so.. i wanted to downgrade from 2.2 to 2.1 and i obviously did something wrong. now whenever i turn my phone on it says
[blue error handler] Arm11 is Crashed!! etc.
the thing is i cant enter clockverk or fastboot...and my phone isnt recognised by the kdz updater...even when in download mode it says phone not connected
i use back usb ports,tried without battery and memory,tried in download mode...update doesn't even start it just says PHONE WASNT FOUND
i know i'm annonying but i couldnt find the solution to this anywhere so if some1 knows how to fix this i would be grateful...
try reinstall drivers and reboot pc
use emergency mode in kdz flasher
flash firmware with fastboot, flash recovery
restore v20d from recovery backup
must work
Anton_Ch said:
try reinstall drivers and reboot pc
use emergency mode in kdz flasher
flash firmware with fastboot, flash recovery
restore v20d from recovery backup
must work
Click to expand...
Click to collapse
How do you use emergency mode in kdz flasher? What is the kdz flasher? And, how do you flash firmware with fastboot, flash recovery restore v20d from recovery backup?
The phone is not being very cooperative with me... I can get to the emergency screen but can't seem to do anything besides that. I've taken a picture of what the error screen but I'm not familure with this phone....
Please help... here is what the screen says
[Blue Error Handler V1.2] Arm11 Crash!!
[Press Volume up key] To get Randump!!
[Press Volume down key] Reboot&savelog!!
------------------------------------------
Linux Kernel Panic
Process ksoftirqd/0 (pid: 3)
------------------------------------------
PC: 0x510000
LR: _rcu_process_callbacks=0x3b4/0x4ec
pc : [<00510000>] lr:[<c00cb79c>]
psr: a0000013 sp : dd027f38
ip : 00000000 fp : 00000000
r10: 04040000 r9 : 00000002
r8 : 00000008 r7 : dd0b5d30
r6 : c06156b4 r5 : c06157dc
r4 : c06157c4 r3 : dd4a74b8
r2 : 0000000a r1 : dd0ab920
r0 : dd4a74b8
@up
.... how did u manage to install 2.2 without flashing 2.1 firmware with fastboot... ??
U had to use kdz updater for fastboot firmware....
read first:
http://forum.xda-developers.com/showthread.php?t=1032744
all the answers are there
IT'S A KERNEL ERROR
1. Have the necessary software.
- Phone Drivers
- KDZ_FW
- The Room you want to install, in my case I served in the final Android 2.1, I suppose due to the use Android 2.2 I had made a partition so I'm not allowed to return to that version of Android.
2. When we light up the phone and leave us this error screen, press the power key + the Volume Down key to set the phone into download mode or (Download Mode).
3. Disable USB LG Driver Model, this will change depending on the operating system we have in the case of windows will be in Manage> Device Manager> Modems> LG USB Drive Model -> Right Click "Disable "
4. Open KDZ_FW select type 3GQCT, Phone Mode: DIAG, consider the room to install (File *. kdz).
Cannot flash any rom on my phone
Hey there, sorry if im spamming or doing any newbie thing, i've always try to stop that.
Recently i've try to get a rom on my phone but I've just got the kernel panic (blue error handler arm11 is crashed!!) I've had that before and solved it with no problems, but this time my computers or my brother's computer do not recognize the phone, not even after disabling the modem, and just when trying to flash a KDZ, this is what i get
[R&D Test Tools Log File]
02:56:37 : Launching SW update
02:56:37 : Unpacking KDZ
02:56:47 : KDZ file extraced
02:56:53 : Files were extracted.
02:56:53 : LGMobileDL Load.
02:56:53 : Port = -1
02:56:53 : Connecting to phone
02:56:54 : PHONE WAS NOT FOUND!
02:56:56 : ===FINISHED===
I don't know what can I do, tried with 2 computers, CS_emergency mode, 3 diferents rom, disabling the modem, but nothing! Even not in download mode.... Any suggestion?
As I said b4, sorry 4 spamming and 4 my english
if this happens (mine was bricked cant turn on no download mode no nothing) just send to lg get them to help you upgrade to 2.1 then try again
Is that the only thing left i could do? No way to try to fix it? I could send to the provider, but I don't know if there's a LG provider around, I may send it to "Movistar" (where i bought it)
---------- Post added at 10:03 AM ---------- Previous post was at 09:44 AM ----------
Whats just curious, is that my pc recognizes the phone, but the KDZ updater cannot! :/
like they say.
lg modem off in device manager.
switch-mode phone to downloding.
and try again. if youre phone die at 215, try with another soft
Or, delete ALL LG drivers, then restart ur PC, install them again, connect ur phone and flash in cs emergency... if doesn't, try another KDZ, or look for an out.kdz which could help, I've got about 7 arm crashed (kernel crash) and solved them that ways I just mentioned
Sent from my LG GT540 using XDA App
one trick about drivers is that you can try to connect it to the port you've never used before on your pc to connect your phone. It should then automaticly search and install drivers to recognize your phone
To all..
