[Q] Flashing ROM on Acer neotouch S200 - neoTouch S200 General

Hello, I bought on the german e-bay a mobile device called Acer neotouch s200, which is in german language without other languages like english, etc... I have read that if I want to get english language, I need to (re)flash it. Currently, the device has S200_3.003c.00_DE ROM. I do not know exactly if it is better to get the default ROM or the newest. To flash it, I downloaded Acer S200 beta 3 flashing tool, ran Acer_EUU.exe, but it stopped before updating the device (this was made on my desktop computer with Windows XP). I also tried it on my laptop with Windows 7, but the Acer_EUU.exe "stopped working". Can you please give me any advice how to solve my problem? I read it is better to get the default ROM, because it reduce the battery status, but it has got bugs.
Thank you

heeelp please

bry4nnn said:
heeelp please
Click to expand...
Click to collapse
heeelp please

Please do some search on this forum. This is one of the thread I found.
Quote:
benjaminchan
10th April 2010, 06:47 AM
Dear Stress Analyst,
Thanks for your helpful advice. The problem has been solved. For the benefit of those who run into the same problem, here is what I did (I am summarizing this from memory, so I may miss a few things):
- I downloaded a file called "Arto's Sense rom 2.1 (3.003c, 23554, 2012).rar". The size is 162,841,490 bytes.
- I unzipped the contents of the .rar file into a folder.
- I put the S200 in bootloader mode by pressing and holding the camera and power buttons, while pressing the reset button with the stylus. The LED started flashing red. I connected the S200 to my Windows XP SP3 desktop, and it caused the Acer HS-USB driver to be installed.
- In the aforementioned folder, I ran “Acer_Euu.exe”, and was led through a series of windows. Just click, click, click ...
- When flashed, the Arto ROM was nice and interesting on my pda, but a bit too funky for a middle-age man like me. So I decided to install the Acer update instead.
- I unzipped file “OS_Acer_3.003c.01.EN.02_WM65_A.zip” and ran file EUU_Acer_S200_3.003c.01_EN_02_03.03.08_3.003c.00_2 0100202.exe
- After flashing the updated Acer ROM, I checked the version number, which was CE OS 5.2.21883 (Build 21883.5.0.783). The earlier version was Build 21857.5.0.66. The new version seems to run faster than the old version. Here is what I think were the problems with the older version 21857.5.0.66:
- The old firmware does not do a Clean Boot very well.
- The old firmwave has problems connecting to the Acer update.
Arto's ROM overcame these two problems, which meant that I can use it as a temporary bridge to the updated Acer ROM.
Unquote..
You can try the newest Arto's rom on the 2nd thread below yours.

Unhappy
How can I change ROM Acer neoTouch S200
I have OS_ACER_3.003b.00.EN_WM65_S200
I want to change to
EUU_Acer_S200_3.003c.00_EN_01_03.03.08_3.003c.00_2 0100203
problem
Code
ERROR CODE = SKU_incompatible

Search.... All answers in this forum............
.....Tried to update from 3.003b to EUU_Acer_S200_3.003c.00_EN_01_03.03.08_3.003c.00_20100203
and the utility tells me SKU_incompatible .
I have in registry EN language by default.
Does anyone knows what is wrong with it?
Yes, for this "3.003c.00_EN_01" rom you should have language set ton EN_01 in your registry. ;-]
.....................
Just use your favorite registry editor and go to HKLM\ControlPanel\ACER\SystemInfo\Software
You'll find two keys: ExtROMVer and Language
For each key, Change your language occurence to "EN_01".

guys, do you really think that I am an idiot? I know all these steps, but I CANNOT connect the device to my laptops & PC
btw, can u copy here a DL link for "Arto's Sense rom 2.1 (3.003c, 23554, 2012).rar" ? Cannot find it

cmooon fellaz

Can you get into bootloader mode?
Version 2.1 is just the latest version during the creation of the thread. You can download other versions here.
http://www.almostunreal.org/arto/
Try follow up on this thread.
http://forum.xda-developers.com/showthread.php?t=642654&page=258

