O.k. for everyone who's traying to Flash in Vista
Donwload the files from this link: http://rapidshare.com/files/38401715/Manual_and_files.rar.html
and extract them in a new created folder like for example your desktop. Extract the USB Modem Vista in a different folder on your desktop (easy to find)
- put your device in bootloader mode (press and hold power, light and softreset button)
- connect the MDA to your computer.
- open computer management (devicemanager) in vista, rightclick computer in startmenu and select manage (see step 1)
- in computermanager open devicemanager (step 2)
- follow step 3 and 4.
After step 4 browse to the folder where you extracted the USB Modem Vista and choose next.
It will install the active sync drivers to vista and you will be able to flash.
I attached a exit bootloader file to exit bootloader mode (you can also install drivers without flashing the device)
YOU ALWAYS HAVE TO EXIT BOOTLOADER MODE!!!! EVEN BEVORE FLASHING!!!!
If you do it properly it will be done in less than 4 minutes.
Good luck.
Duanes
excuse my poor english
hey, the rapidshare link does not work
any alternate location that i can get the file from?
thanks!
San
thanks for your help! i can finally flash through Vista!
dreamtheater39 said:
hey, the rapidshare link does not work
any alternate location that i can get the file from?
thanks!
San
Click to expand...
Click to collapse
you can send me your email trough pm and then I can send the files to you!
sstrunks84 said:
thanks for your help! i can finally flash through Vista!
Click to expand...
Click to collapse
I know what you mean, I could finally use only vista as o.s.
hey duanes!
I finally got the link to work and downloaded the file!
I could update the drivers and everything worked just fine!
Thanks a million for this, i've been looking around for this for a loooong time!
cheers m8!
San
No thanx, good luck flashing!
nonsense
duanes said:
O.k. for everyone who's traying to Flash in Vista
- put your device in bootloader mode
...
It will install the active sync drivers to vista and you will be able to flash.
Click to expand...
Click to collapse
Nope. In Vista with current drivers and updates the driver cannot be updated to an older one; neither in bootloader mode (uknown USB device) nor in standard mode (PocketPC).
vjj
Don't hate if you're a noob With Vista
Download my package and see for yourself mate!
I run Vista Business for almost 6 months and I'm flashing trough Vista for quite a long time now. Even now after upgrading the Windows Mobile Device Center.
So as far as I know your post is based on nonsence!!!
As I've said many many times, you have to do it exacly the way I wrote it.
Pro to noob
for your info, I've been using Vista for about two years.
building and flashing ROMs for 3 years now.
I do not argue with possibility to flash ROM in Vista.
I do argue with possibility to use your instruction universaly in all standard Vista installations.
I've seen and tried both possibilities myself.
Universal in boot mode:
"The best driver software for your device is already installed.
Windows has determined the driver software for your device is up to date.
Uknown Device."
Have you ever seen this message? I doubt.
I've seen that message when you don't do it correctly.
I'm not going to discuss with you if it works or not. And as far as being a pro... been working at microsoft for 6 years. Cheers mate! and good luck flashing building or whatever it is that you do.
Nonesence Again.
vjj said:
for your info, I've been using Vista for about two years.
building and flashing ROMs for 3 years now.
I do not argue with possibility to flash ROM in Vista.
I do argue with possibility to use your instruction universaly in all standard Vista installations.
I've seen and tried both possibilities myself.
Universal in boot mode:
"The best driver software for your device is already installed.
Windows has determined the driver software for your device is up to date.
Uknown Device."
Have you ever seen this message? I doubt.
Click to expand...
Click to collapse
I was using vista since beta1, and i have been using WMDC since its beta stages. And i do have to confirm the method with updating your drivers with AS ones works Perfectly. Try again, but dont search for drivers, update it manualy, AND, dont forget to untick ALLOW USB CONNECTION in WMDC before pluging in a bootloaded device. That really does work a charm.
But what about Vista 64 version? This driver don't want to install on Vista 64...
Mr Groch said:
But what about Vista 64 version? This driver don't want to install on Vista 64...
Click to expand...
Click to collapse
use the ones from activesync for XP x64
This isn't working for me? I tried it numerous of times... I'm using Vista Home Premium and it goes through everything- but when I started to install my ROM- the program shuts down at the part where it begins to load
thetruestar said:
This isn't working for me? I tried it numerous of times... I'm using Vista Home Premium and it goes through everything- but when I started to install my ROM- the program shuts down at the part where it begins to load
Click to expand...