To fix this when I got this error you need to reflash a fastboot 2.1 and then go into fast boot and type the commands fastboot-w to wipe it then reboot into download mode and flash the normal stock rom
Same here :/ cant fix sending back to LG
Related
Hi i was updating my phone from Android 2.1 V20A to V20C
update finished when the phone reboots i got the error msg saying
Arm11 crashed
So tried to flash with emergency and cs_emergency mode but i am getting a error phone not found because of that flash process could not continue further..
try taking the battery out, sim card and memory card and flash it with all that out
@ eoghan2t7 : Thaks for ur response
I booted my phone to downloadmode (pressing Vol down + Power) then flashed using KDZ updater.. and now working
But the KDZ file which i used was ROM with FASTBOOT but i didnt tried with Orginal LG ROM. So i will check later and update here
Thanks
Guys,my phone shows Arm 11 crashed again on 2.1 without fastboot.
I go to the download mode and on kdz updater load kdz file and type on EMERGENCY,DIAG,CS_EMERGENCY and its say THE PHONE NOT FOUND!!!
How to fix this??
I tried to put Europe Open+Fastboot rom and its say again THE PHONE NOT FOUND!!!
EDIT:I fix it
HI,
I am writing after having spent days searching on the forum a way to fix it.
_
I've installed a custom rom (D01Mod) and it worked perfectly
I've rebooted my phone and then he is stuck on LG Logo.
Tested : KDZ with 20A00 and Out.KDZ
Driver: Ok
When i flash with KDZ once it reach " param = 215 " the phone has to reboot to finish the flash.
But when rebooting the flash didn't finish and the LG logo stay here. and when the LG logo aprear my computer don't "beep" like if a device was found.
what can i do ? (Don't forget KDZ won't finish..)
Thanx and sorry for my english
drastikz said:
HI,
I am writing after having spent days searching on the forum a way to fix it.
_
I've installed a custom rom (D01Mod) and it worked perfectly
I've rebooted my phone and then he is stuck on LG Logo.
Tested : KDZ with 20A00 and Out.KDZ
Driver: Ok
When i flash with KDZ once it reach " param = 215 " the phone has to reboot to finish the flash.
But when rebooting the flash didn't finish and the LG logo stay here. and when the LG logo aprear my computer don't "beep" like if a device was found.
what can i do ? (Don't forget KDZ won't finish..)
Thanx and sorry for my english
Click to expand...
Click to collapse
plug usb cable to back of PC then put phone to download mode (power+vol.down) go to device manager (right click on My Computer>Manage>Device manager>disable LGE modem)
reflash KDZ it should work
thanx for the reply
but i've already done it but KDZ won't continue. if i want him to continue, i have to unplug the phone turn it back to download mode and then it finish but when i reboot i'm still stuck
(PS: i'm on laptop)
try this
http://forum.xda-developers.com/showpost.php?p=12846002&postcount=23
and this
http://forum.xda-developers.com/showthread.php?t=810271
Hello guys, I have a problem with this phone.
First I flashed the euro+fastboot kdz... The phone booted and worked awesome but It wasn't showing recovery or LG logo.
Somewhere on this forum I read that you had to flash v10c and then v20B to fix this.
I did so, v10c failed, but v20B flashed correctly, but it didn't boot up.
I'm still stuck here, the phone is completely dark, but when I connect it to the pc I can see it with ADB, It just doesn't go into fastboot mode (because of v20B I guess). But flashing the euro kdz won't work anymore, and I'm stuck in ADB without fastboot.
Hope you guys can help me,
Juxter.
Juxter said:
Hello guys, I have a problem with this phone.
First I flashed the euro+fastboot kdz... The phone booted and worked awesome but It wasn't showing recovery or LG logo.
Somewhere on this forum I read that you had to flash v10c and then v20B to fix this.
I did so, v10c failed, but v20B flashed correctly, but it didn't boot up.
