I started out with USCC on this device. But last week I switched ourn lines over to big red. I noticed that big red forces you to use LTE, with no options under "cellular networks" to select CDMA. Here in Maine, LTE drains your battery 50% faster than CDMA, and data is wonky. It tends to be slower than CDMA, or at least feels slower because it is constantly switching between the 2 or hanging in limbo.
My phone was set to CDMA on USCC, and even after switching to Verizon, I'm still on CDMA. My question is, if I return to stock LP will it force me into LTE -with no choice of switching back to CDMA? So far, Marshmallow has been a huge disappointment on my phone.
HikingMoose said:
I started out with USCC on this device. But last week I switched ourn lines over to big red. I noticed that big red forces you to use LTE, with no options under "cellular networks" to select CDMA. Here in Maine, LTE drains your battery 50% faster than CDMA, and data is wonky. It tends to be slower than CDMA, or at least feels slower because it is constantly switching between the 2 or hanging in limbo.
My phone was set to CDMA on USCC, and even after switching to Verizon, I'm still on CDMA. My question is, if I return to stock LP will it force me into LTE -with no choice of switching back to CDMA? So far, Marshmallow has been a huge disappointment on my phone.
Click to expand...
Click to collapse
Just go into hidden menu via dialer and force your phone into CDMA or LTE or whatever you want. It's simple really and will give you what you want.
Well, is there a "new to Verizon" guide somewhere? Verizon didn't tell me about the secret codes. I don't even know how to do an advanced prl update.
I should have clarified that I've only ever been on USCC. I've never used Verizon. But I do vaguely remember reading about a hidden dialer code now that you mention it. I'll look into that.
HikingMoose said:
Well, is there a "new to Verizon" guide somewhere? Verizon didn't tell me about the secret codes. I don't even know how to do an advanced prl update.
Click to expand...
Click to collapse
This is android secret code not Verizon.
*#*#4636#*#*
Thanks. Never needed it because us cellular already offers that.
HikingMoose said:
Thanks. Never needed it because us cellular already offers that.
Click to expand...
Click to collapse
It's not a that they don't offer that 99% of the time you are better off on LTE so its good that phones prefer LTE. Most likely your other phone simply had that option not hidden unlike on Moto. So that wasn't a ussc feature
Sent from my XT1575 using Tapatalk
Agree to disagree. The data speeds are about the same here, but with the constant handoffs, LTE actually becomes slower and pages won't load because it's switching to 3G and back to LTE over, and over, and over. Plus the added battery drain off having 15-20dBm weaker signal, it's a no brainer. But maybe that's just in our less developed state.
The Samsung phone that I bought for my wife has no CDMA provisions, so it's not a Moto thing, it's a Verizon thing.
You can also download the thunder bolt lte on/off app and you have choices like CDMA auto prl. I use it to force CDMA only on my range extender at home.
Use shortcut creator to link to the hidden menu and your all set
HikingMoose said:
Agree to disagree. The data speeds are about the same here, but with the constant handoffs, LTE actually becomes slower and pages won't load because it's switching to 3G and back to LTE over, and over, and over. Plus the added battery drain off having 15-20dBm weaker signal, it's a no brainer. But maybe that's just in our less developed state.
The Samsung phone that I bought for my wife has no CDMA provisions, so it's not a Moto thing, it's a Verizon thing.
Click to expand...
Click to collapse
This device doesn't run Verizon branded firmware at all. It's how Motorola provisioned the device to work. Like patt2k said you can change that via the hidden menu and you should be good to go, it won't look for LTE after that.
Oaklands said:
You can also download the thunder bolt lte on/off app and you have choices like CDMA auto prl. I use it to force CDMA only on my range extender at home.
Click to expand...
Click to collapse
There seem to be many LTE on/off utilities in the App store. How did you pick this one?
I also have a Verizon Network Extender at home. I have trouble getting connected to it. I often have to reboot or turn the radio on/off to get my phone to connect to the Extender. I would appreciate any advice on how to get my phone to connect to the Extender more reliably.
It would also be nice if the phone would show via an Icon or screen that it is connected to the Extender. Right now the only way to know is to dial #48
EDIT: When I go into the Hidden Menu and select CDMA only, the phone temporary drops the LTE signal. However, LTE seems to quickly come back. Any suggestions on how to turn off LTE when I am home so that I force a connection to the Network Extender?
