Related
Hi guys,
Yesterday I updated to the new N9005XXUENA6 Leaked KitKat 4.4.2. Didn't really think much of it and finally decided to root the phone.
I rooted the phone with CF-Auto-Root thanks to chainfire. Anyway after that I installed CWM recovery as TWRP haven't really updated it since the new update for note 3.
Now i can get to the CWM recovery and after installing any rom
I tried
1. [JAN-13][hlte][1.2.4] AOSB Project (ProBAM ROM) - The End of The Line ! and then
2. [CM11][4.4.2][N9005][ROM][KERNEL][JAN13] temasek's UNOFFICIAL Build - V33
However, in both cases I get an error:
Kernel is not seandroid enforcing
set warranty bit: kernel
and keeps on boot looping.
I can get into download and recovery but cannot install any custom ROM's.
After a bit of looking around and what i gathered from similar questions,I tried installing a couple of kernels but still its a no go!.
Is it as a result of the new N9005XXUENA6 update? or me doing something idiotic?
P.S: Tried wiping data / factory reset, format partition / system, etc. Cannot find fix permissions in the new CWM however and cannot use TWRP as it just doesn't boot up into the recovery.
Thanks in advance.
Kratumay
kratumay said:
Hi guys,
Yesterday I updated to the new N9005XXUENA6 Leaked KitKat 4.4.2. Didn't really think much of it and finally decided to root the phone.
I rooted the phone with CF-Auto-Root thanks to chainfire. Anyway after that I installed CWM recovery as TWRP haven't really updated it since the new update for note 3.
Now i can get to the CWM recovery and after installing any rom
I tried
1. [JAN-13][hlte][1.2.4] AOSB Project (ProBAM ROM) - The End of The Line ! and then
2. [CM11][4.4.2][N9005][ROM][KERNEL][JAN13] temasek's UNOFFICIAL Build - V33
However, in both cases I get an error:
Kernel is not seandroid enforcing
set warranty bit: kernel
and keeps on boot looping.
I can get into download and recovery but cannot install any custom ROM's.
After a bit of looking around and what i gathered from similar questions,I tried installing a couple of kernels but still its a no go!.
Is it as a result of the new N9005XXUENA6 update? or me doing something idiotic?
P.S: Tried wiping data / factory reset, format partition / system, etc. Cannot find fix permissions in the new CWM however and cannot use TWRP as it just doesn't boot up into the recovery.
Thanks in advance.
Kratumay
Click to expand...
Click to collapse
if you are getting
Kernel is not seandroid enforcing
set warranty bit: kernel
on boot screen thats normal
try flash a rom then flash this straight after http://forum.xda-developers.com/showthread.php?t=2507403
should all work fine
jaythenut said:
if you are getting
Kernel is not seandroid enforcing
set warranty bit: kernel
on boot screen thats normal
try flash a rom then flash this straight after http://forum.xda-developers.com/showthread.php?t=2507403
should all work fine
Click to expand...
Click to collapse
Thanks for the reply,
So once again, I did a factory reset then flashed the rom and then flashed the file you recommended.
Still a no go
Same problem.
kratumay said:
Thanks for the reply,
So once again, I did a factory reset then flashed the rom and then flashed the file you recommended.
Still a no go
Same problem.
Click to expand...
Click to collapse
Based on what I read so far regarding the 4.4.2 update, if you flashed it on your device, there seems to be no way to go back to 4.3 ( I'm not sure if that means custom roms based on 4.3 as well ). Best thing to do is just flash the official 4.4.2 and hang in there until custom roms based on 4.4.2 comes out or people find a way to go back to 4.3. The reason the file from firasusman didn't work is probably because there might be difference in how kit kat deals with efs compared to jellybeans which it was written for in the first place.
Sent from my SM-N9005 using xda app-developers app
You probably are right as it doesn't really work. Anyway I'll keep waiting
Sent from my SM-N9005 using XDA Premium 4 mobile app
same here
Yip you won't be able to go to a lower bootloader than you are on with KK, CM based ROMs are currently running (MJ7) _ will have to wait until the new bootloader is implemented into new(er) builds.
