After screen replacment (screen+digitizer) in unauthorized service when I touch screen with a small pressing force on screen I can se little discoloration (like this when You touch monitor screen). It is normal in replaced screen?
That should never happen unless the glass is actually touching the screen or it is software-related, although I have never seen a ROM do that.
that's completely normal imo.. I had 2 G2s all of them had that issue. and my friend's g3 also has that.. in my instance it's not discoloring the screen.. it's like a small transparent ripple effect.. may be you have a different issue ?
My g2 with the original screen has a slight ripple when you press on it firmly. Probably all of them do... including your old one, but you didn't notice it. Now you're being hyper critical because you got it replaced at a 2nd rate place. If the color and touch accuracy/sensitivity is good then don't worry about it.
I'm not pro, but this never happend with screens that I replaced.
Related
Hi,
Recently ive repaired a HTC Universal, put it back together as best as i could.
Now when i do touch the screen with a stylus, the screen has funny colours behind it. It kind of like when you touch/ prod your Computer LCD. It only happens when theres pressure on the screen so its not really a huge problem. The touch screen is definately there cause when i tap the screen it responds (e.g i tap start and the menu pops down).
If its normal then i can take it, but if its not im complaining to the ebay seller.
This doesent happen when i put any form of pressure on my HTC magician LCD, so im curious.
Let me know what happens with your universal
Cheers,
Whitemoo.
This is not normal behaviour of any touchscreen device!!
hmmm... well i just looked at the broken lcd screen, and even though the LCD itself is shattered, the touch screen is in perfect nick.
I put pressure on the touch screen and couldnt see any of the symptoms i saw on my current LCD
You guys recon i should swap the touch screen over? either way im complaining to the sellers, DODGY.
whitemoo.
from my knowledge, im pretty sure its normal. it happens sometimes on my 9000 so yeahh....
So I removed the included screen protector since it had a deep scratch on it. I read on the forums that you don't need the protector and that it actually works better without it.
Well my experience has been the complete opposite. Ever since I removed the protector I'm ready to smash this bloody phone. It's next to impossible to use due to the humidity in my area or something. The SMALLEST amount of moisture on my finger tips or even in the air will cause the screen to go haywire and register touches all by itself. Apps will open by themselves...i can barely type anything as it keeps typing multiple characters on it's own or other silly stuff. If I wipe down the display it will work fine for the first little bit until it gets that tiny bit of moisture from my fingers on the screen again and it starts going haywire again. It's a hassle just to try and unlock the phone from the lock screen at times.
So is my phone defective or is just the suffering I must incur by living in a humid area. I can't use the phone like this so I guess I'll have to look at buying a new screen protector. But if this is not normal and is a fault in my hardware then i would like to return it and get a different phone. I didn't really have issues with the screen protector on.
Ive kept my screen protector on my phone, works fine until i have moisture or (rain drops) on the screen, then my phone doesnt respond and also misfunctions the position of where i touch on the screen not sure if this is normaly as its the rain drops on the screen..
Tested witht he iphone 4 in the rain and works brilliant, why doesnt the X10 do the same !! :/
duffy1807 said:
Ive kept my screen protector on my phone, works fine until i have moisture or (rain drops) on the screen, then my phone doesnt respond and also misfunctions the position of where i touch on the screen not sure if this is normaly as its the rain drops on the screen..
Tested witht he iphone 4 in the rain and works brilliant, why doesnt the X10 do the same !! :/
Click to expand...
Click to collapse
As you may know, those screens are capacitive displays, that means they're activated by sending (very) small amounts of electricity and are kinda "looking for a conductive material" in order to register an input.
The conductive material can be your finger, or something like... a raindrop or your screen, so that's why it thinks you're pressing that part of the screen...
Now it's even more obvious without the screen protector since it's directly on the screen.
As for why the iphone doesn't have issues with that, it does, but the screen being multitouch it's not as bad...
thanks for the info.good to know.
I didn't like the thick screen protector as my thumb/finger seemed to drag and not slide smoothly. I took it off and replaced it with a slightly thinner protector. I'm much happier with the feel now.
