Related
Does anyone know if Viper is working on Nougat?
ShaunWinSC said:
Does anyone know if Viper is working on Nougat?
Click to expand...
Click to collapse
Working great, check out WETA.
BewareAlbatross said:
Working great, check out WETA.
Click to expand...
Click to collapse
Thanks, I was looking to use with stock.
Are you running WETA? How is it?
Working great on stock. Using Arise Numbers with Dolby Atmos.
ShaunWinSC said:
Thanks, I was looking to use with stock.
Are you running WETA? How is it?
Click to expand...
Click to collapse
I've been running WETA and so far its running great. It has an aroma installer that lets you install the mods that you want and leave off the ones you don't so you can keep it close to stock.
therock3181 said:
Working great on stock. Using Arise Numbers with Dolby Atmos.
Click to expand...
Click to collapse
I'm not familiar with Arise
ShaunWinSC said:
Thanks, I was looking to use with stock.
Are you running WETA? How is it?
Click to expand...
Click to collapse
This.
therock3181 said:
Working great on stock. Using Arise Numbers with Dolby Atmos.
Click to expand...
Click to collapse
And this.
I prefer running using Magisk v6 with the viper4 addon but Numbers is excellent as well, just waiting for WETA to support Magisk a little more cleanly before I head back to it. But if you don't use Android Pay or similar or for some other reason care about Magisk then WETA will get you up and running REALLY quickly with a great Nougat build. And it works fine with Magisk to a great extent, just a couple minor picayunes that I'm hoping will go away with time.:good:
Arise is basically Viper with Dolby Atmos. Tbh Viper is too much for me, as long as Dolby is working on stock N that has enough of an effect ,'m good to go But if you look back in the Arise thread, maybe back a week or so, i made a post saying that I finally got Viper/Dolby including SPEAKER See Speaker was something I was struggling to get to work on stock N with things like Spotify, play music, YouTube, even notifications, and some other things... basically every sound that comes out of the speakers except phone calls, unless it was via Bluetooth. Bluetooth was working overall, headphones were working overall and I even somehow found out locally stored music was working with speaker, but not those other things I had previously mentioned, was so weird. And of course it made it even more confusing bec some N users were saying it was fully working and others were in my situation.
That was until I found a post by user @SixFourSix he said to add/edit this certain file in system/etc . I went ahead and did that and after weeks of struggling, I had finally figured it out thanks to his tip. Everything was working with Viper and Atmos, those things I mentioned, except for one thing, phone calls, with Bluetooth I'm pretty sure it has an effect, but anything else with calls, for some reason, no. Don't know why. And I hadn't seen anyone comment on why. Maybe Arise isn't supposed to do that.
Yeah so go back to my posts in the Arise thread if you'd like, you'll see exactly what I mean.
Good luck
therock3181 said:
Working great on stock. Using Arise Numbers with Dolby Atmos.
Click to expand...
Click to collapse
Just flash the numbers zip in recovery and that is all you have to do?
d1ez3 said:
Just flash the numbers zip in recovery and that is all you have to do?
Click to expand...
Click to collapse
Can you provide a link to numbers, I'm having trouble finding it. :good:
ShaunWinSC said:
Can you provide a link to numbers, I'm having trouble finding it. :good:
Click to expand...
Click to collapse
I couldn't either I had to post in their thread, it's here
https://www.androidfilehost.com/?w=files&flid=108832
d1ez3 said:
I couldn't either I had to post in their thread, it's here
https://www.androidfilehost.com/?w=files&flid=108832
Click to expand...
Click to collapse
Are you running this with stock N? Everything work ok?
ShaunWinSC said:
Are you running this with stock N? Everything work ok?
Click to expand...
Click to collapse
Just did a second ago. Everything working perfectly. It looks like it flashes 3 apps. I used the Viper atmos one and it is working for me. I installed busybox too. I also flashed EX kernel today earlier, not sure if that matters
d1ez3 said:
Just did a second ago. Everything working perfectly. It looks like it flashes 3 apps. I used the Viper atmos one and it is working for me. I installed busybox too. I also flashed EX kernel today earlier, not sure if that matters
Click to expand...
Click to collapse
I'll have to give it a try. Now to wait for Xposed.
ShaunWinSC said:
Can you provide a link to numbers, I'm having trouble finding it. :good:
Click to expand...
