Related
Hello, I have no problem receiving an LTE signal on BCE (Canada) through the Phone Info Menu. I can select any of the preferred network types including LTE, LTE/GSM, CDMA, LTE/GSM/CDMA but it won't stay. Every day I have to go back into the menu and it reverts back to the first selection "WCDMA".
Does anyone know how to force this so it stays on LTE/GSM/CDMA. So it will stay on the LTE-enabled network unless there is a loss of signal and it reverts back to HSPA? It does this automatically when "LTE/GSM/CDMA is selected, but again reverts to CDMA within a day usually.
I did some searches here, but 99% of what comes up is just people asking how to enable LTE or if their network gets it?
Any ideas? Maybe some sort of macro thing.
Regards.
Add this line in build prob
telephony.lteOnGsmDevice=1
Save
Reboot
Now in settings/more/mobile networks u will have an option to choose and it will stick. U have to add the line every time u flash ROMs.
But I keep iron WC DMA/gsm for better battery speed is OK on h+
Thanks for the helpful reply man. I haven't edited a build.prop yet, so Ill have to check it out.
Alright thats all done now, works like a charm. Like that I have the option now either way. I typically stick to WCDMA/GSM when on the road or at work where LTE is spotty, but on days off for around town I would rather just be on LTE as I usually just looking up something quick when Im shopping or something.
Thanks again.
solipsism said:
Alright thats all done now, works like a charm. Like that I have the option now either way. I typically stick to WCDMA/GSM when on the road or at work where LTE is spotty, but on days off for around town I would rather just be on LTE as I usually just looking up something quick when Im shopping or something.
Thanks again.
Click to expand...
Click to collapse
Nice
I keep it at LTE, it does have less bars but quality is same for me, speeds are amazing. Also 4G is only data, not voice, so when u have an active call it will change to 3G.(but that's not the phone it's the network)
don't forget to do it again if you flash new ROM, also Tethering WiFi won;t work, there is a fix but it's complected for me, so I just go to W/G if I need to share connection.
So, my Nexus 4 shipped today, and it'll be in my grubby little hands by tomorrow evening. I, unfortunately, can't activate it until March, as I have to wait for my Verizon contract to end, but I keep seeing this LTE stuff, with no real explanation. I do know that the Nexus 4 has an inactive LTE radio in it, but what's the use of activating it, if T-Mobile doesn't have LTE? Is this only for the AT&T users?
JR
jacknifetoaswan said:
So, my Nexus 4 shipped today, and it'll be in my grubby little hands by tomorrow evening. I, unfortunately, can't activate it until March, as I have to wait for my Verizon contract to end, but I keep seeing this LTE stuff, with no real explanation. I do know that the Nexus 4 has an inactive LTE radio in it, but what's the use of activating it, if T-Mobile doesn't have LTE? Is this only for the AT&T users?
JR
Click to expand...
Click to collapse
There are other threads dealing with who can access LTE in the USA. I am in Canada and on Bell.
I'm in Canada, using Fido. I activate the LTE on my Nexus 4. It works fine, but I'm not able to share internet with wifi hotspot.
I have Android 4.2.1 (latest OTA from Google).
There is a bug with this version or it's only because I activate LTE manually ?
As per the previous comment:
odeccacccp said:
Nice
I keep it at LTE, it does have less bars but quality is same for me, speeds are amazing. Also 4G is only data, not voice, so when u have an active call it will change to 3G.(but that's not the phone it's the network)
don't forget to do it again if you flash new ROM, also Tethering WiFi won;t work, there is a fix but it's complected for me, so I just go to W/G if I need to share connection.
Click to expand...
Click to collapse
what is the fix to get hotspot internet sharing with the Nexus 4 ? Do i have to had a APn for 3G and swith that it to share my connection ?
I'm with the original firmware. Android 4.2.1
process com.android,phone hase stopped working
i recently got a rom from revolt on my n4 and i switched cdma to lte gsm wcdma auto
i also went into build.prop and wrote down telephony.lteOnGsmDevice=1. i went and to setting, more, mobile networks chose the correct setting. so now i got 4G. great i can make calls. GREAT. but i cannot receive calls...
need help with this. im really choked about this ROM
Even if I select "LTE/CDMA" in the Mobile network settings menu. The settings page keeps displaying "CDMA preferred".
Does this mean it didn't work? In quick settings, I see my mobile data connection as 3G Bell.
