Database Users

Call for help: Contacts Chinese (pinyin) search and msyh fonts in 6.5 ROM

I am in China, and have upgraded my snap into the 6.5 ROM. I have two questions.
1. But I still could not seek contacts via the 26-key keybords, only 9 keys (T9) could be used. I've tried to install "pinyin seek.cab", but it does not work. Is there any solution?
2. The Chinese font in snap was ugly. I've tried to change fonts on 6.1 ROM, but I could not manage it on the 6.5 ROM. I tried to install the msyh.cab (14 MB), but it does not work. Any solutions?
Thanks.

which rom have you flashed? My one is tmob dash 3g, i flashed 112509, it works well for me. under \setting\tools\keymap config, select the right one for your snap.
in order to display chinese, i tried several times, at last i found one way to solve it. install msyhfull6.0(15M) first, restart, then install msyh(4M) which is extracted from snap asia 6.5rom, restart again.

belluaire said:
which rom have you flashed? My one is tmob dash 3g, i flashed 112509, it works well for me. under \setting\tools\keymap config, select the right one for your snap.
in order to display chinese, i tried several times, at last i found one way to solve it. install msyhfull6.0(15M) first, restart, then install msyh(4M) which is extracted from snap asia 6.5rom, restart again.
Click to expand...
Click to collapse
I flashed this ROM "RUU_Captain_SNAP_CHS_WM65_2.03.723.2_refry", but i could not find the keymap config at "\setting\tools\".
And could you share the "msyh(4M)" for me, thanks.
My Email is [email protected].
thank you!

http://www.hi-pda.com/forum/viewthread.php?tid=513815 Just click the link. 4Mmsyh, official asia rom(6.1?). Sorry, msyh(4M) is extracted from c720w rom, not snap's.
my one is dash 3g and the keymap is totally different with other snaps. so i flashed the "RUU_MAPL_3VOLUTION_WM65_3VO.2.50.112509.rar" cooked by ookba which has included all kinds of keymaps of snap. For me, it's enough to display and input chinese character. I don't care whether the UI is cn or en.
it's said the offical asia rom would go wrong if msyh is tried to be installed. maybe a rumor.
If you needn't chinese UI. I think you will be satisfied with the rom i have mentioned. It works stably and includes lots of useful tools. and also, i have fixed some bugs of titaniuweather.mrsc, if you need it, i can send the fixed file to you.

belluaire said:
http://www.hi-pda.com/forum/viewthread.php?tid=513815 Just click the link. 4Mmsyh, official asia rom(6.1?). Sorry, msyh(4M) is extracted from c720w rom, not snap's.
my one is dash 3g and the keymap is totally different with other snaps. so i flashed the "RUU_MAPL_3VOLUTION_WM65_3VO.2.50.112509.rar" cooked by ookba which has included all kinds of keymaps of snap. For me, it's enough to display and input chinese character. I don't care whether the UI is cn or en.
it's said the offical asia rom would go wrong if msyh is tried to be installed. maybe a rumor.
If you needn't chinese UI. I think you will be satisfied with the rom i have mentioned. It works stably and includes lots of useful tools. and also, i have fixed some bugs of titaniuweather.mrsc, if you need it, i can send the fixed file to you.
Click to expand...
Click to collapse
Thank you.
MSYH font have fixed, with a 14MB font pack and modification in the registry files.
There's no keymap config in my snap, maybe a new ROM should be flashed.
I've tried RUU_MAPL_3VOLUTION_WM65_3VO.2.00.101009 without Chinese display. So I flashed to a Asia ROM. I need further study in Hi-PDA, thank you!

Korean Rom with 576MB ram for Hd2??

Hi, does anyone know if there is a korean rom available for Hd2? I use korean files a lot on my phone and boxes are of no use. If its out there im sorry but ive bin looking and cant find it at all
Thanks

R3AP3R753 said:
Hi, does anyone know if there is a korean rom available for Hd2? I use korean files a lot on my phone and boxes are of no use. If its out there im sorry but ive bin looking and cant find it at all
Thanks
Click to expand...
Click to collapse
You are looking for a Korean ROM or just need to view Hangeul, in which case you just need Korean font on your device.

Rom not font
looking for ROM not hangul font. Preferably with 576MB ram 'upgrade'. am hoping one exists.

