seems it is either a security measure to disable nfc payments on triggering knoxguard or problem with modem.
this problem started after CSJ3 update afaik and only on some phones, if someone can explain this would be great.
Solution:
You will lose all data so backup is recommended
Remove your SIM card, re-install the firmware with ODIN and check Nand Erase auto reboot and F. reset time
Check your KG status(checking or prenormal) on the bootloader, and in settings>device care you will see Security is disabled and it crashes when you click it.
I also noticed the settings menu is weird with many broken options and dailer codes dont work anymore.
EDIT: Workaround Solution:
THIS IS FOR G892A ONLY who have problem with NFC after updating to builds after December 2019
Disclaimer: do at your own risk and can break your phone signal or system detected as rooted/custom
note: you will lose all data, ONLY check "Auto Reboot" and "F. Reset Time" in odin
1) Backup your data
2) Delete your google account, so FRP : OFF in bootloader (this can cause problems if not done)
3) Flash 5 firmware files G892AUCS5CTC1 (latest rom with march 2020 security) and get back to bootloader
4) Flash 3 files from G892AUCS5CSI3 : BL, CP and CSC
(odin will say PASS, but recovery will give error)
5) select wipe data partition then reboot to system
when the phone starts you will see NFC logo in statusbar means you are successful
if you get errors while using odin: flash combination file : G892AUCU5ASD1 if this doesnt work it means you have different problem (cable, socket, pc, bad chip)
i tried flashing CP file only and phone booted into UPLOAD mode, so dont panic if you get into UPLOAD mode just reboot with 3 buttons to recovery and start over
Click to expand...
Click to collapse
Hello There!..kind of new about this so..long story short..
Phone had Android 8, and I really love Night mode on Android 9, so...I've found BL, AP, CP, CSC, USER Data ROM for GALAXY S8 ACTIVE AT&T Unlocked, however..I am a little bit afraid of any NAND Erase.
I am not an expert, but I can tell you are. By any chance do you have any vide or graphic tutorial abot how you can perform these actions? It is very odd that I am unable to have any *# codes working, and lately, I've received this odd message about NFC Service has stopped, so...any graphic step by step guide will be highly appreciated it.
I've tried ....soft reset, then factory reset, then flash again ODIN (BL, AP,CP, CSC and USER DATA ) But I have no idea how to back up my data, and it will be very helpful to have G892AUCS5CSI3 as well.
Thank you very much for your time, I hope you can help me and I appreciate very much your time.
The one that I have is AP_G892AUCS5CTC1_CL16888298_QB29841048_REV00_user_low_ship_MULTI_CERT_meta_OS9.tar
BL_G892AUCS5CTC1_CL16888298_QB29841048_REV00_user_low_ship_MULTI_CERT.tar
CP_G892AUCS5CTC1_CP15398738_CL16888298_QB29841048_REV00_user_low_ship_MULTI_CERT.tar
CSC_ATT_G892AATT5CTC1_CL16888298_QB29841048_REV00_user_low_ship_MULTI_CERT.tar
USERDATA_G892AUCS5CTC1_CL16888298_QB29841048_REV00_user_low_ship_MULTI_CERT.tar
SOLVED!
So...I've followed the steps to install only BL, CP and CSC using G892AUCS5CSI3...however, the system started as usual, and actually did not work =(
RESOLUTION:
INSTALL THE FULL G892AUCS5CSI3. Worked as magic =)
thank you for the thread!!
moncd6 said:
Hello There!..kind of new about this so..long story short..
Phone had Android 8, and I really love Night mode on Android 9, so...I've found BL, AP, CP, CSC, USER Data ROM for GALAXY S8 ACTIVE AT&T Unlocked, however..I am a little bit afraid of any NAND Erase.
I am not an expert, but I can tell you are. By any chance do you have any vide or graphic tutorial abot how you can perform these actions? It is very odd that I am unable to have any *# codes working, and lately, I've received this odd message about NFC Service has stopped, so...any graphic step by step guide will be highly appreciated it.
I've tried ....soft reset, then factory reset, then flash again ODIN (BL, AP,CP, CSC and USER DATA ) But I have no idea how to back up my data, and it will be very helpful to have G892AUCS5CSI3 as well.
Thank you very much for your time, I hope you can help me and I appreciate very much your time.