LTE only seems to work when using the *#*#4636*#*# trick in the Phone app.
odeccacccp said:
Add this line in build prob
telephony.lteOnGsmDevice=1
Save
Reboot
Now in settings/more/mobile networks u will have an option to choose and it will stick. U have to add the line every time u flash ROMs.
But I keep iron WC DMA/gsm for better battery speed is OK on h+
Click to expand...
Click to collapse
Would you have by any chance the line for the built.prop to stick the setting to GSM Auto (PRL)?
TIA!
odeccacccp said:
Add this line in build prob
telephony.lteOnGsmDevice=1
Save
Reboot
Now in settings/more/mobile networks u will have an option to choose and it will stick. U have to add the line every time u flash ROMs.
But I keep iron WC DMA/gsm for better battery speed is OK on h+
Click to expand...
Click to collapse
Thanks, but LTE doesn't work in my country, its always stick on lte/gsm/wcdma but it doesnt detect my gsm so i have to manually set it on GSM only but wont stick here every time i restart my phone i have manually set it on GSM only otherwise it wont detect my network
Any advice ?
How can I make "WCDMA Only" the default selection?
Where I Iive there is no LTE and the coverage of the service is quite poor, so the phone keeps jumping between E and 3G/H. I have to manually go into the phone app and select "WCDMA Only" is there a build prop tweak to make the "WCDMA Only" the default option instead of "WCDMA Preferred"?
Thank you.
So is there a way to get the nexus 4 to work on Verizon ??
spooony said:
So is there a way to get the nexus 4 to work on Verizon ??
Click to expand...
Click to collapse
No. Completely different technology.
Sent from my Nexus 7 using xda premium
Dial *#*#4636#*#* then phone information then select what you prefer.
Sent from my Nexus 4 using xda premium
El Daddy said:
No. Completely different technology.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Aah Crap ! Well thanks man saved me from buying on guess i will have to stick with my rezound for now then
fixed it
For everyone still searching for a solution to this problem, this worked for me. Go to phone information and turn your radio off. Then switch to LTE/GSM/CDMA then power down, DO NOT TURN YOUR RADIO BACK ON. Now remove your Sim card, put it back in, reboot and you should be good to go. DO NOT HGO BACK INTO PHONE INFORMATION OR ELSE IT WILL NOT STAY
If it still isn't connecting try fiddling around with your APN settings.
I followed the instructions like another thread comment said to do but for some reason I couldn't get it to work still but after playing around I was able to get it working.
---- Instructions for enabling: (thanks eyecon82) ----
1. dial ##3282#
2. then click edit (need MSL code) (I used SPCUtility.apk as nothing else worked on my S5)
3. then click LTE
4. It will show LTE ( also known as Band 25), Band 3, Band 26, Band 41 ( I unchecked marked all of these but the LTE option leave that check marked to on)
5. Disable all bands leave LTE check mark to say on.
6. Go to the main directory by hitting back key and choose More at the bottom
7. Choose HDR/1X Selection and choose LTE only Mode. Click OK to save
8. You can either reboot or I just turn on airplane mode and turn it back off to reset the connection.
9. LTE should be working like mine did. But you will not get phone calls until you turn back on the HDR/1X Selection to LTE + CDMA +EVDO Mode but you will get text messages fine.
The items that are underlined in Red are the stuff i added.
---- To tell what Band on: ----
1. ##debug#
2. enter passcode 777468
3. go to LTE engineering menu
I hope this helps because all the other stuff I read would not work for my Galaxy S5 I just bought.
Thanks
One more thing
I read on here http://s4gru.com/index.php?/blog/1/...-due-to-circuit-switched-fallback-technology/
that this problem should be fixed soon but if you need LTE now here it is.
darhoade said:
I read on here http://s4gru.com/index.php?/blog/1/...-due-to-circuit-switched-fallback-technology/
that this problem should be fixed soon but if you need LTE now here it is.
Click to expand...
Click to collapse
Thanks for the info. However, I think its crazy to want to set it up for LTE when you cannot receive phone calls especially since this is you know, is a phone. Calling Sprint and talking about this situation is useless. They all say nothing is wrong and its the device. I'm really pissed off about this but I enjoy the phone. This will probably be the last Sprint phone I will get.
Sent from my SM-G900P using xda app-developers app
pastert33 said:
Thanks for the info. However, I think its crazy to want to set it up for LTE when you cannot receive phone calls especially since this is you know, is a phone. Calling Sprint and talking about this situation is useless. They all say nothing is wrong and its the device. I'm really pissed off about this but I enjoy the phone. This will probably be the last Sprint phone I will get.
