Enjoying my new Nook Glowlight Plus after much angst of thinking it was time to jump ship. Glad I didn't, though I am shocked at the lack of decent covers for it (none I can find with a rear stand like the awesome one I have for my Simple Touch.
Anyway, the one annoying thing about the new unit is the darned phyical Nook button on the bottom front of the unit. I'll be reading away and my finger slips and, presto, I'm out of the book and back to the home screen. There has to be a way to beat this little button into reacting usefully.
Has anyone found a solution for this issue?
Agrajag27 said:
Enjoying my new Nook Glowlight Plus after much angst of thinking it was time to jump ship. Glad I didn't, though I am shocked at the lack of decent covers for it (none I can find with a rear stand like the awesome one I have for my Simple Touch.
Anyway, the one annoying thing about the new unit is the darned phyical Nook button on the bottom front of the unit. I'll be reading away and my finger slips and, presto, I'm out of the book and back to the home screen. There has to be a way to beat this little button into reacting usefully.
Has anyone found a solution for this issue?
Click to expand...
Click to collapse
Install Xposed Additions, and remap the HOME button as "Click" disabled, "Long Press" as home.
Related
The part where the display is becomes shaky a bit when you slide open the keyboard
Is that something that I should be concerned about or is it normal?
I think it's normal. I've examined four X1a's and they all had a small amount of play in the top part of the slider when open.
Mine has also a slight play to it (back and forth). Noticed this on the Raphael as well.
Keep in mind though, that the slider is only supported by two metal hooks situated (when keyboard out) at one end of the screen. So guess it's normal.
The play will also increase as the phone gets older (wear and tear). As long as the screen doesn't fall off I guess it's ok.
To prolong the life though, I try to be gentle when opening and support the screen when it's open (to reduce the wear and tear).
Mine's shaky when closed. Went to the service centre thrice and everytime they said it was normal.
Mine is a bit shaky as well. even when closed, but afer giving it some thought, i guess it impossible to make it totaly solid, at least with this form. i annoyes me, though. pressing the keys and you feel how it bends a little. when opened, I am afraid to press the little x or soething else on top of the screen, at least without supporting the lower side with my other hand.
Jabe said:
Mine is a bit shaky as well. even when closed, but afer giving it some thought, i guess it impossible to make it totaly solid, at least with this form. i annoyes me, though. pressing the keys and you feel how it bends a little. when opened, I am afraid to press the little x or soething else on top of the screen, at least without supporting the lower side with my other hand.
Click to expand...
Click to collapse
I support it when open, cause it's impossible to make it solid (@least not in this form factor). It's easy enough for me though.. cause the phone fits in my palm so easy (and way easier than other phones I've had - But I do miss the tilting screen from Kaiser though..then again, that needed major support when tilted)
I am new to this board, hello everybody!
I have my X1 for a week now. On mine the top part is shaky when closed, it moves ~1mm up/down opposite of the slider hinges. Anyone else?
It annoys me, but I hope it is okay and won't get worse.
Greets and have Fun with Your X1s!
i think it's normal. I noticed that as soon as I took it out of the box and was very worried. it's my first slider phone and i didn't know what was normal and what was not. reading threads like this was very reassuring for me. I just hope it won't get loose, if it stays like that, then i'm happy.
It seems really solid to me. No movement at all unless I push on it. I’m guessing it will loosen up over time.
same here, closed and opened. When I press gently in opposite corners when closed, it waggles slightly. I got annoyed/worried about this after purchasing the phone few months ago and went to the store to ask about it. I got to test three different X1s and they were all similar, so it's not a problem (or at least it's by the design
A bit annoying still though, especially when using touchscreen with your fingers. Mostly when pressing on the right side of the screen (down-right being the worst), it waggles slightly under your fingers.
Same here too. About 1mm up and down when closed, and when open, same.
And yes Jent, it does waggle a bit. Try using the phone when you're lying in bed, and hold the phone upside down... every press will move the screen about 1mm and it gets annoying very quickly.
i also have the problem with the upper corner^^
I probably have one from the earlier batches, and the buttons I find a bit too stiff. Would love it if they were much softer. I recently made a trip to Costco, which had a dummy phone whose buttons were much easier to press. Now, I'm wondering if later batches have softer buttons. It could be the way the dummy phone was made though...
Anyone who's ordered more than 1 phone notice any difference in the action of the buttons?
I actually exchanged my phone for a new one last week because the back button started creaking after awhile. (That was just one of several problems I had with that phone...) I think the buttons were really stiff and because of that I felt I had to press harder on the button and I think wearing down the button way too much to the point it started to creak.
The new phone I got has a much better tactile feel on the buttons now. It's a bit softer to touch and quieter.
I have my second MT4G. The first one made sometimes creaky noise on the home button but that was not the reason why I returned it. My second one doesn't have the creaky noise but the buttons are still hard to press. I come from the N1 that had soft buttons so everything with hardware buttons is a big change. I think that the buttons are more protruding on my second one; feels a bit odd but no reason to exchange this phone again.