I'm still stuck here, the phone is completely dark, but when I connect it to the pc I can see it with ADB, It just doesn't go into fastboot mode (because of v20B I guess). But flashing the euro kdz won't work anymore, and I'm stuck in ADB without fastboot.
Hope you guys can help me,
Juxter.
Click to expand...
Click to collapse
Try again.
First refer to this thread:
dont see recovery and boot logo - http://forum.xda-developers.com/showthread.php?t=825173
And the original post by: Feuerbard
#22 - http://forum.xda-developers.com/showpost.php?p=9457010&postcount=22
Thumbs up solution to get logo
solution from 4PDA
flash first french firmware _hxxp://csmg.lgmobile.com:9002/swdata/WEBSW/GT540/ANEUBK/V20a_00/V20A_00.kdz
(you must make kdz flasher fullscreen and change right option to CS_EMERGENCY)
dont boot android , remove accu reinsert them and press vol - and plug usb cable into port on mainboard - you must get in download mode )
flash firmware with fastboot (i use CIS _hxxp://narod.ru/disk/26675062000/V20B_00.kdz.html)
boot android and flash this firmware _hxxp://narod.ru/disk/25473801000/out.kdz.html
after this you must see all logo ( LG , Motion LG , Android )
after this flash firmware you like (custom fastboot e t с)
maybe some point is not needed but this tutorial work 100% and tested by myself
Click to expand...
Click to collapse
And the post by namco:
in post -- #45 - http://forum.xda-developers.com/showpost.php?p=10241289&postcount=45
namco said:
So after 4 5 6 or maybe 10 times, it will finally become working, that's what you're saying?
This is really odd, something's wrong with these phones lol
Okay, i'll load myself with a ton of patience and repeat the steps as per the instructions. This is *exactly* how i am doing it, with all the details:
1) Using the French v20A ROM - http://csmg.lgmobile.com:9002/swdata/WEBSW/GT540/ANEUBK/V20a_00/V20A_00.kdz and this Russian one - http://narod.ru/disk/25473801000/out.kdz.html
2) Take out the battery, SIM card and SD card
3) While holding the Vol - button, plug USB into phone so that the phone goes into Download Mode
4) Run the KDZ Updater, put it into CS_Emergency mode
5) Select the French V20A rom and flash it
6) When it's finished (immediately after the DOWNLOAD MODE letters vanish), i pull out the USB plug from the PC, so that the phone doesn't boot.
7) Again hold Vol - and reinsert USB to put the phone back in Download Mode
8) In KDZ Updater (still in CS_Emergency mode) select out.kdz and flash it
9) Let the phone boot into Android
At this point i STILL don't have a boot animation, should i keep doing this until i see one appear?
When it (if) finally appears, i just flash my own ROM, do a factory reset and it should stay that way, correct?
I guess my impossibility to access recovery mode also has something to do with this...
Click to expand...
Click to collapse
Note: For above step: 1) Using the French v20A ROM
-- as long as you have the ROM of v20 with fastboot option, it doesn't really matter.
================
For out.kdz file alternate download link by fisher:
#59 - http://forum.xda-developers.com/showpost.php?p=10426771&postcount=59
Originally Posted by fishears
Try this:
http://www.mediafire.com/?u2mhgrbva8dr5cm
================
Hope this helps.
Thanks for the reply, I actually fixed it following this:
hxxp://modaco.com/topic/329863-how-to-raise-gt540-from-the-dead/
Once I got fastboot with that cwm.kdz I reflashed a fastboot rom, and from that one I could use the KDZ updater again, following the French kdz procedure...
The phone now is fully working recovery and bootanimations again
i installed cm 10.1 but gapps 10 and..
I have followed all the steps correctly. Now the reboot is complete and the screen is stuck at "unfortunately the process com.google.process.gapps has stopped" error. If I click okay I get another error "Unfortunately, setup wizard has stopped". Please help. this is urgent. i cant do anything on my phone now.
I tried with KDZ but usb debugging is not on and..
[R&D Test Tools Log File]
10:33:15 : Launching SW update
10:33:15 : Unpacking KDZ
10:33:53 : KDZ file extraced
10:34:07 : Files were extracted.
10:34:07 : LGMobileDL Load.
10:34:07 : Port = -1
10:34:07 : Connecting to phone
10:34:07 : PHONE WAS NOT FOUND!
10:34:09 : ===FINISHED===
I heard of a program "ADB" can enable USB Debugging with him?
please help me
AleexM said:
I tried with KDZ but usb debugging is not on and..