If I...
Yeah.. me is looking for this too... I heard that you can install CHS+CHT Rom then you can install language pack (or something similar) to read and write in Korean...
I would live to give it a go, but only if i had spare HD2 to test it on...
lol
But I will let you know if i manage to do it...

I've Done It!!
R3AP3R753 said:
Hi, does anyone know if there is a korean rom available for Hd2? I use korean files a lot on my phone and boxes are of no use. If its out there im sorry but ive bin looking and cant find it at all
Thanks
Click to expand...
Click to collapse
Hey, I've done it, and working fine.. Bit of issue with Keyboard.. but it works. Downloaded ROM from here at xda-developers, and little help from one of the Korean Sites..
Confirmed working..

poits45 said:
Hey, I've done it, and working fine.. Bit of issue with Keyboard.. but it works. Downloaded ROM from here at xda-developers, and little help from one of the Korean Sites..
Confirmed working..
Click to expand...
Click to collapse
That is GREAT.
Now, can you share with rest of us how you did it and how is working? I (and some of us) would be very appreciate it.

poits45 said:
Yeah.. me is looking for this too... I heard that you can install CHS+CHT Rom then you can install language pack (or something similar) to read and write in Korean...
I would live to give it a go, but only if i had spare HD2 to test it on...
lol
But I will let you know if i manage to do it...
Click to expand...
Click to collapse
He has clarified that he is looking for a Korean ROM whilst based on your post, you are looking for the ability to just read and write Korean. If it is the latter, that can be done using the correct font and input (SIP)
However, you will not be able to view Chinese font. I am not sure if there is a way to allow the user to see both Chinese and Korean fonts at the same time

burger said:
He has clarified that he is looking for a Korean ROM whilst based on your post, you are looking for the ability to just read and write Korean. If it is the latter, that can be done using the correct font and input (SIP)
However, you will not be able to view Chinese font. I am not sure if there is a way to allow the user to see both Chinese and Korean fonts at the same time
Click to expand...
Click to collapse
Hey mate, would the fonts and SIP's be available for download from the Microsoft website? And/or from someplace else?
Cheers.

I've ran into these and installed to my Touch pro 2. (it says it's from HTC HD2) http://www.mymits.net/zboard/zboard.php?id=pds&page=2&no=5757
Thanks to James Kim, it work fine as far as texting and e-mailing in Korean. (I've installed it last night and so far so good)
It comes with "Moa keys" and I was able to get some info from youtube. (I'm learning)
I've got T-Mobile and it's working fine, but when I try to send to my friend with AT&T, it gives me message and tells me try to send it without the symbols.
I guess it doesn't work if you have AT&T.

DotheTP2 said:
I've ran into these and installed to my Touch pro 2. (it says it's from HTC HD2) http://www.mymits.net/zboard/zboard.php?id=pds&page=2&no=5757
Thanks to James Kim, it work fine as far as texting and e-mailing in Korean. (I've installed it last night and so far so good)
It comes with "Moa keys" and I was able to get some info from youtube. (I'm learning)
I've got T-Mobile and it's working fine, but when I try to send to my friend with AT&T, it gives me message and tells me try to send it without the symbols.
I guess it doesn't work if you have AT&T.
Click to expand...
Click to collapse
yea I am also using MoaKey2 which I think is from Samsung and is relatively easy to use.
the site you linked requires registration =)
@nayajoeun, can't remember where I got the fonts
edit: added cab file for font

its not easy to install font on wm6.5... i've tried so many fonts... all failed on me

Here is how i did it..
OK.. Here is how I did it.. hopefully this will help you ppl.
I'm currently using Telstra (Australia : 850Mhz / 2100Mhz) version of HTC HD2 (Leo).
I've forgot what Radio Version it was.. but yeah...
* Install HSPL
* Do a search for Merlion Leo Rom V2.5 on this forum
a) Once installed and configured,
* Do a search for Lost In Asia V1.2.23544 WWE with CHS on this forum
a) Once installed and configured, open up a browser then goto google.co.kr then in the search box, type in or copy and paste this "htc hd2 한글쓰기". It's the thrid one down on the search result... one that starts with "mymits"
b) download the files from the website and follow the instruction.
Instead of using Fingerkey, I found Moakey is alot better.
Hope this helps... Reason why I've used 2 custom roms.. ROM installed ok, but got stuck on HTC Screen (May be because I didn't read the information fully... advised to install RADIO Ver of 2.08 before installing the ROM)... So, I had to install Merlion Leo Rom V2.5 then Lost In Asia V1.2.23544 WWE with CHS.
Anyways...
Screenshots attached..
And I'm not responsible if this don't work and brick your phone... like all the cooked roms.
Cheers..

