So i have an l7 bricked. It seems to boot to recovery mode only, but since it does at least that much it should be easy to fix right? Well no, after using every kdz flasher ever possible it still shows this:
Code:
03:45:38 : Launching SW update
03:45:38 : Unpacking KDZ
03:45:40 : KDZ file extraced
03:45:41 : Files were extracted.
03:45:41 : LGMobileDL Load.
03:45:41 : Port = -1
03:45:41 : Connecting to phone
03:45:41 : PHONE WAS NOT FOUND!
03:45:43 : ===FINISHED===
I installed every driver possible yet in device manager it doesn't show up at all. How the hell am i supposed to make it detect my phone?
Running win7 64 bit.
KDZ wont work on recovery mode you can try my reply here
http://forum.xda-developers.com/showpost.php?p=64033242&postcount=2
i hope it help you
Melonweed said:
So i have an l7 bricked. It seems to boot to recovery mode only, but since it does at least that much it should be easy to fix right? Well no, after using every kdz flasher ever possible it still shows this:
Code:
03:45:38 : Launching SW update
03:45:38 : Unpacking KDZ
03:45:40 : KDZ file extraced
03:45:41 : Files were extracted.
03:45:41 : LGMobileDL Load.
03:45:41 : Port = -1
03:45:41 : Connecting to phone
03:45:41 : PHONE WAS NOT FOUND!
03:45:43 : ===FINISHED===
I installed every driver possible yet in device manager it doesn't show up at all. How the hell am i supposed to make it detect my phone?
Running win7 64 bit.
Click to expand...
Click to collapse
Try booting it in emergency mode ( and you have to set phonemode to emergency not diag) like this
take out battery
hold volume up button
plug in
yellow screen will come up (it is now in emergency mode)
I had my phone stuck in recovery, and the only way to connect i in any way to kdz was emergency mode, hope it helps
Related
so.. i wanted to downgrade from 2.2 to 2.1 and i obviously did something wrong. now whenever i turn my phone on it says
[blue error handler] Arm11 is Crashed!! etc.
the thing is i cant enter clockverk or fastboot...and my phone isnt recognised by the kdz updater...even when in download mode it says phone not connected
i use back usb ports,tried without battery and memory,tried in download mode...update doesn't even start it just says PHONE WASNT FOUND
i know i'm annonying but i couldnt find the solution to this anywhere so if some1 knows how to fix this i would be grateful...
try reinstall drivers and reboot pc
use emergency mode in kdz flasher
flash firmware with fastboot, flash recovery
restore v20d from recovery backup
must work
Anton_Ch said:
try reinstall drivers and reboot pc
use emergency mode in kdz flasher
flash firmware with fastboot, flash recovery
restore v20d from recovery backup
must work
Click to expand...
Click to collapse
How do you use emergency mode in kdz flasher? What is the kdz flasher? And, how do you flash firmware with fastboot, flash recovery restore v20d from recovery backup?
The phone is not being very cooperative with me... I can get to the emergency screen but can't seem to do anything besides that. I've taken a picture of what the error screen but I'm not familure with this phone....
Please help... here is what the screen says
[Blue Error Handler V1.2] Arm11 Crash!!
[Press Volume up key] To get Randump!!
[Press Volume down key] Reboot&savelog!!
------------------------------------------
Linux Kernel Panic
Process ksoftirqd/0 (pid: 3)
------------------------------------------
PC: 0x510000
LR: _rcu_process_callbacks=0x3b4/0x4ec
pc : [<00510000>] lr:[<c00cb79c>]
psr: a0000013 sp : dd027f38
ip : 00000000 fp : 00000000
r10: 04040000 r9 : 00000002
r8 : 00000008 r7 : dd0b5d30
r6 : c06156b4 r5 : c06157dc
r4 : c06157c4 r3 : dd4a74b8
r2 : 0000000a r1 : dd0ab920
r0 : dd4a74b8
@up
.... how did u manage to install 2.2 without flashing 2.1 firmware with fastboot... ??
U had to use kdz updater for fastboot firmware....
read first:
http://forum.xda-developers.com/showthread.php?t=1032744
all the answers are there
IT'S A KERNEL ERROR
1. Have the necessary software.
- Phone Drivers
- KDZ_FW
- The Room you want to install, in my case I served in the final Android 2.1, I suppose due to the use Android 2.2 I had made a partition so I'm not allowed to return to that version of Android.