[R&D Test Tools Log File]
10:33:15 : Launching SW update
10:33:15 : Unpacking KDZ
10:33:53 : KDZ file extraced
10:34:07 : Files were extracted.
10:34:07 : LGMobileDL Load.
10:34:07 : Port = -1
10:34:07 : Connecting to phone
10:34:07 : PHONE WAS NOT FOUND!
10:34:09 : ===FINISHED===
I heard of a program "ADB" can enable USB Debugging with him?
please help me
Click to expand...
Click to collapse
If you want to flsh it via KDZ then just take out battery hold vol+ button and connect to USB. You will see yellow screen and then try to flash.
kristijan505 said:
If you want to flsh it via KDZ then just take out battery hold vol+ button and connect to USB. You will see yellow screen and then try to flash.
Click to expand...
Click to collapse
thanks man,but now the phone is blocked on lg logo when phone is starting :[
AleexM said:
thanks man,but now the phone is blocked on lg logo when phone is starting :[
Click to expand...
Click to collapse
go download mode, vol+ and - and plug in the usb cable which is already connected to your pc, and flash the kfz file
ps : you got this problem because i think you installed gapps from 4.1.2 and cm10.1 is 4.2.2, i did the same mistake
Sabyn said:
go download mode, vol+ and - and plug in the usb cable which is already connected to your pc, and flash the kfz file
ps : you got this problem because i think you installed gapps from 4.1.2 and cm10.1 is 4.2.2, i did the same mistake
Click to expand...
Click to collapse
i will try now,thanks
edit:solved.thanks Sabyn.
what is download mode and how do you get there?
eshantv said:
what is download mode and how do you get there?
Click to expand...
Click to collapse
try it with combo: vol + , vol - and power button
Hi everyone,
For some stupid reason a reset the file system i now I'm stuck in the LG logo.
1. I can enter in download mode - in Device manager the PC recognized as LGE AndroidNet USB Serial Port (41)
2. I can enter in recovery mode (Cyanogenmod recovery, which is very based) - in Device manager the PC recognized as Android ADB Interface
So far, so good. BUT. I'tried to flash the phone with LG FlashTool 2014 and i'm stuck at 2%. Ok, i was tried the fix with FixedDownloadcmode.bat, but when nothing is uploading on the phone (which by ADB is recognized as sideload when i'm in recovery mode and apply the ADB connection). I tried to push by ADB but nothing is uploading - error: protocol.......
LGUP recognized my phone as unknown, so this method is not working now.
Via ADB i can't send even TWRP recovery, which is so much flexible than cyanogenmod recovery.
I will be thankful for any help from your side.
Thank you in advance!
https://forum.xda-developers.com/lg-g2/general/alternative-fix-lg-flashtool-stuck-2-t3605753
Same happened to me. Try this if you can reach your storage
https://forum.xda-developers.com/showthread.php?t=2663369
https://www.youtube.com/watch?v=Lg693AYgoTo
ATT 4.4.2 KitKat:
https://mega.nz/#!n0RTUYZD!MVntiPxuyW...
ATT 4.2.2 JellyBean:
https://mega.nz/#!e5RERS4L!FjZyopcvwM...
T-Mobile 4.2.2 JellyBean:
https://mega.nz/#!qsRSBDwD!KKCETp41O1...
Modified DLL file if nothing else works:
https://mega.nz/#!f5xTGKrC!ifBCOAnK4j...
I had a very similar problem with it getting stuck at the logo after pushing supersu to the phone. I followed Supersport every single step of the way in his video. I think his links are the only valid ones online now, so just download them and reflash your phone. If your G2 is anything like mine, drivers will never appear to be installed correctly and it never restarts, only shuts down.
His method is:
1) Download and install LG drivers on PC
2) Download and install the flash tool and patch it
3) Download and load the .tot and .dll files into the flash tool
4) Enter download mode on G2 by holding volume up while connecting USB
5) Switch G2 Com port to 41 in device manager
6) Once Flash tool shows that all ports are ready, power down G2 and disconnect
7) Hold volume up and reconnect to get back into download mode
8) LG Flash tool starts flashing
9) Complete
Note: If your G2 was screwed up as bad as mine, it'll say failed but all the main system files will load to the device before it restarts and it'll even shut itself off while doing it's installation on first reboot. Mine somehow was still revived from this state with his method.
I forgot to add this but couldn't edit my post for some reason.
For D800:
Master archive of 5 files needed to do this:
https://www.androidfilehost.com/?fid=95747613655047114