Sent from my SM-G900P using xda app-developers app
Click to expand...
Click to collapse
I use it at night or in places that I need fast internet and when I know I dont need a phone for a bit which is why I have voicemail I just switch over to LTE for a bit and then back...but yes it sucks for now until they upgrade the tower over here with the feature needed to use LTE spark devices.
Im loyal to sprint but its becoming more and more hard to be loyal.
Probably just your area, not the phone.
Your area may have LTE but if it doesn't have the circuit fall back enabled yet (tri-band phones) can't drop the data to allow a call and thus they force you to remain on 3G only.
Once your area has everything done it should get better.
I have similar situation that KILLS my battery at home but in every other part of town it all works great :/
bryanu said:
Probably just your area, not the phone.
Your area may have LTE but if it doesn't have the circuit fall back enabled yet (tri-band phones) can't drop the data to allow a call and thus they force you to remain on 3G only.
Once your area has everything done it should get better.
I have similar situation that KILLS my battery at home but in every other part of town it all works great :/
Click to expand...
Click to collapse
Found out from reading the Sprint forums (https://community.sprint.com/baw/thread/157300?start=0&tstart=0), that this is likely not caused by the circuit fallback, but incomplete rollouts of Spark technology. Disabling the new Spark bands has helped me keep a stable LTE connection. Once the Spark rollout is complete in my area, and Band 26 can support both Voice and Data, I'll re-enable it the new spark bands.
sporklover said:
Found out from reading the Sprint forums (https://community.sprint.com/baw/thread/157300?start=0&tstart=0), that this is likely not caused by the circuit fallback, but incomplete rollouts of Spark technology. Disabling the new Spark bands has helped me keep a stable LTE connection. Once the Spark rollout is complete in my area, and Band 26 can support both Voice and Data, I'll re-enable it the new spark bands.
Click to expand...
Click to collapse
Which bands did you disable? Also, are you able to get voice calls when you LTE?
Im a bit frustrated be the place I spend most of my time (where I used to get LTE fine with my S3) I no longer get LTE and its super slow 3g. Calling sprint didn't help, they just say to wait until cell tower updates are finished in the next 6 months.
If I disable the Spart bands, will I be able to keep LTE and voice? Thanks
master4g said:
Which bands did you disable? Also, are you able to get voice calls when you LTE?
Im a bit frustrated be the place I spend most of my time (where I used to get LTE fine with my S3) I no longer get LTE and its super slow 3g. Calling sprint didn't help, they just say to wait until cell tower updates are finished in the next 6 months.
If I disable the Spart bands, will I be able to keep LTE and voice? Thanks
Click to expand...
Click to collapse
I disabled bands 26 and 41. This forces the phone to use the default sprint LTE band. It receives voice calls just fine.
sporklover said:
I disabled bands 26 and 41. This forces the phone to use the default sprint LTE band. It receives voice calls just fine.
Click to expand...
Click to collapse
But if you enabled the spark LTE bands like the default settings, will you LTE work or does it fall back to 3g? Thanks
master4g said:
But if you enabled the spark LTE bands like the default settings, will you LTE work or does it fall back to 3g? Thanks
Click to expand...
Click to collapse
LTE works fine because it defaults to the standard LTE band.
sporklover said:
LTE works fine because it defaults to the standard LTE band.
Click to expand...
Click to collapse
Then is there any benefit in disabling the other bands?
master4g said:
Then is there any benefit in disabling the other bands?
Click to expand...
Click to collapse
Read the sprint link. Incomplete rollout of spark, in particular on band 26 can cause the issue of not being able to switch between 4G and 3G and back.
Sorry, I'm a little new to the AT&T Note 3 as I was used to T-Mobile and their phones (still use their network by the way)...So, I was looking around to see if I could switch my network modes (e.g. GSM,WCDMA,LTE, or combinations of both). Its pretty helpful if you need to switch to WCDMA,GSM, or other modes. Some of you may know it, but I am new to this stuff and hopefully I help others who don't know much about this either. On your dialer, enter *#*#4636#*#* then press device information and you'll be able to switch network modes! Just found that out and wanted to enlighten others. Press that thumbs up if this was somewhat helpful!
we already know this but thanks. And to get 4G on an att note 3 is pretty much useless without enabling the AWS bands.
