Hi, i need help on ADB on win xp. i have imac and i have adb on my mac but when i try to open adb on my xp it says: adb is not a valid win32 program... i used this program --> http://androidsamurai.com/forum/viewtopic.php?f=12&t=4 its an automatic program that sets everything up plz help me cuz i cannot do anythig with my mac... and i have to get adb on xp... plz help me ASAP!!!!!
thank you
EDIT: i have win xp sp3 home edition
manually setup everything up,i just did it today
watch this you might get some help:
http://www.youtube.com/watch?v=uVU8vQVKo6I
[email protected] said:
manually setup everything up,i just did it today
watch this you might get some help:
http://www.youtube.com/watch?v=uVU8vQVKo6I
Click to expand...
Click to collapse
ok ill try that...
ok got it working... back to ROM making
glad i helped
Hello, I am trying to repartition with HD2 NAND toolkit, and I keep getting this error.
USB init failed
Info: .\RSPL\RSPL.cpp (736).
I already tried searching but I did not find anything that can fix it.
My current computer is 64 bit Windows 7, and it gives me that error.
I just also tried it on a 32 bit Windows XP computer, it won't get past "Waiting for USB connection"
Can someone please help? I can't proceed.
Can someone help
try to update your drivers, they might be corrupted, try some of the links below it might help.
i know there is a thread here all bout the drivers needed for the HD2
Guys, How could we detect yureka as MASS Storage device on winXP?
any pc suite/driver we require. I tried after installing ADB drivers but still no luck.
any response would be much appreciated.
http://www.softpedia.com/get/Programming/Other-Programming-Files/Media-Transfer-Protocol-Porting-Kit.shtml
Go to this link & install this into ur XP... Don't knw it works, but it's worth a try...
Respond whether it works or not (maybe others can benefit from this info)
What is the starting situation?
You bricked your phone. It can't be started anymore. No charging, no recovery, no fastboot. Your phone is not recognized by your computer.
What to do now?
1. Drain the battery!
Therefore you just have to be patient. Press the power button every now and then. It takes approximately 2 days until the battery is drained.
How do you know if your battery is drained?
When connecting to a charging station or a computer the led-light will pop up red and turn off after a few seconds again.
2. Download the rom for your device!
HTML:
http://androidmtk.com/download-gionee-stock-rom-models
HTML:
http://www.android.gs/download-gionee-stock-rom/
The drivers and the flash tool you will need are also contained in the download.
3. Install the driver.
Your phone should be disconnected while you are installing them. When you connect your phone now it should be recognized under COM port as 'Qualcomm HS-USB QDLoader'.
4. Start the tool and set the settings like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
On almost every website it is stated that you should set "Platform" to "8x26". Do not do it! ( This was the cause my phone bricked)
"Platform" hast to be set to "8974" for our phone.
5. Click on download and wait until it is finished.
Enjoy your unbricked Gionee!
FAQ:
Q) GNQC download doesn't work. It gives the error "application failed to start".
A) Install VC++ 2005 redistributeble SP1 ATL security upgrade.
Q) I receive an "incorrect parameter error".
A) You are using a Chinese flash tool so make sure your copy of windows supports Chinese. Change local settings in the control panel.
Q) I receive an "in gnqc bp_image file doesnt exist" error.
A) Remove Chinese characters from the name of the image folder.
Q) My phone is not detected.
A) Let it sit and drain the battery in 1-2 days. Now plug it in via usb cable.
The biggest problem:
Q) My phone is detected as usb hid device instead of com port.
A) There are problems with different versions of Windows.
For me, this problem occured with Windows 8 64-bit.
It is recommended to follow the procedure on a computer with Windows XP 32-bit. Windows 7 32-bit might work also.
Alternatively:
Use a virtual machine. (I used Virtual Box by Oracle.)
1. Create a virtual image of windows xp 32bit in the virtual machine.
2. Install windows xp 32bit on it. (You need a windows xp installation ISO or CD)
3. Put the downloaded rom, flash tool and drivers into the virtual machine. (e.g. with an usb flash drive)
4. Install the drivers while your phone is disconnected. Now connect your phone to the virtual machine.
Now your phone should be recognized. Follow the rest of the procedure.
There are some threads on xda which try to help with bricked E7 devices. I just wanted to put all together and add some information. So make sure you check the credits!