Get machine into bootloader mode, Red led flashing. Key sequence:
Camera + Volume down + Reset
Previous key sequence won't work for me. (Camera+Power+Reset)

Finally I flashed my device using the Arto's Sense rom, but now the device is really slow and some options are restricted. I also cannot change the display settings, so it is sometimes bright and sometimes dark. G-Sensor does not work, phone lags a lil bit. Is there any way how to get the DEFAULT stock firmware (with english language of course)? I copied the downloaded firmware from ftp: ftp.acer-euro (the oldest) to directory called Acer beta flashing tool where is also included Acer_EUU.exe and other stuff for flashing... and flashed it. After flash the welcome screen says I have the old firmware, but there is the same theme like before and the OS version did not change. I thought the newest, cooked firmware is very good & fast and works without any problems but this really sux. imho the default will be definitely the best :>
Thanks for any advice

Download this official rom here.
http://www.sendspace.com/file/6t1kpo
Check the Arto rom version and change your register to EN_02 before flashing the new rom.
...................
Just use your favorite registry editor and go to HKLM\ControlPanel\ACER\SystemInfo\Software
You'll find two keys: ExtROMVer and Language
For each key, Change your language occurence to "EN_02".
..................
Actually I have tested every step without problem. Flash to Arto's rom and flashing back to official rom.

bry4nnn said:
Finally I flashed my device using the Arto's Sense rom, but now the device is really slow and some options are restricted. I also cannot change the display settings, so it is sometimes bright and sometimes dark. G-Sensor does not work, phone lags a lil bit. Is there any way how to get the DEFAULT stock firmware (with english language of course)? I copied the downloaded firmware from ftp: ftp.acer-euro (the oldest) to directory called Acer beta flashing tool where is also included Acer_EUU.exe and other stuff for flashing... and flashed it. After flash the welcome screen says I have the old firmware, but there is the same theme like before and the OS version did not change. I thought the newest, cooked firmware is very good & fast and works without any problems but this really sux. imho the default will be definitely the best :>
bry4nnn,
First of all, you have followed bad/wrong advice from an idiot who quoted an old post about arto's sense "2.1" when in reality, sense roms and s200 rom developement in general has far surpassed 2.1 and acer stock firmware!!!!
according to your first post you already had the latest "stock" firmware w/3.003c drivers so all you needed to do was flash one of the many "clean roms" labled "WWE".
Second, the S200 will always have bugs because of WM6.5 that's why cooked roms are made to overcome most of the limitations of our device!! Inchu though
wrong about almost everything was right about one thing,"READ BEFORE YOU START A NEW THREAD" because right beneath your post is an entire universe of
info,roms,flashing info and all things s200!!! including one labled "Arto's sense 4.0" if you bothered to look you would find a change log with a chronological listing of Arto's sense from 1.0,1.1,etc...
My advice for you would be to delete all of your downloaded EUU's and beta tools and start over by simply downloading one of brainmaster's roms either
"WWE Clean" or "WWE Manila Clean 1.1" or any of the many he has cooked
for our device.
Click to expand...
Click to collapse

lnchu said:
Download this official rom here.
http://www.sendspace.com/file/6t1kpo
Check the Arto rom version and change your register to EN_02 before flashing the new rom.
...................
Just use your favorite registry editor and go to HKLM\ControlPanel\ACER\SystemInfo\Software
You'll find two keys: ExtROMVer and Language
For each key, Change your language occurence to "EN_02".
..................
Actually I have tested every step without problem. Flash to Arto's rom and flashing back to official rom.
Click to expand...
Click to collapse
ehm, your file is called "Name: OS_Acer_3.003c.01.EN.02_WM65_A.zip " which refers to a newer firmware, right? Anyway, i have to repeat myself: "I need default stock firmware, the oldest with EN" (and in my opinion it is probably called 2.003, yy?)

