Database Users

How to force LTE/GSM/CDMA auto (PRL) or any other Preferred Network Type.

Hello, I have no problem receiving an LTE signal on BCE (Canada) through the Phone Info Menu. I can select any of the preferred network types including LTE, LTE/GSM, CDMA, LTE/GSM/CDMA but it won't stay. Every day I have to go back into the menu and it reverts back to the first selection "WCDMA".
Does anyone know how to force this so it stays on LTE/GSM/CDMA. So it will stay on the LTE-enabled network unless there is a loss of signal and it reverts back to HSPA? It does this automatically when "LTE/GSM/CDMA is selected, but again reverts to CDMA within a day usually.
I did some searches here, but 99% of what comes up is just people asking how to enable LTE or if their network gets it?
Any ideas? Maybe some sort of macro thing.
Regards.

Add this line in build prob
telephony.lteOnGsmDevice=1
Save
Reboot
Now in settings/more/mobile networks u will have an option to choose and it will stick. U have to add the line every time u flash ROMs.
But I keep iron WC DMA/gsm for better battery speed is OK on h+

Thanks for the helpful reply man. I haven't edited a build.prop yet, so Ill have to check it out.

Alright thats all done now, works like a charm. Like that I have the option now either way. I typically stick to WCDMA/GSM when on the road or at work where LTE is spotty, but on days off for around town I would rather just be on LTE as I usually just looking up something quick when Im shopping or something.
Thanks again.

solipsism said:
Alright thats all done now, works like a charm. Like that I have the option now either way. I typically stick to WCDMA/GSM when on the road or at work where LTE is spotty, but on days off for around town I would rather just be on LTE as I usually just looking up something quick when Im shopping or something.
Thanks again.
Click to expand...
Click to collapse
Nice
I keep it at LTE, it does have less bars but quality is same for me, speeds are amazing. Also 4G is only data, not voice, so when u have an active call it will change to 3G.(but that's not the phone it's the network)
don't forget to do it again if you flash new ROM, also Tethering WiFi won;t work, there is a fix but it's complected for me, so I just go to W/G if I need to share connection.

So, my Nexus 4 shipped today, and it'll be in my grubby little hands by tomorrow evening. I, unfortunately, can't activate it until March, as I have to wait for my Verizon contract to end, but I keep seeing this LTE stuff, with no real explanation. I do know that the Nexus 4 has an inactive LTE radio in it, but what's the use of activating it, if T-Mobile doesn't have LTE? Is this only for the AT&T users?
JR

jacknifetoaswan said:
So, my Nexus 4 shipped today, and it'll be in my grubby little hands by tomorrow evening. I, unfortunately, can't activate it until March, as I have to wait for my Verizon contract to end, but I keep seeing this LTE stuff, with no real explanation. I do know that the Nexus 4 has an inactive LTE radio in it, but what's the use of activating it, if T-Mobile doesn't have LTE? Is this only for the AT&T users?
JR
Click to expand...
Click to collapse
There are other threads dealing with who can access LTE in the USA. I am in Canada and on Bell.

I'm in Canada, using Fido. I activate the LTE on my Nexus 4. It works fine, but I'm not able to share internet with wifi hotspot.
I have Android 4.2.1 (latest OTA from Google).
There is a bug with this version or it's only because I activate LTE manually ?

As per the previous comment:
odeccacccp said:
Nice
I keep it at LTE, it does have less bars but quality is same for me, speeds are amazing. Also 4G is only data, not voice, so when u have an active call it will change to 3G.(but that's not the phone it's the network)
don't forget to do it again if you flash new ROM, also Tethering WiFi won;t work, there is a fix but it's complected for me, so I just go to W/G if I need to share connection.
Click to expand...
Click to collapse

what is the fix to get hotspot internet sharing with the Nexus 4 ? Do i have to had a APn for 3G and swith that it to share my connection ?
I'm with the original firmware. Android 4.2.1

process com.android,phone hase stopped working
i recently got a rom from revolt on my n4 and i switched cdma to lte gsm wcdma auto
i also went into build.prop and wrote down telephony.lteOnGsmDevice=1. i went and to setting, more, mobile networks chose the correct setting. so now i got 4G. great i can make calls. GREAT. but i cannot receive calls...
need help with this. im really choked about this ROM