Click to collapse
http://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
Click androidfilehost and you will find Numbers as a folder.
BewareAlbatross said:
This.
And this.
I prefer running using Magisk v6 with the viper4 addon but Numbers is excellent as well, just waiting for WETA to support Magisk a little more cleanly before I head back to it. But if you don't use Android Pay or similar or for some other reason care about Magisk then WETA will get you up and running REALLY quickly with a great Nougat build. And it works fine with Magisk to a great extent, just a couple minor picayunes that I'm hoping will go away with time.:good:
Click to expand...
Click to collapse
I'm trying to get Viper to work with Magisk,
I tried the zip from the magisk modules thread but it's asking me to install drivers at launch (which I didn't). Also tried selinux to permissive and force v4a, but didn't get it to process the audio. I also freezed music fx, but still wasn't getting anything.
I was running a song from SoundCloud to see if v4a was working
How did you manage to make it work with Magisk
Sent from my Nexus 6P
Picayune! Great word!!
therock3181 said:
Working great on stock. Using Arise Numbers with Dolby Atmos.
Click to expand...
Click to collapse
i have stock android 7
flashed dolby atmos but not working
where to find working one?
rowihel2012 said:
i have stock android 7
flashed dolby atmos but not working
where to find working one?
Click to expand...
Click to collapse
Change Selinux?
Sent from my Nexus 6P using XDA-Developers mobile app
I was rooted, had xposed installed and realized that the fingerprint scanner is much slower and not as responsive as when i am on stock B27 or just stock and rooted.
Stock = less than a second to unlock
Stock + root = less than a second to unlock
Stock + root + xposed (without modules yet) = more than a second to unlock and device performance seems to take a hit. UI lags very often.
I have tried this on a clean setup as well same issue. anyone else with xposed having similar or better experience?
clementinox said:
I was rooted, had xposed installed and realized that the fingerprint scanner is much slower and not as responsive as when i am on stock B27 or just stock and rooted.
Stock = less than a second to unlock
Stock + root = less than a second to unlock
Stock + root + xposed (without modules yet) = more than a second to unlock and device performance seems to take a hit. UI lags very often.
I have tried this on a clean setup as well same issue. anyone else with xposed having similar or better experience?
Click to expand...
Click to collapse
I had the same issue on b20, but couldn't figure out what was causing it. Do you have gravitybox? Maybe some part of it is affecting how quickly the phone wakes up?
clementinox said:
[...] Stock + root + xposed (without modules yet) [...]
Click to expand...
Click to collapse
xxBrun0xx said:
[...] Do you have gravitybox? [...]
Click to expand...
Click to collapse
I guess not.
Loader009 said:
I guess not.
Click to expand...
Click to collapse
Sorry, wasn't fully awake when I read your post. I'll try installing Xposed and see if there's a noticeable delay.
xxBrun0xx said:
Sorry, wasn't fully awake when I read your post. I'll try installing Xposed and see if there's a noticeable delay.
Click to expand...
Click to collapse
I had modules before (xprivacy, xposed additions and Audio Stream Music Default). But on the clean install I had just xposed and still the same issue.
Looks to me that there might be some interfering between Mifavor UI and xposed.
They should really consider going stock when they release Nougat. Less hassle for them to maintain and easier for us to deal with.
clementinox said:
I had modules before (xprivacy, xposed additions and Audio Stream Music Default). But on the clean install I had just xposed and still the same issue.
Looks to me that there might be some interfering between Mifavor UI and xposed.
They should really consider going stock when they release Nougat. Less hassle for them to maintain and easier for us to deal with.
Click to expand...
Click to collapse
Just wanted to update this. I install Rovo's newest framework (3.1) and slow fingerprint issues are gone! Not sure what changed, but even with gravitybox, the scanner is lightning fast.
xxBrun0xx said:
Just wanted to update this. I install Rovo's newest framework (3.1) and slow fingerprint issues are gone! Not sure what changed, but even with gravitybox, the scanner is lightning fast.
Click to expand...
Click to collapse
I also on latest firmware no issues on finger print unlock... Using gravity box also
Sent from my ZTE A2017U using Tapatalk
Sorry this is off topic, but what kind of tweaks do you guys use Gravity Box for in regards to this phone?
xxBrun0xx said:
Just wanted to update this. I install Rovo's newest framework (3.1) and slow fingerprint issues are gone! Not sure what changed, but even with gravitybox, the scanner is lightning fast.