Credits:
dhirajranger
HTML:
http://forum.xda-developers.com/showthread.php?t=2735079
StarLord21
HTML:
http://forum.xda-developers.com/elife-e7/general/unbricking-gionee-elife-e7-total-hard-t3186697
psghari
HTML:
http://forum.xda-developers.com/elife-e7/help/hardbricked-e7-fix-t3136602
[/QUOTE]The biggest problem:
Q) My phone is detected as usb hid device instead of com port.[/QUOTE]
My phone after drain the battery don't detected de device and don't light any red led. Nothing. Please can you help me? I am very disgust.
Thanks for your attention and hope your answer ASAP.
thesmartphonero said:
My phone after drain the battery don't detected de device and don't light any red led. Nothing. Please can you help me? I am very disgust.
Thanks for your attention and hope your answer ASAP.
Click to expand...
Click to collapse
First of all open your device manager. Then connect your phone. Check if any device was added (like unknown USB-device or something). That is the case if battery is not drained.
USB Input Device IN HID Menu
My phone is detected as USB Input Device in the HID Section
whats next?
Always shows this error..
Please help me out..
shivam2702 said:
My phone is detected as USB Input Device in the HID Section
whats next?
Click to expand...
Click to collapse
The biggest problem:
Q) My phone is detected as usb hid device instead of com port.
A) There are problems with different versions of Windows.
For me, this problem occured with Windows 8 64-bit.
It is recommended to follow the procedure on a computer with Windows XP 32-bit. Windows 7 32-bit might work also.
Alternatively:
Use a virtual machine. (I used Virtual Box by Oracle.)
1. Create a virtual image of windows xp 32bit in the virtual machine.
2. Install windows xp 32bit on it. (You need a windows xp installation ISO or CD)
3. Put the downloaded rom, flash tool and drivers into the virtual machine. (e.g. with an usb flash drive)
4. Install the drivers while your phone is disconnected. Now connect your phone to the virtual machine.
Now your phone should be recognized. Follow the rest of the procedure.
shivam2702 said:
Always shows this error..
Please help me out..
Click to expand...
Click to collapse
Make sure you have the right firmware.
4ndaKava said:
The biggest problem:
Q) My phone is detected as usb hid device instead of com port.
A) There are problems with different versions of Windows.
For me, this problem occured with Windows 8 64-bit.
It is recommended to follow the procedure on a computer with Windows XP 32-bit. Windows 7 32-bit might work also.
Alternatively:
Use a virtual machine. (I used Virtual Box by Oracle.)
1. Create a virtual image of windows xp 32bit in the virtual machine.
2. Install windows xp 32bit on it. (You need a windows xp installation ISO or CD)
3. Put the downloaded rom, flash tool and drivers into the virtual machine. (e.g. with an usb flash drive)
4. Install the drivers while your phone is disconnected. Now connect your phone to the virtual machine.
Now your phone should be recognized. Follow the rest of the procedure.
Make sure you have the right firmware.
Click to expand...
Click to collapse
Yes i'm having the correct firmware.... Please help
shivam2702 said:
Yes i'm having the correct firmware.... Please help
Click to expand...
Click to collapse
I think I have found your problem. Uncheck "Chenck Phone" and try again.
Otherwise just try to download the correct firmware again and try again.
Now Its showing a different Error....
It Shows this error after 1% in the Checking of GNQC files..
Can you please zip you GNQC folder and mail to me please.
I have also checked after unchecking the chunk phone but the result is same ...
1652.48 MB is shown at my section and your's showing 1652.50 MB...
Is it the issue?
Firmware Check
4ndaKava said:
I think I have found your problem. Uncheck "Chenck Phone" and try again.
Otherwise just try to download the correct firmware again and try again.
Click to expand...
Click to collapse
Are are using the "Gionee_E7_32G_0301_T8143.ZIP" ?
2,630,999 KB or 2,694,142,825 bytes or 2.50 GB....
is it the same?
And the link that you provided is having the V 4.2.2...
shivam2702 said:
Are are using the "Gionee_E7_32G_0301_T8143.ZIP" ?
2,630,999 KB or 2,694,142,825 bytes or 2.50 GB....
is it the same?
And the link that you provided is having the V 4.2.2...
Click to expand...
Click to collapse
http://www.android.gs/download-gionee-stock-rom/
You might also try this page for a rom.
Is it still recognized as hid?
If so, you should make it recognize as qualcomm 9008 or 9006 before trying..
shivam2702 said:
It Shows this error after 1% in the Checking of GNQC files..
Click to expand...
Click to collapse
I had the same problem, I solved in this way:
Open the downloader
Connect the phone
Wait until it's recognised
Try to flash
If it stops, unplug and then plug the phone again keeping the downloader opened.
