Database Users

Stuck on Samsung Galaxy S5 screen when turning on phone

Hello everyone,
My phone just recently started having this issue, where the screen freezes when it first turns on. If I try plugging it in to charge, it freezes on the battery charging screen; there is no animation that indicates that it is charging. I've tried going into recovery mode but all there is is something that says "MMC: mmc_read fail Movinand Checksum Confirmation Fail". I can, however, go into download mode, where I can install a custom OS. It seems that this screen functions fine and my instinct is telling me that if I want to continue to use my phone, I'll have to reinstall the firmware. I'm not interested in installing a custom OS but I do just want to get my phone back. I did not do anything to my phone, I turned it off for a flight and when I landed, I turned it on and it started freezing when I tried using it. I was able to send out a few texts before it froze and I had to restart the phone but then it just wouldn't get past the Samsung Galaxy S5 screen.
Thank you for your help.

If I understand correctly your phone is not rooted ? Then only a factory reset will help you I think ...

In my experience, a factory reset will fix that, but wipe data also. On S3 and Note 3, I have Odin'ed stock firmwares over stock firmwares before and it has retained the data while fixing the problem. You may want to look into this method.

BCSC said:
In my experience, a factory reset will fix that, but wipe data also. On S3 and Note 3, I have Odin'ed stock firmwares over stock firmwares before and it has retained the data while fixing the problem. You may want to look into this method.
Click to expand...
Click to collapse
I've sort of looked into the Odin method but I'm still slightly confused and a little reluctant do so without clear instructions. Do you know of a particularly good tutorial that could help me with this? I do want to retain some of the data.
Thank you for your help, if this doesn't work, I'll probably just factory reset it.

allsheneedewassome said:
I've sort of looked into the Odin method but I'm still slightly confused and a little reluctant do so without clear instructions. Do you know of a particularly good tutorial that could help me with this? I do want to retain some of the data.
Thank you for your help, if this doesn't work, I'll probably just factory reset it.
Click to expand...
Click to collapse
Its quite simple. Donwload your region firmware from sammobile or from the firmware thread, open odin 3.07 (later versions have issues). Don't change any settings but do make sure "repartition" is NOT checked as this may cause brick. Click on "pda". Select the firmware you just downloaded. Now boot phone into download mode, I believe its vol down home and power pressed altogether. Dismiss the warning and connect your phone. Finally once it says "added" press start. Thats it, good luck!

@non4 said:
Its quite simple. Donwload your region firmware from sammobile or from the firmware thread, open odin 3.07 (later versions have issues). Don't change any settings but do make sure "repartition" is NOT checked as this may cause brick. Click on "pda". Select the firmware you just downloaded. Now boot phone into download mode, I believe its vol down home and power pressed altogether. Dismiss the warning and connect your phone. Finally once it says "added" press start. Thats it, good luck!
Click to expand...
Click to collapse
This is correct.

Is it possible to install a different regions firmware to my S4?

Hey guys quick question before I download and attempt it, I have an Australian i9506 (Cat 4 LTE) but we don't have an official 5.0.1 firmware yet.
Can I just download the Nordic version from http://www.sammobile.com/firmwares/database/GT-I9506/ and install it, or would it brick my phone/radios not work?
Thanks

juzza87 said:
Hey guys quick question before I download and attempt it, I have an Australian i9506 (Cat 4 LTE) but we don't have an official 5.0.1 firmware yet.
Can I just download the Nordic version from http://www.sammobile.com/firmwares/database/GT-I9506/ and install it, or would it brick my phone/radios not work?
Thanks
Click to expand...
Click to collapse
Hi mate,
Yes you can !! it will not brick it , you may have (or not) problems with the modem as maybe is not the best for your region but you can always flash another...
should not be a problem
BACKUP first , nandroid and your EFS Folder, just in case there is a problem

Just to add to the previous suggestion, use Wanam's EFS Backup Tool rather than Samsung Tool, as it not only backs up the EFS partition but the hidden partitions where the IMEI and the modem are stored.