I can't get the hidden menu to switch from CDMA to LTE. It will switch temporarily, then drop the radio altogether forcing me to restart. Upon restart it's in CDMA only again. Personally, I'm fine without LTE. But I'm not sure why I can't get it enabled at all. I'd like to know I COULD have LTE if I wanted it. So I'm confused why it's stuck in CDMA
swieder711 said:
There seem to be many LTE on/off utilities in the App store. How did you pick this one?
I also have a Verizon Network Extender at home. I have trouble getting connected to it. I often have to reboot or turn the radio on/off to get my phone to connect to the Extender. I would appreciate any advice on how to get my phone to connect to the Extender more reliably.
It would also be nice if the phone would show via an Icon or screen that it is connected to the Extender. Right now the only way to know is to dial #48
EDIT: When I go into the Hidden Menu and select CDMA only, the phone temporary drops the LTE signal. However, LTE seems to quickly come back. Any suggestions on how to turn off LTE when I am home so that I force a connection to the Network Extender?
Click to expand...
Click to collapse
It worked with other Motorola devices in the past. CDMA only will fix your network extender issues.
You will have to set it back when you leave the house. Also it will go back to the default settings if you reboot. Works great for me.
Related
Is there any evidence that the USA is getting a Wifi-only version of the 7.7?
I find it ludacris Verizon wants 699.99 for theirs.. I have no need for the radio built in and the extreme premium they are asking.. I'm itching to have this tablet and don't really want to order it online..
Unless T-mobile is getting the 7.7 with their HSPA+ network support built (I have a T-mobile unlimited data sim dying to get inside a nice tablet).
Any ideas?
Why not order the wifi version from negri? They are a us retailer and very reputable and you can have it in less than a week.
They have it at a very good price
https://negrielectronics.com/samsung-p6810-galaxy-tab-7-7-16gb-wifi-only-white.html
Sent from my GT-P6800 using xda premium
Diversion said:
Is there any evidence that the USA is getting a Wifi-only version of the 7.7?
I find it ludacris Verizon wants 699.99 for theirs.. I have no need for the radio built in and the extreme premium they are asking.. I'm itching to have this tablet and don't really want to order it online..
Unless T-mobile is getting the 7.7 with their HSPA+ network support built (I have a T-mobile unlimited data sim dying to get inside a nice tablet).
Any ideas?
Click to expand...
Click to collapse
The majority of posters in the 7.7 forum bought their 6800/6810 online. I bought two with no problems. I presume we'll see a small influx of Verizon customers in the coming weeks, though.
But, I mean...what are you going to do? Buy it online or don't get one are your two options if you don't want Verizon's version.
Do any of the 3G versions work on T-mobile's network?
The P6800 does not work on the AWS frequency that T-mobile uses. If T-mobile ever converts its network to use the 1900MHz frequency nationwide it will work but there is no time table released to show if or when that might happen.
Diversion said:
Do any of the 3G versions work on T-mobile's network?
Click to expand...
Click to collapse
To be clear, it will work, but you will only get EDGE (2G) speeds in most of the country. I understand that AWS isn't required in some areas for T-Mobile, but you should expect to surf at EDGE speeds with the P6800.
What he said. Will it work on T-Mobile? Yes. Will the 3G work and be fast? Depending on where you are, probably not...
---------- Post added at 10:02 PM ---------- Previous post was at 10:00 PM ----------
If the 7.7 does come to the US in any form other than the LTE version, then it will likely ONLY be the wifi version. Carriers don't like all-in-one devices you see... That's why the LTE version doesn't double as a phone.
I'm assuming the LTE version can fall back onto Verizon's 3g network when 4g is not available, and or has a toggle (I would hope) to force 3g instead of 4g?
Diversion said:
I'm assuming the LTE version can fall back onto Verizon's 3g network when 4g is not available, and or has a toggle (I would hope) to force 3g instead of 4g?
Click to expand...
Click to collapse
Don't know about the toggle, but I would assume that, yes, assuming there's no LTE coverage, it will fall back to CDMA2000 or 1xRTT, whichever is available.
Jade Eyed Wolf said:
Don't know about the toggle, but I would assume that, yes, assuming there's no LTE coverage, it will fall back to CDMA2000 or 1xRTT, whichever is available.
Click to expand...
Click to collapse
Correct, the device switches between CDMA and LTE coverage depending on what is available, and there is the ability to force it to CDMA only.
What i'm concerned about though, is that there's no way to turn off the cellular modem and only use Wifi. I'm assuming that when Wifi is on, the cellular radio is also turned on (even if you don't have a data plan activated on the device) causing it to use more battery by continuously checking for a signal.