Even if I select "LTE/CDMA" in the Mobile network settings menu. The settings page keeps displaying "CDMA preferred".
Does this mean it didn't work? In quick settings, I see my mobile data connection as 3G Bell.
LTE only seems to work when using the *#*#4636*#*# trick in the Phone app.

odeccacccp said:
Add this line in build prob
telephony.lteOnGsmDevice=1
Save
Reboot
Now in settings/more/mobile networks u will have an option to choose and it will stick. U have to add the line every time u flash ROMs.
But I keep iron WC DMA/gsm for better battery speed is OK on h+
Click to expand...
Click to collapse
Would you have by any chance the line for the built.prop to stick the setting to GSM Auto (PRL)?
TIA!

odeccacccp said:
Add this line in build prob
telephony.lteOnGsmDevice=1
Save
Reboot
Now in settings/more/mobile networks u will have an option to choose and it will stick. U have to add the line every time u flash ROMs.
But I keep iron WC DMA/gsm for better battery speed is OK on h+
Click to expand...
Click to collapse
Thanks, but LTE doesn't work in my country, its always stick on lte/gsm/wcdma but it doesnt detect my gsm so i have to manually set it on GSM only but wont stick here every time i restart my phone i have manually set it on GSM only otherwise it wont detect my network
Any advice ?

How can I make "WCDMA Only" the default selection?
Where I Iive there is no LTE and the coverage of the service is quite poor, so the phone keeps jumping between E and 3G/H. I have to manually go into the phone app and select "WCDMA Only" is there a build prop tweak to make the "WCDMA Only" the default option instead of "WCDMA Preferred"?
Thank you.

So is there a way to get the nexus 4 to work on Verizon ??

spooony said:
So is there a way to get the nexus 4 to work on Verizon ??
Click to expand...
Click to collapse
No. Completely different technology.
Sent from my Nexus 7 using xda premium

Dial *#*#4636#*#* then phone information then select what you prefer.
Sent from my Nexus 4 using xda premium

El Daddy said:
No. Completely different technology.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Aah Crap ! Well thanks man saved me from buying on guess i will have to stick with my rezound for now then

fixed it
For everyone still searching for a solution to this problem, this worked for me. Go to phone information and turn your radio off. Then switch to LTE/GSM/CDMA then power down, DO NOT TURN YOUR RADIO BACK ON. Now remove your Sim card, put it back in, reboot and you should be good to go. DO NOT HGO BACK INTO PHONE INFORMATION OR ELSE IT WILL NOT STAY
If it still isn't connecting try fiddling around with your APN settings.

Force LTE?

Sometimes I drop to 3G in my home 4G area. Turning the phone off and back on usually does the trick but is there another way to keep the 4G connection?
Sent from my XT907 using xda app-developers app

zombolt said:
Sometimes I drop to 3G in my home 4G area. Turning the phone off and back on usually does the trick but is there another way to keep the 4G connection?
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
I believe you can set the phone to only receive CDMA and LTE in the Mobile Networks option of the settings (in the more section)
You can also set it to receive only GSM, GSM and CDMA, or all available networks.

Leraeniesh said:
I believe you can set the phone to only receive CDMA and LTE in the Mobile Networks option of the settings (in the more section)
You can also set it to receive only GSM, GSM and CDMA, or all available networks.
Click to expand...
Click to collapse
CDMA=3G, LTE=4G. Right? Since I am on the Verizon network, the only circumstances that I would connect to GSM is if I left the USA, right? I wonder if there's a way to isolate LTE connectivity and turn off 3G all together..
Sent from my XT907 using xda app-developers app

zombolt said:
CDMA=3G, LTE=4G. Right? Since I am on the Verizon network, the only circumstances that I would connect to GSM is if I left the USA, right? I wonder if there's a way to isolate LTE connectivity and turn off 3G all together..
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
You on stock or a custom ROM?
That sounds like a radio problem tbh.
You can't use LTE only - in fact, LTE requires a CDMA or GSM base for stuff like phone calls so it always has to be connected to 3g or 1x.
There's a possibility that switching airplane mode or pulling your SIM out would force LTE to reconnect

