Database Users

[Q] [Wind] I tried flashing FoxHound ROM, and soft-bricked my phone. Any fixes?

Alright... where to begin? Lets start at what happened around yesterday. Prior to the whole weekend, I had CyanogenMod 10.1 installed on my rooted S4. Come Friday, I start to miss some of the stock Samsung features such as Air Gestures, Smart Stay, the stock Samsung camera, and all that. So, I install WanamLite (a custom rom) on my phone. It's good and all but for some reason, the Smart Stay isn't working. To fix this, I go online and start digging; I find people saying "yo, revert back to the original firmware and re-install the Rom, that should fix your LTE problem." I think to myself, "maybe this could help me too." And that's exactly what I do. I go online to SamMobile and download this ROM (http://www.sammobile.com/firmwares/?page=1&model=SGH-M919V&pcode=0#firmware). It installs with Odin and I was able to get back to the Stock Samsung firmware. I then proceed with my plan and install WanamLite; that also worked. So I'm all happy and stuff 'cause Smart Stay finally works but, shortly after fiddling with the re-stocked device, I get bored again. So, I start searching the forums for another rom to replace WanamLite (it was a good rom, but I wanted to try something else before settling down on it).
I find this ROM in the XDA-Developers S4 forum: http://forum.xda-developers.com/showthread.php?t=2303239. I try installing it; it works fine. But then, I notice that half my SD card is used up. So, I go into TWRP and click on Format Data (I'm not too sure about the name, I had CWM prior to the re-installation of Samsung stock firmware). After resetting the Data, I boot back into the phone and notice that the default layout is Easy Mode. (On the bright side, I freed 4 GB from my SD card). Easy Mode's incredibly annoying, so I wrestle with the phone for a while to change the launcher to Nova launcher, but to no avail. In the end, I decide to reflash the FoxHound ROM. I place the rom on my phone and boot into TWRP. That's where the problem comes. I selected: wipe cache, wipe delvic cache, wipe data. Then I wiped the cache and data, flashed the rom and, after that is when the phone started refusing boot up. From then on, it just displayed Samsung Galaxy S4 logo on the screen whenever I tried to start it.
What I tried to fix the issue: Re-installing the stock samsung firmware. (I think I ended up screwing up the phone even more with this. Before, I had TWRP installed but I couldn't boot into it, now I don't have any custom recovery installed and I still can't boot into the phone).
I can access the Download Mode and use Odin. I cannot boot into the recovery. When I hold Volume Up + Power + Home, it just says recovery in blue above the logo, and then, the phone reboots.
So, any ideas on how to fix it?
TL;DR: Tried installing FoxHound Rom. I wiped Delvic Cache, Cache, and Data, and after flashing the rom, the phone refused to boot up; it gets stuck on the Samsung logo. Before flashing, I did Format Data. After being unable to boot into the phone, I tried to flash the Stock Samsung Firmware on my S4. Nothing worked. Any ideas on how I should proceed?

splitinferno said:
So, any ideas on how to fix it?
Click to expand...
Click to collapse
Try using Odin mode to install Stock Samsung Firmware...
If it doesn't work,
Install Samsung Kies, put Phone into Odin mode, connect the USB and let KIES reinstall the whole firmware... Go to "Tools" -> "Emergency Firmware Recovery"

psycovirus said:
Try using Odin mode to install Stock Samsung Firmware...
If it doesn't work,
Install Samsung Kies, put Phone into Odin mode, connect the USB and let KIES reinstall the whole firmware... Go to "Tools" -> "Emergency Firmware Recovery"
Click to expand...
Click to collapse
I've already tried flashing the Stock Samsung Firmware using Odin, it didn't work. Also, I'm having no luck with Kies; it won't connect. Any other suggestions? :/
EDIT 1: Okay, so here's the deal right now: I was able to flash TWRP using ODIN. This granted me access to my recovery, somehow. So right now, I have the FoxHound_GearEngine0.2 ROM installation files on my SD card and I am booted into the recovery. What should I do? Should I try flashing again? For now, I'll just wait for a response.
EDIT 2: Out of curiosity and impatience, I tried flashing FoxHound but got an error:
Updating Partition Details
E: unable to mount data
E: unable to mount internal storage
TWRP v. 2.5.0.3

