So I thought about rooting my device and installing a stock rom for awhile. I successfully rooted the device and then I prepared to install a custom rom. I used odin to install TWRP and afterwards I created a backup, however the tutorial I was reading said to put my rom into a folder on my device. Problem is im not able to access my device through my computer because it is not recognized by windows. So now whenever I power it off it will just power back on and go to a screen with a battery, that says KERNEL IS NOT SEANDROID ENFORCING and below it the device says Set Warranty Bit : kernel. what do i do? Tried resetting to factory default and nothing happened.
Is the bootloader locked on the phone?
Maybe this will help: http://forum.xda-developers.com/showthread.php?t=2448794&page=5
Related
Hello,
Im sure there is a walk thorugh somewhere but I am unable to find one that has been able resolve my issue. I have recently attempted to root my phone using cf-auto root.I am using a Note 3 sm-n900w8 bell mobility. I am unable to restore the frimware or factory reset my device, each time it will get stuck in the boot page apon start up stating boot mode- seanoid enforcing. I am able to turn the device on and use it if I turn the device on in boot mode then select restart.
I am unable to factory reset the device within the phone menu itself or using kies. Kies actually cannot detect the device.I have tried an ova updated and it wont let me as i am running a custom frimware. I have attempt to locate and find the original frimware and im having difficulty doing so. I have yet to trip knox. Can any one point me in the right direction or to the correct frimware. The current frimware on my device is n900w8vlucnb7
So I've only had this phone for about a week now and just tried to install TWRP on my phone with the TWRP app from google play once rebooted 'm now stuck on a screen that says:
SECURE FAIL: KERNEL
Start Up Failed
Your device didn't start up successfully. Use the Verizon Software Repair Assistant on a computer to repair your device.
What do I do?!
Things I've tried to do:
I tried hooking it up to my computer but it doesn't detect it but makes a sound when connected?
Even though I'm on fully stock rom but my device is rooted with kingroot i planned on using ODIN to go back to stock rom just to see if anything would happen but still wouldn't detect my phone, I'm lost and miss my baby, it's the only phone I have right now currently and I need it for work.
My phone is on 5.0.1 btw
Do you have kies and the drivers installed?
Samsung Galaxy J5 Prime - SM-G570F
Build - MMB29K.G570FXXU1AQB5
OS - Android Marshmallow 6.0.1
I tried to root the OS. I managed to connect to ODIN and did a recovery from a recovery file shared over internet. However that recovery has a password pattern which didn't allow me to access my phone. After several attempts phone showed a message saying that phone will reset to factory settings. After which phone stuck at Initial LOGO.
Please provide some inputs in getting my phone operational.
Dear Experts, Please help!
android_sriniram said:
Samsung Galaxy J5 Prime - SM-G570F
Build - MMB29K.G570FXXU1AQB5
OS - Android Marshmallow 6.0.1
I tried to root the OS. I managed to connect to ODIN and did a recovery from a recovery file shared over internet. However that recovery has a password pattern which didn't allow me to access my phone. After several attempts phone showed a message saying that phone will reset to factory settings. After which phone stuck at Initial LOGO.
Please provide some inputs in getting my phone operational.
Click to expand...
Click to collapse
There may be two things which may be done
1. Since you've done factory reset The first boot may take some time so wait for 20min and make sure it's working
2. If it's not working yet . Then the recovery file you've have flashed is wrong or you've flashed in the wrong partition . There is also chance that you've interupted the process.
These flashing tools are somewhat complicated I've faced many problems because if any settings weren't set correctly then it would mess all your mobile and also the version you use is very important..
So, contact the developers who are working for the specified mobile for more help. Because they would have over come these issues .
Suggestion:- Never Experiment the odin on your mobile without knowing the every detail before
Hi Guys,
Today I think I bricked my phone and I would appreciate any help.
I will describe the whole situation.
So around 2019 May, I rooted my device and decided to flash a stock based,debloated custom rom. Everything work just fined including downloading mode and recovery menu. Today, I decided to try out [S7/S7 Edge][OneUI Pie][JetBlackUI] LightROM, however strangely I was not able to boot either to TWRP neither to downloading mode via key combination.
However I had install TWRP app and from there i was able to boot to recovery mode,install the new rom and try it out.
For some reason root was not enabled in the new rom, so i figured I will try to do it via TWRP however I was unable to boot, since root access is needed to boot from TWRP app + key combo still did not work.
After searching on google, I found a poprgram which can do the trick. (Recovey-Download (CMD)
With this I was able to boot to recovery mode. Now I thought, since all this mess up was started with the new roms, I decided to restore my original stock rom, which I had a back up of. It booted up first and seemed okay, but I was curious if this solved the issues with the key comb, so I tried it going downloading mode, but it only worked with the program ((Recovey-Download (CMD)), and I saw that it is probably not gonna be good, since it only had the blue screen, but no data in the upper left corner.
Then I restarted the device and now it say " Custom binary blocked by FRP lock". and turns off itself.
I saw that FRP lock could be solved easly with Odin fresh install, problem is I have no idea how to go downloading mode. ( Assuming at this point I still can).
Sorry for the long essay but i think the more detail the easier to diagnose. Also, thank you for reading.
I would greatly appreciate any help.
BR
Csaba
Managed to solve it with USB JIG.
Is your phone an Exynos/Snapdragon variant?
csesztes said:
Managed to solve it with USB JIG.
Click to expand...
Click to collapse
Hey, how did you manage to get your phone into dl mode with an USB jig? I want to try this out, but you're the only one here who's confirmed that you were able to do this on an S7 Edge.
Hello all,
I have been a long-time peruser of this site, but this is the first time I couldn't find a good answer to my issue.
My phone (SM-G950F) ran out of power, I didn't notice till after it died completely. When I tried to turn it on while charging it displays the message "Custom binary blocked by FRP lock" on the logo screen, then turns off. If plugged in to a charger, it'll just keep booting like that in a loop. I'm not even able to access recovery, only the download mode. I'm not against factory resetting my phone, however I have important data that in the phone storage I need to keep. I have searched online and youtube with no success.
Any ideas or suggestions will be much appreciated.
NOTE: Before the phone battery died, i wasn't tinkering with any setting that may lead to this; just regular use
flash it with odin
Flash official firmware..but make sure to use HOME_CSC not CSC...to keep your data...then boot direct to download mode after flashing ia done and flash twrp recovery
I have same issue bot Windows dosn't see my phone (drivers installed) so I'm unable to flash it. I can see only unrecognizable device in windows device manager. Is there any hope to fix it. Please help
mic225 said:
Flash official firmware..but make sure to use HOME_CSC not CSC...to keep your data...then boot direct to download mode after flashing ia done and flash twrp recovery
Click to expand...
Click to collapse
How to rid rmm and kg without 7 days?