Strephon Alkhalikoi said:
Just to add to the previous suggestion, use Wanam's EFS Backup Tool rather than Samsung Tool, as it not only backs up the EFS partition but the hidden partitions where the IMEI and the modem are stored.
Click to expand...
Click to collapse
+1 mate!!

It also depends if your phone is carrier locked.

Thanks for the advice guys I'm giving it a try now, will edit as I go. My phone is not carrier locked (Voda AU don't lock them fortunately but they provide the codes on their website for free to unlock anyway).
So I downloaded Odin3 3.09 and the firmware I9506XXUDOA6_I9506NEEDOA6_NEE (this is the link from sammobile).
I'm following the instructions I found on another site but it's basically put the phone into download mode (home, power and volume down), agree to enter download mode, in Odin for AP select the .tar.md5, make sure Auto Reboot and F. Time Reset are ticked but not Re-Partition or anything else and start.
EDIT 1: The phone rebooted into recovery and updated something, now the phone is booting with a new boot animation. (for those referring to this I was on the latest AU Voda FW, then updated to CM12 5.0.2).
EDIT 2: After the usual nerve-wracking amount of time of first boot the boot logo finally went away and the usual "optimizing apps" message has come up and it's started (235 apps whoa the bloat). Waiting for that but at least it's working to a point where I can recover it. I just realised it's 6:10AM now and I FORGOT TO MAKE A BACK UP. I hope this works but worse case scenario there's a 4.4.2 Vodafone firmware I could flash and try my luck with if this doesn't work out.
EDIT 3: I'm not sure if it's part of the setup process but the word "UP" then a short progress bar appeared on the screen, now I've got only a black screen with a status bar (4G icon is there but no clock). I have rebooted from the power menu, let's see what's going on here.
EDIT 4: Cache wipe from stock recovery didn't work, trying factory reset from stock recovery. I note that the first time I set up the phone it was plugged into the computer with ODIN still running, I don't think it could have interfered but I unplugged the phone this time just in case.
EDIT 5: I'm not sure if it was ODIN or needing to do a factory reset but it's working now, I'm running through the set up. WiFi is working 100%.
Final EDIT: Everything is working 100%, tested the camera, proximity sensor, screen rotation, voice calls, mobile data, wifi and it's all 100%.

juzza87 said:
Thanks for the advice guys I'm giving it a try now, will edit as I go. My phone is not carrier locked (Voda AU don't lock them fortunately but they provide the codes on their website for free to unlock anyway).
So I downloaded Odin3 3.09 and the firmware I9506XXUDOA6_I9506NEEDOA6_NEE (this is the link from sammobile).
I'm following the instructions I found on another site but it's basically put the phone into download mode (home, power and volume down), agree to enter download mode, in Odin for AP select the .tar.md5, make sure Auto Reboot and F. Time Reset are ticked but not Re-Partition or anything else and start.
EDIT 1: The phone rebooted into recovery and updated something, now the phone is booting with a new boot animation. (for those referring to this I was on the latest AU Voda FW, then updated to CM12 5.0.2).
EDIT 2: After the usual nerve-wracking amount of time of first boot the boot logo finally went away and the usual "optimizing apps" message has come up and it's started (235 apps whoa the bloat). Waiting for that but at least it's working to a point where I can recover it. I just realised it's 6:10AM now and I FORGOT TO MAKE A BACK UP. I hope this works but worse case scenario there's a 4.4.2 Vodafone firmware I could flash and try my luck with if this doesn't work out.
EDIT 3: I'm not sure if it's part of the setup process but the word "UP" then a short progress bar appeared on the screen, now I've got only a black screen with a status bar (4G icon is there but no clock). I have rebooted from the power menu, let's see what's going on here.
EDIT 4: Cache wipe from stock recovery didn't work, trying factory reset from stock recovery. I note that the first time I set up the phone it was plugged into the computer with ODIN still running, I don't think it could have interfered but I unplugged the phone this time just in case.
Click to expand...
Click to collapse
Hi mate
How is it going?
If trouble , do a factory reset and flash it again....

