Problems after flashing Lollipop 5.02 on SM-G530H - Galaxy Grand Prime Q&A, Help & Troubleshooting

Hello to all!
I flashed my Samsung Galaxy Grand Prime (SM-G530H) with the latest ROM available downloaded from SAMMobile. I installed the rom, rooted it and everything worked perfectly. The problem is that after about one week I start getting crashes and program and processes forced closures, until it starts resetting itself.
Any ideas about what could be causing this?
Thanks for any help!
mquirox

Did you formatted data/cache etc, before flashing?

Yes, I did
Zapryanovv said:
Did you formatted data/cache etc, before flashing?
Click to expand...
Click to collapse
Yes, I did format data cache. Any other ideas?
Thanks for your reply

Before to flash, format everything! :good:
If your baseband version is:
- XXU, download this and flash it! ---> http://www.sammobile.com/firmwares/download/60382/G530HXXU2BOJ1_G530HUUB2BOJ1_TPA/
- XCU, download this and flash it! ---> http://www.sammobile.com/firmwares/download/59187/G530HXCU1BOJ2_G530HOXE1BOI3_CAC/. These are latest builds! (09 OCT.) I hope to helps!

Factory reset your phone with a custom recovery, I prefer TWPR, boot ur phone into download mode and flash lollipop again with odin, i think this wil solve your probems, only issue is that you´ll lose your data.

Related

[Q] I think I broke my phone... Gt-I9505

Hi everyone.
For years I've been coming here finding answers to problems that I've had. It seems I'm finally special enough to have to make a new thread.
Phone: S4 Gt-I9505
Carrier: Vodafone New Zealand
I rooted my phone with cf-autoroot and CWM on the stock 4.2.2 version of android. I then went looking for ROMs and found the leaked (didn't know it was at the time) 4.3 version from google. I installed that and whoopee! We got along well for the first two days, but I restarted my phone on day three and that's where the problem started.
Upon reboot, my phone powered onto the Samsung splash screen, but went no further. Confused, I did a factory recovery in CWM and it still didn't go. I reinstalled the rom and it went again fine, until reboot when it hung on the splash screen again. I tried various roms and fixes and just made a mess of my phone.
Long story short, I now have TWRP on my phone with the abyss 1.3.1F kernel installed and no ROM. Is there any step by step process that someone could give me on how to proceed with TWRP and which ROM/kernel to install to get me up and running again? Not fussy on which rom but one with no bloatware would be excellent. I would be eternally grateful! :fingers-crossed:
Thanks!
Download the latest version which is I9505XXUBMGA either Odin or CWM from here, if you flash via Recovery you need to wipe data & factory reset, cache partition and dalvik cache before flashing but you can flash via Odin
I prefer to use Philz Touch recovery than TWRP
Crauze said:
Download the latest version which is I9505XXUBMGA either Odin or CWM from here, if you flash via Recovery you need to wipe data & factory reset, cache partition and dalvik cache before flashing but you can flash via Odin
I prefer to use Philz Touch recovery than TWRP
Click to expand...
Click to collapse
Thank you Crauze, Will try now.
EDIT: That rom is going to take ages to download. I'll update when it's done in a few hours.
Crauze said:
Download the latest version which is I9505XXUBMGA either Odin or CWM from here, if you flash via Recovery you need to wipe data & factory reset, cache partition and dalvik cache before flashing but you can flash via Odin
Click to expand...
Click to collapse
Hi, you have touched on an issue I am trying to understand.
Do you only need to wipe you data and caches when you used custom recovery to flash a ROM but not when you use Odin on a PC?
Sent from my GT-I9505 using xda app-developers app
The above answer worked perfectly. Thank you!
jcodde said:
Hi, you have touched on an issue I am trying to understand.
Do you only need to wipe you data and caches when you used custom recovery to flash a ROM but not when you use Odin on a PC?
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
I haven't flashed a custom ROM via Odin before but boot into Recovery and wipe data & factory reset, cache partition and dalvik cache and power off device and boot into Download Mode and flash via Odin