Bravo! Well done.
I would like to try on my HTC Touch Pro 2. Any advise?

Can't see why not
DotheTP2 said:
Bravo! Well done.
I would like to try on my HTC Touch Pro 2. Any advise?
Click to expand...
Click to collapse
Can't see why not you can install the files on that website i mentioned, but not sure about the Custom Roms..
Cheers

poits45 said:
OK.. Here is how I did it.. hopefully this will help you ppl.
I'm currently using Telstra (Australia : 850Mhz / 2100Mhz) version of HTC HD2 (Leo).
I've forgot what Radio Version it was.. but yeah...
* Install HSPL
* Do a search for Merlion Leo Rom V2.5 on this forum
a) Once installed and configured,
* Do a search for Lost In Asia V1.2.23544 WWE with CHS on this forum
a) Once installed and configured, open up a browser then goto google.co.kr then in the search box, type in or copy and paste this "htc hd2 한글쓰기". It's the thrid one down on the search result... one that starts with "mymits"
b) download the files from the website and follow the instruction.
Instead of using Fingerkey, I found Moakey is alot better.
Hope this helps... Reason why I've used 2 custom roms.. ROM installed ok, but got stuck on HTC Screen (May be because I didn't read the information fully... advised to install RADIO Ver of 2.08 before installing the ROM)... So, I had to install Merlion Leo Rom V2.5 then Lost In Asia V1.2.23544 WWE with CHS.
Anyways...
Screenshots attached..
And I'm not responsible if this don't work and brick your phone... like all the cooked roms.
Cheers..
Click to expand...
Click to collapse
LIA ROM does not include radio whilst Merlion ROM does. You should be able to skip Merlion ROM for this exercise by just flashing the correct radio before using LIA.
Thanks for the updated MoaKey. Will give it a go later.

I made a mess trying to upload screenshots.
Skip this post, Sorry.

It's working! but it's 99.9%
I installed steps 1-6 on my HTC Touch Pro 2 and it is working, but whenever I pushed start button at bottom right it freezes my phone.
Until I installed MyMITs_Korea+Moakey2WVGA100310.cab then everything works smooth.
As you can see, some of menu has not changed yet. 99.9% I'll say.
My rom is |R|6.5.5|ROM|WWE| ★ Energy "Leo" 23544 at http://forum.xda-developers.com/showthread.php?t=562773
and it seems to be okay now.
I can't wait til the t-mobile hd2 comes out. (I'll have to butter up my sweetheart to get one probably )

Thank You!
Thank you so much for providing this for us. I just ordered an HD2 today, and I worried whether or not I'd have access to a Korean IME. 한어 문짜를 못 보내면 속상하고 한굴 컴색을 못하면 죽을 것 같아서 정말 고마워요!

keyboard only
your keyboad and fonts cab , is it possible to get the keyboard only, or if you could show the way i would be deeply endebted to yo sir/madam.

[Q] Flashing ROM on Acer neotouch S200

Hello, I bought on the german e-bay a mobile device called Acer neotouch s200, which is in german language without other languages like english, etc... I have read that if I want to get english language, I need to (re)flash it. Currently, the device has S200_3.003c.00_DE ROM. I do not know exactly if it is better to get the default ROM or the newest. To flash it, I downloaded Acer S200 beta 3 flashing tool, ran Acer_EUU.exe, but it stopped before updating the device (this was made on my desktop computer with Windows XP). I also tried it on my laptop with Windows 7, but the Acer_EUU.exe "stopped working". Can you please give me any advice how to solve my problem? I read it is better to get the default ROM, because it reduce the battery status, but it has got bugs.
Thank you