Angie
Sent from my X10i using XDA App
@smok3yjk - probably best if you do as Angelahp - get another screen protector on there.
Hello there,
I bought my Tattoo in January this year. It went to the service centre once already, because the touch screen did not work anymore. It came back with a new one.
Today it got broken again. The symptoms; it was getting more and more difficult to get a long press, for instance to move an icon or remove a widget from the desktop. After it stopped working, I could see a dot matrix on the screen, and when the screen is off, it looks like there is some oil, diffracting the light, a bit like a rainbow.
Am I the only unlucky Tattoo owner with this kind of recursive issue? Is the life span of a Tattoo digitizer only 4 months?
What about capacitive screens - are they less fragile?
Is there any particular Android phone with a good / strong build and quality reputation?
Cheers,
JPascal.
I have similar problems with the screen. It's hardly usable. I get those rainbow-like spots on the screen, there is a big white mark at the top of the screen that fortunately I can see through when screen is on. Also the screen sometimes thinks I've pressed in places where I haven't, so it's impossible to use until I reboot. There are many other problems, and the only reason why I don't send it back to get fixed is that they keep it for weeks, and I need it.
I live in Taiwan, Taipei, so HTC support / service is not bad here. They can come and pick my cellphone at my office, and I can hope to get it back 3 days after.
I'll ask them if it's a common problem, will update this thread later.
JPascal.
_david_94 said:
I have similar problems with the screen. It's hardly usable. I get those rainbow-like spots on the screen, there is a big white mark at the top of the screen that fortunately I can see through when screen is on. Also the screen sometimes thinks I've pressed in places where I haven't, so it's impossible to use until I reboot. There are many other problems, and the only reason why I don't send it back to get fixed is that they keep it for weeks, and I need it.
Click to expand...
Click to collapse
I had same problems with digitizer.. But I fixed it :] This can happen when the screen is pressed for a longtime in pocket or the phone is dropped. But I fixed it :]
I turned the phone off, removed mask and tried to lift up digitizer little bit on side where was rainbow-like spots. When they gone, I put digitizer down and press on the side that I lifted up. Now everithing works like a charm
Yeh I have one of the rainbow spots..too i wanna know how can it be removed....cause i cant get rid of it.
that oil spot or Newton ring can be easily fixed by removing top mask and inserting sharp object between LCD and digitizer couple millimeters and then pull the digitizer up so it detaches LCD and newton ring disapears, then while you removing sharp object, used to pull digitizer up, press with finger from center outwards to pump out air and place it back firmly .. I`ve successfully fixed two HTC tattoo`s and one HTC HD display with that technique ....
najzlijiji
Nisam najbolje razumeo sta je digitajzer i proces uklanjanja mrlje na ekranu, pa ako mozes odjesni mi na srpskom, poz!!!
http://forum.xda-developers.com/showpost.php?p=4894288&postcount=8
well my htc hd2 is using android and using it a year by now and notice that the upper left of the screen is not working?is it the lcd or digitizer or just need to align it?i dropped this many times(up to 5 times i think)but no damage on the housing and it looks new,and it is annoying in some games cause it wont work and i notice a very little red dot on that part.....pls help
If you lost sensitivity and the screen does not respond to touch, then it's a digitizer, if picture is distorted or, as you describe, a red dot appeared where it shouldn't be - LCD, sounds like both in your case. I am not quite sure how it doesn't work in games or whether the problem is present in normal screens. Alignment is a procedure to tune and correct mistakes in touch recognition or to make touch more precise on resistive screens.
I suggest replacement of your LCD + DIGITIZER. Dropping it many times may have caused it too, even if housing looks perfect.
so strangely for no reason at all i have these two strange marks on my screen, if i look closely i can see their not on the OLED panel but not on the surface of the outer glass either, its almost as if their between the both. its very odd as i have always looked after my screen. they are a strange silver color when screen is off and they look like dust when screen is on. although they are small i can notice them at all times and hence are very frustrating. does anyone have any ideas what they could be?
If your device still under warranty then just send it to service center to ask them replace a new screen panel.
well normally i would but i have voided the knox warranty so.. yeah