[Q] Rooted, custom rom installed but not booting anymore

Hello,
Ii have rooted my S4 device with the procedure from XDA (root original rom with keeping update availability). This was done succesfully. After that TWRP was flashed without problems. Than i decided to installl Omega 9 custom rom. The installation went fine and i could use it for three days. A great rom but after a restart my device will not boot anymore and shows only the Samsung logo. Wiping is possible but trying to restore a backup failed....... Do i have to apply root again? Any help is appreciated to solve my problem! Thanks a lot.
Best regards,
Mark
Dataking said:
Hello,
Ii have rooted my S4 device with the procedure from XDA (root original rom with keeping update availability). This was done succesfully. After that TWRP was flashed without problems. Than i decided to installl Omega 9 custom rom. The installation went fine and i could use it for three days. A great rom but after a restart my device will not boot anymore and shows only the Samsung logo. Wiping is possible but trying to restore a backup failed....... Do i have to apply root again? Any help is appreciated to solve my problem! Thanks a lot.
Best regards,
Mark
Click to expand...
Click to collapse
Go to recovery and try wipe cache dalvik and fix permissions and reboot should work fine
.
Wipe Dalvik cache shows error: FAILED
Dataking said:
Hello,
Ii have rooted my S4 device with the procedure from XDA (root original rom with keeping update availability). This was done succesfully. After that TWRP was flashed without problems. Than i decided to installl Omega 9 custom rom. The installation went fine and i could use it for three days. A great rom but after a restart my device will not boot anymore and shows only the Samsung logo. Wiping is possible but trying to restore a backup failed....... Do i have to apply root again? Any help is appreciated to solve my problem! Thanks a lot.
Best regards,
Mark
Click to expand...
Click to collapse
Install Philz Touch recovery in downloadmode, this will help you http://d-h.st/wSF.
I reflashed Philz Touch with ODIN successfully but the recovery mode did not came up. How is this possible? Back to TWRP now with same problems......
If you already have the omega 9 rom in your phone...try to reflash it via recovery .....don't have to wipe data....but do it to be safe....I think it should work...I really hope it works...sorry about your phone
sadeshmagic said:
If you already have the omega 9 rom in your phone...try to reflash it via recovery .....don't have to wipe data....but do it to be safe....I think it should work...I really hope it works...sorry about your phone
Click to expand...
Click to collapse
Already flashed it several times but still hanging in the boot and no way to use the phone.
Dataking said:
Already flashed it several times but still hanging in the boot and no way to use the phone.
Click to expand...
Click to collapse
Well the only other option is to download a ROM that can be flashed via Odin.....hopefully your download mode works.....i think you can find several compatible ROMs in the forums.....try that out....as a last resort
sadeshmagic said:
Well the only other option is to download a ROM that can be flashed via Odin.....hopefully your download mode works.....i think you can find several compatible ROMs in the forums.....try that out....as a last resort
Click to expand...
Click to collapse
Well, download mode works fine, TWRP works fine, flashing ROM works fine, ROM itselfs works great, until i have to reboot. After booting it hangs in the boatloader and i have to flash rom again.........................to get access.
Dataking said:
Well, download mode works fine, TWRP works fine, flashing ROM works fine, ROM itselfs works great, until i have to reboot. After booting it hangs in the boatloader and i have to flash rom again.........................to get access.
Click to expand...
Click to collapse
Well do you merely flash the ROM? try wiping cache afterwards and setting permission....if that doesn't work try to reflash stock firmware....thats your best bet
:good::good::good::good:
I found the solution using method 3:
http://www.ibtimes.co.uk/articles/4...i9500-gti9505-unbrick-softbrick-hardbrick.htm
This will help some other people too.