acer900 said:
bry4nnn said:
....
bry4nnn,
First of all, you have followed bad/wrong advice from an idiot who quoted an old post about arto's sense "2.1" when in reality, sense roms and s200 rom developement in general has far surpassed 2.1 and acer stock firmware!!!!
according to your first post you already had the latest "stock" firmware w/3.003c drivers so all you needed to do was flash one of the many "clean roms" labled "WWE".
Second, the S200 will always have bugs because of WM6.5 that's why cooked roms are made to overcome most of the limitations of our device!! Inchu though
wrong about almost everything was right about one thing,"READ BEFORE YOU START A NEW THREAD" because right beneath your post is an entire universe of
info,roms,flashing info and all things s200!!! including one labled "Arto's sense 4.0" if you bothered to look you would find a change log with a chronological listing of Arto's sense from 1.0,1.1,etc...
My advice for you would be to delete all of your downloaded EUU's and beta tools and start over by simply downloading one of brainmaster's roms either
"WWE Clean" or "WWE Manila Clean 1.1" or any of the many he has cooked
for our device.
Click to expand...
Click to collapse
For what exactly do I need this: WWE Clean and WWE MC 1.1 ? How I said, I rly do not need any CUSTOM firmware. just want to get the default firmware, not these bugged versions.
Click to expand...
Click to collapse

Then you are clearly in the wrong place because this is the "Neotouch S200 Rom Development" section not Acer.com (http://www.acer.com/worldwide/support/download.htm which is where all things "official" or"stock" can be found!!!
And you are so wrong about the custom roms here they are light years ahead of the bug filled original acer rom!!!
But since you have only tried an older version custom rom still in development (as the change log indicates) and decided that all custom roms are buggy w/out having tried them then maybe you deserve the original acer firmware!
custom roms are made to correct problems in the stock firmware.
*** WILL THE MODERATOR PLEASE CLOSE THIS USELESS ERROR FILLED THREAD***

acer900 said:
Then you are clearly in the wrong place because this is the "Neotouch S200 Rom Development" section not Acer.com (http://www.acer.com/worldwide/support/download.htm which is where all things "official" or"stock" can be found!!!
And you are so wrong about the custom roms here they are light years ahead of the bug filled original acer rom!!!
But since you have only tried an older version custom rom still in development (as the change log indicates) and decided that all custom roms are buggy w/out having tried them then maybe you deserve the original acer firmware!
custom roms are made to correct problems in the stock firmware.
*** WILL THE MODERATOR PLEASE CLOSE THIS USELESS ERROR FILLED THREAD***
Click to expand...
Click to collapse
u r so amusing, are not u? "custom roms are made to correct problems in the stock firmware" - yeah yeah and the bugs there are like side effects at painkillers, yeah?
And why the **** are u spamming here in this thread (now)? I wanted to get stock FW, not an advice about slow_buggy_custom_rom, cyao

I belong here, been here almost from the start of this forum and know a hell of a
lot more than you!!!! but dumb assholes like you who come to a windows mobile hacking forum to ask for advice about stock firmware don't!!
Not to mention, insulting the work of the very people you ask to help you're
sorry - wannabe - know-it-all ass will surely never get answers!!!!!

Any ideas how to get the default stock fw like it is here - http://tinyurl.com/5s5ocmh ?
I had it before with unsuitable languange (fw version was 3.003c). Now I want the same, just with english. If I use the fimwares from acer webpage then I have the same theme (& and the display is still dark, cannot change some options, etc..)

PROBLEM SOLVED
Arto made for me this stock firmware (3.003c.01.EN.02)
http://www.4shared.com/file/jJQSar1f/Stock_rom_english_S200.html
The home screen looks like this:
http://tinyurl.com/6fyfkhv
Thank you

Related

Newbs: cooked rom or cab install? And go back?