Click to expand...
Click to collapse
`SBR` said:
I also on latest firmware no issues on finger print unlock... Using gravity box also
Sent from my ZTE A2017U using Tapatalk
Click to expand...
Click to collapse
Thanks for the reply guys!
I think I might have figured the root cause of the issue. I installed my modules one by one and realized that uninstalling xprivacy module fixed the issue. It's unfortunate since it was one of my favourite modules
my modules for whoever is interested:
-Audio Stream Music Default - pressing volume keys anytime changes media volume instead of ringtone volume
-xposed additions - cutomize volume keys with multiple taps, long presses for multiple use on lockscreen, screen on/off (i use it for long press volume up or down to switch tracks)
-xprivacy - to control what permissions apps use (but doesnt seem to work with MiFavor so i disabled it)
I had this problem while I was on b20, it went back to normal after I went and updated to b27 via @DrakenFX 's method.. When I came back up with b27, root, xposed, bl unlock, haven't had the slow fingerprint problem If it helps anyone else..
xxBrun0xx said:
Just wanted to update this. I install Rovo's newest framework (3.1) and slow fingerprint issues are gone! Not sure what changed, but even with gravitybox, the scanner is lightning fast.
Click to expand...
Click to collapse
`SBR` said:
I also on latest firmware no issues on finger print unlock... Using gravity box also
Click to expand...
Click to collapse
I'm having issues using Gravitybox. I get the "Gravitybox module not responding" message.
Other modules are ok.
How did you install it?
Odeen_c said:
I'm having issues using Gravitybox. I get the "Gravitybox module not responding" message.
Other modules are ok.
How did you install it?
Click to expand...
Click to collapse
are you in latest Xposed and Gravitybox for MM?
enable the gravity Box and do a complete reboot.. for safer side click give permission to Storage before opening the app. that's all i tried and it works no issues.
`SBR` said:
are you in latest Xposed and Gravitybox for MM?
enable the gravity Box and do a complete reboot.. for safer side click give permission to Storage before opening the app. that's all i tried and it works no issues.
Click to expand...
Click to collapse
Do I have to give permissions to xposed or gravitybox? How do du do that? In app info->permissions?
Odeen_c said:
Do I have to give permissions to xposed or gravitybox? How do du do that? In app info->permissions?
Click to expand...
Click to collapse
App info> permission for gravity box... By default it should ask when you open gravity box
Sent from my ZTE A2017U using Tapatalk
`SBR` said:
App info> permission for gravity box... By default it should ask when you open gravity box
Click to expand...
Click to collapse
Unfortunately it doesn't work. It doesn't ask me to grant permissions.
All I get is this...
Odeen_c said:
Unfortunately it doesn't work. It doesn't ask me to grant permissions.
All I get is this...
Click to expand...
Click to collapse
can you share the screenshots of Xposed, it's not recognize the Xposed installed or activated in your phone.
`SBR` said:
can you share the screenshots of Xposed, it's not recognize the Xposed installed or activated in your phone.
Click to expand...
Click to collapse
Here it is
Odeen_c said:
Here it is
Click to expand...
Click to collapse
Looks strange... Not sure what is creating the issue...
Here is mine
Sent from my ZTE A2017U using Tapatalk
Odeen_c said:
Here it is
Click to expand...
Click to collapse
Can you check if the module is activated under the modules tab in the xposed app
clementinox said:
Can you check if the module is activated under the modules tab in the xposed app
Click to expand...
Click to collapse
Currently it's not activated.
But 2 days ago, when I installed it firstly, after reboot I couldn't use the phone: it couldn't even get to the pin screen. It was continously doing a screen on and off.
I had to uninstall gravitybox via adb from my pc.
But it has to work (it says you have to activate it) even if it's not activated. At least, on my other device (Moto x style) it does.
Was hoping to learn what folks are using root for. I am using substratum but would love to have an advanced power menu but wasn't sure where to look. Would also love some ideas of what others are using root for, for ideas. Thanks!
Xposed framework
YouTube no ads.
Viper4android
Adaway
Sony xperia launcher
+1 for Adaway. I'm also waiting for kernel sources and for kernel devs to bless us with screen calibrations, memory improvements, and other goodies
george241312 said:
Xposed framework
YouTube no ads.
Viper4android
Adaway
Sony xperia launcher
Click to expand...