[Q] Problem after flashing CF-Auto Root S5 SMG900F

Hi guys im a bit rusty again in all this since i rooted my S3 and HTC desire years ago ,
I have an Galaxy S5 SM-G900F (bought seperately without any provider)(EU)
after 2-3 months now and getting the official android 5.0 upgrade, i thought it be time to Root my device again ,
i followed this link and how to from ChainFire "http://forum.xda-developers.com/showthread.php?t=2696537"
wich i been using on my Galaxy Tab 7 Lite(T110) as well and worked flawlessly
I followed the exact steps as usual , rooting went fine, phone rebooted as it should , i updated SUPERSU and its binaries and installed Ericson's Busybox,. ,and everything worked as it should ,
then i put off my phone and boot in to recovery mode to flash the Philz_touch_6.26.1-klte.zip (touch recovery)
when im in my stock recovery i facepalm'd myself because i hadnt put the flashable recovery file on my internal storage yet ,
so i wanted to reboot back in the phone so i could put the file on my internal storage so id be able to flash it from stock recovery ,,..
this is where it all got strange,.
My phone stays black after Boot logo, gives me errors like ,. SYSTEM UI STOPPED ,. and so on for about everything that keep the phone running , i mean really everything STOPS , after about 15 minutes and klicking away all the Stopped msg's , it just reboots again to do the same.
i tried starting the phone in SAFE MODE ,. . Same thing,...
this all just came up after i booted to STOCK RECOVERY ,. and back to Android without changing anything,.
Android 5.0
Stock Rom
CF Autoroot klte SM-G900F
Please help ?
Thank you in advance
Mike130784 said:
Hi guys im a bit rusty again in all this since i rooted my S3 and HTC desire years ago ,
I have an Galaxy S5 SM-G900F (bought seperately without any provider)(EU)
after 2-3 months now and getting the official android 5.0 upgrade, i thought it be time to Root my device again ,
i followed this link and how to from ChainFire "http://forum.xda-developers.com/showthread.php?t=2696537"
wich i been using on my Galaxy Tab 7 Lite(T110) as well and worked flawlessly
I followed the exact steps as usual , rooting went fine, phone rebooted as it should , i updated SUPERSU and its binaries and installed Ericson's Busybox,. ,and everything worked as it should ,
then i put off my phone and boot in to recovery mode to flash the Philz_touch_6.26.1-klte.zip (touch recovery)
when im in my stock recovery i facepalm'd myself because i hadnt put the flashable recovery file on my internal storage yet ,
so i wanted to reboot back in the phone so i could put the file on my internal storage so id be able to flash it from stock recovery ,,..
this is where it all got strange,.
My phone stays black after Boot logo, gives me errors like ,. SYSTEM UI STOPPED ,. and so on for about everything that keep the phone running , i mean really everything STOPS , after about 15 minutes and klicking away all the Stopped msg's , it just reboots again to do the same.
i tried starting the phone in SAFE MODE ,. . Same thing,...
this all just came up after i booted to STOCK RECOVERY ,. and back to Android without changing anything,.
Android 5.0
Stock Rom
CF Autoroot klte SM-G900F
Please help ?
Thank you in advance
Click to expand...
Click to collapse
Boot to recovery, wipe the caches, reboot, see how you get on then
*Detection* said:
Boot to recovery, wipe the caches, reboot, see how you get on then
Click to expand...
Click to collapse
thank you for your reply
i have wiped the Cache partitions as its the only cache to wipe in stock recovery,. rebooted ,. but still the same thing
Mike130784 said:
thank you for your reply
i have wiped the Cache partitions as its the only cache to wipe in stock recovery,. rebooted ,. but still the same thing
Click to expand...
Click to collapse
Did you use the latest version of ODIN to flash the CF Root?
Think Odin3 v3.10.6 is the latest current version
If you used an old version, try flashing it again using the new one, other than that, I can only suggest trying to fix permissions in recovery if it has that option, TWRP should have it, and finally a factory reset, which is not ideal
*Detection* said:
Did you use the latest version of ODIN to flash the CF Root?
Think Odin3 v3.10.6 is the latest current version
If you used an old version, try flashing it again using the new one, other than that, I can only suggest trying to fix permissions in recovery if it has that option, TWRP should have it, and finally a factory reset, which is not ideal
Click to expand...
Click to collapse
i used Odin3-v3.07
but after flashing the root everything worked installed superSU and updated it and its binaries and installed busybox,.
it all stopped working after i went into Stock Recovery and back
id prefer not to do a factory reset Wipe,. unless i really have to to fix it ,.
im going to try reflash with the latest version then,.
i have swapped SD card to galaxy tab to put the Flashable touch recovery on the SD card, and swapped back to the phone so i could Flash the Recovery when im in stock ,.
but ill try flashing Root with latest Odin first.. thank you
*Detection* said:
Did you use the latest version of ODIN to flash the CF Root?
Think Odin3 v3.10.6 is the latest current version
If you used an old version, try flashing it again using the new one, other than that, I can only suggest trying to fix permissions in recovery if it has that option, TWRP should have it, and finally a factory reset, which is not ideal
Click to expand...
Click to collapse
the new odin is a bit less informative (to me as beginner)
i managed to use AP to flash the root again
all goes fine , it reboots
and its now upgrading android as it says and opening app's
then Black screen again,. i klick a button,. and it shows me again all the STOPPED msg's of all internal apps that are crashing,. litterally all apps,
what can i do ?
If clearing cache didn't work, fixing permissions in recovery didn't work, only thing left I can think of is factory reset
--
*Detection* said:
If clearing cache didn't work, fixing permissions in recovery didn't work, only thing left I can think of is factory reset
--
Click to expand...
Click to collapse
i cant fix persmission in stock recovery and flashing the philz touch recovery didnt work something about not verify signature,.
al i can do i guess is wipe data factory reset ,.but im affraid it wont fix anything
Try TWRP recovery instead
http://teamw.in/project/twrp2/229
No reason a factory reset won't fix things, worst comes to worst, flash the whole ROM again from ODIN, that will fix everything as it wipes and reinstalls the lot
Grab a stock ROM from sammobile
Thank you for all your replys mate..
I managed to get it working again by doing a factory reset in stock recovery after I flashed root with latest odin
Even tho it was my last resort there was nothing else I guess .
I'm not sure tho if this will happen again when I go back to recovery like I did when this all happend the first time while I actually want to flash a more advanced recovery then stock recovery ..
But I'll take my chances and just leave it as it is
Again thank you for your help and suggestions .
This thread could be closed
Sent from my SM-G900F using XDA Free mobile app
Pleased you got it working again, I would say if you think you might want to flash another advanced recovery in the future, it might be best to do that now since you have already factory reset the phone, that way if this happens again, you don't lose months of data and settings and files that you have gathered between now and whenever you decide to flash recovery
*Detection* said:
Pleased you got it working again, I would say if you think you might want to flash another advanced recovery in the future, it might be best to do that now since you have already factory reset the phone, that way if this happens again, you don't lose months of data and settings and files that you have gathered between now and whenever you decide to flash recovery
Click to expand...
Click to collapse
i have actually ,. i installed the TWRP u mentioned,. by taking there app from the Playstore,. and flashed the new recovery, within android and without rebooting (just in case)
im used to the old CWM thats why i first wanted the Touch recovery as its based on it,
but always open for trying new things
Thank you
Good stuff
Id say the whole entering recovery / apps crashing thing was a problem with the ODIN version you used to root, too old for Lollipop is my guess, so I wouldn't worry about entering recovery again.