Go into the advanced menu in TWRP and try to mount data / internal storage. If you can't, then you're back to odin unless someone can find out something else

maazali said:
Go into the advanced menu in TWRP and try to mount data / internal storage. If you can't, then you're back to odin unless someone can find out something else
Click to expand...
Click to collapse
I tried to; it didn't work. I also tried clockworkmod recovery. That recovery said it said that the data was already mounted. For some reason, now the phone is stuck in a bootloop. On the bright side, I can freely access my recovery (although I can't do much in it). Should I try flashing other stock roms?
EDIT: Flashing the stock rom brought it back to the state it was in earlier. So now, it just hangs on the Samsung Galaxy S4 screen and no longer reboots continuously. I'm thinking of downloading other stock roms and flashing those.

UNBRICKED
splitinferno said:
I tried to; it didn't work. I also tried clockworkmod recovery. That recovery said it said that the data was already mounted. For some reason, now the phone is stuck in a bootloop. On the bright side, I can freely access my recovery (although I can't do much in it). Should I try flashing other stock roms?
EDIT: Flashing the stock rom brought it back to the state it was in earlier. So now, it just hangs on the Samsung Galaxy S4 screen and no longer reboots continuously. I'm thinking of downloading other stock roms and flashing those.
Click to expand...
Click to collapse
Alright, after struggling around with the device, I was able to unbrick it. I downloaded the stock ROM from samfirmware and flashed it using odin. After flashing it, it would stay on the Samsung Galaxy S4 logo and that's it and I wasn't able to boot into the recovery either. So, I flashed TWRP using odin and download mode, and found I was able to boot into recovery again. Screwing around with the recovery, I couldn't manage to do much so I decided to re-flash the stock firmware. After re-flashing, I had the same problem. This time, I tried accessing the stock recovery. I got access, which was something I couldn't get before. After getting access, I did Factory Reset/Data (it was something along those lines) and did a wipe cache. After wiping cache, the phone rebooted and, much to my delight, it was unbricked. After going through this, I think I might just like chill for like a month, or a year now with stock... .__.

Hahah nice job
Sent from my GT-I9505 using xda premium

splitinferno said:
Alright, after struggling around with the device, I was able to unbrick it. I downloaded the stock ROM from samfirmware and flashed it using odin. After flashing it, it would stay on the Samsung Galaxy S4 logo and that's it and I wasn't able to boot into the recovery either. So, I flashed TWRP using odin and download mode, and found I was able to boot into recovery again. Screwing around with the recovery, I couldn't manage to do much so I decided to re-flash the stock firmware. After re-flashing, I had the same problem. This time, I tried accessing the stock recovery. I got access, which was something I couldn't get before. After getting access, I did Factory Reset/Data (it was something along those lines) and did a wipe cache. After wiping cache, the phone rebooted and, much to my delight, it was unbricked. After going through this, I think I might just like chill for like a month, or a year now with stock... .__.
Click to expand...
Click to collapse
Next time don't wipe data in custom recovery because it will corrupt your data which would most probably end with not booting past the Samsung logo, if you want to wipe in a custom recovery for now you have to manually wipe system, cache and dalvik cache located in mounts in cwm recovery (not sure where to find it in twrp).
You should read a little before messing with things in recovery.

