Database Users

[Q] FRG83D update on a rooted N1

Hi all, I'm quite new to this forum and I hope I dont break any netiquette with my question.
Now I have a N1 I bought on ebay, used, rooted and perfectly functioning.
I don't remember how, but I was able to update it to FRG83D downloading the rom, renaming it, copying on my sdcard etc ...
Now ...
I can't update to FRG83D.
I understood that having a rooted N1 NO OTA UPDATE shall ever work for me, not the manual update is available.
I was able to skip the "no signature verification" error suing clockwork mod, but i can't install the patch anyway, the system alway replies "assert failed: apply_patch_ckeck (" stystem app accountandsyncsetting . apk" ... then a serie of letters and number follows.
I know nothing about this, I must confess, but my suspect is that the update fails because something doesn't match between the update and the ROM which is working on my N1 (which is by the way the original one build frg83d
baseband version
32.36.00.28U_4.06.00.12_7
kernel
2.6.32.9-27240-gbca5320 android-build apa26 #1
Any sugestion ?
I mean and idea about where I can download a FRG83D version suitable for my phone ?

If you just want stock with very little tweaks, may i suggest Geo's Rom. It's basically the latest stock rom w/ superuser, busybox, trackball alert etc. Runs amazing too =)
As for breaking any netiquette, you're suppose to post this in the questions forum not the general. Have fun with your phone.

worked!
Thanks Mokurex!
It worked.
It's unbelievable.
I spent three nights in search of an answer, and then you solved it in few seconds.
I'm new to Android, and I must confess that I'm quite disoriented.
There hare hundred of versions, produced by individuals, companies, etc ... The one I used, I mean the one you suggested me, seems to be the fruit of an individual's work in the US.
It's ok to me, sounds and works good.
But It's not the original one, I mean the one released by ... Google ? or ... what ?
It doesn't matter, but I just want to say that it would be easier for us all, newbies, to have some clear guidelines on this, an online guide for dummies, something or somebody who would explain us the difference between a odexed or deodexed versions, what are the pro and cons of rooting a N1, the fact that rooted phones loose the OTA update (which is very VERY painful for us newbies, etc ...).
I understand that we can rely of forums and on kind people like you, but having some clear cut guidelines would be very useful.
... and looking at the future ... I guess I'll have the same problems when I'll have to update to Gingerbread.
I's very frustrating to search the web for a suitable ROM for your phone ...

stefanopelloni said:
[snip]
But It's not the original one, I mean the one released by ... Google ? or ... what ?
Click to expand...
Click to collapse
No, it's not the original. That one is deodexed, so any future OTA updates will not work (as Google's stock ROMs and updates and not de-odexed). You will have to wait until someone repacks the update, then apply it.
stefanopelloni said:
[snip]
It doesn't matter, but I just want to say that it would be easier for us all, newbies, to have some clear guidelines on this, an online guide for dummies, something or somebody who would explain us the difference between a odexed or deodexed versions, what are the pro and cons of rooting a N1,
Click to expand...
Click to collapse
Did you read the wiki? There are lots of posts/threads/guides available.
stefanopelloni said:
[snip]
the fact that rooted phones loose the OTA update (which is very VERY painful for us newbies, etc ...).
Click to expand...
Click to collapse
What are you trying to say? Phones running a rooted, but otherwise stock ROM will certainly received the OTA updates. Now if you use a non-stock ROM, you may or may not receive the OTA update. But whether you receive it or not, you will not be able to apply it as is, until someone repacks it (unless you are using the stock ROM, rooted or not).

I believe you have to use the stock recovery as well if you wanted to update via OTA.
If you want to get Gingerbread by way of OTA, then revert to stock rom and recovery. Everything you need is in the sticked thread in the development section.

Mokurex said:
I believe you have to use the stock recovery as well if you wanted to update via OTA.
[snip]
Click to expand...
Click to collapse
No, you do not. You just need a newer version of Amon_RA (1.9+) or CWM.

Thank you for the correction.