YoungDev said:
Sorry, I'm a little new to the AT&T Note 3 as I was used to T-Mobile and their phones (still use their network by the way)...So, I was looking around to see if I could switch my network modes (e.g. GSM,WCDMA,LTE, or combinations of both). Its pretty helpful if you need to switch to WCDMA,GSM, or other modes. Some of you may know it, but I am new to this stuff and hopefully I help others who don't know much about this either. On your dialer, enter *#*#4636#*#* then press device information and you'll be able to switch network modes! Just found that out and wanted to enlighten others. Press that thumbs up if this was somewhat helpful!
Click to expand...
Click to collapse
On all of my past AT&T Phones, I never had this stick for me. The phone would always switch back to LTE after a short time. I am using Intelli3G with Xposed and I can now successfully turn off LTE when I need to with a toggle.
PeteSeiler2010 said:
On all of my past AT&T Phones, I never had this stick for me. The phone would always switch back to LTE after a short time. I am using Intelli3G with Xposed and I can now successfully turn off LTE when I need to with a toggle.
Click to expand...
Click to collapse
Why do you switch to 3G, is 4G in your area spotty?
Netrunner157 said:
Why do you switch to 3G, is 4G in your area spotty?
Click to expand...
Click to collapse
The building that i work in seems to almost block the LTE signal for all AT&T phones. There are a few of us in my department that have issues with this. The phone will constantly switch between 4G and LTE, this also causes the phone battery to die faster. Since we can't flash an unlocked radio the Note 3, the Xposed module was my best bet. As soon as i switch over to the just 4G by making my phone use WCDM only, I have no issues with signal. Using the hidden menu, (*#*#4636#*#*), and switching it to WCDMA Only doesn't stick permanently. I had this issue once before with my Skyrocket, but with that phone you were able to flash a RAT Unlocked radio or a non-LTE radio on the phone and that would disable LTE as well. As soon as i step outside of my building, my LTE signal is strong and I have no issues at all.
In my jobs basement only people who get any sort of signal are people who have tmobile. Would this help me get signal as well?
It's worth a shot, it works flawlessly for me.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
I have to wonder if changing your network mode after a throttling would still allow good download speeds???????????????
Update: sadly changing to a different network mode does not work to remove a throttle. Neither does flashing a different modem. If only the bootloader was unlocked.... Crossing fingers and remaining hopeful with my blazing edge network speeds.: (
Can anyone tell me what the default mode is?
Hi,
did anyone using Umi Super have any problems with using 4G at 800MHz? Im on giffgaff and even though Umi Super is supposed to work at 4G under 800MHz (thats what the specification states) i cant manage to make it work. I have perfect 4G coverage, 4G sim, 4G tariff, even gave my sim to a friend with S7 edge and it worked on his phone. Maybe new update will fix that? I tried with different sim from different operator (LYCA) and it works but 4G in LYCA is at 2100MHz so I didnt really check the 800. I tried everything and still nothing. Did anyone have similar problem?
I actually bought 2 phones of the same model so I decided to check if 4G worked on the other one and as I put the sim card in I just remembered something and realized same thing happened with my phone. When I put the SIM card in for the first time it DID automatically go to 4G, ok, when I looked for available networks it found O2 4G, granted BUT!!! when i got to "preferred network type" there is only 3G to pick, and THE MOMENT I PICK IT there is not possible to go back. Every network I find from that moment is only 2G or 3G. Now i reckon that a software problem right? See attachments
It is a software bug and I think I sort it out after flashing the phone. For now I sorted out the problem using Networks app by Philipp Mangalov and switching network to LTE/GSM auto
Well it seems the data part of the UMI SUPER is not so super, is it? I face a similar problem but worse. The 4G band of 800 doesn't work(despite being advertized by UMI as supported) but luckily the band of 2100 works without any issues. The problem comes when I'm out of 2100 band coverage and phone must switch to 3G - then I lose all data connectivity completely. So basically whenever I'm out of 4G 2100 coverage(which is often) I am without any connectivity! Anyone facing the same? Solution?
Indopilot said:
Well it seems the data part of the UMI SUPER is not so super, is it? I face a similar problem but worse. The 4G band of 800 doesn't work(despite being advertized by UMI as supported) but luckily the band of 2100 works without any issues. The problem comes when I'm out of 2100 band coverage and phone must switch to 3G - then I lose all data connectivity completely. So basically whenever I'm out of 4G 2100 coverage(which is often) I am without any connectivity! Anyone facing the same? Solution?
Click to expand...