Thanks mate that did the trick!

juzza87 said:
Thanks mate that did the trick!
Click to expand...
Click to collapse
glad to hear it mate, you did it!!
Thanks for let in us know.

For any other Aussies out there trying this I'm on day two and everything is working perfectly, getting root is super easy too, just use Odin to flash a custom recovery (Solk's CWM from May 2014 works great), boot into the recovery and install UPDATE-SuperSU-v2.45.zip, exit and when it asks if you want to repair root say yes. Reboot, go to the play store, update to the latest SuperSU and all is well.

Yotaphone 2 reboots by itself after after the screen switches off.

Hello
I have a Yotaphone 2 running android 5.0. I have a huge problem with the device which is, that the phone reboots automatically all by itself after the screen turns off. The screen timeout is set at 1 minute and once the screen goes off, the phone reboots! I don't know what the problem is but its making me crazy!
Note: The phone does not reboot if the screen doesn't turn off. So I changed the screen timeout to 30minutes. Also note that Wi-Fi doesn't start immediately. It doesn't even start most of the time and is stuck at "turning on"! And also, the phone isn't detecting my SIM Card!
Hope someone can solve my problem.

Wow, seems a lot of problems here. However you provided very few info about your phone.
1) Where did you buy it?
2) What have you done after you opened it, OTA? Which firmware was installed?
3) Have you tried factory reset by wiping data in the stock recovery? (Accessible with Vol+ and Power)
4) Have you tried to flash from scratch the RU .124 firmware with YotaFlasher?
5) The phone was behaving normally before or it's doing this as soon as you started using it?

I got the phone as a gift
TheArt. said:
Wow, seems a lot of problems here. However you provided very few info about your phone.
1) Where did you buy it?
2) What have you done after you opened it, OTA? Which firmware was installed?
3) Have you tried factory reset by wiping data in the stock recovery? (Accessible with Vol+ and Power)
4) Have you tried to flash from scratch the RU .124 firmware with YotaFlasher?
5) The phone was behaving normally before or it's doing this as soon as you started using it?
Click to expand...
Click to collapse
-The phone was a gift from "Aramex Company".
-Yes, I have factory reset it! Note: It wasn't possible to reset it from settings because it would always get stuck in "Shutting Down" phase and nothing would happen. So I hard reset it.
-I found something strange going on though. Whenever I reset it, It would restart (after the reset is over) and say that "ANDROID IS UPGRADED TO 5.0".
I think it is upgrading by itself to 5.0.
-No, I haven't tried any flashing.
-Yes, the phone was working fine for a while and then started behaving like this!
Cheers!
(Thank You for your support and attention by the way)

Video
Hello!
I have made a video showing what the problems are! Please give me your e-mail so that I can send you the "Dropbox" link to the video.
Thank You!

I think the first thing to do here is to flash a clean firmware (RU or EU) on your phone via YotaFlasher, search here on xda how, and then report back if it's happen again! Seems that the firmware it was shipped with wansn't so stable.

Flashed it!
TheArt. said:
I think the first thing to do here is to flash a clean firmware (RU or EU) on your phone via YotaFlasher, search here on xda how, and then report back if it's happen again! Seems that the firmware it was shipped with wansn't so stable.
Click to expand...
Click to collapse
Hey!
As you had prescribed, I flashed it! First I flashed it with Android 5.0.0-ME1.1.60 and after opening the phone I used it for a while and the phone was same as before flashing! There was no difference at all! The phone was restarting on turning screen off as usual, the WiFi wasn't turning on, and the SIM wasn't being recognized!
But then I flashed it with Android 4.4.3-S01-003-ME1.0.3.61a and the phone is still rebooting by itself upon switching the screen off and the WiFi problem still persists! The WiFi just simply won't turn on. It's stuck at "turning on"! The SIM isn't recognized either! Also, the phone is restarting from the inside now (It wasn't restarting before. I had to keep the power button pressed every time I wanted to restart)! But NOTE that the phone still cannot be just shut down, it can only be restarted!
I don't know what to do!
Cheers