I know it could seem stupid but in windows the most of the things works in this way...
:crying: Not Working for me
:crying:
Not Working for me
I restored but now no network please help
shivam2702 said:
It Shows this error after 1% in the Checking of GNQC files..
Can you please zip you GNQC folder and mail to me please.
I have also checked after unchecking the chunk phone but the result is same ...
1652.48 MB is shown at my section and your's showing 1652.50 MB...
Is it the issue?
Click to expand...
Click to collapse
I am also getting same error...
any solution...?
Awesome it made my Gionee unbricked
My device is soft bricked but the volume up key is broken so will this method work ?
and also that my device is not recognised
vedant.sharma68 said:
My device is soft bricked but the volume up key is broken so will this method work ?
and also that my device is not recognised
Click to expand...
Click to collapse
My xp 32 bits doesn't recognize the phone, it apperars like USB not Qualcomm... any idea?
ALCTEL HS Usb QDloder 9008 Driver Needed
All time i connect device to pc my pc detect hid/usb divice ...than 21/1/2016 my device connected pc and restart my pc. After restart i saw one iobit driver booster app wich notify me i have 3 new drive update one is my nvdia display one is my internet adapter ..but last one is unknown device detected ...than i click update now phone atomatic connect port ALCATEL HS Usb QDloder 9008 (port20)..now i open flash tool select firmware and select 8974 instead of 8x26 ..start download withing 5 minutes my phone downloaded 100% successfull now after 2 minutes i remove phone to pc connect charger red light start continue and 10 minutes later i pressed power button 15 second and my phone start like new unroot ..i al to happy that night ..thanks to all who give me right direction..thanks all ..sorry for bad English..
my phone dead
Hi friend,
My phone dead while updating on (GN_Qcom_Download_Tools_V2.1.0.1). Now cant connect Phone with PC even i installed all drivers for gionee elife e7 32GB. now in DEVICE MANAGER showing UNKNOWN DEVICE. kindly brothers someone guide me how to install again firmware.
---------- Post added at 08:18 AM ---------- Previous post was at 08:00 AM ----------
brother i have same problem with my gionee elife e7 32gb and i try same firmware Gionee_E7_32G_0301_T8180_(by_xdafirmware.com). ON GN_Qcom_Download_Tools_V2.1.0.1.
Kindly help me bro, my whatsapp 00971503294484.
shivam2702 said:
It Shows this error after 1% in the Checking of GNQC files..
Can you please zip you GNQC folder and mail to me please.
I have also checked after unchecking the chunk phone but the result is same ...
1652.48 MB is shown at my section and your's showing 1652.50 MB...
Is it the issue?
Click to expand...
Click to collapse
Hey guys,
On jan 2021 I've installed windows 10 cracked version in my hp laptop. Later than i got issue during use of dev apps. Now I want to switch back to official version of windows 10.
I've created windows 10 bootable usb from media creation tool. But I'm not able to boot it. I pressed F9 key and select usb on boot option than my pc stuck on hp logo in boot loop.
I also tried to reset but got an error (no recovery environment) also tried to advance startup got no reset option there. Please find the bios setting and error images as attachment.
Thanks for help in advance.
Nikhilll_mishra said:
Hey guys,
On jan 2021 I've installed windows 10 cracked version in my hp laptop. Later than i got issue during use of dev apps. Now I want to switch back to official version of windows 10.
I've created windows 10 bootable usb from media creation tool. But I'm not able to boot it. I pressed F9 key and select usb on boot option than my pc stuck on hp logo in boot loop.
I also tried to reset but got an error (no recovery environment) also tried to advance startup got no reset option there. Please find the bios setting and error images as attachment.
Thanks for help in advance.
Click to expand...
Click to collapse
i think you are using a bad program for making a bootable iso.the best program i think its rufus-1.3.4 for making a bootable iso win10 or win7 i will attached it here for you.i hope it will help.
just unzip the file and run the program after you insert your usb drive or sdcard
If the BIOS is well set and the flashable USB is ok (Rufus or Media Creation Tool -> follow online guides) turn poweron the notebook and by pressing F9 with the pendrive inserted select the last option "USB Hard Drive - SanDisk Cruzer Blade" than the Windows 10 logo should appear immediatly, and than the Win 10 installation menu.
Download the latest version of the BIOS and UEFI firmware on your PC, and unplug all the other USB drives connected to the device.
Will on windows, open pendrive and execute setup.exe. Check if start.