Efrant, Mokurex,
perhaps it's my problem.
My original plan was to restore my phone is a status capable of receiving OTA updates. Considering that I'm not an IT expert it would be easier for me ho have such a phone.
Wandering on the web, I discovered that rooted phones are not eligible for OTA updates.
And most important of all, I'm not eligible to manually update is as well using the patches on the net (signature verification errors ... and many others seen above).
Mokurex helped me a lot (actually, solved my problem by now) suggesting that version of the ROM (I mean Geo's one) but it's the fruit of a work of an individual. I'm very grateful to him as well, but who knows about the future. Will Geo provide a similar version of Gingerbread as well ? Because without him I can't upgrade.
Efrant, got your remark.
I have CWM, latest version, I also bought the premium version (in oder to show to the programmer of it my appreciation) but in my case it just doesn't work.
With it, I can bypass the signature issue, but then I got stuck at assert failed: apply_patch_ckeck (" stystem app accountandsyncsetting . apk
Oh, by the way, I also tried to go back to ERE27 or something like that (unrooted version etc ...) but the mobile just doesn't work at all ...
I understood that the only way to unroot my phone (actually, any phone) and qualify for the OTA is via SDK.
... but I'm afraid it's just a bridge too far for my poor knowledge.

Geo has been quick to update his rom to the newest version. To upgrade to gingerbread, i'd assume that it would be like flashing any other custom rom, but there might be a bit more steps involved.
If you want completely stock, no root whatsoever, go here.

stefanopelloni said:
[snip]
Wandering on the web, I discovered that rooted phones are not eligible for OTA updates.
And most important of all, I'm not eligible to manually update is as well using the patches on the net (signature verification errors ... and many others seen above).
Click to expand...
Click to collapse
I said it before, and I'll say it again: rooting has no bearing on the phone's ability to receive and install OTA updates -- what matters is which ROM you have. I rooted my phone when I bought it, and it had Eclair on it. I have received EVERY OTA update without any problem.
stefanopelloni said:
[snip]
Efrant, got your remark.
I have CWM, latest version, I also bought the premium version (in oder to show to the programmer of it my appreciation) but in my case it just doesn't work.
With it, I can bypass the signature issue, but then I got stuck at assert failed: apply_patch_ckeck (" stystem app accountandsyncsetting . apk
Click to expand...
Click to collapse
That is probably because you were not using a stock ROM...
stefanopelloni said:
Oh, by the way, I also tried to go back to ERE27 or something like that (unrooted version etc ...) but the mobile just doesn't work at all ...
I understood that the only way to unroot my phone (actually, any phone) and qualify for the OTA is via SDK.
... but I'm afraid it's just a bridge too far for my poor knowledge.
Click to expand...
Click to collapse
If you want a stock ROM, you can go here: http://developer.htc.com and download a Nexus One image to your sdcard, rename it to PASSIMG.zip and boot the phone into bootloader (by holding the trackball and powering up the phone). It should automatically detect the file and allow you to flash it.
Files from the site are official. If you get them from anywhere else, you can't really know what's been modified.

Dear Efrant,
if you were a girl, and in Italy, I would probably kiss you.
Now I have a bright-clear picture of the situation.
During the next holiday, I'll try and flash a stock version of the OS and then try the OTA update.
By now, the version mokurex suggested me work brilliantly and after so many nights wasted in a desperate search of an answer my myself i'm going to have a break.
... but thanks a lot. thanks indeed !!!

Sorry to disturb you again Eftant.
The fact is that today decided eventually to follow your step, but encountered another unexpected problem.
downolaed the original HTC rom - done
renamed it passimg.zip - done
turned on the N1 pressing trackball - done
expected detection of PASSIMG.zip - done
opening passimg.zip - done
checking passimg.zip - done
and then .. nothing
once the N1 load the passimg.zip file (i notice it from a loading bar on the upper right conder of the phone) it just allow me to
1)run bootloader agan
2) lock sim
3) restore something ...
... and that !
No possibility to "flash" rom as you wrote.
Did I miss anything ?
I see from the web that a lot of people bring back the N1 to the stock image using SDK from PC (MAC in my case) but the steps are not so clear considering the fact that I'm not that comfortable with the shell and the Android SDK is not intuitive (... to me).
Thanks in any case for your attention!

Try wiping your device then download the FRF91 image from the same site, rename it to PASSIMG.zip and save it to the root of your sdcard. Put your sdcard back into your device, and boot into the bootloader (by holding down the trackball as you push the power button). Once it flashes, wait for the OTA to FRG83G. Some users have said that the later images don't work using, particularly if you have updated to the 0.35 version of the bootloader.