Ahahah that's funny because something similar happened to me. And I was going to suggest doing a factory reset via recovery because that's how I resolved my problem, then I see you did just that! (Y)
Sent from my GT-I9500

Cant figure out how to install custom rom, without loosing root acces

Dear XDA
I have been an android user for many years and rooting has been one of the things I always did to my devices. I am an owner of a Note 3, which I have rooted succesfully and used X-NOTE 13 rom for long time. Last week I wanted to try something new and after that everything seems to be impossible. Before I install any roms I always perfom full wipe of, system, data, cache, dalvik cache etc. (I do it inside the recovery). Afterwards I tried to install CRASH ROM V9 and the progress went fine. When the phone rebooted the strange things started to happened I couldn't find the rom's extra menu and couldnt find any of the functions that the rom contained. I just thought that it was problem with the rom itself therefore I tried to went back to X-NOTE, but without any luck. The X-NOTE installed probably but I couldnt boot into it, it was stucked at the "Samsung Note 3" logo. I tried to wipe cache and dalvik but without any luck and every time I rebooted from the recovery the recovery says "it seems your device doesnt have root access" and the recovery tries to gain root access.
Then I couldnt understand anything of what was happening so I went to stock using ODIN. After installing stock rom I used CF-ROOT and everythings went smooth and I could use SuperSU inside the stock rom. Then I installed a recovery and it didn't mentioned anything about root access, so I was ready to install my custom rom...at least I thought so....I installed X-NOTE again (because I knew that this rom worked before without any problems) and after the progress was done I couldnt boot into the rom again, it was stucked. I wiped the cache and dalvik and as soon I clicked reboot in recovery it tells me that I am not rooted.
Then I did the same thing again, went back to stock, installed CF-ROOT and recovery. This time I installed CRASH ROM instead and I could boot into the system, but the rom still misses the "rooted features" etc.
In other words, what have I done wrong? I cant seem to find the problem and I think that I have tried every possible solution?
Informations:
Model: ​SM-N9005
STOCK ROM: Tried both N9005XXUENB4 (German) and N9005XXUENC2 (Nordic firmware)
Custom Rom: Tried both X-NOTE and CRASH ROM
Recoveries used: TWRP, CWM and Philz CWM
Kernels: Tried with stock one and X-NOTE kernel 1.5
I hope you can help me I cant live with stock roms
Thanks in advance
Regards,
Nepoznati

Nepoznati said:
Dear XDA
I have been an android user for many years and rooting has been one of the things I always did to my devices. I am an owner of a Note 3, which I have rooted succesfully and used X-NOTE 13 rom for long time. Last week I wanted to try something new and after that everything seems to be impossible. Before I install any roms I always perfom full wipe of, system, data, cache, dalvik cache etc. (I do it inside the recovery). Afterwards I tried to install CRASH ROM V9 and the progress went fine. When the phone rebooted the strange things started to happened I couldn't find the rom's extra menu and couldnt find any of the functions that the rom contained. I just thought that it was problem with the rom itself therefore I tried to went back to X-NOTE, but without any luck. The X-NOTE installed probably but I couldnt boot into it, it was stucked at the "Samsung Note 3" logo. I tried to wipe cache and dalvik but without any luck and every time I rebooted from the recovery the recovery says "it seems your device doesnt have root access" and the recovery tries to gain root access.
Then I couldnt understand anything of what was happening so I went to stock using ODIN. After installing stock rom I used CF-ROOT and everythings went smooth and I could use SuperSU inside the stock rom. Then I installed a recovery and it didn't mentioned anything about root access, so I was ready to install my custom rom...at least I thought so....I installed X-NOTE again (because I knew that this rom worked before without any problems) and after the progress was done I couldnt boot into the rom again, it was stucked. I wiped the cache and dalvik and as soon I clicked reboot in recovery it tells me that I am not rooted.
Then I did the same thing again, went back to stock, installed CF-ROOT and recovery. This time I installed CRASH ROM instead and I could boot into the system, but the rom still misses the "rooted features" etc.
In other words, what have I done wrong? I cant seem to find the problem and I think that I have tried every possible solution?
Informations:
Model: ​SM-N9005
STOCK ROM: Tried both N9005XXUENB4 (German) and N9005XXUENC2 (Nordic firmware)
Custom Rom: Tried both X-NOTE and CRASH ROM
Recoveries used: TWRP, CWM and Philz CWM
Kernels: Tried with stock one and X-NOTE kernel 1.5
I hope you can help me I cant live with stock roms
Thanks in advance
Regards,
Nepoznati
Click to expand...
Click to collapse
weird.
all the rom you mentioned xnote & crash come with root access inside.
When you said you used all those 3 recoveries, did you try each rom with each recovery ?
and when you flash those rom, did you follow to do a clean full wipe as mentioned on each OP thread ?
clean full wipe is not only wipe cache and dalvik, but also the data (factory reset).