Thanks for that info. Will keep an eye out. Cheers
Sent from my SM-N9005 using XDA Premium 4 mobile app
kratumay said:
Thanks for that info. Will keep an eye out. Cheers
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hi all,
I Have the same error " Recovery is not Seandroid Enforcing " but it's when I try to root my SM-N9005 with the procedure of the SM-9005 (My phone can't be rooted)
(true-android.blogspot.fr/2014/01/root-galaxy-note-3-sm-n9005-lte-running.html)
When I try to restart in recovery mode step 11 in the link :
(11 -Once flashing completed, your Galaxy Note 3 SM-N9005 will reboot. After the phone resets (it vibrates) IMMEDIATELY hold volume up and home buttons to boot into recovery mode. You can operate TWRP recovery using touch.)
This message appears : "Recovery is not Seandroid Enforcing ", and the phone restart, if I stop pushing button, i startup without rooted, If i Continue to push volume up and home buttons, it always boot with Recovery is not Seandroid Enforcing
Have you an idea ?
Thanks
tritri71 said:
Hi all,
I Have the same error " Recovery is not Seandroid Enforcing " but it's when I try to root my SM-N9005 with the procedure of the SM-9005 (My phone can't be rooted)
(true-android.blogspot.fr/2014/01/root-galaxy-note-3-sm-n9005-lte-running.html)
When I try to restart in recovery mode step 11 in the link :
(11 -Once flashing completed, your Galaxy Note 3 SM-N9005 will reboot. After the phone resets (it vibrates) IMMEDIATELY hold volume up and home buttons to boot into recovery mode. You can operate TWRP recovery using touch.)
This message appears : "Recovery is not Seandroid Enforcing ", and the phone restart, if I stop pushing button, i startup without rooted, If i Continue to push volume up and home buttons, it always boot with Recovery is not Seandroid Enforcing
Have you an idea ?
Thanks
Click to expand...
Click to collapse
Before you did this was your 4.4.2 on KitKat working well? Or did you come from 4.3? If you came from a correctly installed 4.4.2 then do go to this thread and start from STEP 8
http://forum.xda-developers.com/showthread.php?t=2614787
download the files required from STEP 8 onwards.
This is CWM recovery and not TWRP. I dont have experience with TWRP.
tritri71 said:
Hi all,
I Have the same error " Recovery is not Seandroid Enforcing " but it's when I try to root my SM-N9005 with the procedure of the SM-9005 (My phone can't be rooted)
(true-android.blogspot.fr/2014/01/root-galaxy-note-3-sm-n9005-lte-running.html)
When I try to restart in recovery mode step 11 in the link :
(11 -Once flashing completed, your Galaxy Note 3 SM-N9005 will reboot. After the phone resets (it vibrates) IMMEDIATELY hold volume up and home buttons to boot into recovery mode. You can operate TWRP recovery using touch.)
This message appears : "Recovery is not Seandroid Enforcing ", and the phone restart, if I stop pushing button, i startup without rooted, If i Continue to push volume up and home buttons, it always boot with Recovery is not Seandroid Enforcing
Have you an idea ?
Thanks
Click to expand...
Click to collapse
I'm assuming you're on 4.3, you have to use this in pda/ap on odin. After flashing phone will restart with android and texts in color. After that it will reboot again to system and you will have root. SEandroid Enforcing is normal if you're rooting you're device. Have you checked with root checker if you have root? Also, once you root your device you will have to flash a custom recovery like cwm or twrp to be able to boot to those recovery.
Hakired said:
Before you did this was your 4.4.2 on KitKat working well? Or did you come from 4.3? If you came from a correctly installed 4.4.2 then do go to this thread and start from STEP 8
http://forum.xda-developers.com/showthread.php?t=2614787
download the files required from STEP 8 onwards.
This is CWM recovery and not TWRP. I dont have experience with TWRP.
Click to expand...
Click to collapse
Thanks a lot !
It Works !
tritri71 said:
Thanks a lot !
It Works !
Click to expand...
Click to collapse
Awesome enjoy kitkat
n9005 cm11 20140226 problems
yesterday i installed cm11 nightly 20140226 on my n9005 via twrp 2.6.3.7 (before i have had 4.3)
it all works fine except 2 little problems:
1. whenever i plug the charger or usb cable to computer, the phone is turned on automatically without pushing the power button.
2. my time & date settings can't be saved, and each time on turning on it goes back to 2013 and 12:00
Thanks in advance to all answers
Same problem
I got the same problem. I have Bobcat 4.3 installed and i'm trying to install Omegarom 4.4.2 but I get stuck in bootloop with '' Kernel is not Seandroid Enforcing ''
Kjetilz said:
I got the same problem. I have Bobcat 4.3 installed and i'm trying to install Omegarom 4.4.2 but I get stuck in bootloop with '' Kernel is not Seandroid Enforcing ''
Click to expand...