Hi all.
I've bought an herald (P4350 in Italy) for my wife. I've registered the product to htc club and i've installed windows mobile 6 in italian.
Now i've read some thread as:
Newbs guide to Herald modification *updated* 10/18/07: http://forum.xda-developers.com/showthread.php?t=327046
and:
All you need on your Wing: http://forum.xda-developers.com/showthread.php?t=326655
If i've understood well, the first option means overwrite the OS i've just installed with another one with (impressive) features (as touchflo, cube interface, kayser like apps) preinstalled.
The second means collect some apps and install it (maybe it's possible htc home, even touchflo but certainly not cube's interface).
Well, due to limitation of the second way (cube's interface for example), i'd like to try the modified rom (cooked?), but i've some questions:
1) First of all, is it true that i can have all the functionality of the "Touch-IT,WWE v1.1" or similar cooked rom only by flashing the rom or i can found ALL the functionality by installing some apps?
2a) If 1) is false where can i found ALL the apps for doing the same things as well as in a cooked rom?
2b) If 1) is true, can i flash with Touch-IT rom my italian device with italian WM6 installed?
2bI) If 2b) is true, after trying Touch-IT rom can i reinstall my WM6 italian rom by double-clicking on the file downloaded from htc club? If not is a way to rollback to the original rom?
2bII) If 2b) is false (but also if it's true because i prefer the OS in my language ), PLEASE Itje make a Touch-IT,IT where the second IT meas ITALY
1. While you can have the apps, touch-it is built on a newer, more streamlined version of windows mobile 6.
2a. see 2b
2b. You can flash the WWE. I believe there was some effort to get a native language port, ask itje about that.
2bI. Yes. I believe the HTC club one is an RUU, a "Rom Update Utility". If you mess up in the flashing, you can use it restore from bootloader also
2bII. Again, ask itje.
wow that was confusing. Outlines are like hell on a apple.
fzzyrn thanks a lot for answers.
1. So u think that i can have also cube interface by installing an apps? Wich one?
2b. how can i contact itje for a native language port?
Again, thanks a lot for helping me.
i believe there are like flash-based emulations of the cube. Look in the main software development forum.
To contact Itje, private message him. Click on his name and then it should be obvious to extent

Cant install hotfixes on my hd:(

I get message plz use the right correct file or something =/
bumpgggdgfd
What rom version do you have? Which hotfixes are you trying to install? some of the hotfixes aren't needed with the latest stock rom.
noone of the hotfxes are working, and have the latest from the website.
is t a way to download a better rom verson also?
Well, with rom version 1.14 I've installed all hotfixes. Now, with 1.56 (the latest official) I didn't install any hotfix!
Do you have any issues which could be solved by one of the hotfixes?
dunno realy, and how do i change back themes, i installed a theme, but cant change back :S
change: settings-today?
full uninstall: settings-system-remove programs?
wch rom is best?
Well, don't get me wrong, but try to use the search feature! There are a lot of rules on how to post in forums! Now think about someone searching for answers regarding the installation of hotfixes and one of the hits will be this thread where the discussion changes to uninstalling themes and which rom is best!
Btw, what is 'best'? (rhetorical question!)