can you please help me find 4.4.3-S01-003-ME1.0.3.61a firmware. i tried yotaflasher and i cant make the program work. it exits close itself. i couldnt find any firmware folder in yotadevices ftp too. can you help me found the spesific firmware please?

Why are you unable to make yotaflasher work
lgk350tr said:
can you please help me find 4.4.3-S01-003-ME1.0.3.61a firmware. i tried yotaflasher and i cant make the program work. it exits close itself. i couldnt find any firmware folder in yotadevices ftp too. can you help me found the spesific firmware please?
Click to expand...
Click to collapse
Hi lgk350tr,
Why are you unable to make yotaflasher work, it is a pretty simple application. Have you tried to see instruction videos on YouTube on how to use it? Instructions are also available on XDA Developers' website. ( https://forum.xda-developers.com/yotaphone-one/general/yota-flasher-download-t3480922 )
Don't hesitate to contact, for any problem!
Cheerio

Please help..................I spent 800 USD on this phone and I can't use it
Can someone freaking help me with my phone's problem, I have spent 800 US Dollars buying that phone, and I can't even use it! It has been 6 months since I opened this thread and no one has helped me yet!
PLEASE HELP..............................................................:crying::crying::crying:

akahomeacc said:
Can someone freaking help me with my phone's problem, I have spent 800 US Dollars buying that phone, and I can't even use it! It has been 6 months since I opened this thread and no one has helped me yet!
PLEASE HELP..............................................................:crying::crying::crying:
Click to expand...
Click to collapse
Try flashing the hybrid modem mentioned in the general guide (Part 2).
Try flashing 2 times before rebooting.
If nothing helps, you could try lineageos, @angelll123 made a lengthy guide how to that in the post quoted here , also check my comment.

Is this what you mean?
tomgaga said:
Try flashing the hybrid modem mentioned in the general guide (Part 2).
Try flashing 2 times before rebooting.
If nothing helps, you could try lineageos, @angelll123 made a lengthy guide how to that in the post quoted here , also check my comment.
Click to expand...
Click to collapse
I have attached a screenshot of the Yotaphone 2 General guide page, I want to know if you are referring to the text that I highlighted in the screenshot!
Thank You

I do experience similar issue, but only recently. I haven't done anything like flashing or upgrading my phone, it started by itself .
I am experiencing reboots whenever battery drops below about two thirds of its capacity. Also, charging and handling some load prevents this.
Note that my Yotaphone has both displays damaged. Still working though.