antique_sonic said:
weird.
all the rom you mentioned xnote & crash come with root access inside.
When you said you used all those 3 recoveries, did you try each rom with each recovery ?
and when you flash those rom, did you follow to do a clean full wipe as mentioned on each OP thread ?
clean full wipe is not only wipe cache and dalvik, but also the data (factory reset).
Click to expand...
Click to collapse
Yes I have and tried several other combinations too. First time I installed X-NOTE I wiped everything and installed X-NOTE without problems.
I cant seem to break the code, I am getting frustrated hour by hour. I have double checked everything, I am on the NC2 bootloader with the NC2 kernel, when trying to install X-NOTE I get stuck at "Samsung Glaxy Note 3" - I cant understand what the problem may be and it is beginning to be personal :/ heheh
But seriously what could I have done wrong?

Nepoznati said:
Yes I have and tried several other combinations too. First time I installed X-NOTE I wiped everything and installed X-NOTE without problems.
I cant seem to break the code, I am getting frustrated hour by hour. I have double checked everything, I am on the NC2 bootloader with the NC2 kernel, when trying to install X-NOTE I get stuck at "Samsung Glaxy Note 3" - I cant understand what the problem may be and it is beginning to be personal :/ heheh
But seriously what could I have done wrong?
Click to expand...
Click to collapse
To be frank... I have no idea. U flash before earlier, means u know how to flash it.
What I could think of, is just the recovery.
I ve been using cwm chenglu all this time (the one reported with less bugs, and most recommended at any rom thread). And jump from rom to rom every 1 week at least with no issue.
I will try tonite use twrp to flash rom. I will let u know if I face any problem.

SOLVED
antique_sonic said:
To be frank... I have no idea. U flash before earlier, means u know how to flash it.
What I could think of, is just the recovery.
I ve been using cwm chenglu all this time (the one reported with less bugs, and most recommended at any rom thread). And jump from rom to rom every 1 week at least with no issue.
I will try tonite use twrp to flash rom. I will let u know if I face any problem.
Click to expand...
Click to collapse
Finally, finally and finally solved!
Well it seems strange but the problem was the official kernel inside the stock roms that made it almost impossible to run any custom rom.
What I did to solve the problem:
1. Went back to stock rom using a rom with the newest baseband NC2, ex. N9005XXUENC2
1a. I did have som problems getting the bootloader updated, which means I was force to install it over ODIN 3.09 - use this bootloader NC2 BOOTLOADER (Thanks soloilmeglio for the bootloader)
2. I used CF-ROOT to gain root access
3. Then I installed CWM 6.0.4.8 recovery as recommended from antique_sonic (Updated few hours ago!)
4. Install the CivZ-SnapKat-Rev3.1-sm_n9005-4.4.2.zip kernel
5. Lets the phone reboot and check that everything works!
7: Boot into recovery and wipe system, data, cache, dalvik cache
8. Install the custom rom
Dont ask me why the kernel wasn't working from beginning and why it was "corrupted" after installing another custom rom - but now everything works as it should!
Thank you very much antique_sonic for helping me!