Click to collapse
Can you please tell me more like, wich Rom and wich MDA or PDA you are using?
Did you trie to rightclick te ROM update and run it as administrator?
I had the Wizard and I was trying to update the Wizard with the Touchflo ROM
thetruestar said:
I had the Wizard and I was trying to update the Wizard with the Touchflo ROM
Click to expand...
Click to collapse
Uhh.. is that the right ROM for that device??
duanes said:
Uhh.. is that the right ROM for that device??
Click to expand...
Click to collapse
Yes... I uploaded it from my XP computer which I rarely use- but I wanna start uploading with my VISTA...
This is how it looks...
This is the message that pops up
thetruestar said:
Yes... I uploaded it from my XP computer which I rarely use- but I wanna start uploading with my VISTA...
This is how it looks...
This is the message that pops up
Click to expand...
Click to collapse
I'll try to find a solotion for this!
I tried installing the latest builds of Haykuro into my G1, they install fine however I lose adb I keep getting "error: device not found" when I revert to the latest JesusFreak build it starts working again just fine, any ideas why? Thank you in advance.
Sometimes adb.exe stay open in windows process close it reboot your phone and plug it again all is good.
did this fix it?
If not i updated to the new spl and got the new drivers and now adb works fine.
I am using Windows 7 64bit... I could get ADB working one time, and two mins later not at all.
I found this "tip" in a prior thread and I cannot remember who to credit (sorry).... but this worked for me last night without a problem....
When you reboot... hit F8, and scroll all the way down and disable Digital Driver Signing.
After I booted ADB was working great.
Thank you all
Thank you for all your responses I will try them tonight =]
Do0zman said:
did this fix it?
If not i updated to the new spl and got the new drivers and now adb works fine.
Click to expand...
Click to collapse
quick question can u point me in da right direction for the new adb driver....ive searched cant find it
im still getting the problem ive tryed disable driver signing uninstalling reinstall drivers reboot after reboot process kills. And stil cant mount adb. Vista Ultamite 32 bit with update drivers from haykuro
jmotyka said:
im still getting the problem ive tryed disable driver signing uninstalling reinstall drivers reboot after reboot process kills. And stil cant mount adb. Vista Ultamite 32 bit with update drivers from haykuro
Click to expand...
Click to collapse
I'm trying to get this to work also. I have Vista Ultimate 32 bit, where is this new driver that i've read about?
I7oobie said:
I'm trying to get this to work also. I have Vista Ultimate 32 bit, where is this new driver that i've read about?
Click to expand...
Click to collapse
Its in the driver package, just unzip it to C:\ then plug in your phone, go to device manager and look for Android Device, then install the driver from that folder on C:\
works for me and im on XP Laptop and an Vista Ultimate X64 Machine
Dantehman said:
Its in the driver package, just unzip it to C:\ then plug in your phone, go to device manager and look for Android Device, then install the driver from that folder on C:\
works for me and im on XP Laptop and an Vista Ultimate X64 Machine
Click to expand...
Click to collapse
Thanks for the response. I could've swore I've done that, but maybe I'll try it again.
GUYZ help.. i cant root due to this..
adb driver in not installing on my win xp sp3 laptop.. all other drivers are working fine.
i tried re installing drivers and kies..
nothing worked..
SOMEONE please help me !
adb drivers?? you mean the single click root is not working?? do you get this message ? the application failed to initialize properly.... ? then you need a new .NET microsoft framework google. it
Hi, I can't install zune on my win 7 64bit, anyone know why?
it says: setup must stop cuz require package"windows 7 portable device update" didn't install
error code: 0x80240017
(had tried change compatability to vista/ sp1/ sp2/ xp sp2...
run as admin... install as many thing I can find online ...still doesn't work )dying- -
Maybe this will help you.
http://www.tech-recipes.com/rx/4678...ws-updates-or-without-an-internet-connection/
thx, but still not work, alr changed back to android miui. lol
What Antivirus are you using? Disable it! Then make sure Windows Mobile device Center (http://www.microsoft.com/downloads/en/details.aspx?FamilyID=4F68EB56-7825-43B2-AC89-2030ED98ED95) is installed on your computer and try again.
Okay I want to ask how I could get my HTC HD2 synchronized 10.10 linuxi ubuntu that I could get a new ROM. before you start throwing that hey why do not try wine, I have tried to install it but activesync works but the usb do not work. I also tried the Sync icon and multisync, but none of them work. also tried virtual box using xp ISO img and installing activesync but COM ports, did not work. So, if there is some Linux guru and boss please help me.???