atrix uk orange bootloop help

hey all got my atrix a week ago very happy with it managed to root it and thought i would take the plunge in flashing gingerblur 3.1 to it today
all seemed to go well untill reboot and now i seem to be stuck with a red flashing led and rebooting i did however make a backup of my stock rom if it helps
currently i cant do anything softbriced i think
any help on this would be great i am new to all this
uk atrix on orange network

well for any uk users who might come across the same issues i booted into fast boot recovery selected android recovery with volume buttons
which brought up an picture of droid and escelation mark tapped the bottom right hand corner to show on screen menu and selected factory restore and it fixed my bootloop issue.
now im sucsesfully running gingerbreak
i then used titanium backup restored my apps everything is good now
only issue is i cant change my deafult lock code and the finger print settings crash kinda stuck with a pin lock everytime it sleeps

nice one, good to know a orange atrix can use these roms, did you follow the exact same process or did you have to do anything different to the instructions provided?
also mine is stuck in a boot loot with the red led, but factory reset didnt fix it waiting for orange to get more stock for exchange

just followed the instuctions as posted from other users and read a few guides from here for days on end im wondering myself if there are any custom roms based on uk phone releases

No roms based for uk phones as yet as we run a diffrent software version than any of the other out,the only way it will work at a guess it to load a stock rom of a higher version from a at&t or bell one and then use a custom rom based for them, at the mo i am not going try it as we have no way to recover a full brick,you can always try and edit your own rom,this phone is nothing like the htc ones we all love to play with.

lonegunman said:
No roms based for uk phones as yet as we run a diffrent software version than any of the other out,the only way it will work at a guess it to load a stock rom of a higher version from a at&t or bell one and then use a custom rom based for them, at the mo i am not going try it as we have no way to recover a full brick,you can always try and edit your own rom,this phone is nothing like the htc ones we all love to play with.
Click to expand...
Click to collapse
just so ya know the 2.1.1 that has leaked works perfectly and you can flash greyblur over it however it breaks data so i would bother for now but yeah it seems pretty safe, both me and chuckyd have flashed successfully

Thats is good news, can you explian more about the data breaks?

lonegunman said:
Thats is good news, can you explian more about the data breaks?
Click to expand...
Click to collapse
its pretty weird, for me it seemed to work fine after i flashed, but then after rebooting later in the day, i couldnt get data to work regardless of what i did, it appeared to work with roaming enabled but i guess leaving that on isnt a great idea. hopefully its something small that ken could fix for us uk users as going from greyblur is a lot nicer overall, i found the honeycomb music player a bit slow though so ive installed playerpro

Have you got the right apn details? also have the radio rom changed?

Atrix in the UK
Hi Folks, I have had an Atrix for three months now and it works brilliantly in the UK with the following setup. Gingerblur 3.1 (based on android 2.2.2 with the system version 4.1.83.(latest avail) The only slight problem you might have is with the radio rom and thats easily fixed.(pm me for details) Also fully recoverable if required.

Ok, is it a new radio rom file?

Compass and Sensors - Hardware or Software problems?

A while back, just before the 2.2 OTA update came out for ATT locked streaks I received a replacement streak from dell. I didn't have it long enough before I applied the update to remember if the compass or sensors were working, but I seem to remember the screen would auto rotate just fine.
After the update the screen would not auto rotate at all. I spent a while looking into fixing it, trying things like srchild.com's calibrate-sensor-on-upside-down-dell-streak-after-froyo-22-android-upgrade
But I have a slightly different version of the menu's than that tutorial shows and nothing I did fixed the auto rotate so I eventually just learned to live with it in landscape mode for a while.
Now I realize that no compass or sensor based apps work. I've installed sensor monitor apps and they show no data. The "Calibration" application that shows bubble levels doesn't move at all. I'm starting to think it is a hardware problem but like I said, I am almost sure that screen rotation worked before the upgrade on this device.
Is there a way to verify for sure before calling dell. Their support was a nightmare to deal with the first time.
TIA

Why go through the trouble? Why not root your Streak and flash a custom ROM. They perform much better.
If you don't like them then you could always use the QDL tool to get back to stock but everyone here knows the OTA updates wreak havoc for almost all Android devices

cdzo72 said:
Why go through the trouble? Why not root your Streak and flash a custom ROM. They perform much better.
If you don't like them then you could always use the QDL tool to get back to stock but everyone here knows the OTA updates wreak havoc for almost all Android devices
Click to expand...
Click to collapse
A new ROM, stock or custom, won't fix the problem if there is a hardware issue. Installing a different ROM might help troubleshoot the problem. I would suggest a stock ROM so that if the problem persists there is no questions concerning the warranty. 353 is the latest AT&T ROM and can be downloaded here.
You don't have to root and then install StreakDroid, you can install SD without rooting first.
The updates I have gotten for the Streak have been excellent. I run Stock 351. My streak was purchased unlocked from Dell. In addition the OTA update I got for my Moto Backflip was a huge improvement and the update on my wife's Inspire that enabled the setting to install non-market apps works fine. I would have to say that not everyone here agrees with your assessment of the OTA updates.
To the opening poster I would suggest a reset or reinstall of 353 and then test with no apps installed.