Click to collapse
Is there exposed for Oreo?
No
vergilbt said:
No
Click to expand...
Click to collapse
Doesn't look like viper works for oreo either? So what yall do on oreo after rooting?
Tasker, adaway, root Explorer and deleting unnecessary apps?
There are a lot of needs...
And viper4android. But unfortunately I didn't install it (I'm used to use the Magisk module)
Anybody is running viper?
What are folks using for advanced power menu on oreo?
I was rooted on 7.1.1 for Substratum. I am on 8.0 and unrooted since Substratum works without root on Oreo.
Oreo, rooted.
•Magisk + testing Magisk modules that might work with Oreo
•RootExplorer
•Android pay
•Titainium Backup
•Light Flow + Light Flow legacy
•Substratum (legacy)
•Kernel Auditor
•Waiting on a working TWRP doesn't absolutely need root, but an unlocked bootloader, custom recovery and root seems to go together.
And whatever else fun I find to mess around with.
Root is a must for me. I like the full control of the device I own. And again, it's fun!
george241312 said:
Xposed framework
YouTube no ads.
Viper4android
Adaway
Sony xperia launcher
Click to expand...
Click to collapse
Which viper4android did u flash? I can't make any work
Yeah... I was going to say. Why root at this point? The only thing I can think of is doing a Titanium Backup so I can backup the apps WITH the data. I don't know of any app that can backup the apps with data of an unrooted phone, do you? Other than that... I dunno. What you think?
12paq said:
Oreo, rooted.
•Magisk + testing Magisk modules that might work with Oreo
•RootExplorer
•Android pay
•Titainium Backup
•Light Flow + Light Flow legacy
•Substratum (legacy)
•Kernel Auditor
•Waiting on a working TWRP doesn't absolutely need root, but an unlocked bootloader, custom recovery and root seems to go together.
And whatever else fun I find to mess around with.
Root is a must for me. I like the full control of the device I own. And again, it's fun!
Click to expand...
Click to collapse
I don't want a phone that the vendor or carrier control.
I own it and I scold be able to do what I want.
The only thing on a phone that should ever be locked it the radio partition so they can control how the device accesses the network.
Other than that, leave my phone alone.
Greenify's best battery-saving features require both root and Xposed.
I also really like the GMS Doze Magisk module for battery savings.
And I never want to do without the ability to use EX Kernel Manager or Kernel Adiutor to squeeze some more battery and performance out of my device via scheduler and governor options. Some of the options for this phone (hexacore mode, adaptive low-memory killer) are pretty intriguing and can't be edited otherwise.
nrage23 said:
I was rooted on 7.1.1 for Substratum. I am on 8.0 and unrooted since Substratum works without root on Oreo.
Click to expand...
Click to collapse
Is it possible to theme the navbar with Substratum on Oreo?
primaleph said:
Greenify's best battery-saving features require both root and Xposed.
I also really like the GMS Doze Magisk module for battery savings.
And I never want to do without the ability to use EX Kernel Manager or Kernel Adiutor to squeeze some more battery and performance out of my device via scheduler and governor options. Some of the options for this phone (hexacore mode, adaptive low-memory killer) are pretty intriguing and can't be edited otherwise.
Click to expand...
Click to collapse
Your philosophy is flawed...
Xposed just being installed is an enormous battery drain in it's current incarnation...
You're better off without Xposed if you're looking for battery
Sent from my PH-1 using Tapatalk
rignfool said:
Your philosophy is flawed...
Xposed just being installed is an enormous battery drain in it's current incarnation...
You're better off without Xposed if you're looking for battery
Click to expand...
Click to collapse
Is that also true for systemless Xposed? If so, I'm glad to disable it.
primaleph said:
Is that also true for systemless Xposed? If so, I'm glad to disable it.
Click to expand...
Click to collapse
Just having Xposed and gravitybox made it so I was draining at about twice the rate as without... At idle... In my pocket
Sent from my PH-1 using Tapatalk
Teloah said:
Is it possible to theme the navbar with Substratum on Oreo?
Click to expand...
Click to collapse
Yes. Just get a theme with nav bar options.
nrage23 said:
Yes. Just get a theme with nav bar options.
Click to expand...
Click to collapse
Thanks, works like a charm.
I have a trouble with jOnePlus Call recording Feature it doesn't work.