Sm-g955f bricked - flashing stock firmware only made it worse

Hi All,
So, I have spent 2 days trying to get my Galaxy s8+ back to normal. However, I seem to only have made it worse. It all happened when I decided to change the /data partition from ext4 to another format and then back again to get the /data partition to mount in TWRP after flashing Pascal Rom. However when I rebooted, nothing worked, no boot up screen, no recovery, no life, but all I could get was download mode. It then must of froze up after another restart and I couldn't get anything for 12 hours or so.
The next step I tried once i got download mode again was to flash stock firmware for the G955F, I can't remember the version of this firmware, but I still had nothing change. So then i flashed the latest firmware from SamFirm's downloading client, which was G955FXXU2CRF7 - Australian Optus Branded Firmware (OPS). I was able to get as far as the "hello start screen" and then my phone restarted, it then tried to upgrade my system again, then started "erasing" and then it rebooted and I still had the same issue, nothing but download mode and still no recovery, it still wouldn't turn on. So I flashed the latest International/Unbranded Australian firmware (XSA) - G955FXXU3CRGH, still the same result. I now can't go back to the OPS version of firmware because I get the Check error with the bootloader (since it's a more recent version), so I can't go backwards. I also can only flash "Official Binaries" now. Oh and to make things worse, I read that Odin Option "Nand Erase" just erased user data, so I thought I might as well try it, and as a result, I now can't flash even the (XSA) firmware because of ODIN failing and I now have an "An Error has Occurred while updating the device software. Use the emergency recovery function in the smart switch PC Software.". I am a bloody idiot :good: . Oh, I have tried multiple versions of Both Samsung Kies & Smart Switch (Which both had the option for "recovery & initialisation"), however, I get a message that my device is unsupported after adding in my device model and S/N. I tried a PIT file and then found out it's now included in all the latest firmware img files.. so yeah lol. Fun times. Soooo I feel like I am out of Options, nothing I do is working. The worst of all this is my wife is not happy haha which means after years of tinkering with android phones (flashing custom ROMS, Kernels, Root Solutions, e.c.t ), this may be the end of the road for me if I can't fix this phone. I really hope this thread isn't true too : https://forum.xda-developers.com/galaxy-s8+/help/sm-g955fd-access-download-mode-t3748228
So Please, someone help me out if it is at all fixable even if it requires opening the phone up lol.
The stats i have on download mode are the following:
RMM State as Prenormal
OEM Lock: OFF
FRP Lock: OFF
CARRIER_ID: OPS (which is super weird because it only accepts XSA to be flashed :S )
Secure download: Enabled
System Status: Custom
Warranty Void: 1
Current Binary: Samsun Official
If you need more, just let me know.

Ok, quick update: I have got rid of the error that I mentioned. I managed to flash XSA firmware again, it went to the blue Andriod is updating the system screen, then started "erasing" then rebooted and nothing again, still only download mode available. Nothing happens when I try to turn it on or try recovery mode.

This firmware you mentioned XSA - G955FXXU3CRGH i would double check. As far as I know Australia doesn't have a version 3 bootloader yet whether unbranded.telstra or Optus.

Quick Update: Maybe Fixed now!
Even though no one has replied yet, as it's only been an hour or so. I just wanted to let anyone else know who is experiencing a similar issue in the future on how to possibly fix it.
This was a real nightmare, however quick disclaimer, I am not responsible for any damage incurred to your device/property by following my instructions.
So the way I have fixed it, is I flashed the AP file only (from the firmware zip i had downloaded from SamFirm) with "Auto Reboot" Off. When ODIN finished, I held the Vol Down + power button, to reset it. It gave me a blue "No Command" Screen, I then waited and it then went black and the recovery screen appeared. I cleared the cache, rebooted to bootloader, which it didn't turn back on, so I left it because I thought it was the same thing. Came back 10 mins later and turned it on (or hard restarted, can't remember) and it worked. It booted!
I did soon learn it looks like it was having a charging problem because it had no charge and kept telling me there was water in the port (even though it was dry), I restarted it again after putting it on a wireless charging pad and it is seeming fine so far with the USB charger. So big note to anyone in the future, that it could be possibly bugging out with charging as well if you can't get it back on. I did have the device tell me here and there the last two days that there was water in the port when it was off. So kinda weird.
I know this all sounds a little hocus pocus, superstitious almost, but hey, my phone is working, so maybe replicating my actions may just help lol. :cyclops:

spawnlives said:
This firmware you mentioned XSA - G955FXXU3CRGH i would double check. As far as I know Australia doesn't have a version 3 bootloader yet whether unbranded.telstra or Optus.
Click to expand...
Click to collapse
Oh right, well, I did hear that SamFirm is not supported anymore, as that's where that firmware came from. Maybe it's dishing out incorrect firmware now? Possible the structure of where ever it is getting its firmware from (pretty sure it's pulled from samsung) has possibly been altered?