Solution: Yes you can force lte
I'm not a engineer or a radio analyst but I do believe what the previous post says about LTE needing CDMA is completely wrong - it certainly doesn't need to have CDMA or any other radio band to effect LTE. That being said, LTE is BASED off of 3G CDMA. But again, I may be inaccurate, however I think the "proof is in the pudding"......HOW TO FORCE TO LTE (ONLY)
1. Open up your phones dial pad
2. Dial *#*#4636#*#* (An app with the title "Testing" should open automatically... but not 100% sure. If it doesn't open auto hit dial....
3. Select "Phone Information"
4. Scroll down the phone information page, you should see the first button that says "Turn off radio"..... We want to focus on the item right above that. By default it's set to "LTE/CDMA/EvDo/GSM/WCDMA"
5. Click on that which should provide a drop down list, with specific radio bands.
6. In your case select "LTE Only"
7. Profit!
FYI: IN "LTE Only" mode you will not be able to make or receive calls - this is good for DATA only. You can manually reset back to default mode but regardless every time your phone reboots it will go back to default.

Well yeah that's true. Not really sure if vzw will let you connect though. But yeah no calls or text
Sent from my XT907 using Tapatalk 4

Network coverage issues or device ?

I'm having some problems with my G2 - I don't have good 3G coverage especially inside and my phone keeps dropping calls when on 3G. It seems the software doesn't reconnect that fast and doesn't switch to 2G when the 3G signal is too low. Is there any way to change the preferred network and stop the device being so agressive at keeping 3G connection?

Settings/networks/tethering & networks/mobile networks/network mode/GSM only.

I already know that. It is the most unhelpful advice to give. I have to constantly go into settings and change that? No way. It isn't in the notification toggles which is really odd. Any idea how to add it? I feel my G2 has some radio issues.
Sent from my LG-D802 using Tapatalk

axlastro said:
I already know that. It is the most unhelpful advice to give. I have to constantly go into settings and change that? No way. It isn't in the notification toggles which is really odd. Any idea how to add it? I feel my G2 has some radio issues.
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
Well if you're going to be like that then there's no wonder why there aren't a stream of responses on here with people trying to help you out.
Just remember, you're the one with the problem, so you may want to be a little nicer to those that try to give you help.

I'm sorry about that, but there wasn't a stream of responses in the first place. He was just stating the obvious, and the obvious is that the G2 doesn,t have a shortcut to switch between 2g and 3g. I'm just trying to figure out a way to do that, but all the apps that claim to do that and they are too many of them, just don't work. I'm thankful for any help, don't get me wrong.
Sent from my LG-D802 using Tapatalk

axlastro said:
I'm sorry about that, but there wasn't a stream of responses in the first place. He was just stating the obvious, and the obvious is that the G2 doesn,t have a shortcut to switch between 2g and 3g. I'm just trying to figure out a way to do that, but all the apps that claim to do that and they are too many of them, just don't work. I'm thankful for any help, don't get me wrong.
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
There isn't a solution as simple as hitting a switch, but you can try the following:
Go into your Dialer and tap in *#*#4636#*#*
This will take you into the Testing Menu
Select 'Phone Information'
Then about half way down you will have a drop down where you can "Set preferred network type:"
This will allow you to choose whether to use 2G or 3G, but more important to your case you can choose how it will react if signal strength is low.
You probably want to select something like "GSM auto (PRL)"
Bare in mind though that this option will reset itself back to original setting each time you reboot the device.
Now I don't know if this will solve your problem, but it is worth testing out.
Here's a list detailing the main available options:
WCDMA preferred - The GSM phone is capable of using both 2G and 3G data communication and when signal strength is low 3G is favored more.
GSM only - The GSM phone is capable of using only 2G data communication. When the 2G signal is too low you get nothing at all.
WCDMA only - The GSM phone is capable of using only 3G data communication. When the 3G signal is too low you get nothing at all.
GSM auto (PRL) - The GSM phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more.
CDMA auto (PRL) - The CDMA phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more.
CDMA only - The CDMA phone is capable of using only 2G data communication. When the 2G signal is too low you get nothing at all.
EvDo only - The CDMA phone is capable of using only 3G data communication. When the 3G signal is too low you get nothing at all.
GSM/CDMA auto (PRL) - Some phones are equipped with both GSM and CDMA capabilities. This setting appears to just have the phone attempt to stay connected to the data communication type that works the best.
Unknown - If none of the above fit or the phone is acting weird as far as connecting to the carrier, you will see your preferred network type is set to this

Wnderful setting.. amazing speed... performance of handset increased like rocket..
Thanks a lot...