Nepoznati said:
Finally, finally and finally solved!
Well it seems strange but the problem was the official kernel inside the stock roms that made it almost impossible to run any custom rom.
What I did to solve the problem:
1. Went back to stock rom using a rom with the newest baseband NC2, ex. N9005XXUENC2
1a. I did have som problems getting the bootloader updated, which means I was force to install it over ODIN 3.09 - use this bootloader NC2 BOOTLOADER (Thanks soloilmeglio for the bootloader)
2. I used CF-ROOT to gain root access
3. Then I installed CWM 6.0.4.8 recovery as recommended from antique_sonic (Updated few hours ago!)
4. Install the CivZ-SnapKat-Rev3.1-sm_n9005-4.4.2.zip kernel
5. Lets the phone reboot and check that everything works!
7: Boot into recovery and wipe system, data, cache, dalvik cache
8. Install the custom rom
Dont ask me why the kernel wasn't working from beginning and why it was "corrupted" after installing another custom rom - but now everything works as it should!
Thank you very much antique_sonic for helping me!
Click to expand...
Click to collapse
Good then to know ur phone is okay.
I fully wipe with twrp last nite. And flash xnote. Hang at boot after done.
Fully wipe again, and flash assassins. A lot fc here and there.
I flash back cwm chenglu, full wipe, and flash back xnote. Now it runs nicely.
My phone not suit with twrp.

antique_sonic said:
Good then to know ur phone is okay.
I fully wipe with twrp last nite. And flash xnote. Hang at boot after done.
Fully wipe again, and flash assassins. A lot fc here and there.
I flash back cwm chenglu, full wipe, and flash back xnote. Now it runs nicely.
My phone not suit with twrp.
Click to expand...
Click to collapse
It could probably be a problem with TWRP as you mentioned earlier. After using CWM everything went smooth after updating my kernel. Last night I couldnt hold me back to try one more time, and I flashed X-NOTE with TWRP and I got the same problem as described in #1 post. Then I installed CWM and flashed X-NOTE again and everything got messed up. Then I restored everything, force installed the kernel and bootlaoder. After that installed CWM and then I was able to run X-NOTE without any problem.
I am not a professional developer but I may think that the problem is TWRP when it tries to flash the kernel under the process with may results in some problems. When using CWM from the beginning I do not get any problems but when using TWRP I need to restore everything back.

Strange Wifi Problem

Background: So i bought this used S5 900f from someone and it gave me "recovery is not seandroid enforcing" error while rooting and installing recovery. i found a workaround for this error by immediately pulling the battery trick after root. I have installed TWRP and root and they work but this "Recovery is not seandroid enforcing error" still displays when i try to enter recovery for about 2-3 seconds and then the recovery boots.
Now the Problem is : My s5 900f is not saving Wifi password on any of the lollipop builds i have tried Many UK 5.0 (BTU) Builds from Sammobile , and Nordic Countries 5.0 as soon as i restart or shutdown m phone Wifi password is reset and i have to enter it again after turning my phone on again. Surprisingly When i downgrade to any of the kitkat Builds Wifi starts saving passwords just fine?
Things i have tried
Format, Clear dalvik cache, cache, data, system, internal Storage and install different 5.0 builds.
Enabling disabling Google backup, it doesn't help.
Kindly Help me out does Wifi not saving password has anything to do with this "Seandroid not enforcing Error" . And how to fix this issue i am at verge of smashing this phone. .....:angel:

http://forum.xda-developers.com/galaxy-s5/general/s5-forget-wifi-passwords-reboot-fix-t3105976

Thanks alot buddy, you just saved my phone....Phewwww do you know why it happened in the first place?

Buggy ROM is all I can think, it happened to me with a clean install of the latest LP ROM so I went looking for a fix for myself
I tweeted to Samsung UK about it, and they just talked to me like I was stupid, I guess they don't want to admit to it being their fault

UPDATE NOW after the build prop fix, i rebooted fine once... After installing TWRP the phone is crashing on boot up....touchwiz crashes along with all other programs it wont let me boot up. Maybe TWRP messed something up.

