Database Users

Touch Screen Not working.. plz help.

Hi mates yesterday i bought a used herm...with excellent condition. but when i opened any dialog. the window closed automatically. and the screen light remains always on. and touch is creating problems.
and after some time the touch screen totally stop working. i dont know what happened. al the buttons are working fine. i upgraded my t-mobile herm to its original t-mobile wm6 rom. and again the touch screen is not working. and the screen light always stay on..
so is this hardware or software problem.?
guide me if you have any clue about this..
according to my thinking.. i think some button is pressed continuesly.. but everything is working fine.. only the touch is not working.

broken digitizer for the touch screen, buy a replacement lcd/digitizer together and replace yourself, about $100Aud. Use Mike Channons site to download the service manual. Use the search function and type in "htc service manual hermes".
As for the light, you will have to use your buttons to navigate to settings>system>backlight>battery power and external power. you can select how long the backlight remains on for.
Cheers...

Hi mate thanks for your reply.. Actually the situation is that. the screen is working perfectly. all buttons are also working perfectly. but suddenly the touch feature stopped working.
that time i was just opening some menus and they closed automatically. it looks like that there is some button pressed. and the screen light never stops. it continuously remains on. all buttons are working perfectly and everything. on the touch feature is not working.
i upgraded my device with genuine shipped t-mobile wm6 rom and again it stopped at the starting screen where i have to click the screen and the device brings the window for stylus adjustment.
so i wanna ask that is this also possible that some touch drivers are corrupted or something like this.? or is this a hardware failure.?
Kind Regards

I had same problem, it was hardware. Thats why I said to change the lcd. It is theoretically possible to replace JUST the digitizer, BUT, it is a MAJOR hassle.
As for getting past the alignment stage, look up Remote Screen Alignment. Its a cab file that stores the alignment settings on your pc. You WILL have to have a friend that has the same phone so you can get their settings as you need to copy them to your pc first. You can then copy the settings to your phone so you can use it until you replace that pesky lcd...
Cheers.....

I had a similar problem with my hermes. After a lot of investigating, I found out that this is a heat related issue with the hermes. The unit will heat up an some connection somwhere gets messed up and continually registers ghost taps on the upper right corner of the screen, which causes the continual opening and closing of programs/task manager. This overloads the phone which then causes the screen to eventually become unresponsive due to excessive computing.
With my phone, it must be heat related because it will only occur during or after heavy use or overcharging. Other people have had this exact problem with the conclusion being overheating. The worse part is, there is apparently no way to fix this, replacing the screen doesn't change anything. setting your screen alignment very far left will fix the problem but then everything you tap needs to be compensated for.
Good luck, hate to be the harbinger of bad news, but it's better to know whats wrong and that you can't fix it then not know whats wrong and keep trying to fix it.

same problem here... only my hermes is overheating already after 5 minutes use...
in the morning it works and when i put it in front of the airconditioning the touchscreen also works...
somebody who has an idea where to look for a solution??

kingsfan said:
same problem here... only my hermes is overheating already after 5 minutes use...
in the morning it works and when i put it in front of the airconditioning the touchscreen also works...
somebody who has an idea where to look for a solution??
Click to expand...
Click to collapse
Some of the suggestions in the white screen thread/s might help. The problem is that those who have the heat related problem will find it very difficult to trace the actual fault. The heat may be causing miniscule expansions on the boards / components and connectors. The tiniest of cracks or poor connections can therefore break with the expansion.
Another theory is that rather than heat it might be a capacitor that is breaking down either over time or again through heating. Unless you are a skilled electronic engineer that is virtually impossible to check, particularly since schematics are not available.
You might just be lucky if you dismantled and re-assembled - it might just re-set a connector or adjust a board so it does not get affected in future. That would be very much a matter of luck and of course potentially the situation might be made worse!
Mike

Hi mates. I am back with some issue.. i moved my device to a repair center and he said that its a software issue. and he fixed my device without changing any rom.. i dont know how..
but again when i open some window like programs. the right scrollbar make a problem... when i move scrollbar it automatically press the top close button..i aligned my screen 3 times but same problem with right side scroll bar.
and after playing with it. the touch totally stopped.
now the thing is.all the buttons are working fine and everything is working fine. even sms and calls. but when i check sms and press my scroller button. it displays the right click menu instead of opening the sms. and the screen light is continuesly on. as something is pressed. so. i think this thing wil help. i am now trying this method to check my pc.
http://inuchanbt.blog54.fc2.com/blog-entry-99.html
check this out as well.
i will send you details soon.

might just have something lodged between the case and screen.. also to get rid of the screen alignment, cable it up and delete welcome from the startup programs and then reset it.. should get you past it so at least you can use it until you repair your screen

dead front panel buttons + half working camera

ok im on a dopod 838 pro with no warranty left
all the buttons on the front panel are dead but everything else works
i can still do a hard reset by holding left and right soft key and reset
i took the phone apart...cleaned it reassembled but still no go
is this fixable by ordering parts online or smashing/smacking some part of the phone? if so then please leave a link as to where i can get the part or where i should smack it
also...the camera only works sometimes...other times i would just see a few vertical red lines on the screen when i try to start the camera app then the app would show up black...this usually happens when i keep my phone in my pocket for a period of time...any easy fix for this?
thx

I have exactly the same problem with my HTC TyTn.