I should've specified the OTAs from DELL are notorious for causing issues.
And you are correct, not everyone here would agree with them, but if you like to tweak and play, then a stock ROM doesn't offer much flexibility, not to mention performance wise.
When I first got my Streak I bricked it, then I revived it with the QDL tool and then went to StreakDroid. Then I even went back to stock to have a baseline to compare with the StreakDroid beta I'm currently using, and I have to say, stock is just that, stock, it's two worlds, performance and battery on stock just don't compare to any of the custom ROMs.
I know this isn't the place for this discussion but I couldn't help but make my point. If you like the stock ROM, I'm happy for you, but I for one have never been much to settle for less, I'm always looking for the latest thing.

Having not looked into updating android a great deal I'd appreciate any corrections if I'm mistaken on this, but I do believe the over the air update that was installed is the 353 version.
My Streak currently reads:
Baseband version: GAUSB1A135331-US
Build number 15697
marvin02 if you still think downloading and installing the the 353 ROM you linked to would help diagnose the issue I'd be more than happy to, please let me know.
cdzo72 I do plan on installing custom rom's and even getting into Android development in the near future but I do not have time for it yet. I would like to make sure I do not have a hardware problem before installing any custom rom's because it will be easier (less time consuming for me) to make a warranty claim if I need to. Unfortunately right now functional and limited is better than cutting edge and time consuming for me when it comes to my Streak.

data_loss said:
. . .
My Streak currently reads:
Baseband version: GAUSB1A135331-US
Build number 15697
marvin02 if you still think downloading and installing the the 353 ROM you linked to would help diagnose the issue I'd be more than happy to, please let me know.
. . .
Click to expand...
Click to collapse
A fresh install would eliminate (mostly) the possibility that your problem is caused by software, not hardware. If you still have the stock recovery on your phone you can just download the .pkg file, put it on your SD Card, rename it to update.pkg and boot into recovery to install.

I do still have the stock recovery.
I downloaded and installed the 353 ROM. It appears that the sensors are not working (no auto screen rotation). I also tried a factory reset after the update just for giggles, no change.
If I'm not mistaken the Streak_104_4399_21.pkg that can be downloaded from the streakdroid site is the official att&t 1.6 ROM. Would it be worth downloading and downgrading to that to test?
Or at this point do I just endure the call to dell support?

Is there any kind of documentation available for the fastboot menu on the streak? There seems to be options available for sensor stuff in there but I don't want to be just clicking through them without knowing what they do.

One hour on the phone ( which was not much fun ) and a couple days later and I have a replacement. It is a refurb, but in good condition and it works. Thanks all for the help.
Sent from my Dell Streak using XDA App

Flash Chinese Rom on Honor 7EU

Hi to all,
Ive been reading a lot this forum, and i find the chinese version more complete, so my question is simple.
¿is it possible to flash a chinese rom? I like chinese features, and i read it gets more updates.
My only worries are warranty and to lose european radio bands.
Any help?

Give it a try and let us know how you get on....;0)

Thanks for your message sheridan2000,
I'm a newie, until now I only had a nexus 4, wich have a huge community, I don't know how to do if for this new phone I just received, and I'm worried about the warranty, about brick if and if is possible get back to EU flash rom.
My abilities are limited, and with my lack of knowledge I feel is too risky.
If some one with experience can bring some information would be great.
Regards,

Just kidding fella, think at this early stage in developement best not to flash any roms not intended for the EU version as may mess up your phone. When we get a fully working ROOT and TWRP then there will be some safety in doing so....

sheridan2000 said:
Just kidding fella, think at this early stage in developement best not to flash any roms not intended for the EU version as may mess up your phone. When we get a fully working ROOT and TWRP then there will be some safety in doing so....
Click to expand...
Click to collapse
Agree with him! When we get a stable and well working custom recovery, I think people will mod the Honor 7 more.
Any why do you want the chinese version? I tried a chinese MIUI rom on my Honor 6, and the all the chinese stuff drove me crazy so I had to roll back to a normal EU rom...