2. When we light up the phone and leave us this error screen, press the power key + the Volume Down key to set the phone into download mode or (Download Mode).
3. Disable USB LG Driver Model, this will change depending on the operating system we have in the case of windows will be in Manage> Device Manager> Modems> LG USB Drive Model -> Right Click "Disable "
4. Open KDZ_FW select type 3GQCT, Phone Mode: DIAG, consider the room to install (File *. kdz).
Cannot flash any rom on my phone
Hey there, sorry if im spamming or doing any newbie thing, i've always try to stop that.
Recently i've try to get a rom on my phone but I've just got the kernel panic (blue error handler arm11 is crashed!!) I've had that before and solved it with no problems, but this time my computers or my brother's computer do not recognize the phone, not even after disabling the modem, and just when trying to flash a KDZ, this is what i get
[R&D Test Tools Log File]
02:56:37 : Launching SW update
02:56:37 : Unpacking KDZ
02:56:47 : KDZ file extraced
02:56:53 : Files were extracted.
02:56:53 : LGMobileDL Load.
02:56:53 : Port = -1
02:56:53 : Connecting to phone
02:56:54 : PHONE WAS NOT FOUND!
02:56:56 : ===FINISHED===
I don't know what can I do, tried with 2 computers, CS_emergency mode, 3 diferents rom, disabling the modem, but nothing! Even not in download mode.... Any suggestion?
As I said b4, sorry 4 spamming and 4 my english
if this happens (mine was bricked cant turn on no download mode no nothing) just send to lg get them to help you upgrade to 2.1 then try again
Is that the only thing left i could do? No way to try to fix it? I could send to the provider, but I don't know if there's a LG provider around, I may send it to "Movistar" (where i bought it)
---------- Post added at 10:03 AM ---------- Previous post was at 09:44 AM ----------
Whats just curious, is that my pc recognizes the phone, but the KDZ updater cannot! :/
like they say.
lg modem off in device manager.
switch-mode phone to downloding.
and try again. if youre phone die at 215, try with another soft
Or, delete ALL LG drivers, then restart ur PC, install them again, connect ur phone and flash in cs emergency... if doesn't, try another KDZ, or look for an out.kdz which could help, I've got about 7 arm crashed (kernel crash) and solved them that ways I just mentioned
Sent from my LG GT540 using XDA App
one trick about drivers is that you can try to connect it to the port you've never used before on your pc to connect your phone. It should then automaticly search and install drivers to recognize your phone
To all..
To fix this when I got this error you need to reflash a fastboot 2.1 and then go into fast boot and type the commands fastboot-w to wipe it then reboot into download mode and flash the normal stock rom
Same here :/ cant fix sending back to LG
i installed cm 10.1 but gapps 10 and..
I have followed all the steps correctly. Now the reboot is complete and the screen is stuck at "unfortunately the process com.google.process.gapps has stopped" error. If I click okay I get another error "Unfortunately, setup wizard has stopped". Please help. this is urgent. i cant do anything on my phone now.
I tried with KDZ but usb debugging is not on and..
[R&D Test Tools Log File]
10:33:15 : Launching SW update
10:33:15 : Unpacking KDZ
10:33:53 : KDZ file extraced
10:34:07 : Files were extracted.
10:34:07 : LGMobileDL Load.
10:34:07 : Port = -1
10:34:07 : Connecting to phone
10:34:07 : PHONE WAS NOT FOUND!
10:34:09 : ===FINISHED===
I heard of a program "ADB" can enable USB Debugging with him?
please help me
AleexM said:
I tried with KDZ but usb debugging is not on and..
[R&D Test Tools Log File]
10:33:15 : Launching SW update
10:33:15 : Unpacking KDZ
10:33:53 : KDZ file extraced
10:34:07 : Files were extracted.
10:34:07 : LGMobileDL Load.
10:34:07 : Port = -1
10:34:07 : Connecting to phone
10:34:07 : PHONE WAS NOT FOUND!
10:34:09 : ===FINISHED===
I heard of a program "ADB" can enable USB Debugging with him?
please help me
Click to expand...