I also tried EnableOOSNativeCallRecording v1.0 from here and didn't worked.
What is the best APP or MOD to enable call recording in OREO beta 14 OOS
( Rooted)
Install xposed and the module gravity box for oreo, there you can activate call recording, this works for me.
Please give feedback if it works for you too
Anonymouze said:
Install xposed and the module gravity box for oreo, there you can activate call recording, this works for me.
Please give feedback if it works for you too
Click to expand...
Click to collapse
Is there a way without Xposed?
Abdulaziz6p said:
Is there a way without Xposed?
Click to expand...
Click to collapse
I'm sorry but I don't know
Just use the Magisk Module. Works fine.
Yes... Use magisk module... Works for me too...
Try to give permissions to stock recording app and it will work!
Rick0x7 said:
Just use the Magisk Module. Works fine.
Click to expand...
Click to collapse
Didn't worked
siddheshvartak said:
Yes... Use magisk module... Works for me too...
Click to expand...
Click to collapse
Didn't worked
Abdulaziz6p said:
Didn't worked
Didn't worked
Click to expand...
Click to collapse
Sorry to hear that it didnt work.
It should work non the less. I'd do a fresh install if you really want this to work. Magisk is the way that works for all of us.
Rick0x7 said:
Sorry to hear that it didnt work.
It should work non the less. I'd do a fresh install if you really want this to work. Magisk is the way that works for all of us.
Click to expand...
Click to collapse
It did not work on ob14 as discussed already in ob14 thread and here https://forum.xda-developers.com/on...ble-call-recording-boot-t3634292/post77163120
strongst said:
It did not work on ob14 as discussed already in ob14 thread and here https://forum.xda-developers.com/on...ble-call-recording-boot-t3634292/post77163120
Click to expand...
Click to collapse
Thanks.
تم الإرسال من ONEPLUS A5000 باستخدام Tapatalk
*
strongst said:
It did not work on ob14 as discussed already in ob14 thread and here https://forum.xda-developers.com/on...ble-call-recording-boot-t3634292/post77163120
Click to expand...
Click to collapse
Works fine on OB14 here. Try the July 23th version.
I understand that there are many different configurations and alot of variables that might change how things work for everyone. But here's my setup that works fine with, everything really:
OB14+twrp(codeworx)+magisk(+busybox, +callrecording) +xposed(whole lot of m).
-eos-
Rick0x7 said:
*
Works fine on OB14 here.
Click to expand...
Click to collapse
As you can read, it's depending on the region and will be disabled after a while. In Germany it's not working anymore, ob13 it was.
So maybe you live in a region where oneplus allows it.
I am also in Germany, and it has worked since OB14's release day. ; )
Perhaps install busybox and make sure youve got your basics right.
I think that covers it all, best of luck.
Rick0x7 said:
I am also in Germany, and it has worked since OB14's release day. ; )
Perhaps install busybox and make sure youve got your basics right.
I think that covers it all, best of luck.
Click to expand...
Click to collapse
Are you talking about the Magisk module https://forum.xda-developers.com/oneplus-5/themes/app-enable-call-recording-boot-t3634292 or the fact that it is not natively working on ob14?
Oh and I already tried multiple times with stock ob14, busybox(cause I need it for other purposes) and the above mentioned magisk native call rec enabler from @shadowstep. It's not working anymore.
Did you made a clean installation of ob14 or an update from ob13?
NOTE** After a week of using edexposed it was evident that my battery life suffered, as such please be aware of this trade off, for me it's simply not worth it but please read on if you're fine with it.. you'll still get a day but the difference is clear.
Xposed - Gravity box
Pre- requisites
Unlocked bootloader
Rooted
Magisk installed.
Process
------------
Download this: https://github.com/RikkaApps/Riru/releases
Install it using magisk
Reboot
Download this: https://github.com/ElderDrivers/EdX...6.2/EdXposed-YAHFA-v0.4.6.2.4529.-release.zip
Also install it using magisk.
Reboot
Open xposed and update to the full version.
Reboot
Download this: https://github.com/GravityBox/Gravi...0.0.0-beta-7_q/GravityBox_Q_10.0.0-beta-7.apk
Install it.
Activate in Xposed
Activate the Xposed manager too.
Reboot
Make activate the second you need then once complete
Reboot.
Once you've made one change your can alter on the fly
There's an image of what it looks like on my phone afterwards, I can't post it here as it's an edit, just check the thread
Thanks @burtonlax for reminding me that Xposed is still a thing.