Try clearing the caches from recovery, the build.prop fix doesn't cause any issues like that, but I've had issues after flashing custom TWRP before, generally clearing caches / pulling battery fixes it

*Detection* said:
Try clearing the caches from recovery, the build.prop fix doesn't cause any issues like that, but I've had issues after flashing custom TWRP before, generally clearing caches / pulling battery fixes it
Click to expand...
Click to collapse
does your phone display "recovery is not seandroid enforcing" just before entering twrp? i tried clearing cache and battery pulling didnt work....now flashing earlier 5.O btu.

Yea, just means it's a custom recovery

*Detection* said:
Yea, just means it's a custom recovery
Click to expand...
Click to collapse
Some folks are able to flash any 5.0 build and they don't get the Build.Prop issue. i just reflashed and the issue came back...will re edit the build.prop till now i have rooted + installed TWRP no issues so far only build.prop left to be edited..... could you please tell me why is it persistent on some phones that even reflashing, formating doesn't help.

Unfortunately Nothing works....I have been more than patient with this device...been flashing and trying different things for 18 hours now. It works fine but after going to recovery (Just by entering it) and then rebooting will freeze my phone with "Unfortunately Media storage has stopped working...and everything else like touchwiz also crashes".......i was so...so wrong to move to a samsung This Definitely is my last samsung phone...for now i will keep trying different things.

Try a different recovery, Philz Touch, CWM etc
Are you definitely flashing the latest TWRP?
The way I install TWRP is using TWRP Manager from G Play store
https://play.google.com/store/apps/details?id=com.jmz.soft.twrpmanager&hl=en_GB
Install BusyBox first or it'll prompt you before doing anything
https://play.google.com/store/apps/details?id=stericson.busybox&hl=en_GB
The defaults it prompts you to change for locations can be left as they are

*Detection* said:
Try a different recovery, Philz Touch, CWM etc
Are you definitely flashing the latest TWRP?
The way I install TWRP is using TWRP Manager from G Play store
https://play.google.com/store/apps/details?id=com.jmz.soft.twrpmanager&hl=en_GB
Install BusyBox first or it'll prompt you before doing anything
https://play.google.com/store/apps/details?id=stericson.busybox&hl=en_GB
The defaults it prompts you to change for locations can be left as they are
Click to expand...
Click to collapse
Yeah i am using twrp-2.8.7.0-klte.img. Will try Philz now can u guide me to the correct CWM i cant find it anywhere. thanks

dork997 said:
Yeah i am using twrp-2.8.7.0-klte.img. Will try Philz now can u guide me to the correct CWM i cant find it anywhere. thanks
Click to expand...
Click to collapse
Should be able to find everything you need here
http://forum.xda-developers.com/showthread.php?t=2697523
Instructions for ADB manual install, and also ODIN
Philz is a big favourite over CWM - Id try Philz first
Strange your same model S5 takes a fit with TWRP, it works fine on my G900F
Might be worth trying the App install method I posted

*Detection* said:
Should be able to find everything you need here
http://forum.xda-developers.com/showthread.php?t=2697523
Instructions for ADB manual install, and also ODIN
Philz is a big favourite over CWM - Id try Philz first
Strange your same model S5 takes a fit with TWRP, it works fine on my G900F
Might be worth trying the App install method I posted
Click to expand...
Click to collapse
Thanks for your Help, i guess this problem is too complicated. Anyway this time i installed Philz recovery > formatted everything > remove user content and data > custom formatted everything > flashed 5.0 BTU. and surprisingly its saving WiFi passwords without any build prop changes. So i am going to leave it here . 5.0 Unrooted with stock recovery everything working (FOR NOW) . This time i used Odin 3.10 instead of 3.07. I hope it does not get stuck at boot logo and start crashing. Only one problem it kept connecting to "update server" evem tho i had disabled the auto update option from settings>about >updates . i restarted immediately hopefully it wont try to update again. Thanks again for your help.