Can someone confirm if you can power down the modem seperately from Wifi? I don't see the point in needing a radio always on if you're not even paying for a Verizon plan.
Diversion said:
What i'm concerned about though, is that there's no way to turn off the cellular modem and only use Wifi. I'm assuming that when Wifi is on, the cellular radio is also turned on (even if you don't have a data plan activated on the device) causing it to use more battery by continuously checking for a signal.
Can someone confirm if you can power down the modem seperately from Wifi? I don't see the point in needing a radio always on if you're not even paying for a Verizon plan.
Click to expand...
Click to collapse
Doesn't every 3G/4G/LTE android device have a setting to turn off the mobile network? I have it on my phone and I have it on my original Galaxy Tab. Why do you think it would be different on this device?
Diversion said:
What i'm concerned about though, is that there's no way to turn off the cellular modem and only use Wifi. I'm assuming that when Wifi is on, the cellular radio is also turned on (even if you don't have a data plan activated on the device) causing it to use more battery by continuously checking for a signal.
Can someone confirm if you can power down the modem seperately from Wifi? I don't see the point in needing a radio always on if you're not even paying for a Verizon plan.
Click to expand...
Click to collapse
My Droid X turns off the 3g radio when wifi is connected. It would make sense that it worked the same way on the LTE 7.7.
murmur70 said:
My Droid X turns off the 3g radio when wifi is connected. It would make sense that it worked the same way on the LTE 7.7.
Click to expand...
Click to collapse
If your phone is still reporting signal bars when connected to Wifi, the radio is still turned on and using juice.
Paten said:
Doesn't every 3G/4G/LTE android device have a setting to turn off the mobile network? I have it on my phone and I have it on my original Galaxy Tab. Why do you think it would be different on this device?
Click to expand...
Click to collapse
Guess i'll have to go back into verizon and check the settings and see if they are treated seperately. Usually all wireless (cellular and wifi) are treated as a singular on/off switch. Can't usually literally power down the cell chip and keep the Wifi chip on.
Some devices can - but I want to make sure if this one can.
Diversion said:
What i'm concerned about though, is that there's no way to turn off the cellular modem and only use Wifi. I'm assuming that when Wifi is on, the cellular radio is also turned on (even if you don't have a data plan activated on the device) causing it to use more battery by continuously checking for a signal.
Can someone confirm if you can power down the modem seperately from Wifi? I don't see the point in needing a radio always on if you're not even paying for a Verizon plan.
Click to expand...
Click to collapse
(I wish XDA would move the Thanks button away from the Quote!)
Disabling Packet data will work fine. You can also put it in Airplane mode then just enable the radios you need.
burhanistan said:
(I wish XDA would move the Thanks button away from the Quote!)
Disabling Packet data will work fine. You can also put it in Airplane mode then just enable the radios you need.
Click to expand...
Click to collapse
Sure, disabling packet data works, but it's still not disabling the radio or tower hunting. I'll have to try the airplane mode thing, usually you can't have airplane mode ON and turn on other radios on without it pulling it out of airplane mode.
On my LTE version, On the Quick Settings bar there is a Mobile Data button you can select to toggle the mobile data on and off. It is independent of the Wifi.
Also, a nice touch, when you're not connected to WiFi and you go to access a data application such as the browser, it pops up a reminder along with the list of any in range wifi hot spots. You can disable this reminder, but it's a nice to have.
MileHighAko said:
On my LTE version, On the Quick Settings bar there is a Mobile Data button you can select to toggle the mobile data on and off. It is independent of the Wifi.
Also, a nice touch, when you're not connected to WiFi and you go to access a data application such as the browser, it pops up a reminder along with the list of any in range wifi hot spots. You can disable this reminder, but it's a nice to have.
Click to expand...
Click to collapse
Do you still see signal bars even when "mobile data" is turned off?
Diversion said:
Do you still see signal bars even when "mobile data" is turned off?
Click to expand...
Click to collapse
Wifi signal bars, yes. The same signal bars are used for wifi and 4G/3G. When you're in 4G or 3G it has a secondary indicator next to the signal bar.
I noticed that by default this phone is setup to use "Global" as the preferred network mode. I'm thinking that means it'll try to use CDMA, LTE, and GSM networks. I noticed there's a setting for "LTE / CDMA" and I'm thinking this setting may save some battery because the radio software wont try to use the non-existent GSM for Verizon.