Hi,
After dialing *#*#4636#*#*, it shows up the menu.
But i am not able to select Phone Information option. It says "This application does not work on this device".
Phone info: LG G2 D802 - Rooted - PowerG2 2.1 ROM.
I face frequent network signal drop, I tried CloudyG2 ROM also.
Thanks !

4g / LTE Toggle / radio control

At work the 4g LTE signal for ATT is very poor in the building, but we have 4g repeaters for ATT to fix this issue. Unfortunately, phones are stubborn and like to stay on 4g LTE despite having 1 bar of signal vs full signal with 4g. I had this same issue on my iphone 5 but was able to easily force off LTE while i was at work and have a steady, reliable data connection. My Note 4 seems to have the same affinity to wanting to be on 1 bar of LTE, but I cannot figure out a way to toggle / force LTE off and just use 4g. Anyone have any ideas? Anyone know of an application I can use to resolve this issue?
Thanks

try settings...more networks...mobile networks....network mode....It should be in there..I have the sprint model so I don't know for sure...but that is where mine is....hope this helps

djboo4you said:
try settings...more networks...mobile networks....network mode....It should be in there..I have the sprint model so I don't know for sure...but that is where mine is....hope this helps
Click to expand...
Click to collapse
Unfortunately, there is no option for Network mode on the ATT version. I wonder if this has to do with voLTE....
I did find a backway to the network mode via *#*#4636#*#* but I am unsure of what I should be setting to "disable" lte while I'm in the building at work.

I think I've sorted this out now. If I change LTE/GSM AUTO to WCDMA preferred it seems to immediately switch and hold onto 4G. I do have to change it back. Maybe I will write something so I can quick toggle this since nothing on the app store seems to work.

hi,
If you are rooted ? You can use an xpose module called Intelli3G
I use it on my phone ,works 100% and switches smoothly/fast between eg 4G..3G automatic
eg if my data is of its on 3G as soon as i switch data on /wifi it changes to 4 G
For interest sake ,here is a link to market ,you can read desciption what it does ?
https://play.google.com/store/apps/details?id=com.voidvapps.intelli3g&hl=en
good luck

Verizon users, lend me your ears!

I started out with USCC on this device. But last week I switched ourn lines over to big red. I noticed that big red forces you to use LTE, with no options under "cellular networks" to select CDMA. Here in Maine, LTE drains your battery 50% faster than CDMA, and data is wonky. It tends to be slower than CDMA, or at least feels slower because it is constantly switching between the 2 or hanging in limbo.
My phone was set to CDMA on USCC, and even after switching to Verizon, I'm still on CDMA. My question is, if I return to stock LP will it force me into LTE -with no choice of switching back to CDMA? So far, Marshmallow has been a huge disappointment on my phone.

HikingMoose said:
I started out with USCC on this device. But last week I switched ourn lines over to big red. I noticed that big red forces you to use LTE, with no options under "cellular networks" to select CDMA. Here in Maine, LTE drains your battery 50% faster than CDMA, and data is wonky. It tends to be slower than CDMA, or at least feels slower because it is constantly switching between the 2 or hanging in limbo.
My phone was set to CDMA on USCC, and even after switching to Verizon, I'm still on CDMA. My question is, if I return to stock LP will it force me into LTE -with no choice of switching back to CDMA? So far, Marshmallow has been a huge disappointment on my phone.
Click to expand...
Click to collapse
Just go into hidden menu via dialer and force your phone into CDMA or LTE or whatever you want. It's simple really and will give you what you want.