[REQ] Samsung B7620 Win 6.5.3 Clean

I will repost my original post on modaco here too, if someone can make a clean rom with maybe some fix that are listed below it would be great
Hello,
I just have brought this pda yesterday. It's very pretty and nice hw too. I've tried already to disable all the samsung stuff's but i can't remove sms manager and others things.. (i've already read the guide of editing registry ecc.ecc.).
Isn't around a clean rom to flash it? Can I flash with a generic b7610 rom or it will not work?
The firmware versions of mine are :
PDA : B7620XXII7
CSC : B7620ITVII7
TELEF. : B7620XXII6
I've found here a rom but too scared to try without a changelog and support (h--p://chomikuj.pl/misiio61/Firmware+Samsung/Firmware/GT-B7620+Armani)
If anyone can help it will be really appreciate coz the ppc is good but full of junkies.
thx
bye smile.gif
WISHLIST :
To do
- Clean 6.5.X Rom without Armani things (Pleaseee someeeeoneee heelpppp ussss or a brave man who would flash with b7610 rom)
- Total way to eradicate or at least disable Armani Apps
- A way to keep settings after a softreset or just power off\on :
- camera app lose options like wdr,antimotion ecc.
- device lose cpu settings like auto\high\low use
- softkeyboard will return to samsung default (i'd like to use "FingerKeyB" for example)
- Software to enable the frontcamera? (it seem to be one afterall)
- Way to remove "Sent Message Notification" (tried with all software but do not work, neither from registry, must be armaniapps...)
Done
- GPS Fix (as in tomtom) with "GpsMod"
- Shuttersound Off (just use the cab in the b7610 tweaks guide)
*FIXED (a bit= not all keys are usable sad.gif ) (use AEBPlus.v.2.6.6.2) - Something to remapp all hardware buttons (i think someone mentioned a software somewhere...)
*FIXED (a bit=works but no configuration working to calibrate it well) using this : h**p://rapidshare.com/files/312689104/HTCSensorSDK.dll (some games works now) - Working HTC gmotion driver\dll (tried from omniaPro\II no worked sad.gif )
Click to expand...
Click to collapse
Dump your rom
Ninja_Gundam said:
I will repost my original post on modaco here too, if someone can make a clean rom with maybe some fix that are listed below it would be great
Click to expand...
Click to collapse
Did you have WM6.1 or WM6.5??
On B7610 the WM6.1 is faster, more stable and don't have the collors displaing bug (http://www.modaco.com/content/forum/300931/). I would sugest that you keep with WM6.1..
Could you dump your rom here??
I would like to try this rom on my b7610.
Please follow these topic: http://www.modaco.com/content/b7610...-com/297139/a-simple-procedure-to-dump-a-rom/
Tx =)
Hello
Hmm i have 6.5 already, it came with it and i just tried with a new official rom (always 6.5 but newer).. and yes i have that bug of colors
Btw no need to dump, if u want to try it, the roms files are there : h**p://chomikuj.pl/misiio61/Firmware+Samsung/Firmware/GT-B7620+Armani
or here thx to stn : h**p://www.megaupload.com/?f=Q5T5AXNU
Can't really anyone do a cleanup of the rom?
Chooo
B7620 Armani WM 6.53 (official)
is there any word about an update for WM 6.53 since the now installed 6.52 is buggy and kinda slow....samsung has a very lazy support
Still no
I think we have 2 option, or a custom rom of the 6.5.2 or a 6.1 rom. After all 6.5 isnt that great thing, ok more usable with touch but i can live without it. Plus wm6,1 have 2000 themes, this titanium is cool idea but no themes and the generator online is just a joke
Somebdoy help ussssssssssssssssssssssssss! ^_______^
Damn.. i dont want to change device, but.. support on b7620 really sucks! If only hd2 had a hardware keyboard :\
Chooo
I would love to have a clean Rom, too! My B7620 works fine, but after a Soft Reset I have only about 45 MB RAM free...
Hi [email protected] and others,
on my original post on moda.. a guy offers his skills to mod a rom but he need a dump (h**p://www.modaco.com/content-page/298479/req-help-with-gt-b7620-aka-giorgio-armani/page/20/)of the B7620, can someone here do that?
Chooo
ps : We need to merge forces
Flash B7610 rom onto b7620
is it possible to flash samsung B7610 rom onto B7620? and if so which of the roms work properly.
Flashing B7620
Don't flash B7610 rom to B7620...i tried...it doesn't work...the phone becomes all weird.
I think someone just posted a B7620 clean rom over at Modaco, if anyone of you wants to try and give feedback:
http://www.modaco.com/content-page/298479/req-help-with-gt-b7620-aka-giorgio-armani/page/40/
Yep, it is dask.. helping me trying to create a perfect slim rom and later we will see
Chooo
So has anyone come up with a light, clean ROM for the B7620?
P
Problem with my GTI8000
Hi
i dont know if this is the rite section to place my question.
i have a bit of a problem with my samsung Gt i8000
i have this phone for a year now and it came with wm6.1 build 5.2.21006.1.2.74
and if i try to update with KIES the samsung software for my phone it say there is a firmware update but when i try to update it say your version:
pda:IH3 / Phone:JD1 / CSC:027
and then there is no firmware update for you available ??
this is the first time i try to update my firmware and its also the first time i used the program KIES new version of samsung software to controle and arange stuff on your phone.
sorry for the bad gramma and language because its not my native language.
Best regard's ron
ROM request threads in DEVELOPMENT are NOT DONE in my honest opinion. Also, please don't revive request threads like this.
Closed.