Its Fixable
i had the same problem as u do now but i had some time left in the warranty so i send it back to be checked ..they fixed it saying that there were a short circuit in the keyboard ..i'm not sure if they are right about the shortage thing but i'm sure that its fixable
good luck

[Q] Incorrect Error Diagnosis at HTC Repair Centre

Hi,
I had the following problem with my HTC Diamond 2 (it might have got wet & it might possibly have had too much pressure on the screen)
Problem:
The mobile boots ok and the normal buttons at the bottom work fine, as do the volume up/down buttons. The display, however, has what looks like the newton rings and when I press the display it detects a 'press' about 1cm to the left of where i pressed. This means I can't use the right hand side of the display and also can't enter my pin.
Error Diagnosis: (from Arvato Services in Germany)
Mainboard is defect. Cost to repair = € 303.17
Is this possible ? If there was a problem with the mainboard then I would expect to see other problems - and at present, I can only see that the touchscreen has a problem.
Please let me know what you think, thanks in advance !
(ps there should be a question mark at the end of the 'title', don't seem to be able to edit though)

Based on your description and from what I've read, it's definitely the digitizer.
It is possible that you have a damaged board, but regardless, your digitizer is bad.
I would attempt to replace this yourrself then see if everything is fine before sending it to repair.

I had the same problem!
The screen was getting worse in alignment over a time frame of a couple of days. If replaced the digitizer and screen and all is back to normal ..... however it seems to work better then ever before.
The only problem left is dust between the digitizer and my screen, but this is my own fault since I didn't glued the screens. I'll re-open in the next few days and use some silicone to close the gaps. Mainly the volume key has an opening to the outside.
Good luck with the replacement!

[Q] Screen does not respond to touch after lockscreen

Recently my touch screen does not work once my lockscreen comes on. I can't figure out if it a hardware issue or software issue. If you had similar problem let me know if there a solution to fixing this.
I drop my phone a few months back and crack the bottom of the screen near the end button, so i can't send it in for warranty purpose.

I am having the same problem with one of my HD2's and T-Mobile never got back to me. I contacted HTC and they suggested sending it in for repair.

G4 Digitizer problem?

I have a Moto G4 that has had the touch screen become very erratic lately. This issue appeared shortly after a factory reset. The phone is stock, recently OTA updated to NPJ25.93-14.7. It frequently freezes and won't respond to touches of apps or the home/back/recent buttons, and won't side scroll to the next screens properly. Sometimes random apps launch on their own without any touch, and if you try to quit them with the back button they keep relaunching. The problem is intermittent.
I activated "Show Taps" in Developer Options and when the problem is happening there is a tap dot near the lower right side of the screen. It bounces up and down a little bit and vibrates sometimes. When this dot is visible tapping on anything else like app icons or buttons usually has no effect, however the taps are shown on the screen. If I hit the power button to make the screen go black it will sometimes recover when I reopen the display, other times it takes a reboot.
Wondering if it's a hardware issue, a guy at a Verizon store who seemed to know more than most said it was a faulty digitzer--it's seeing touches where there are none. I've replaced displays successfully before, would just like to have a confidence level that the digitzer is really bad before doing that, as opposed to a software or other hardware issue. Any ideas about problems that might cause this problem, like other hardware or a corrupted OTA? Seems very hardware-ish to me, but I'm no expert.
I have Drive links to a couple of short videos on the symptoms, can send links. Much appreciate any insights.

Mine has that issue as well. It will spam the 9 key on the unlock screen or anything in that spot if an app is open or what is on that spot at the home screen. I have to double unlock the phone to fix it. I guess turning the screen on and back off resets it for that session. But it's mostly every time the screen goes dark and comes back up I have to turn the screen off and back on to use the phone.

I had a similar problem and was able to send it in under warranty and get a replacement phone

G4 Digitizer or ghost touch
Apparently this is called Ghost Touch issue, and affects many phones. One solution tried is to disable Battery Optimization for System UI and Google Now Launcher in Settings>Battery>Battery Optimization. That seemed to cure it for a week or so, but the problem returned today. I can sometimes recover form it by hitting the power button to blank the screen and then reopen. Other times it requires a reboot. I see all kinds of alleged solutions out there from dimming the brightness to removing tempered glass protector to using a slow charger, but those don't seem like real fixes but workarounds (if they even work at all). Any other ideas?