Click to collapse
First you will have to update to stock 4.4.2 then you can flash any 4.4.2 roms.
Need some help.Newbie here. I just recently bought a samsung n3 tmobile n900t. I wanted to flash an international ROM to remove those tmobile apps (since im using a different carrier) So I found this ROM here http://forum.xda-developers.com/showthread.php?t=2518249
Installed CWM and flashed the rom. Now i'm in the Kernel is not seandroid enforcing set warranty: kernel loop. What should I do to fix this?
Mediaspot said:
Need some help.Newbie here. I just recently bought a samsung n3 tmobile n900t. I wanted to flash an international ROM to remove those tmobile apps (since im using a different carrier) So I found this ROM here http://forum.xda-developers.com/showthread.php?t=2518249
Installed CWM and flashed the rom. Now i'm in the Kernel is not seandroid enforcing set warranty: kernel loop. What should I do to fix this?
Click to expand...
Click to collapse
The rom you flashed is based on android 4.3, if the phone you bought already have 4.4 then that is probably the cause of the loop. Flash another rom based on 4.4 or download stock firmware from sammobile and flash using odin.
hey_joe said:
The rom you flashed is based on android 4.3, if the phone you bought already have 4.4 then that is probably the cause of the loop. Flash another rom based on 4.4 or download stock firmware from sammobile and flash using odin.
Click to expand...
Click to collapse
I just tried flashing this rom but the same thing. http://forum.xda-developers.com/showthread.php?t=2671039 will try to look for stock firmware and be back with results
I am getting same error but after that phone boots up fine
Hi, I just have a quick question, I have the European Unlocked i9505 which is now rooted and has Philz recovery installed, apart from that it is stock (never had cutom rom installed). I want to put it back to 100% stock, so I was going to use triangle away first of all to reset the knox counter, before un-rooting.
My question is once I have reset the counter, when using Kies to update the phone, do I have to un-root and install stock recovery prior to doing an update through Kies or will the Kies update and reset everything automatically, i.e. will it install stock recovery and remove Root on its own..?
Kies is already saying there is an update ready for the phone, but I don't want to anything until I've checked first..?
Cheers for any advice
Check for your Knox counter in download mode. If it is tripped then you wont get OTA or Kies updates.If u want to get on full stock with stock recovery then u ll hav to flash official firmware from samfirmware through Odin. And last upto my knowledge Triangle away wont reset your Knox counter.
Sent from my OCTA CORE I9500
Mandark52 said:
Check for your Knox counter in download mode. If it is tripped then you wont get OTA or Kies updates.If u want to get on full stock with stock recovery then u ll hav to flash official firmware from samfirmware through Odin. And last upto my knowledge Triangle away wont reset your Knox counter.
Sent from my OCTA CORE I9500
Click to expand...
Click to collapse
Hi,
I'm confused then, because Kies says that there is an update when the phone is connected via usb..?
In download mode the phone says:
Product Name: i9505
Current Binary: Custom
System Status: Custom
Knox Kernal Lock: 0x0
Knox Warranty Void: 0x1
CSB-CONFIG-LSB: 0x30
Write Protection: Enable
eMMC Burst Mode: Enabled
And Triangle Away reports 'Current Status' as:
Counter: 5
Binary: Custom
Device: GT-i9505
System: Modified
So, surely Keis shouldn't offer an update because KNOX Void Warranty 0×1 and System is Modified or am I missing something..??
Your missing something...
theunderling said:
Your missing something...
Click to expand...
Click to collapse
And that is..?
Main Mic Not Working
I'm having a problem with my i9505.
I think my main mic is not working anymore because people can't hear me on regular call but when I switch it to speaker mode the second mic works fine.
I've flashed and reset my phone. And changed the microphone unit including charging port and nothing changed.
what do you suggest me to do?
have you faced such problem with S4?
It is incorrect to say that you won't get an ota with Knox tripped because I had one last week.
Use TA to reset counter then use Odin to flash the latest Stock Rom as identified by Sammoblie. You'll then be official status and the next ota will come automatically
Sent from my GT-I9505 using Tapatalk
Painman1963 said:
It is incorrect to say that you won't get an ota with Knox tripped because I had one last week.