heeelp please

bry4nnn said:
heeelp please
Click to expand...
Click to collapse
heeelp please

Please do some search on this forum. This is one of the thread I found.
Quote:
benjaminchan
10th April 2010, 06:47 AM
Dear Stress Analyst,
Thanks for your helpful advice. The problem has been solved. For the benefit of those who run into the same problem, here is what I did (I am summarizing this from memory, so I may miss a few things):
- I downloaded a file called "Arto's Sense rom 2.1 (3.003c, 23554, 2012).rar". The size is 162,841,490 bytes.
- I unzipped the contents of the .rar file into a folder.
- I put the S200 in bootloader mode by pressing and holding the camera and power buttons, while pressing the reset button with the stylus. The LED started flashing red. I connected the S200 to my Windows XP SP3 desktop, and it caused the Acer HS-USB driver to be installed.
- In the aforementioned folder, I ran “Acer_Euu.exe”, and was led through a series of windows. Just click, click, click ...
- When flashed, the Arto ROM was nice and interesting on my pda, but a bit too funky for a middle-age man like me. So I decided to install the Acer update instead.
- I unzipped file “OS_Acer_3.003c.01.EN.02_WM65_A.zip” and ran file EUU_Acer_S200_3.003c.01_EN_02_03.03.08_3.003c.00_2 0100202.exe
- After flashing the updated Acer ROM, I checked the version number, which was CE OS 5.2.21883 (Build 21883.5.0.783). The earlier version was Build 21857.5.0.66. The new version seems to run faster than the old version. Here is what I think were the problems with the older version 21857.5.0.66:
- The old firmware does not do a Clean Boot very well.
- The old firmwave has problems connecting to the Acer update.
Arto's ROM overcame these two problems, which meant that I can use it as a temporary bridge to the updated Acer ROM.
Unquote..
You can try the newest Arto's rom on the 2nd thread below yours.

Unhappy
How can I change ROM Acer neoTouch S200
I have OS_ACER_3.003b.00.EN_WM65_S200
I want to change to
EUU_Acer_S200_3.003c.00_EN_01_03.03.08_3.003c.00_2 0100203
problem
Code
ERROR CODE = SKU_incompatible

Search.... All answers in this forum............
.....Tried to update from 3.003b to EUU_Acer_S200_3.003c.00_EN_01_03.03.08_3.003c.00_20100203
and the utility tells me SKU_incompatible .
I have in registry EN language by default.
Does anyone knows what is wrong with it?
Yes, for this "3.003c.00_EN_01" rom you should have language set ton EN_01 in your registry. ;-]
.....................
Just use your favorite registry editor and go to HKLM\ControlPanel\ACER\SystemInfo\Software
You'll find two keys: ExtROMVer and Language
For each key, Change your language occurence to "EN_01".

guys, do you really think that I am an idiot? I know all these steps, but I CANNOT connect the device to my laptops & PC
btw, can u copy here a DL link for "Arto's Sense rom 2.1 (3.003c, 23554, 2012).rar" ? Cannot find it

cmooon fellaz

Can you get into bootloader mode?
Version 2.1 is just the latest version during the creation of the thread. You can download other versions here.
http://www.almostunreal.org/arto/
Try follow up on this thread.
http://forum.xda-developers.com/showthread.php?t=642654&page=258

Get machine into bootloader mode, Red led flashing. Key sequence:
Camera + Volume down + Reset
Previous key sequence won't work for me. (Camera+Power+Reset)

Finally I flashed my device using the Arto's Sense rom, but now the device is really slow and some options are restricted. I also cannot change the display settings, so it is sometimes bright and sometimes dark. G-Sensor does not work, phone lags a lil bit. Is there any way how to get the DEFAULT stock firmware (with english language of course)? I copied the downloaded firmware from ftp: ftp.acer-euro (the oldest) to directory called Acer beta flashing tool where is also included Acer_EUU.exe and other stuff for flashing... and flashed it. After flash the welcome screen says I have the old firmware, but there is the same theme like before and the OS version did not change. I thought the newest, cooked firmware is very good & fast and works without any problems but this really sux. imho the default will be definitely the best :>
Thanks for any advice

Download this official rom here.
http://www.sendspace.com/file/6t1kpo
Check the Arto rom version and change your register to EN_02 before flashing the new rom.
...................
Just use your favorite registry editor and go to HKLM\ControlPanel\ACER\SystemInfo\Software
You'll find two keys: ExtROMVer and Language
For each key, Change your language occurence to "EN_02".
..................
Actually I have tested every step without problem. Flash to Arto's rom and flashing back to official rom.