Anyone play around with this setting and notice a difference? I just switched to LTE / CDMA. I lost data until I rebooted and now everything is working fine. It's odd that it was set as Global to begin with.
I did the same thing you did. I notice no difference but it does work fine. I also tried fooling around with lte on/off app. Is there a simple widget that can be used to toggle between 4g and 3g? If I know i won't be using the phone for a while i would like to switch to 3g to save battery.
skinien said:
I noticed that by default this phone is setup to use "Global" as the preferred network mode. I'm thinking that means it'll try to use CDMA, LTE, and GSM networks. I noticed there's a setting for "LTE / CDMA" and I'm thinking this setting may save some battery because the radio software wont try to use the non-existent GSM for Verizon.
Anyone play around with this setting and notice a difference? I just switched to LTE / CDMA. I lost data until I rebooted and now everything is working fine. It's odd that it was set as Global to begin with.
Click to expand...
Click to collapse
Bump.
Sent from my HTC One XL using xda premium
recDNA said:
I did the same thing you did. I notice no difference but it does work fine. I also tried fooling around with lte on/off app. Is there a simple widget that can be used to toggle between 4g and 3g? If I know i won't be using the phone for a while i would like to switch to 3g to save battery.
Click to expand...
Click to collapse
You can download an app called Phone Info -- open it up and go down to Network mode, select CDMA (Auto) that will force 3G only.
It will remain until you reboot.
I used to do this with my OG HD and it did save quite a bit of battery but in my semi-scientific tests the difference on the Maxx HD is almost nonexistent, certainly not worth the reduction in speed or the inability to use data and voice simultaneously.
I don't know if you noticed but, data and voice simultaneously is possible even in 3g mode with the razrHD Max. The greatest android phone verizon has ever offered.
Sent from my DROID RAZR HD using xda premium
Like the title says...
I have a LG G2 D800 (at&t flavor) unlocked that i use on my local carrier. All bands are the same just so you are aware so I know i don't the wrong radio in my phone.
WIth that being said....my phone locks onto LTE and works great while web searching or something, but after a few minutes it drops the LTE for H+ and erks my gerkin!
it's getting so annoying, this may be a reason my G2 finds itself on the selling floor.....any ideas why? or how i can make LTE the preferred connection and not H+/..
better yet, any one else having this issue? if so, what have you done?
For testing purposes, i play ingress and my phone will have a solid LTE signal, after i launch ingress it drops the LTE for H+ within 2 minutes and stays on H+......getting very frustrating!
It's not an issue. When companies approve the software, they also have a say in how it accesses the network. LTE is fully deployed, however they prefer you to use LTE and things when occasionally syncing, etc. When you browse the phone then picks up LTE as programmed while loading. Once connected it then drops back to HSPA as it's the "primary".
If you want to change to "LTE ONLY" you can do so by opening your dialer and typing *#*#4636#*#* then click "Phone Information" Scroll down to where you see Network and inside you should see "GSM/WCDMA/LTE" ...Click that and scroll up to LTE ONLY.
Be warned that you can't talk on LTE yet so you won't be able to use voice. VOLTE (Voice Over LTE) is only on Verizon and not even they have fully deployed it. Just choose "WCDMA/LTE" and you should see it using LTE more.
Hope that helps you out. Try to understand the tech before you get frustrated and talk abut selling it brother
Freshly_Snipes said:
It's not an issue. When companies approve the software, they also have a say in how it accesses the network. LTE is fully deployed, however they prefer you to use LTE and things when occasionally syncing, etc. When you browse the phone then picks up LTE as programmed while loading. Once connected it then drops back to HSPA as it's the "primary".
If you want to change to "LTE ONLY" you can do so by opening your dialer and typing *#*#4636#*#* then click "Phone Information" Scroll down to where you see Network and inside you should see "GSM/WCDMA/LTE" ...Click that and scroll up to LTE ONLY.
Be warned that you can't talk on LTE yet so you won't be able to use voice. VOLTE (Voice Over LTE) is only on Verizon and not even they have fully deployed it. Just choose "WCDMA/LTE" and you should see it using LTE more.
Hope that helps you out. Try to understand the tech before you get frustrated and talk abut selling it brother
Click to expand...
Click to collapse
thank you so much....i can't find those option in that menu though...i looked everywhere for that code and couldn't find it specifically for the LG G2 and just about gave up...didn't know they did that on purpose...thanks..not so angry now....gonna look through these menus some more
*********i don't have the network button...only "turn off radio" "SMS over IMS" and "turn on LTE ram dump"***** i would love to have LTE/WCDMA only...
