Hello,
Im sure there is a walk thorugh somewhere but I am unable to find one that has been able resolve my issue. I have recently attempted to root my phone using cf-auto root.I am using a Note 3 sm-n900w8 bell mobility. I am unable to restore the frimware or factory reset my device, each time it will get stuck in the boot page apon start up stating boot mode- seanoid enforcing. I am able to turn the device on and use it if I turn the device on in boot mode then select restart.
I am unable to factory reset the device within the phone menu itself or using kies. Kies actually cannot detect the device.I have tried an ova updated and it wont let me as i am running a custom frimware. I have attempt to locate and find the original frimware and im having difficulty doing so. I have yet to trip knox. Can any one point me in the right direction or to the correct frimware. The current frimware on my device is n900w8vlucnb7
Related
I attempted to flash a new modem into the Omega 7 ROM through Mobile Odin so that I could get working mobile data.
The flash was successful, and the phone rebooted.
However, upon rebooting I was welcomed with the "System software not authorized by AT&T has been found on your phone."
ODIN will not work. The process to reflash fails at "apnhlos" mark. I have no idea what this means.
Can anyone PLEASE help me?
UPDATE: Problem has been fixed. I was able to reboot into Download Mode, plug in to Kies on my PC, and reinstall the official AT&T update. This did unroot my phone, but putting it all back was not a problem.
My advice to those using locked bootloader phones (AT&T and Verizon) is to make sure a project can actually be done on your phone.
MaliciousBanjo said:
I attempted to flash a new modem into the Omega 7 ROM through Mobile Odin so that I could get working mobile data.
The flash was successful, and the phone rebooted.
However, upon rebooting I was welcomed with the "System software not authorized by AT&T has been found on your phone."
ODIN will not work. The process to reflash fails at "apnhlos" mark. I have no idea what this means.
Can anyone PLEASE help me?
Click to expand...
Click to collapse
My unrooted s4 phone gets stuck with the blue colour legend Recovery booting. I am unable to enter safe mode, any ideas? been surfing google for 12hrs with no proper answer. Thanks!!
JMS23 said:
My unrooted s4 phone gets stuck with the blue colour legend Recovery booting. I am unable to enter safe mode, any ideas? been surfing google for 12hrs with no proper answer. Thanks!!
Click to expand...
Click to collapse
Download Kies for your PC, boot into download mode, and reinstall the Official Firmware. It'll unroot your phone and set you back to ground zero, but the phone will safely boot and you can restart from there.
hi xda guys this is my story
i have an at&t samsung s4 on android 4.2 i have tried to update it via wifi to 4.4
but no use. a message appear say's " your device is up to date "
i have tied "loki way" it failed
i have tried "odin tool way' it failed it won't complete the proses
i have tried samsung kais it fail's too a message says no update for this device
***** i managed to root the device
and then i found the safestrap apk i have insert the TWRP recovery
i have made a backup in case something go's wrong
and i have tries to flash a clean google s4 4.4.4 rom
**** and then the the phone stuck of samsung logo and vibrate often .the TWRP is lost
**** i have tried to recover the the via samsung kias it made it wors
now it have message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
i have tried via odin using the official firmware that i have downloaded. but did not work olso
i have tried the kais recovery mode but i did not get the recovery code
help my friend what should i do
nead you help desperately
any help
any help any one
:fingers-crossed:
You need to go to the at&t section on xda. This section is not for your phone.
Because you don't give any details about the Odin error, I can't help you further.
Most Odin errors can be solved by:
- Other cable
- Other usb port
- Other pc.
So I thought about rooting my device and installing a stock rom for awhile. I successfully rooted the device and then I prepared to install a custom rom. I used odin to install TWRP and afterwards I created a backup, however the tutorial I was reading said to put my rom into a folder on my device. Problem is im not able to access my device through my computer because it is not recognized by windows. So now whenever I power it off it will just power back on and go to a screen with a battery, that says KERNEL IS NOT SEANDROID ENFORCING and below it the device says Set Warranty Bit : kernel. what do i do? Tried resetting to factory default and nothing happened.
Is the bootloader locked on the phone?
Maybe this will help: http://forum.xda-developers.com/showthread.php?t=2448794&page=5
Wanted to find some deleted videos on my device and found some aplications that needed root to work ,
so I installed odin , downloaded some root and flash device , odin said "PASS" but my S7 were stuck at booting screen(just showing logo)
I restarted it ,tried everything from safe mode to factory reset , didn't boot , tried to flash one more time , it was stuck at connecting ,
so I made my phone brick , what can I do to fix this if I even can ?
I know im idiot I had 0 skill with this but I was saving for a long time to get this phone and this shall not be our last moment.
Model SM-G935F
I was using root from rootjunkysdl site, (Samsung_G935x_EX_Rooted-BOOT.zip)
I would realy appreciete any help since on reddit and android central my thread is ignored.
download samsung drivers to your computer, connect to smart switch click on more then emrgerency initialization and recovery follow instructions.
Im not trying to recover files , im trying to unbrick my phone
SmartSwitch has a phone firmware recovery option also.
Sent from my SM-G935F using Tapatalk
Go to sammobile and download the latest firmware for your phone. Hold volume down, home and power to boot into download. Connect phone to PC and use Odin (if Linux use Heimdall) to Flash the firmware. If you need more guidance you can find info on here or Google about flashing with Odin on our device.
Samsung Galaxy J5 Prime - SM-G570F
Build - MMB29K.G570FXXU1AQB5
OS - Android Marshmallow 6.0.1
I tried to root the OS. I managed to connect to ODIN and did a recovery from a recovery file shared over internet. However that recovery has a password pattern which didn't allow me to access my phone. After several attempts phone showed a message saying that phone will reset to factory settings. After which phone stuck at Initial LOGO.
Please provide some inputs in getting my phone operational.
Dear Experts, Please help!
android_sriniram said:
Samsung Galaxy J5 Prime - SM-G570F
Build - MMB29K.G570FXXU1AQB5
OS - Android Marshmallow 6.0.1
I tried to root the OS. I managed to connect to ODIN and did a recovery from a recovery file shared over internet. However that recovery has a password pattern which didn't allow me to access my phone. After several attempts phone showed a message saying that phone will reset to factory settings. After which phone stuck at Initial LOGO.
Please provide some inputs in getting my phone operational.
Click to expand...
Click to collapse
There may be two things which may be done
1. Since you've done factory reset The first boot may take some time so wait for 20min and make sure it's working
2. If it's not working yet . Then the recovery file you've have flashed is wrong or you've flashed in the wrong partition . There is also chance that you've interupted the process.
These flashing tools are somewhat complicated I've faced many problems because if any settings weren't set correctly then it would mess all your mobile and also the version you use is very important..
So, contact the developers who are working for the specified mobile for more help. Because they would have over come these issues .
Suggestion:- Never Experiment the odin on your mobile without knowing the every detail before