bry4nnn said:
Finally I flashed my device using the Arto's Sense rom, but now the device is really slow and some options are restricted. I also cannot change the display settings, so it is sometimes bright and sometimes dark. G-Sensor does not work, phone lags a lil bit. Is there any way how to get the DEFAULT stock firmware (with english language of course)? I copied the downloaded firmware from ftp: ftp.acer-euro (the oldest) to directory called Acer beta flashing tool where is also included Acer_EUU.exe and other stuff for flashing... and flashed it. After flash the welcome screen says I have the old firmware, but there is the same theme like before and the OS version did not change. I thought the newest, cooked firmware is very good & fast and works without any problems but this really sux. imho the default will be definitely the best :>
bry4nnn,
First of all, you have followed bad/wrong advice from an idiot who quoted an old post about arto's sense "2.1" when in reality, sense roms and s200 rom developement in general has far surpassed 2.1 and acer stock firmware!!!!
according to your first post you already had the latest "stock" firmware w/3.003c drivers so all you needed to do was flash one of the many "clean roms" labled "WWE".
Second, the S200 will always have bugs because of WM6.5 that's why cooked roms are made to overcome most of the limitations of our device!! Inchu though
wrong about almost everything was right about one thing,"READ BEFORE YOU START A NEW THREAD" because right beneath your post is an entire universe of
info,roms,flashing info and all things s200!!! including one labled "Arto's sense 4.0" if you bothered to look you would find a change log with a chronological listing of Arto's sense from 1.0,1.1,etc...
My advice for you would be to delete all of your downloaded EUU's and beta tools and start over by simply downloading one of brainmaster's roms either
"WWE Clean" or "WWE Manila Clean 1.1" or any of the many he has cooked
for our device.
Click to expand...
Click to collapse

lnchu said:
Download this official rom here.
http://www.sendspace.com/file/6t1kpo
Check the Arto rom version and change your register to EN_02 before flashing the new rom.
...................
Just use your favorite registry editor and go to HKLM\ControlPanel\ACER\SystemInfo\Software
You'll find two keys: ExtROMVer and Language
For each key, Change your language occurence to "EN_02".
..................
Actually I have tested every step without problem. Flash to Arto's rom and flashing back to official rom.
Click to expand...
Click to collapse
ehm, your file is called "Name: OS_Acer_3.003c.01.EN.02_WM65_A.zip " which refers to a newer firmware, right? Anyway, i have to repeat myself: "I need default stock firmware, the oldest with EN" (and in my opinion it is probably called 2.003, yy?)

acer900 said:
bry4nnn said:
....
bry4nnn,
First of all, you have followed bad/wrong advice from an idiot who quoted an old post about arto's sense "2.1" when in reality, sense roms and s200 rom developement in general has far surpassed 2.1 and acer stock firmware!!!!
according to your first post you already had the latest "stock" firmware w/3.003c drivers so all you needed to do was flash one of the many "clean roms" labled "WWE".
Second, the S200 will always have bugs because of WM6.5 that's why cooked roms are made to overcome most of the limitations of our device!! Inchu though
wrong about almost everything was right about one thing,"READ BEFORE YOU START A NEW THREAD" because right beneath your post is an entire universe of
info,roms,flashing info and all things s200!!! including one labled "Arto's sense 4.0" if you bothered to look you would find a change log with a chronological listing of Arto's sense from 1.0,1.1,etc...
My advice for you would be to delete all of your downloaded EUU's and beta tools and start over by simply downloading one of brainmaster's roms either
"WWE Clean" or "WWE Manila Clean 1.1" or any of the many he has cooked
for our device.
Click to expand...
Click to collapse
For what exactly do I need this: WWE Clean and WWE MC 1.1 ? How I said, I rly do not need any CUSTOM firmware. just want to get the default firmware, not these bugged versions.
Click to expand...
Click to collapse