I followed the instructions like another thread comment said to do but for some reason I couldn't get it to work still but after playing around I was able to get it working.
---- Instructions for enabling: (thanks eyecon82) ----
1. dial ##3282#
2. then click edit (need MSL code) (I used SPCUtility.apk as nothing else worked on my S5)
3. then click LTE
4. It will show LTE ( also known as Band 25), Band 3, Band 26, Band 41 ( I unchecked marked all of these but the LTE option leave that check marked to on)
5. Disable all bands leave LTE check mark to say on.
6. Go to the main directory by hitting back key and choose More at the bottom
7. Choose HDR/1X Selection and choose LTE only Mode. Click OK to save
8. You can either reboot or I just turn on airplane mode and turn it back off to reset the connection.
9. LTE should be working like mine did. But you will not get phone calls until you turn back on the HDR/1X Selection to LTE + CDMA +EVDO Mode but you will get text messages fine.
The items that are underlined in Red are the stuff i added.
---- To tell what Band on: ----
1. ##debug#
2. enter passcode 777468
3. go to LTE engineering menu
I hope this helps because all the other stuff I read would not work for my Galaxy S5 I just bought.
Thanks
One more thing
I read on here http://s4gru.com/index.php?/blog/1/...-due-to-circuit-switched-fallback-technology/
that this problem should be fixed soon but if you need LTE now here it is.
darhoade said:
I read on here http://s4gru.com/index.php?/blog/1/...-due-to-circuit-switched-fallback-technology/
that this problem should be fixed soon but if you need LTE now here it is.
Click to expand...
Click to collapse
Thanks for the info. However, I think its crazy to want to set it up for LTE when you cannot receive phone calls especially since this is you know, is a phone. Calling Sprint and talking about this situation is useless. They all say nothing is wrong and its the device. I'm really pissed off about this but I enjoy the phone. This will probably be the last Sprint phone I will get.
Sent from my SM-G900P using xda app-developers app
pastert33 said:
Thanks for the info. However, I think its crazy to want to set it up for LTE when you cannot receive phone calls especially since this is you know, is a phone. Calling Sprint and talking about this situation is useless. They all say nothing is wrong and its the device. I'm really pissed off about this but I enjoy the phone. This will probably be the last Sprint phone I will get.
Sent from my SM-G900P using xda app-developers app
Click to expand...
Click to collapse
I use it at night or in places that I need fast internet and when I know I dont need a phone for a bit which is why I have voicemail I just switch over to LTE for a bit and then back...but yes it sucks for now until they upgrade the tower over here with the feature needed to use LTE spark devices.
Im loyal to sprint but its becoming more and more hard to be loyal.
Probably just your area, not the phone.
Your area may have LTE but if it doesn't have the circuit fall back enabled yet (tri-band phones) can't drop the data to allow a call and thus they force you to remain on 3G only.
Once your area has everything done it should get better.
I have similar situation that KILLS my battery at home but in every other part of town it all works great :/
bryanu said:
Probably just your area, not the phone.
Your area may have LTE but if it doesn't have the circuit fall back enabled yet (tri-band phones) can't drop the data to allow a call and thus they force you to remain on 3G only.
Once your area has everything done it should get better.
I have similar situation that KILLS my battery at home but in every other part of town it all works great :/
Click to expand...
Click to collapse
Found out from reading the Sprint forums (https://community.sprint.com/baw/thread/157300?start=0&tstart=0), that this is likely not caused by the circuit fallback, but incomplete rollouts of Spark technology. Disabling the new Spark bands has helped me keep a stable LTE connection. Once the Spark rollout is complete in my area, and Band 26 can support both Voice and Data, I'll re-enable it the new spark bands.
sporklover said:
Found out from reading the Sprint forums (https://community.sprint.com/baw/thread/157300?start=0&tstart=0), that this is likely not caused by the circuit fallback, but incomplete rollouts of Spark technology. Disabling the new Spark bands has helped me keep a stable LTE connection. Once the Spark rollout is complete in my area, and Band 26 can support both Voice and Data, I'll re-enable it the new spark bands.
Click to expand...
Click to collapse
Which bands did you disable? Also, are you able to get voice calls when you LTE?
Im a bit frustrated be the place I spend most of my time (where I used to get LTE fine with my S3) I no longer get LTE and its super slow 3g. Calling sprint didn't help, they just say to wait until cell tower updates are finished in the next 6 months.