kjettern said:
Agree with him! When we get a stable and well working custom recovery, I think people will mod the Honor 7 more.
Any why do you want the chinese version? I tried a chinese MIUI rom on my Honor 6, and the all the chinese stuff drove me crazy so I had to roll back to a normal EU rom...
Click to expand...
Click to collapse
Hi!
I feel like chinese rom is more "updated" I think european version is more "conservative" as they might try to secure the user experience. Chinese rom gets much more updates, Ive read something about huawei idchanger; Chinese rom also have more options like recording call, navigation shortcuts, youtube bloat window and download...
In nexus we could chose wich part of the rom we would like to flash, is that posible in this huawei? What I have thought is what about flash the Chinese rom, without flash the radio baseband in order to keep the compatibility with european LTE bands. Any idea??

juanrasmd said:
Thanks for your message sheridan2000,
I'm a newie, until now I only had a nexus 4, wich have a huge community, I don't know how to do if for this new phone I just received, and I'm worried about the warranty, about brick if and if is possible get back to EU flash rom.
My abilities are limited, and with my lack of knowledge I feel is too risky.
If some one with experience can bring some information would be great.
Regards,
Click to expand...
Click to collapse
I did this on my european honor 6 plus. DO NOT DO IT.
No way to get back to european firmware. But was probably because officallollipop was not out yet. More hassle than it was worth. Voided warrenty also. DO NOT ATTEMPT

Thank you for your usefull feedback.
I hope soon someone finds a safe way to run and revert back this kind of test.
Regards,

nazzy90 said:
I did this on my european honor 6 plus. DO NOT DO IT.
No way to get back to european firmware. But was probably because officallollipop was not out yet. More hassle than it was worth. Voided warrenty also. DO NOT ATTEMPT
Click to expand...
Click to collapse
One question: you had the complete nandroid backup and you couldn't flashed it after experimenting with the Chinese ROM over EU? How far did you get then or where did you stuck when trying to reverse?
I never had EU Honor 7, but my personal opinion is that before playing with different roms, you should be perfectly aware what are you doing and what do you want to achieve. Changing hardware is out of the question and probably is the same with drivers. At least to the point when a real custom rom appears. As I mentioned there are some modifications of Chinese roms already available as a flashable zip, which don't alternate baseband or kernel in general, but they are customized to particular roms. Flashing any of them on EU rom could be safe only if you can get back in the case anything goes wrong. Otherwise, if you just need a particular system application, you can always try to push it to the system with appropriate file manager and stay safe as long as you have the nandroid backup.

Nandroid backup did not work through twrp.
Chinese rom was fine but was a developer edition.
Phone can not go back to kitkat from chinese lollipop.
Tried offical downgrade package. Did not work.
Tried back up many times. Did not work.
Chinese emui site takes hours to load and most of the time fails through multiple browsers.
Dont waste your life.
I was still in my 14 day return so exhange by my network to honor 7
Never messing with a huawei phone again where there is little to no support

i had tried chinese rom PLK-U00 which is DUAL 4G as per claim by Honor China, what i do is i extract out the boot&recovery&system&cache&userdata img from the update.app (using huawei tools) then flash it under fastboot, it will boot & load to "Android is upgrading" but after the progress finish it restart itself and repeat the "android is upgrading" progress

I've tried the same with 5.1.1 ply-tl01h rom. I get the bootloop with boot and system flashed and almost get to the home screen using the boot from the 121 firmware

Hi,
I hope you could find a way. I know there are chinese roms available, but hard to find and understand, we might ask them in english then they might help us.
I hope you could fix your phone

Hello Guys,
I bought my Honor 7 yesterday, and this is the model number -- PLK-L01C636B120
I tried to update to B121 or B130 or 140, All of them failed.
As I read my device model is Malaysia not Europe, So Can I flash Europe Stock ROM and flash all the updates?

Muhammad Rihawi said:
Can I flash Europe Stock ROM and flash all the updates?
Click to expand...
Click to collapse
NO i don’t think so! You should do not do that, because there are some differences between both firmwares. Pre-defaults for the mobil-net (modem drivers) ; LTE specifications; maybe some functions like recording during a call etc.
Edit: @Muhammad Rihawi have tried it and it seems to work. But i dont’t recommand it anyway!

non-toxic said:
NO i don’t think so! You should do not do that, because there are some differences between both firmwares. Pre-defaults for the mobil-net (modem drivers) ; LTE specifications; maybe some functions like recording during a call etc.
Click to expand...
Click to collapse
Actually I did it already , and now I'm using Marshmallow Europe B313 BETA.

hello,
could anyone advise me on how to flash Chinese custom rom coz currently my unit is also chinese PLK-AL10C92B190....

its possible with Honor multi-tool. Debrand your phone. But 64 to 32 and 32 to 64 not tested. I have PLK-L01 and I debrand it to PLK-TL01H. I recieved OTA and installing it well.