Well, is there a "new to Verizon" guide somewhere? Verizon didn't tell me about the secret codes. I don't even know how to do an advanced prl update.

I should have clarified that I've only ever been on USCC. I've never used Verizon. But I do vaguely remember reading about a hidden dialer code now that you mention it. I'll look into that.

HikingMoose said:
Well, is there a "new to Verizon" guide somewhere? Verizon didn't tell me about the secret codes. I don't even know how to do an advanced prl update.
Click to expand...
Click to collapse
This is android secret code not Verizon.
*#*#4636#*#*

Thanks. Never needed it because us cellular already offers that.

HikingMoose said:
Thanks. Never needed it because us cellular already offers that.
Click to expand...
Click to collapse
It's not a that they don't offer that 99% of the time you are better off on LTE so its good that phones prefer LTE. Most likely your other phone simply had that option not hidden unlike on Moto. So that wasn't a ussc feature
Sent from my XT1575 using Tapatalk

Agree to disagree. The data speeds are about the same here, but with the constant handoffs, LTE actually becomes slower and pages won't load because it's switching to 3G and back to LTE over, and over, and over. Plus the added battery drain off having 15-20dBm weaker signal, it's a no brainer. But maybe that's just in our less developed state.
The Samsung phone that I bought for my wife has no CDMA provisions, so it's not a Moto thing, it's a Verizon thing.

You can also download the thunder bolt lte on/off app and you have choices like CDMA auto prl. I use it to force CDMA only on my range extender at home.

Use shortcut creator to link to the hidden menu and your all set

HikingMoose said:
Agree to disagree. The data speeds are about the same here, but with the constant handoffs, LTE actually becomes slower and pages won't load because it's switching to 3G and back to LTE over, and over, and over. Plus the added battery drain off having 15-20dBm weaker signal, it's a no brainer. But maybe that's just in our less developed state.
The Samsung phone that I bought for my wife has no CDMA provisions, so it's not a Moto thing, it's a Verizon thing.
Click to expand...
Click to collapse
This device doesn't run Verizon branded firmware at all. It's how Motorola provisioned the device to work. Like patt2k said you can change that via the hidden menu and you should be good to go, it won't look for LTE after that.

Oaklands said:
You can also download the thunder bolt lte on/off app and you have choices like CDMA auto prl. I use it to force CDMA only on my range extender at home.
Click to expand...
Click to collapse
There seem to be many LTE on/off utilities in the App store. How did you pick this one?
I also have a Verizon Network Extender at home. I have trouble getting connected to it. I often have to reboot or turn the radio on/off to get my phone to connect to the Extender. I would appreciate any advice on how to get my phone to connect to the Extender more reliably.
It would also be nice if the phone would show via an Icon or screen that it is connected to the Extender. Right now the only way to know is to dial #48
EDIT: When I go into the Hidden Menu and select CDMA only, the phone temporary drops the LTE signal. However, LTE seems to quickly come back. Any suggestions on how to turn off LTE when I am home so that I force a connection to the Network Extender?

I can't get the hidden menu to switch from CDMA to LTE. It will switch temporarily, then drop the radio altogether forcing me to restart. Upon restart it's in CDMA only again. Personally, I'm fine without LTE. But I'm not sure why I can't get it enabled at all. I'd like to know I COULD have LTE if I wanted it. So I'm confused why it's stuck in CDMA

swieder711 said:
There seem to be many LTE on/off utilities in the App store. How did you pick this one?
I also have a Verizon Network Extender at home. I have trouble getting connected to it. I often have to reboot or turn the radio on/off to get my phone to connect to the Extender. I would appreciate any advice on how to get my phone to connect to the Extender more reliably.
It would also be nice if the phone would show via an Icon or screen that it is connected to the Extender. Right now the only way to know is to dial #48
EDIT: When I go into the Hidden Menu and select CDMA only, the phone temporary drops the LTE signal. However, LTE seems to quickly come back. Any suggestions on how to turn off LTE when I am home so that I force a connection to the Network Extender?
Click to expand...
Click to collapse
It worked with other Motorola devices in the past. CDMA only will fix your network extender issues.
You will have to set it back when you leave the house. Also it will go back to the default settings if you reboot. Works great for me.