Click to collapse
I only have 3G and the phone shows that I have internet, but when I try to actually use the data it just says no connection on apps.
zbysogi said:
Hi,
did anyone using Umi Super have any problems with using 4G at 800MHz? Im on giffgaff and even though Umi Super is supposed to work at 4G under 800MHz (thats what the specification states) i cant manage to make it work. I have perfect 4G coverage, 4G sim, 4G tariff, even gave my sim to a friend with S7 edge and it worked on his phone. Maybe new update will fix that? I tried with different sim from different operator (LYCA) and it works but 4G in LYCA is at 2100MHz so I didnt really check the 800. I tried everything and still nothing. Did anyone have similar problem?
Click to expand...
Click to collapse
I don't have this issue at all. My UMi Super connects perfectly to my 4g network under 800MHz without an issue here in Uganda. You can install the MTK Engineering app from the play store and check the band compatibility on ur device and you can also set the mode using the same app under android settings.
You could also try updating to the latest OTA which is 20160810 or the one before it by downloading the files from forum post here and saving them to ur phone and updating manually if you don't have the current OTA
sachak said:
I don't have this issue at all. My UMi Super connects perfectly to my 4g network under 800MHz without an issue here in Uganda. You can install the MTK Engineering app from the play store and check the band compatibility on ur device and you can also set the mode using the same app under android settings.
You could also try updating to the latest OTA which is 20160810 or the one before it by downloading the files from forum post here and saving them to ur phone and updating manually if you don't have the current OTA
Click to expand...
Click to collapse
GravityBox is a perfect solution for this problem. You can set up an icon in notification bar allowing You to toggle between 2G/3G/4G
zbysogi said:
I actually bought 2 phones of the same model so I decided to check if 4G worked on the other one and as I put the sim card in I just remembered something and realized same thing happened with my phone. When I put the SIM card in for the first time it DID automatically go to 4G, ok, when I looked for available networks it found O2 4G, granted BUT!!! when i got to "preferred network type" there is only 3G to pick, and THE MOMENT I PICK IT there is not possible to go back. Every network I find from that moment is only 2G or 3G. Now i reckon that a software problem right? See attachments
Click to expand...
Click to collapse
same problem
This is indeed a software issue, one I have come accross many times - using an app to toggle between the service types is the best workaround!
There are many apps that work to resolve this, some great ones have already been mentioned.
TerryWebbs said:
This is indeed a software issue, one I have come accross many times - using an app to toggle between the service types is the best workaround!
There are many apps that work to resolve this, some great ones have already been mentioned.
Click to expand...
Click to collapse
Could you tell me some app that resolve this?
Thanks
I've got a UMI Super and had this issue as well:
try this app:
Network by Philipp Mangelow
https://play.google.com/store/apps/details?id=de.mangelow.network
4g Umi Super on Giff Gaff
You need Giff Gaff settings in access point name. If you try and use O2 4g it doesn't work even though Giff Gaff uses O2 network. Settings are really easy to input but MUST be Giff Gaff not O2.
zbysogi said:
I actually bought 2 phones of the same model so I decided to check if 4G worked on the other one and as I put the sim card in I just remembered something and realized same thing happened with my phone. When I put the SIM card in for the first time it DID automatically go to 4G, ok, when I looked for available networks it found O2 4G, granted BUT!!! when i got to "preferred network type" there is only 3G to pick, and THE MOMENT I PICK IT there is not possible to go back. Every network I find from that moment is only 2G or 3G. Now i reckon that a software problem right? See attachments
Click to expand...
Click to collapse
There is a fix on rooted phones by using GravityBox and switching between 2G/3G/4G
Thread can be closed.
4G on a Umi Super on GiffGaff.
zbysogi said:
There is a fix on rooted phones by using GravityBox and switching between 2G/3G/4G
Thread can be closed.
Click to expand...
Click to collapse
All that's needed is GiffGaff settings inputing manually. Very easy to do. O2 settings that the phone recognises when a GiffGaff sim is used WILL NOT WORK. The Network is O2 but the APN settings for GiffGaff are totally different.
All you guys that think you know what you're doing obviously don't.
No need to Root or use GravityBox or any other App.
Maz Jones said:
All that's needed is GiffGaff settings inputing manually. Very easy to do. O2 settings that the phone recognises when a GiffGaff sim is used WILL NOT WORK. The Network is O2 but the APN settings for GiffGaff are totally different.
All you guys that think you know what you're doing obviously don't.
No need to Root or use GravityBox or any other App.
Click to expand...