Then you are clearly in the wrong place because this is the "Neotouch S200 Rom Development" section not Acer.com (http://www.acer.com/worldwide/support/download.htm which is where all things "official" or"stock" can be found!!!
And you are so wrong about the custom roms here they are light years ahead of the bug filled original acer rom!!!
But since you have only tried an older version custom rom still in development (as the change log indicates) and decided that all custom roms are buggy w/out having tried them then maybe you deserve the original acer firmware!
custom roms are made to correct problems in the stock firmware.
*** WILL THE MODERATOR PLEASE CLOSE THIS USELESS ERROR FILLED THREAD***

acer900 said:
Then you are clearly in the wrong place because this is the "Neotouch S200 Rom Development" section not Acer.com (http://www.acer.com/worldwide/support/download.htm which is where all things "official" or"stock" can be found!!!
And you are so wrong about the custom roms here they are light years ahead of the bug filled original acer rom!!!
But since you have only tried an older version custom rom still in development (as the change log indicates) and decided that all custom roms are buggy w/out having tried them then maybe you deserve the original acer firmware!
custom roms are made to correct problems in the stock firmware.
*** WILL THE MODERATOR PLEASE CLOSE THIS USELESS ERROR FILLED THREAD***
Click to expand...
Click to collapse
u r so amusing, are not u? "custom roms are made to correct problems in the stock firmware" - yeah yeah and the bugs there are like side effects at painkillers, yeah?
And why the **** are u spamming here in this thread (now)? I wanted to get stock FW, not an advice about slow_buggy_custom_rom, cyao

I belong here, been here almost from the start of this forum and know a hell of a
lot more than you!!!! but dumb assholes like you who come to a windows mobile hacking forum to ask for advice about stock firmware don't!!
Not to mention, insulting the work of the very people you ask to help you're
sorry - wannabe - know-it-all ass will surely never get answers!!!!!

Any ideas how to get the default stock fw like it is here - http://tinyurl.com/5s5ocmh ?
I had it before with unsuitable languange (fw version was 3.003c). Now I want the same, just with english. If I use the fimwares from acer webpage then I have the same theme (& and the display is still dark, cannot change some options, etc..)

PROBLEM SOLVED
Arto made for me this stock firmware (3.003c.01.EN.02)
http://www.4shared.com/file/jJQSar1f/Stock_rom_english_S200.html
The home screen looks like this:
http://tinyurl.com/6fyfkhv
Thank you

Mi7Roms Nokia Edition

Hi guys,
I'm new xda forum member...
So I'm very sorry if this is a stupid question but I'd like to flash my omnia7 unbranded using one of the latest Mi7Roms cooked with TANGO.
In different posts I see that there are several release of these roms.
In this post http://forum.xda-developers.com/showthread.php?t=1782388 mirolg released 3 roms called NOKIA Edition.
I thin that I have to decide between:
- mi7ROM_v2.1 NOKIA edition OS8773_ root manager.zip
- mi7ROM_v2.1 NOKIA edition OS8773_Basis Skin_root manager.zip
But I'd like to know what Nokia Edition means? My device after flashing will appear as a nokia device automatically or is there something to do after flashing rom?
Samsung marketplace will be available or not?
Are there other roms that I can use to get my omnia7 fully unlocked?
I also see in the previous mentioned post that to install some Nokia Apps or some themes on the device we must use the cab sender method instead of standard XAP.
Is it right?
What is the difference between cab sender and xap?
Best Regards

Mousexx74 said:
Hi guys,
I'm new xda forum member...
So I'm very sorry if this is a stupid question but I'd like to flash my omnia7 unbranded using one of the latest Mi7Roms cooked with TANGO.
In different posts I see that there are several release of these roms.
In this post http://forum.xda-developers.com/showthread.php?t=1782388 mirolg released 3 roms called NOKIA Edition.
I thin that I have to decide between:
- mi7ROM_v2.1 NOKIA edition OS8773_ root manager.zip
- mi7ROM_v2.1 NOKIA edition OS8773_Basis Skin_root manager.zip
But I'd like to know what Nokia Edition means? My device after flashing will appear as a nokia device automatically or is there something to do after flashing rom?
Samsung marketplace will be available or not?
Are there other roms that I can use to get my omnia7 fully unlocked?
I also see in the previous mentioned post that to install some Nokia Apps or some themes on the device we must use the cab sender method instead of standard XAP.
Is it right?
What is the difference between cab sender and xap?
Best Regards
Click to expand...
Click to collapse
Nokia Edition means that you can flowlessly install the nokia apps from the marketplace nokia section, before mirolg released this the apps had to be cracked and sideloaded to run on non-nokia phones. After flashing your phone will automaticly "think" it's a nokia lumia 800. For accessing Samsung marketplace you simply have to change the marketplace using some app like MarketplaceConfig or wphTweaks or anything similar, one of them is already installed after flashing.
Some Nokia apps use editional code libraries that are not included in Samsungs windoes phone releases, so you can install them with a cab file. A cab file is actually an update file, just like the ones that zune installs to your phone when you get an official update. A XAP file is a normal application file that can be installed AND uninstalled, while after installing a cab-file the only possibility to remove it again is restoring a backup or flashing a new ROM.
The decision between the two ROMs is simply a question of looks, one comes in standard metro/windows 8 style look, the other one has some changed icons.
I hope I did answer your questions,
fadenfisch