Just for reference I use www.updato.com for downloading firmware it is usually up to date. No reference to the firmware you mentioned (not for Australia anyway)

The screenshot I took: Imgur link:
https://imgur.com/a/lqyzWW7

Interesting I'll keep a lookout for it. Still on nougat 7.0 (XSA) no plans to upgrade yet until some issues are fully resolved ( out of beta stage that is ).

spawnlives said:
Interesting I'll keep a lookout for it. Still on nougat 7.0 (XSA) no plans to upgrade yet until some issues are fully resolved ( out of beta stage that is ).
Click to expand...
Click to collapse
Yeah, it's seeming to work now, but my fast charge isn't working. However, my other oreo ROM didn't work with fast charge either. So i am unsure if it is my phone or an orio bug :/ lol

Well at least you got it working and not using as a door stop

that was really sad story man.....

spawnlives said:
Well at least you got it working and not using as a door stop
Click to expand...
Click to collapse
Yeah haha, so glad it's not a door stop haha

Flashing ROM help on Samsung S8

Hello Everyone,
First of all I am a newbie when it comes to Android, so forgive me for asking such a noob question.
So here is the story, my girlfriend's dad passed away few months ago. He used an old Samsung S8, sadly we do not know what the login pattern is or his Google account password (We did try recovery options but to no avail)
As there was no other option, I went ahead and had the phone factory reset, and from what I learned the phone is now FRP locked.
After a reading a few more guides I downloaded a tool called Odin and some 'Stock ROM' and flashed it hoping that would resolve the issue (Oh boy, how wrong I was) and the phone is now stuck on a screen saying "Error occurred while updating the device software, use the emergency recovery function"
My girlfriend just wanted to be able to use it for some time, and now I feel really bad for screwing it up.
Just wondering what my options are and if the phone is salvageable at all?

Hey, are you sure you downloaded the right ROM for this S8? Since there are two models of this phone, each with a different chipset (Exynos / Qualcomm Snapdragon). I feel like this error could come from a bad firmware? Does Odin still see the phone when you connect it to the PC?
Edit: Apparently people solved this problem using Samsung's Smart Switch on PC.

Yes, I think I downloaded the correct one. The phone is from Telstra Australia and so downloaded the ROM from Samfrew that was listed as Telstra, I typed in the model number which is SM-G950F it is this firmware that came up.
Yes when I put the phone into Recovery mode and connect to PC, Odin detects it, but the flash gets stuck halfway. I've loaded the BL, AP, CP and CSC that came within the ZIP file from Samfrew and under options only ticked 'Auto Reboot' and 'F.Reset Time'
Also tried just with the BL and AP but same deal.

blackslash said:
Also tried just with the BL and AP but same deal.
Click to expand...
Click to collapse
Have you tried Samsung's Smart Switch app on PC? Apparently people successfuly fixed this error with it.

blackslash said:
Also tried just with the BL and AP but same deal.
Click to expand...
Click to collapse
I've never had to deal with a Samsung that has a FRP lock, that could just be the reason why the flashing fails, i wouldn't know. I hope you can get the Factory Reset to work :/

Also tried the Smart Switch app but it would recognize the phone. Thank you for looking into this.

You could send a message to this user "makeyourself" : https://forum.xda-developers.com/t/i-think-i-screwed-the-pooch-on-this-one.3939572/post-79729654 , he seems aware about the FRP locks / flashing issues.
Good luck with your S8.

@Derbi75 thanks heaps, will message makeyourself now.

Ideas? Anyone?

blackslash said:
Ideas? Anyone?
Click to expand...
Click to collapse
From what I know, the error only appears if the phone was interrupted during flashing. Such as, Odin was writing into phone but you probably removed the USB or stuff. The screen you see is actually download mode. It is just renamed. Try plugging in your device when it's on the error screen then re-flash it.