Click to collapse
Well said. I just shake my head in despair when I see how totally clueless people try to be teachers and Internet gurus with very limited knowledge about the task at hand. These comments should come with warning stickers.
For those who want to be able to switch between 3G/4G and LTE only, use this nifty little APK that I've attached below. It will allow you to enter engineer mode without using the dial code.
Hi
This is a bug implemented in Android 7.0.
I had the same.
1 Just force in your parameters 2G/3G networks
2 wait for network authentification (no more excalamtion mark)
3 go back to 4G
Every thing will be OK to next switch off or plane mode.
Rgds,
LTE band 7 (2600) not working
I recently received my new Umi Super and updated to the last firmware V7.01_20170413, everything works fine except for the 4G. I live in an area where band 7 (2600) is available but the phone can't connect to it. Of course, my preferred network type is set to 4G/3G/2G (auto).
I read a lot about the issue on the internet but I can't find a solution.
I checked the BandMode on the phone by dialing *#*#3646633#*#*, band 7 is included and checked. However, when I tried to remove the other LTE bands and keep only band 7, I got a message explaining that the list can't be empty ("Failed. The band is changed from not null to null, it is illegal"), though the list was not completely empty because band 7 was still selected.
Also, I tried to change the radio band by dialing *#*#4636#*#*, but process com.android.phone stopped working when I pressed "select radio band", even after I cleared cache in phone and sim apps.
Can anyone tell me how to fix the problem and get connected to 4G.
BTW, Network by Philipp Mangelow is not available anymore. Switching between 3G/2G and 4G/3G/2G settings doesn't fix the issue. I tried the giffgaff settings, but the APN gets deleted as soon as I try to save it.
Thanks
bemo00 said:
I recently received my new Umi Super and updated to the last firmware V7.01_20170413, everything works fine except for the 4G. I live in an area where band 7 (2600) is available but the phone can't connect to it. Of course, my preferred network type is set to 4G/3G/2G (auto).
I read a lot about the issue on the internet but I can't find a solution.
I checked the BandMode on the phone by dialing *#*#3646633#*#*, band 7 is included and checked. However, when I tried to remove the other LTE bands and keep only band 7, I got a message explaining that the list can't be empty ("Failed. The band is changed from not null to null, it is illegal"), though the list was not completely empty because band 7 was still selected.
Also, I tried to change the radio band by dialing *#*#4636#*#*, but process com.android.phone stopped working when I pressed "select radio band", even after I cleared cache in phone and sim apps.
Can anyone tell me how to fix the problem and get connected to 4G.
BTW, Network by Philipp Mangelow is not available anymore. Switching between 3G/2G and 4G/3G/2G settings doesn't fix the issue. I tried the giffgaff settings, but the APN gets deleted as soon as I try to save it.
Thanks
Click to expand...
Click to collapse
You may try to force 3G and then try to force 4G
You may try to user another IMEI number from a UMI device with 2600 support (of course backup/write down the original one before just in case)
http://www.ucc.co.ug/data/imei/2
After the update to Nougat 7.x how long does it take to do a full recharge?
Do you still have fast charge feature (< 1 hour) or do you lost it like all users reported so far?
What about your GPS? Do you have a fast fix after cleaning history and is it reliable (not losing signal often?).
SimurghXDA said:
You may try to force 3G and then try to force 4G
You may try to user another IMEI number from a UMI device with 2600 support (of course backup/write down the original one before just in case)
http://www.ucc.co.ug/data/imei/2
After the update to Nougat 7.x how long does it take to do a full recharge?
Do you still have fast charge feature (< 1 hour) or do you lost it like all users reported so far?
What about your GPS? Do you have a fast fix after cleaning history and is it reliable (not losing signal often?).
Click to expand...
Click to collapse
Is it safe to change the IMEI number? and where can I find another number for a UMI device?
GPS is working fine, it fixes pretty fast, but I'm not sure about interruption in the signal because I haven't used it enough yet
So the thing is, a month ago my note 4(6.0.1) for some reason stopped working in 3G or 4G.
Things I've done in order to fix it:
- factory reset
- updated to the latest baseband
- changed sim-card to latest possible
- changed carrier
So right now I'm using a different carrier and have 4G and 2G, but when I switch to 3G, for some reason I can't use internet at all.
Is there a possible fix for this issue? Can this be a hardware problem, considering that 4G and 2G are still fully working?
Also, during 3G usage I've checked service mode menu and it says GMM State: Limited Service.
When I use 4G or 2G, it doesn't show this.
What can this possibly mean?
thanks