New to HTC Mega

heya guys.
i just bought myself a new Mega last week, and i kinda wondering can you guys recommend which ROM should i pick to flash it? i browsed the ROM section but i don't know which one i should pick. and some of the roms are filled with programs that i don't even know of. which is why i ask for your recommendations.
thanks in advance.
Hello, think that you have to ask yourself why you want to change the stock ROM? Not happy with it? What do you want to see improved? Do you want a lite version or full version?
Ideally you try a few of them and see which one you like best. But first of all would read the posts with the various Rom's so you have an idea what they offer.
Personally can recommend the Rom of Billabongstaff which I use myself. Also read the "new to Rom's" thread.
Succes.
heya again.
i've explored every thread about roms on HTC Mega but i can't seem to find any suitable roms that i really want to use. there's a few nice ones but i don't even know some of the programs installed in that roms. so i need someone to answers me these questions so that i could decide which roms that i should flash.
1. My HTC mega version is
ROM: 1.28.707.3 (66092)
Radio Version : 3.49.25.05
WinMo : 6.5 Pro (build 21854.5.0.80)
Is this an old rom version? Should i upgrade it or stick with it?
2. If i should upgrade it, can i flash 6.5.5 rom onto my phone? what's the difference with original 6.5?
3. If i should stick with it, can anyone suggest what good programs that i may install to this phone? so far i only find SPB Shell and Facebook that's good enough for me.
thanks in advance.
amienzero said:
heya again.
i've explored every thread about roms on HTC Mega but i can't seem to find any suitable roms that i really want to use. there's a few nice ones but i don't even know some of the programs installed in that roms. so i need someone to answers me these questions so that i could decide which roms that i should flash.
1. My HTC mega version is
ROM: 1.28.707.3 (66092)
Radio Version : 3.49.25.05
WinMo : 6.5 Pro (build 21854.5.0.80)
Is this an old rom version? Should i upgrade it or stick with it?
2. If i should upgrade it, can i flash 6.5.5 rom onto my phone? what's the difference with original 6.5?
3. If i should stick with it, can anyone suggest what good programs that i may install to this phone? so far i only find SPB Shell and Facebook that's good enough for me.
thanks in advance.
Click to expand...
Click to collapse
Amienzero, would be nice if that is available but do not expect a resume of all Rom's for Mega....
1 If you can not decide on a Rom because you do not know the programs used than the search function can help you so it becomes quickly clear what they are about.
2 The Rom you have is pretty new for 6.5. You can upgrade to built 21912 (or 21909 in custom Rom) but do not expect a lot of difference.
3 WM 6.5.5 is more finger friendly than 6.5 but it is also a matter of taste.
4 To decide which program you need or like simply read about the application section in Mega or general Windows Mobile but foremost try them yourself. If you read the posts you notice a few popular ones mentioned.
Succes.
thanks Frank C for answering my questions.
okay, i've looked up about WinMo 6.5.5 and i'm interested with it. say if i use HSPL, then flash the 6.5.5 rom. then if i'm not satisfied with it i can just perform a hard reset, right? then i'll be back to the original 6.5?
No if you do hard reset, the rom won't change.
You have to install original rom again.
Find attached comparison between WM 6.5-6.5.3-7......
And the article:
http://winmo.techparaiso.com/windows-phone-7-series-specs-and-comparison-to-previous-versions/
thanks everyone for replying.
but now i have a new problem. i haven't flash any roms yet but now the today screen shows clock instead of battery. how can i fix that? before it shows the battery indicator but recently i did a hard reset (i messed up the touchflo2d ) and now instead of battery, it shows the time. now i got 2 clock on my today screen. please help.
Try:
Start/Settings/Clock & Alarms and uncheck the box saying 'display clock on title bar in all programs'
This should sort it
sweet! that fixes it. thanks! i wonder how that got ticked.
time to get back hunting clean 6.5.5 rom or wait for that android.
okay, one last question.
my mega uses qwerty input to enter text. is there a way or a program that can change the input to numpad text input? when i pressed the keyboard button in the middle, it only gave me the qwerty and input method (Pin Yin) option.