It will appear off center as it's relative to the screen, bare in mind our cut out is on the left
If this thread looks odd, its because it started out as a question.
So with the latest yahfa canary and edxposed in App List mode with SafetyNet Pass enabled, safety net is passing for me. GPay will let me set up contactless payment if I want to.
vsTerminus said:
So with the latest yahfa canary and edxposed in App List mode with SafetyNet Pass enabled, safety net is passing for me. GPay will let me set up contactless payment if I want to.
Click to expand...
Click to collapse
So from what I have, what would I update?
Cheers man this is great to know.
Currently removed the clock from the status bar. Prefer it to on the left.
K-Klock may cause a bootloop so haven't tried that.
Short of finding a way to get FSBI working (which would require xposed - I tried edxposed yahfa, no luck) I haven't found a way.
Our icon blacklist does not have positional clocks, and the substratum theme I tried just resulted in a bootloop.
I badly want to put the clock back on the right side but so far I haven't found a way to do it.
Try gravitybox
burtonlax said:
Try gravitybox
Click to expand...
Click to collapse
Didn't that use xposed?
vsTerminus said:
Short of finding a way to get FSBI working (which would require xposed - I tried edxposed yahfa, no luck) I haven't found a way.
Our icon blacklist does not have positional clocks, and the substratum theme I tried just resulted in a bootloop.
I badly want to put the clock back on the right side but so far I haven't found a way to do it.
Click to expand...
Click to collapse
Thanks.
The right side? Why?? That would look mental.
Take a look at my screenshot
Battery round the camera, networks on the right, would have been perfect to have the clock in the middle, why would it wasn't the clock on the right too?
Anyway nvm appreciate your response. I think carbon has this option and probably PA. I'll probably the up on one of them.
Cheers.
dladz said:
Didn't that use xposed?
Click to expand...
Click to collapse
Yeah
burtonlax said:
Yeah
Click to expand...
Click to collapse
Have you installed xposed on Android 10 ?
There are several xposed apps I used to use but I haven't seen anything about it on this phone or my last one. The last phone I had, most the mods started to fall to work.
Personally I wouldn't go for xposed, should have put that in the OP.
dladz said:
Have you installed xposed on Android 10 ?
There are several xposed apps I used to use but I haven't seen anything about it on this phone or my last one. The last phone I had, most the mods started to fall to work.
Personally I wouldn't go for xposed, should have put that in the OP.
Click to expand...
Click to collapse
Yeah I'm running it now for an AOD mod on my OP8pro.
burtonlax said:
Yeah I'm running it now for an AOD mod on my OP8pro.
Click to expand...
Click to collapse
Of crap really lol
Which one did you install? Any info would be great
dladz said:
Of crap really lol
Which one did you install? Any info would be great
Click to expand...
Click to collapse
Edxposed, the yahfa one
burtonlax said:
Edxposed, the yahfa one
Click to expand...
Click to collapse
? You decided that the clock looked better on the left?
never heard of it tbh. How did you install it? The chap above seemed to be having issues.
I've just come across an issue myself, my phone has two OS's one is carbon the other is oxygen, trying to get back to oxygen.
This AB **** is really crap. Just doesn't need to be this tedious
EDIT: Just flashed the zip from oneplus to both slots then formatted data in stock recovery. Back now
I don't know but it would be a nice addition for your magisk rom module.
Perhaps even add full date next to clock?
Daniel Hjelvik said:
I don't know but it would be a nice addition for your magisk rom module.
Perhaps even add full date next to clock?
Click to expand...
Click to collapse
I agree
I'm trying to find the time which needs to be edited to move the clock.
Apparently it was changed to avoid notches..
Besides xposed there must be a way.
So yep gravity box seems to be our only way at the moment.
Added a guide to the op.
Sorry I know it's not easier to accomplish but that's avenue in 2020
PS: little off centre. It's already smiting me.
Added the date, looks ok now
I think it looks more natural on the left.
*chef kiss*
Obviously doesn't pass safetynet with xposed, but worth it for GravityBox and the stuff it enables me to do.
vsTerminus said:
*chef kiss*
Obviously doesn't pass safetynet with xposed, but worth it for GravityBox and the stuff it enables me to do.
Click to expand...
Click to collapse
Hmmm, where's your signal?