I was curious whether the buttons are easy to trigger by accident.
On my Nexus S and the Focus, there is a subtle upward curve at the bottom of the phone. This small lip seems to prevent a lot of accidental presses of the capacitive buttons.
In my experiences with a completely flat face phone (the HD7), accidentally pressing the capqcitive buttons was extremely common and annoying. I like the looks of the Omnia 7 more than the Focus, but if it leads to similar problems as the HD7 (always pressing the buttons by accident) then I'd rather go with the focus.
For me that's one of the most annoying things about the phone. I hit the search button all the time.. But some say there will be a firmware update to fix that.
singularity0821 said:
For me that's one of the most annoying things about the phone. I hit the search button all the time.. But some say there will be a firmware update to fix that.
Click to expand...
Click to collapse
That's exactly what used to happen to me with my HD7. When I held the phone part of my thumb would be on the bezel and it would hit the search button. Also, when I held the phone in landscape my finger would also hit it.
With the Nexus S I don't run into this problem because the bottom is curved a bit. I've also played with the Focus a bit and it seems to have this slight curve at the bottom as well.
yup same thing here, this is when I spend time try to browse through apps and use my phone when it was still new. now i got the hang of it, and i dont really fiddle it as much as before now, just a basic need. and i got what a really wanted, fast and responsive phone.
Hey Everyone,
I do this every now and then, wondering if everyone else does.
Let's say I'm using the phone one handed, web browsing or something and I need to reach a button on the opposite bottom corner.
Rather than stretch across the screen, I just rotate the phone 90 degrees for a second. The screen rotates, and the button is now directly under my thumb. I click it, rotate back and move on.
Yes, the Note still sucks sometimes as a one handed phone, but this does help out every now and then.
- Frank
oh thanks nice idea
another way is to curl your finger around the back of the phone...I did try this, and looks really funny if you're watching from afar
I guess I just have big hands. The way I hold the phone, I can touch everything to the right of the blue line.
Ha.. same here. I've got big hands too. One overseas colleague once asked me if that is a S2 I'm holding.
If I'm holding the phone, you can only see 1/4 of it from the back. And only 1 cm separates my thumb to the closest finger when I hold it.
This is particularly useful if you're reading in landscape.
Sent from my GT-N7000 using XDA Premium HD app
another trick for zooming during browsing with the stock samsung browser is to simulate 2 fingers. usually you can zoom in and out by putting them on the screen and overturn the phone.
so instead of using to fingers, just put your thumb on the left side of the screen, so that a small part of your palm touches the screen on the right, which simulates an input^^
i hope u understood what i mean
I never hold my phone 1 handed. I'm too afraid of dropping it. But I'll try your advice if I ever need to
First off I want to start by saying that this is potentially the best piece of technology I have ever bought. I am in LOVE with the flexibility of Android (brand new iOS switch over) and the raw power and hardware of the N3.
I bought this beast a couple of days ago and I instantly noticed that the home button was a bit wiggly if I tried hard to make it wiggle. Needless to say I ran to the web and found that may others have been having the same issue but its not a deal breaker in any way. I have come to terms with it and it no longer bothers me.
What I also noticed was that the volume buttons are quite loose and shake quite a bit if I move them around with my finger. I can also hear them rattling a little bit if I shake the phone and if it vibrates there is a slight sound. Is this also standard with all N3's or are my volume rockers a one off case?
I am under a replacement warranty and getting a new piece should be no issue, but if this volume issue is a common one then I wont bother as everything else is working perfectly and I don't want to risk running into different problems with another N3.
floko127 said:
First off I want to start by saying that this is potentially the best piece of technology I have ever bought. I am in LOVE with the flexibility of Android (brand new iOS switch over) and the raw power and hardware of the N3.
I bought this beast a couple of days ago and I instantly noticed that the home button was a bit wiggly if I tried hard to make it wiggle. Needless to say I ran to the web and found that may others have been having the same issue but its not a deal breaker in any way. I have come to terms with it and it no longer bothers me.
What I also noticed was that the volume buttons are quite loose and shake quite a bit if I move them around with my finger. I can also hear them rattling a little bit if I shake the phone and if it vibrates there is a slight sound. Is this also standard with all N3's or are my volume rockers a one off case?
I am under a replacement warranty and getting a new piece should be no issue, but if this volume issue is a common one then I wont bother as everything else is working perfectly and I don't want to risk running into different problems with another N3.
Click to expand...
Click to collapse
Not seen any issues regarding Volume buttons being dodgy, only the home button. (only a small percentage tho) - Guess you just got a lemon unit, it does happen from time to time with any hardware.
I've got no problems on the home button or the volume buttons or the power button. Once you put a case on it you won't notice if it's just minor. But if it's bad, is get it changed. ..?
Sent from my SM-N9005 using Tapatalk