System UI Crash Loop - Plz Help

I really need some advice here, I haven't been able to use my note 3 for a few days now.. Every time I reboot, about 3-4 mins into using I get "system ui has stopped" fc - I am using Resurrection Remix 5.6.8 MM Rom w/openGapps6stock - I have tried everything it seems.. even reflashing the stock firmware and starting from 0 again, and this system ui fc happens everytime.
Bug Report Attached.
Thanks in advance for having a look, any help would be appreciated.
R,
Jordan
Device: Samsung Note 3 Intl Qualcomm SM-N9005
PreFlash Build: LRX21V-BOK4 Stock SM LP5.0 Firmware w/cf auto rooted
Recovery: TWRP 3.0.2.
Via recovery mounts and storage .
Format system data cache .
Flash your chosen rom .
JJEgan said:
Via recovery mounts and storage .
Format system data cache .
Flash your chosen rom .
Click to expand...
Click to collapse
what do I select in twrp's mount?
Are you performing a factory wipe immediately after flashing a stock ROM?
audit13 said:
Are you performing a factory wipe immediately after flashing a stock ROM?
Click to expand...
Click to collapse
Yes, if I dont do so, the flash will suspend and give a message saying to factory reset first.
I have never seen that message when flashing any Samsung phone via Odin.
audit13 said:
I have never seen that message when flashing any Samsung phone via Odin.
Click to expand...
Click to collapse
This is flashing via TWRP 3.0.2.0
You're using twrp to flash a stock rom? I recommend using Odin or heimdall for flash a stock rom from sammobile.com.
sorry for the confusion mate. When I flash stock I use Odin only.. after all completed.. I will then factory reset again and wipe on twrp.. If I forget to wipe steps, the flash suspends with a message advising me to wipe first. I am going to update to Resurrection Remix 5.6.9 and see how it goes for stability fixes with the UI.
Possible its TWRP try Philz Recovery .
Sent from my SM-N920C using XDA-Developers mobile app

cannot go back to stock firmware?