fadenfisch95 said:
Nokia Edition means that you can flowlessly install the nokia apps from the marketplace nokia section, before mirolg released this the apps had to be cracked and sideloaded to run on non-nokia phones. After flashing your phone will automaticly "think" it's a nokia lumia 800. For accessing Samsung marketplace you simply have to change the marketplace using some app like MarketplaceConfig or wphTweaks or anything similar, one of them is already installed after flashing.
Some Nokia apps use editional code libraries that are not included in Samsungs windoes phone releases, so you can install them with a cab file. A cab file is actually an update file, just like the ones that zune installs to your phone when you get an official update. A XAP file is a normal application file that can be installed AND uninstalled, while after installing a cab-file the only possibility to remove it again is restoring a backup or flashing a new ROM.
The decision between the two ROMs is simply a question of looks, one comes in standard metro/windows 8 style look, the other one has some changed icons.
I hope I did answer your questions,
fadenfisch
Click to expand...
Click to collapse
Great answer..
thank you so much...
I will flash my Omnia as soon as possible because chewron labs token are expired. :fingers-crossed:
Another question if you know the answer...
After flashing my omnia with custom rom, does syncronization with zune still works or no (file sync and multimedia content)?
Obviously updates will not work.
Best Regards

Mousexx74 said:
Great answer..
thank you so much...
I will flash my Omnia as soon as possible because chewron labs token are expired. :fingers-crossed:
Another question if you know the answer...
After flashing my omnia with custom rom, does syncronization with zune still works or no (file sync and multimedia content)?
Obviously updates will not work.
Best Regards
Click to expand...
Click to collapse
yep, it works.

Tigress said:
yep, it works.
Click to expand...
Click to collapse
works for me also, thank you XDA!

Attentive Phone
Hi, Mirolg Is it possible to add HTC Attentive Phone app into one of the next ROMs?

Samsung ATIV S I8750 Rom flashing!

hi all.
link 4 Tools and driver
http://www67.zippyshare.com/v/65155760/file.html
here are some EUROPEAN GDR2 ROMS (data sense is include):
(only flash if your csc code is available)
http://hotfile.com/dl/233814859/a432057/I8750XXBME1_OXABME1_R_Signed_WP8.rar.html
(thx to spalvin, here are a Gdr2 Rom with More csc codes!)(dont use costum csc in this download Folder if you not know for what it is!))
https://disk.yandex.ru/public/?hash...UI5Sv3ogkMx+ycwSplwl+DA=:/Прошивка/&locale=ru
it Looks like this Rom is for the Italien market (not sure) but you can choose by the flashtool Default csc DBT, ATO,BTU,ITV,XEF,XEO
step by step instruction:
1. Download Flashtool+Driver and ROM with CSC file.
2. Install Driver on your PC (i had problems with win 8.1 X64, win7 X64 installation fine)
3. Put your phone in Download modus
Shut down your phone
press and hold volume up + camera button and press shortly power button (still hold volume up and camera buttons!)
download modus must appear.
4. Start flashtool and load Rom (.WP8 file) and csc file into the flashtool
in the yellow folder load Rom. (.WP8 file)
in the green folder load CSC file
5. Choose your default CSC Code under DL Options-->CSC sale Codes. (for example DBT is Germany)
6. Plug in your phone to your PC over USB cabel.
7. Press start in the flashtool (if you cant press start, something wrong with drivers or phone--PC connection)
Flashtime about 10 min....
I am NOT responsible for any damage to your device!
You do everything on your own risk!