If I disable the Spart bands, will I be able to keep LTE and voice? Thanks
master4g said:
Which bands did you disable? Also, are you able to get voice calls when you LTE?
Im a bit frustrated be the place I spend most of my time (where I used to get LTE fine with my S3) I no longer get LTE and its super slow 3g. Calling sprint didn't help, they just say to wait until cell tower updates are finished in the next 6 months.
If I disable the Spart bands, will I be able to keep LTE and voice? Thanks
Click to expand...
Click to collapse
I disabled bands 26 and 41. This forces the phone to use the default sprint LTE band. It receives voice calls just fine.
sporklover said:
I disabled bands 26 and 41. This forces the phone to use the default sprint LTE band. It receives voice calls just fine.
Click to expand...
Click to collapse
But if you enabled the spark LTE bands like the default settings, will you LTE work or does it fall back to 3g? Thanks
master4g said:
But if you enabled the spark LTE bands like the default settings, will you LTE work or does it fall back to 3g? Thanks
Click to expand...
Click to collapse
LTE works fine because it defaults to the standard LTE band.
sporklover said:
LTE works fine because it defaults to the standard LTE band.
Click to expand...
Click to collapse
Then is there any benefit in disabling the other bands?
master4g said:
Then is there any benefit in disabling the other bands?
Click to expand...
Click to collapse
Read the sprint link. Incomplete rollout of spark, in particular on band 26 can cause the issue of not being able to switch between 4G and 3G and back.
Sorry, I'm a little new to the AT&T Note 3 as I was used to T-Mobile and their phones (still use their network by the way)...So, I was looking around to see if I could switch my network modes (e.g. GSM,WCDMA,LTE, or combinations of both). Its pretty helpful if you need to switch to WCDMA,GSM, or other modes. Some of you may know it, but I am new to this stuff and hopefully I help others who don't know much about this either. On your dialer, enter *#*#4636#*#* then press device information and you'll be able to switch network modes! Just found that out and wanted to enlighten others. Press that thumbs up if this was somewhat helpful!
we already know this but thanks. And to get 4G on an att note 3 is pretty much useless without enabling the AWS bands.
YoungDev said:
Sorry, I'm a little new to the AT&T Note 3 as I was used to T-Mobile and their phones (still use their network by the way)...So, I was looking around to see if I could switch my network modes (e.g. GSM,WCDMA,LTE, or combinations of both). Its pretty helpful if you need to switch to WCDMA,GSM, or other modes. Some of you may know it, but I am new to this stuff and hopefully I help others who don't know much about this either. On your dialer, enter *#*#4636#*#* then press device information and you'll be able to switch network modes! Just found that out and wanted to enlighten others. Press that thumbs up if this was somewhat helpful!
Click to expand...
Click to collapse
On all of my past AT&T Phones, I never had this stick for me. The phone would always switch back to LTE after a short time. I am using Intelli3G with Xposed and I can now successfully turn off LTE when I need to with a toggle.
PeteSeiler2010 said:
On all of my past AT&T Phones, I never had this stick for me. The phone would always switch back to LTE after a short time. I am using Intelli3G with Xposed and I can now successfully turn off LTE when I need to with a toggle.
Click to expand...
Click to collapse
Why do you switch to 3G, is 4G in your area spotty?
Netrunner157 said:
Why do you switch to 3G, is 4G in your area spotty?
Click to expand...
Click to collapse
The building that i work in seems to almost block the LTE signal for all AT&T phones. There are a few of us in my department that have issues with this. The phone will constantly switch between 4G and LTE, this also causes the phone battery to die faster. Since we can't flash an unlocked radio the Note 3, the Xposed module was my best bet. As soon as i switch over to the just 4G by making my phone use WCDM only, I have no issues with signal. Using the hidden menu, (*#*#4636#*#*), and switching it to WCDMA Only doesn't stick permanently. I had this issue once before with my Skyrocket, but with that phone you were able to flash a RAT Unlocked radio or a non-LTE radio on the phone and that would disable LTE as well. As soon as i step outside of my building, my LTE signal is strong and I have no issues at all.
In my jobs basement only people who get any sort of signal are people who have tmobile. Would this help me get signal as well?
It's worth a shot, it works flawlessly for me.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
I have to wonder if changing your network mode after a throttling would still allow good download speeds???????????????
Update: sadly changing to a different network mode does not work to remove a throttle. Neither does flashing a different modem. If only the bootloader was unlocked.... Crossing fingers and remaining hopeful with my blazing edge network speeds.: (
Can anyone tell me what the default mode is?