hi, Im actually on crdroid and I need to go back to stock samsung firmware
I downloaded G900FXXS1CPK1_G900FITV1CPJ1_G900FXXU1CPJ1_HOME.tar and I tried to flash using odin
stuck at SAMSUNG logo after rebooting (for a split of a second I can see a dead android with NO COMMAND written before SAMSUNG logo)
go back to recovery /(which is not TWRP anymore) and wiped data and cache. nothing has changed
I now have installed crdroid again but I need to go back to official samsung, somebody can help?
where did you get the tar file from? did it say completed in Odin?
from updato.com and odin sais PASS with green color
EDIT is there, maybe, a custom rom from original samung firmware?
wiping data and cache from recovery not enough, do a factory reset then if still a no go redo odin fw flash
vincom said:
wiping data and cache from recovery not enough, do a factory reset then if still a no go redo odin fw flash
Click to expand...
Click to collapse
a factory reset is just wiping system, cache and dalvik in essence. I always do a factory reset, wipe cacke, dalvik and system 3x each and delete the android folders if im just flashing a new ROM. Plus, hes doing an Odin flash, so wiping shouldnt be necessary, but deleting the android folders should still be needed
---------- Post added at 12:22 PM ---------- Previous post was at 12:22 PM ----------
zazolo said:
from updato.com and odin sais PASS with green color
EDIT is there, maybe, a custom rom from original samung firmware?
Click to expand...
Click to collapse
get it from sammobile.com/firmwares. Thats the only real place to get them. everywhere else can have untrusted files
odin does not wipe/reset
in stock recovery iirc theres no wiping data, so reset needs to be done, its solved many fw updates/downgrades issues via either ota or odin.
i usually wipe everything(Dalvik, System, Data, Cache) via twrp b4 flashing w/odin
while I'm downloading from sammobile (sloooooooooow), I'm tring to flash fw again
I'm still getting SAMSUNG logo problem...
tried wiping again cache... nothing
flashed TWRP and did wipe factory reset... again, same issue.
I did a full wipe before flash
zazolo said:
while I'm downloading from sammobile (sloooooooooow), I'm tring to flash fw again
I'm still getting SAMSUNG logo problem...
tried wiping again cache... nothing
flashed TWRP and did wipe factory reset... again, same issue.
I did a full wipe before flash
Click to expand...
Click to collapse
the sammobile d/l does take FOREVAAAAR!!! but wait for that to complete and try it. im betting that your other tar.md5 was corrupt
15 minutes to go....
steps I did:
1: via TWRP wiped EVERYTHING
2: connected to PC in download mode and flashed the firmware via ODIN 3.12
3: booted in recovery and wiped data/factory reset and cache partition
4: reboot and...... seems to work fine (feared for a moment, took almost 20 minutes to start apps optimization)
zazolo said:
steps I did:
1: via TWRP wiped EVERYTHING
2: connected to PC in download mode and flashed the firmware via ODIN 3.12
3: booted in recovery and wiped data/factory reset and cache partition
4: reboot and...... still stuck at SAMSUNG LOGO
Click to expand...
Click to collapse
how long did u wait at logo
try this version of odin, i never had a fail w/it on my s5, in odin only use the "AP" button and leave settings as they are.
ODINv3.10
corrected my original post, after 20 minutes of waiting, started apps optimization, thanks to everybody
zazolo said:
steps I did:
1: via TWRP wiped EVERYTHING
2: connected to PC in download mode and flashed the firmware via ODIN 3.12
3: booted in recovery and wiped data/factory reset and cache partition
4: reboot and...... seems to work fine (feared for a moment, took almost 20 minutes to start apps optimization)
Click to expand...
Click to collapse
cool. told ya we could get ya up and running
also, the initial boot after the Odin flash can take forever too
Can somebody please help me. I flashed a new firmware with odin. It flashed sucssesfully but it keeps restarts on samsung logo so it doesn't boot on. Please guys help me to fix this problem ???
mrllokman said:
Can somebody please help me. I flashed a new firmware with odin. It flashed sucssesfully but it keeps restarts on samsung logo so it doesn't boot on. Please guys help me to fix this problem ???
Click to expand...
Click to collapse
whats the model of your phone, what odin version did you use, what firmware did you flash and where did you get it from?
youdoofus said:
whats the model of your phone, what odin version did you use, what firmware did you flash and where did you get it from?
Click to expand...
Click to collapse
I have Sm G900H, my odin version is 3.11.1 I flashed the firmware from sammobile. It boots up only if i install cyanogenmod.
I think I have problem with kernel. I don't know please help
mrllokman said:
I have Sm G900H, my odin version is 3.11.1 I flashed the firmware from sammobile. It boots up only if i install cyanogenmod.
I think I have problem with kernel. I don't know please help
Click to expand...
Click to collapse
what version of android is the cyanogenmod you had installed and what version are you flashing in Odin?
youdoofus said:
what version of android is the cyanogenmod you had installed and what version are you flashing in Odin?
Click to expand...
Click to collapse
cm13 and i wante to go back to stock G900HXXU1CPL4_G900HOXY1CPL4_G900HXXU1CPCA_HOME.tar
mrllokman said:
cm13 and i wante to go back to stock G900HXXU1CPL4_G900HOXY1CPL4_G900HXXU1CPCA_HOME.tar
Click to expand...
Click to collapse
try a fresh download of the tar.md5 and flash it in the odin posted above 3.10

Categories

Resources