[Q] TEST ANDROID over other Windows Mobile ROM

I want to know if it is worth a try? What do you think? I sounds like a good idea
source:
mskip said:
I dont know what Roms you have available for your device but it may be worth adding a section with what Roms (stock or custom) work with Android and what ones arent working correctly. While Android is emulated, there are still some WinMo drivers that affect the operation of your Android port and certain Roms may not work.
It may be worth trying to flash a different Rom and then try Android again.
Mark.
Click to expand...
Click to collapse
I currently use:
ROM-Version (Vodafone)Switzerland German: 1.41.166.1, (10904) Radio:0.63.05.41
the next one I will try is:
[ROM][25.06.2011][WWE-ITA-FRA-ELL-GER-RUS-SPA-NLD-DAN] ver 3.10 nsourm -build 29022
ver.5 - RUU_Signed_????no_sense_clean.nbh is without sense and cookies home tab and without extra apps.
http://forum.xda-developers.com/showthread.php?t=801481
The nsourm rom is highly recommended and very stable (version 3.1) I also run this base WM6.5 ROM too (without sense and without cookies home tab). It seems to be quite compatible with the Android port as it mostly follows stock rom philosophy.
The other optional cab that has been installed is the stock icons.cab located here as without it, my SPB shell doesn't show all the icons properly. I have no problems with the Android Loader 1.0 dual boot application (set to autoboot after 10 seconds). I'd first flash the stock ROM then this one if wanting to change from another custom ROM.
you tried over nsourm 3.1 and Android works well, but have you tried over your stock ROM? and have you noticed any difference? such as. that something works better, or that something is not working at all?
I have not tried Android with my stock ROM and don't want to go back to stock ROM either as I still need to use WM6.5 from time to time - because there is no Garmin for Android! Stock ROM used to crash often whereas with nsourm 3.1 it is definitely much more stable given it incorporates more recent builds. I would assume that given nsourm is close to stock ROM philosophy (but with much more recent builds) that there would not be much difference to anything that ran in Android. Maybe someone has already tested for the differences.. and can let us know the results!
Hi, 15Ma1l,
I tried four different of HTC Official ROMs for my htc mini, and I can say: There isn't any Difference and all of them were same when booting android. and I knew this idea for months.
but I didn't tried nsourm ROM, because of arabic persian unicode support?
thank you for answers !
iPlasm could you please write a list with these ROMs you already tried?
15MA1L said:
thank you for answers !
iPlasm could you please write a list with these ROMs you already tried?
Click to expand...
Click to collapse
Sure, I will
1- The Originally Phone's ROM. (I don't know what was the Name of ROM image)
2- RUU_Photon_HTC_ARA_1.36.415.4_Radio_Signed_32.2807.05.06_0.63.05.41_Ship
3- RUU_Photon_HTC_ITA_1.36.408.1_Radio_Signed_32.2803.05.06_0.63.05.36_Ship
4- RUU_Photon_hTC_Asia_WWE_1.36.707.3_Radio_Signed_32.2803.05.06_0.63.05.36_Ship
And now I'm on HTC Asia WWE, forth once.
If there is better than these ROM images, I will Thank you for you... but IT Must support Unicode arabic and persian

Categories

Resources