Muhammad Rihawi said:
Actually I did it already , and now I'm using Marshmallow Europe B313 BETA.
Click to expand...
Click to collapse
how’s about NFC?

non-toxic said:
how’s about NFC?
Click to expand...
Click to collapse
NFC has only PLK-AL10 (64 gb version)

Ticwatch Pro 4G/LTE (Catshark) [US -> EU]

Hi, I have a Ticwatch Pro 4G/LTE (Catshark) [USA]. Do you know if it is possible to flash the EU stock firmware? I find so many comments here in the blog but, after a long research, seems I didn't fine a final answer to that
Can someone highlight me if was able to do the "conversion". For sure EU firmware seems is still getting updated, while US one no
Thank you!

mr-mauro said:
Hi, I have a Ticwatch Pro 4G/LTE (Catshark) [USA]. Do you know if it is possible to flash the EU stock firmware? I find so many comments here in the blog but, after a long research, seems I didn't fine a final answer to that
Can someone highlight me if was able to do the "conversion". For sure EU firmware seems is still getting updated, while US one no
Thank you!
Click to expand...
Click to collapse
Its not possible, I tried. Did you get the custom rom to boot on the your Ticwatch? I have the same one and I seem to not get it to boot without flashing the stock kernel! Any info is mush appreciated!

JedidroidX said:
Its not possible, I tried. Did you get the custom rom to boot on the your Ticwatch? I have the same one and I seem to not get it to boot without flashing the stock kernel! Any info is mush appreciated!
Click to expand...
Click to collapse
I don't mean to say you are wrong but to share my experience. September of 2021 I got a TicWatch Pro 4G (catshark) and I live in the US. Brand new, but I can not tell you what firmware it came with. I flashed the U.S.A rom the moment the battery got to 50%, lol. I had nothing but issues. I flashed everything over and over. I think I could win a TickWatch setup Speedrun by now, I should summit my time. I made a bash script to automate the whole flashing process because I was tired of it.
I was out of ideas. I said "F it" nothing left to flash but the EU version. To my surprise it works perfectly, even data with Verizon, text, everything works for me, even Majisk. Flash Magisk 20.4 and you can install some modules. It's all kinda pointless on a watch though
I know the question is old by now but maybe it will help someone out just getting a TicWatch.

Gregbmil1 said:
I don't mean to say you are wrong but to share my experience. September of 2021 I got a TicWatch Pro 4G (catshark) and I live in the US. Brand new, but I can not tell you what firmware it came with. I flashed the U.S.A rom the moment the battery got to 50%, lol. I had nothing but issues. I flashed everything over and over. I think I could win a TickWatch setup Speedrun by now, I should summit my time. I made a bash script to automate the whole flashing process because I was tired of it.
I was out of ideas. I said "F it" nothing left to flash but the EU version. To my surprise it works perfectly, even data with Verizon, text, everything works for me, even Majisk. Flash Magisk 20.4 and you can install some modules. It's all kinda pointless on a watch though
I know the question is old by now but maybe it will help someone out just getting a TicWatch.
Click to expand...
Click to collapse
Can you post screenshots of such a setup please? I have posted several screenshots of my setup in other post and I can tell you that I believe there is no way that the EU rom will work on US Verizon. So please, post screenshots of rom build version and working Verizon signal, if you don't mind! I'm sure I'm not the only one that doubts such a working setup! Thank you!

JedidroidX said:
Can you post screenshots of such a setup please? I have posted several screenshots of my setup in other post and I can tell you that I believe there is no way that the EU rom will work on US Verizon. So please, post screenshots of rom build version and working Verizon signal, if you don't mind! I'm sure I'm not the only one that doubts such a working setup! Thank you!
Click to expand...
Click to collapse
Network State says "Disconnected" not sure what that's about but Verizon works as it should. Phone number is there, I purposely didn't show the whole number. I couldn't tell the EU version from the US by looking at firmware version but It's the Rom labeled "EU" is all I know.
I flash it manually with a rooted Note 10 if that makes any difference. Never connected the watch to a pc. I

Why is everyone so quiet now? You were not expecting screenshots?......I'm joking. Is that even the EU Rom? I honestly can't tell. It's from the EU Mega Folder posted here.