Click to collapse
If you want to flsh it via KDZ then just take out battery hold vol+ button and connect to USB. You will see yellow screen and then try to flash.
kristijan505 said:
If you want to flsh it via KDZ then just take out battery hold vol+ button and connect to USB. You will see yellow screen and then try to flash.
Click to expand...
Click to collapse
thanks man,but now the phone is blocked on lg logo when phone is starting :[
AleexM said:
thanks man,but now the phone is blocked on lg logo when phone is starting :[
Click to expand...
Click to collapse
go download mode, vol+ and - and plug in the usb cable which is already connected to your pc, and flash the kfz file
ps : you got this problem because i think you installed gapps from 4.1.2 and cm10.1 is 4.2.2, i did the same mistake
Sabyn said:
go download mode, vol+ and - and plug in the usb cable which is already connected to your pc, and flash the kfz file
ps : you got this problem because i think you installed gapps from 4.1.2 and cm10.1 is 4.2.2, i did the same mistake
Click to expand...
Click to collapse
i will try now,thanks
edit:solved.thanks Sabyn.
what is download mode and how do you get there?
eshantv said:
what is download mode and how do you get there?
Click to expand...
Click to collapse
try it with combo: vol + , vol - and power button
when i tried to updated my phone ( LG E612 ) to 4.2 by KDZ (my own was 4.0.3) at the middle of work an error :
UPGRADE Error
Wparam = 500
Lparam = 100
so the upgrade crashed and my phone is ON and didnt turn OFF even i hold the power botton
in the screen just is a note : " Download is in progress Do Not disconnect Cable." whit LG logo
what should i do?
Are you sure that 4.2 kdz is for e612/e610 ?
Did you had a custom ROM before?
Anyway, download v10d_firmware (for e610, no matter, its the same for e612/e612g/f). Flash it and then try flash that KDZ again (after you confirm its for YOUR phone)
Hello
I have problem with my KDZ Updater. I cannot flash any firmware on my phone. It will always gives me that error :
[R&D Test Tools Log File]
14:29:48 : Launching SW update
14:29:48 : Unpacking KDZ
14:30:02 : kdz decrypt error.
14:30:02 : Extract file error
14:30:04 : ===FINISHED===
I have tried different KDZ files but result is the same. Can somebody tell me how to fix it?
More details please like phone model, os, official update. If not official, what did you do? At least you need to be in offline mode and of using windows 8 you should disable driver signature
janis77 said:
Hello
I have problem with my KDZ Updater. I cannot flash any firmware on my phone. It will always gives me that error :
[R&D Test Tools Log File]
14:29:48 : Launching SW update
14:29:48 : Unpacking KDZ
14:30:02 : kdz decrypt error.
14:30:02 : Extract file error
14:30:04 : ===FINISHED===
I have tried different KDZ files but result is the same. Can somebody tell me how to fix it?
Click to expand...
Click to collapse
Have you installed MSXML? If you already had, the problem is on your windows try it on another computer.
SuperSkill said:
More details please like phone model, os, official update. If not official, what did you do? At least you need to be in offline mode and of using windows 8 you should disable driver signature
Click to expand...
Click to collapse
I have LG Optimus L5 E610,running Android 4.0.3 V10J Firmware,Windows XP computer.
it happened that I restored my phone's stock rom through a nandroid backup that I had before the first time I flashed a custom ROM, then I did the unforgivable mistake to allow an OTA update, so the phone restarted and stuck at CWM every time I retsart it. I did some search and found that this can be solved by flashing the stock rom using KDZ. So, my problem now is that every time I run the KDZ updater I get the "PHONE WAS NOT FOUND" error message. I downloaded and installed the official driver provided on LG's website but still nothing new. So, anyone has an idea on how this is fixed?
Note: The phone IS IN emergency mode so this not the problem here.
Note: I gave it a try on both windows 8.1 and windows 7
The updater's log:
[R&D Test Tools Log File]
10:51:13 : Launching SW update
10:51:13 : Unpacking KDZ
10:51:26 : KDZ file extraced
10:51:31 : Files were extracted.
10:51:31 : LGMobileDL Load.
10:51:31 : Port = -2
10:51:31 : Connecting to phone
10:51:31 : PHONE WAS NOT FOUND!
10:51:33 : ===FINISHED===