Interesting... I wonder what GoodDayToDie thinks about this

I took a quick look but haven't investigated yet. Unfortunately, I have the other model of ATIV S - the T899M - and there's no way I'm going to risk flashing an I8750 ROM onto it; that never ends well. On the other hand, I *would* be very interested in Samsung WP8 flashing tools. One of the biggest problems my phone has is that its firmware is badly outdated and there seems to be no updates for it (the I8750 has had at least two updates so far, one of which fixed a known issue that also affects my phone and breaks WiFi tethering).
Obviously, the interest in custom ROMs is also quite significant. We'll have to wait and see about that, though.

GoodDayToDie said:
Obviously, the interest in custom ROMs is also quite significant. We'll have to wait and see about that, though.
Click to expand...
Click to collapse
I think that the ativ's bootloader is locked. Huawei coders could miss checking a signature, but not samsung, I think. But who knows?

Oh, it's undoubtedly locked. All WP8 devices are supposed to have locked bootloaders. However, that doesn't mean we can't find bugs in those systems to let us past the signature checks, or to let us replace the bootloader entirely, anyhow. This was possible (via various approaches) on devices from multiple different OEMs (including Samsung) with WP7.

I got the ROM if anyone need it.

please
djtonka said:
I got the ROM if anyone need it.
Click to expand...
Click to collapse
can you please send me the link to download this rom
i have a samsung ativ s and want to flash it
many thanks in advance
mega!

megasounds said:
can you please send me the link to download this rom
i have a samsung ativ s and want to flash it
many thanks in advance
mega!
Click to expand...
Click to collapse
I am at work now so will upload on free server later

djtonka said:
I got the ROM if anyone need it.
Click to expand...
Click to collapse
yeah please post a link. i will edit it in the first post i already have found GDR2 roms and post links.

Flash Tool and ROM Download Links can be found here: http://www.pocketpc.ch/samsung-ativ...8-8-0-10327-77-fuer-ativ-s-2.html#post1790079
Seems people have already tried it out and it works fine on their I8750s. Haven't tried it myself yet as I'm still downloading the ROM.

tooly26 said:
hi all.
link 4 Tools and driver
http://www67.zippyshare.com/v/65155760/file.html
here are some GDR2 ROMS (data sense is include):
http://hotfile.com/dl/233814859/a432057/I8750XXBME1_OXABME1_R_Signed_WP8.rar.html
http://www.moulnisky.com/index.php?dir=Samsung/Firmwares/GT-I8750/
it Looks like this Rom is for the Italien market (not sure) but you can choose by the flashtool Default csc DBT, ATO,BTU,ITV,XEF,XEO
i will make a step by step instruction later if i will get time!
I am NOT responsible for any damage to your device!
You do everything on your own risk!
Click to expand...
Click to collapse
Thanks you very much, waiting for the manual :good:

I'd like to flash, but I want some feedbacks from this forum before...

I got GT-I8750_XXAMB1_R_signed.wp8 so is worth posting?

djadry said:
I'd like to flash, but I want some feedbacks from this forum before...
Click to expand...
Click to collapse
Well, I just install it. My phone is German, so I have chosen DBT csc. Working fine. Thanks to all!!

Rotry83 said:
Well, I just install it. My phone is German, so I have chosen DBT csc. Working fine. Thanks to all!!
Click to expand...
Click to collapse
Do you have all languages on it?

djtonka said:
Do you have all languages on it?
Click to expand...
Click to collapse
Yes, has all languages ​​and is free. I'm Spanish, for example :good:

Please write down current OS and firmaware version and what exacly link you used?

djtonka said:
Please write down current OS and firmaware version and what exacly link you used?
Click to expand...
Click to collapse
Rom: GT-I8750XXBME1
I use this link: http://www.moulnisky.com/index.php?dir=Samsung/Firmwares/GT-I8750/ITV/
Version S.O: 8.0.10327.77
The rom XBME1 is free and is Italian but CSC allows many countries.
Sorry for my English

And you have radio FM, DataSence, etc?

djtonka said:
And you have radio FM, DataSence, etc?
Click to expand...
Click to collapse
The radio is not included. Data sense, etc is installed. Ativ Beam works fine