Samsung Galaxy SM-G900H Problem

Hello All, i am almost new to this forum, i had bought my new SGS5 SM-G900H like 4-5 days ago, i had before a SGS4 i9500 witch i had similar problems and success and all things, i tried everything in android world, custom recovery, custom ROMs, flashing stocks ect..
The Very first step of playing in my SGS5 System was rooting it..
How i did that?
1. cf-auto-root
2. odin
3. bootloop
I was sure it was for my specific device.
Then i discovered that it was likely a wrong way of rooting it? since i watched a video on youtube and it showed flashing the supersu package via a custom recovery.. but how shall they flash a custom recovery without being rooted?
Afterwards like a miracle, i download kies 3 and plugged the phone to my laptop and launched kies, and alone the phone booted into recovery mode witch it have been stuck like 5 mins at SGS5 Logo..
What I've done later?
1. Wipe data/factory reset ( using custom rom )
2. rebooting, enjoying life saved
3. rooting the correct way by flashing supersu ( it actually worked )
I wanted to get back to the stock and wanted to permanently clean my device from being custom so i went to supersu app and chose option " permanent clean " something like that, and the phone rebooted..
i went to recovery mode to wipe data/factory reset again to fully clean the task, then i got my self stuck in boot recovery loading, it just showed up the SGS5 Logo witch freaked me..
i just went to odin and flashed the custom recovery ( hoping it will work ) everything passes in odin excepting the phone..
And from there, i am stuck till now with no recovery booting and no normal boot, only what can i do is go to download mode
Recently i am now downloading stock for my device to flash it soon..
i just wonder what i've done wrong, and help me for next time ( i would appreciate help tricks, small notifications..)
Thanks!

i also would like to know if i returned back to stock i'll be having back my recovery ?

Update : i left phone the night and came back and turned it on normally, he booted to recovery then i wiped and restarted and everything went ok.. damn i am getting pre-messed up by this phone..
now what should i do if i want to root the perfect way and have some custom recovery thing for 900H

Custoom ROM installation failed (stuck on pre-boot screen)

So I've installed TWRP onto my S8 and have wiped it completely, though I did have to change and then change back the file formats so that TWRP would register them correctly
I downloaded renovate ice 1.1, copied it onto my sd card and then flashed it everything installed well
When I then reboot it doesnt get past the first screen as in showing (not sure if it freezes at this point but have left it for 2 hours so Im guessing so)
Samsung Galaxy S8 POWERED BY android
Then the only thing I can do is get the phone back into recovery mode (then when I go to reboot it says there is no OS)
Before I installed the custom ROM I had an error message stating that the integrity verification had failed, I pressed on believing that this would be fixed once I had installed renovate
I know that my phone is a exynos variant, is there any way to check exactly what variant withing TWRP
The download mode is still working

Extra Information
and also when I go into TWRP it asks me about if it should be only system read each time it starts up
it also prompts for me to install the app when I try to reboot through TWRP though I believe that is normal

thegasovi said:
So I've installed TWRP onto my S8 and have wiped it completely, though I did have to change and then change back the file formats so that TWRP would register them correctly
I downloaded renovate ice 1.1, copied it onto my sd card and then flashed it everything installed well
When I then reboot it doesnt get past the first screen as in showing (not sure if it freezes at this point but have left it for 2 hours so Im guessing so)
Samsung Galaxy S8 POWERED BY android
Then the only thing I can do is get the phone back into recovery mode (then when I go to reboot it says there is no OS)
Before I installed the custom ROM I had an error message stating that the integrity verification had failed, I pressed on believing that this would be fixed once I had installed renovate
I know that my phone is a exynos variant, is there any way to check exactly what variant withing TWRP
The download mode is still working
Click to expand...
Click to collapse
should I try to reinstall TWRP and see what happens