The one that I have is AP_G892AUCS5CTC1_CL16888298_QB29841048_REV00_user_low_ship_MULTI_CERT_meta_OS9.tar
BL_G892AUCS5CTC1_CL16888298_QB29841048_REV00_user_low_ship_MULTI_CERT.tar
CP_G892AUCS5CTC1_CP15398738_CL16888298_QB29841048_REV00_user_low_ship_MULTI_CERT.tar
CSC_ATT_G892AATT5CTC1_CL16888298_QB29841048_REV00_user_low_ship_MULTI_CERT.tar
USERDATA_G892AUCS5CTC1_CL16888298_QB29841048_REV00_user_low_ship_MULTI_CERT.tar
Click to expand...
Click to collapse
You can backup your data with Samsung backup and restore to Samsung cloud or to your PC with Samsung's Smart Switch app.
As for tutorial I'll try to make one with images for the latest ROM G892AUCU5CTF4 dated 20-Aug-2020 with August security patch. I'll upload it later as I still have to backup my phone before updating.
Thanks!
Thank you so much!
Is it G892AUCU5CTF4 a estable versión for S8 Active? Or does it has any other bugs? I had to "downgrade" and now things are pretty cool, however, I would love to have the newest version. Thank you!
moncd6 said:
Thank you so much!
Is it G892AUCU5CTF4 a estable versión for S8 Active? Or does it has any other bugs? I had to "downgrade" and now things are pretty cool, however, I would love to have the newest version. Thank you!
Click to expand...
Click to collapse
It doesn't have any bugs but some people have issue with flashing new builds, if you have this issue just install CSI3 build or earlier
dchalkley said:
It installed successfully, everything is going well however I am unable turn on NFC. The toggle found in the settings menu is off and when I attempt to switch it on it greys out for a few seconds then the 'NFC keeps stopping' error appears on the bottom of the screen.
I've cleared the cache/data for the NFC app - no luck,
I've performed a factory reset via recovery menu - no luck.
I've installed the previous build 5CSJ3 from: https://forum.xda-developers.com/showpost.php?p=80903399&postcount=187 with a factory reset straight after - no luck.
... And to top it all off the NFC app is draining my battery.
Click to expand...
Click to collapse
Same. I also tried CTA2 and CTL1. Everything after CSI3 has NFC crashing and excessive battery drain. I've tried multiple flashes on multiple phones.
dchalkley said:
I tried again downloading the K1 and J3 builds; neither worked.
Unfortunately there's no alternative download for them... Google points to the XDA forums which seem to come from some Russian forum.
I've gone to an earlier build - 5CSI3 - https://forum.xda-developers.com/showpost.php?p=80505887&postcount=186 which works.
So it's not a NFC chip issue, yay. Now, just need to figure out what I'll do when the next update hits at the end of this month.
Click to expand...
Click to collapse
Same.
dchalkley said:
I don't know what's happening as no one else has reported this issue .
Edit: Yeah, Odin v3.13.1 . No errors being displayed, all green.
Click to expand...
Click to collapse
Same here. I used Odin 3.14.1, though.
Vcek said:
Solution:
You will lose all data so backup is recommended
Remove your SIM card, re-install the firmware with ODIN and check Nand Erase auto reboot and F. reset time
Click to expand...
Click to collapse
This did not work for me, not even with "Nand Erase" checked.
moncd6 said:
It is very odd that I am unable to have any *# codes working, and lately, I've received this odd message about NFC Service has stopped, so...
Click to expand...
Click to collapse
Same. The problem of the secret dialer codes not working parallels the NFC problem for me; that is to say that it doesn't work on any firmware after CSI3.
moncd6 said:
SOLVED!
So...I've followed the steps to install only BL, CP and CSC using G892AUCS5CSI3...however, the system started as usual, and actually did not work =(
RESOLUTION:
INSTALL THE FULL G892AUCS5CSI3. Worked as magic =)
thank you for the thread!!
Click to expand...
Click to collapse
Can you please upload G892AUCS5CSI3? it's all dead links i got
rerenz said:
Can you please upload G892AUCS5CSI3? it's all dead links i got
Click to expand...
Click to collapse
Same. I'm not sure where I originally got it from, but here's a reupload from my archives. I created a list of MD5 checksums if you care to check the five files for corruption.
voidxor said:
Same. I'm not sure where I originally got it from, but here's a reupload from my archives. I created a list of MD5 checksums if you care to check the five files for corruption.
Click to expand...
Click to collapse
Finally, it works! My NFC is back. Thanks, pal.