thegasovi said:
should I try to reinstall TWRP and see what happens
Click to expand...
Click to collapse
I've tried to install the Batman ROM but to the same avail,
still prompting me to install the TWRP official app (but not always)
am going to try reinstalling twrp using odin
could it have anything to do with knox values changing (need to research)

installed batman rom after using Odin to BL some new firmware(think that's what its called) onto the device
now am stuck on the next boot loading screen
will wait for some time to see if its my phone
-so 1 problem was due to the previous stuff on the device hopefully this means that the integrity verification thing is fixed (not sure how to check
-still havent re-'downloaded' a new twrp via odin, may try next
-could also try reinstalling batman as it was installed before the firmware, may be worth it
-could try to use default rom (need to find download page)
not sure about next step

reinstalled renovate and booted up and got back to the verification failed screen, may have something to do with me selecting knox when I installed it
-niw will try to solve integrity verification problem as when I try to reset it wont work w/ twrp

Maybe too many little things that are causing issues, maybe rather just use Samsung Switch and do a recovery and it will reinstall as per stock, then try the rooting, custom ROM thing from scratch. I know I battled with mine, got TWRP installed but coult get passed samsung boot screen. So i did used Samsung Switch recovery function and got phone back to stock, now I just use package disablers to kill stuff and all is well.

at first, why did you choose renovate 1.1 when 2.2 is availiable?
i would start from scratch again...
flash stock rom via odin. boot and test device. there should be no problem, after this, flash twrp again and put latest renovate rom on memory or external usb device.
with aroma installation you can choose to full wipe your phone. this should make no problems.

Tim Niklas said:
at first, why did you choose renovate 1.1 when 2.2 is availiable?
i would start from scratch again...
flash stock rom via odin. boot and test device. there should be no problem, after this, flash twrp again and put latest renovate rom on memory or external usb device.
with aroma installation you can choose to full wipe your phone. this should make no problems.
Click to expand...
Click to collapse
looking back on it I guess I just didnt realise that that version was available
could you give me a link to where I can download the stock rom from, that would be great

Jostian said:
Maybe too many little things that are causing issues, maybe rather just use Samsung Switch and do a recovery and it will reinstall as per stock, then try the rooting, custom ROM thing from scratch. I know I battled with mine, got TWRP installed but coult get passed samsung boot screen. So i did used Samsung Switch recovery function and got phone back to stock, now I just use package disablers to kill stuff and all is well.
Click to expand...
Click to collapse
I tried to open samsung switch earlier but it believed that my phone was no longer supported and I guessed that this was due to the rooting, what mode where you in to be able to connect to samsung switch

not sure now but atm I cant get into TWRP anymore

Put phone into download mode, then use recovery option on switch.

thegasovi said:
looking back on it I guess I just didnt realise that that version was available
could you give me a link to where I can download the stock rom from, that would be great
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-s8/how-to/official-stock-firmware-update-odin-t3598172
take a look here,
there is described, how you can download stock rom with the tool samfirm.
keep this rom safe you may need it once or twice again.
---------- Post added at 11:05 AM ---------- Previous post was at 11:04 AM ----------
thegasovi said:
not sure now but atm I cant get into TWRP anymore
Click to expand...
Click to collapse
and again...
as long as you are abel to go into download mode, everything is fine.
flash stock again -> twrp -> custom rom with full wipe in aroma installer

reverted back to stock os using odin
checked that all is well and there was no lasting damage (knox was still working fine)
reinstalled twrp, same problem happened again with twrp not recognising the internal storage so had to reset the file format
flashed the batman rom, now am back at the second boot screen and cannot get past

thegasovi said:
reverted back to stock os using odin
checked that all is well and there was no lasting damage (knox was still working fine)
reinstalled twrp, same problem happened again with twrp not recognising the internal storage so had to reset the file format
flashed the batman rom, now am back at the second boot screen and cannot get past
Click to expand...
Click to collapse
with internal storage you mean data partition?
sorry, i forgot. thats a common known issue with twrp , wipe data partition in twrp menu, after that you are able to install custom roms