Use TA to reset counter then use Odin to flash the latest Stock Rom as identified by Sammoblie. You'll then be official status and the next ota will come automatically
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
If u are on custom recovery you wont get OTA/ kies updates. This is what I ve read.
topcat888 said:
Hi, I just have a quick question, I have the European Unlocked i9505 which is now rooted and has Philz recovery installed, apart from that it is stock (never had cutom rom installed). I want to put it back to 100% stock, so I was going to use triangle away first of all to reset the knox counter, before un-rooting.
My question is once I have reset the counter, when using Kies to update the phone, do I have to un-root and install stock recovery prior to doing an update through Kies or will the Kies update and reset everything automatically, i.e. will it install stock recovery and remove Root on its own..?
Kies is already saying there is an update ready for the phone, but I don't want to anything until I've checked first..?
Cheers for any advice
Click to expand...
Click to collapse
1. If u update ur phone via KIES it update and reset everything less your KNOX. This mean u will have KNOX 0x1 (void warranty) anyway, ur root will dissapear and ur CUSTOM RECOVERY will be replaced for the STOCK RECOVERY
2. If u have rooted ur phone u can install the updates via KIES. You can DOWNLOAD the updates via OTA too, but for install them u have to go STOCK RECOVERY
3. Steps:
- Use Triangle Away and reset ur flash counter for get Official state
- Go to Kies 3 and update ur phone
- Root it and install custom recovery again when finish the process
- Enjoy
Joku1981 said:
1. If u update ur phone via KIES it update and reset everything less your KNOX. This mean u will have KNOX 0x1 (void warranty) anyway, ur root will dissapear and ur CUSTOM RECOVERY will be replaced for the STOCK RECOVERY
2. If u have rooted ur phone u can install the updates via KIES. You can DOWNLOAD the updates via OTA too, but for install them u have to go STOCK RECOVERY
3. Steps:
- Use Triangle Away and reset ur counter for get Official state
- Go to Kies 3 and update ur phone
- Root it and install custom recovery again when finish the process
- Enjoy
Click to expand...
Click to collapse
This is also an accurate way to upate your phone.
However, I have just reread the OP and you are talking about resetting the Knox Counter. This is not possible at present
Sent from my GT-I9505 using Tapatalk
Painman1963 said:
This is also an accurate way to upate your phone.
However, I have just reread the OP and you are talking about resetting the Knox Counter. This is not possible at present
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
Confused, TA supports and will reset the i9505..?
topcat888 said:
Confused, TA supports and will reset the i9505..?
Click to expand...
Click to collapse
It will reset the flash counter but not the Knox counter
Sent from my GT-I9505 using Tapatalk
Painman1963 said:
It will reset the flash counter but not the Knox counter
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
Ah I see, and it's the flash counter that lets you or stops you downloading OTA updates..?
topcat888 said:
Ah I see, and it's the flash counter that lets you or stops you downloading OTA updates..?
Click to expand...
Click to collapse
It's the modified status and/or a custom recovery
Sent from my GT-I9505 using Tapatalk
Painman1963 said:
It's the modified status and/or a custom recovery
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
And it's the modified status will be reset with Triangle Away..?
Painman1963 said:
It's the modified status and/or a custom recovery
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
custom recovery will stop Ota updates.
Sent from my OCTA CORE I9500
Mandark52 said:
custom recovery will stop Ota updates.
Sent from my OCTA CORE I9500
Click to expand...
Click to collapse
That's what I said. Along with custom recovery
Sent from my GT-I9505 using Tapatalk
Joku1981 said:
1. If u update ur phone via KIES it update and reset everything less your KNOX. This mean u will have KNOX 0x1 (void warranty) anyway, ur root will dissapear and ur CUSTOM RECOVERY will be replaced for the STOCK RECOVERY
2. If u have rooted ur phone u can install the updates via KIES. You can DOWNLOAD the updates via OTA too, but for install them u have to go STOCK RECOVERY
3. Steps:
- Use Triangle Away and reset ur flash counter for get Official state
- Go to Kies 3 and update ur phone
- Root it and install custom recovery again when finish the process
- Enjoy
Click to expand...
Click to collapse
Sorry to keep asking questions, I have done Triangle Away now and the counter is 0 and it is official...
So, do I now have to do a 'Full Unroot' using SuperSU before using Kies to update..?
Or is that step not required, shall I just let Keis do its thing and the update will wipe everything including Root and recovery..??
Or is it better to use Odin to flash the I9505XXUEMKF firmware I have downloaded already..?
Basically, I just want the easiest way to get back to stock...
Thanks again
topcat888 said:
Sorry to keep asking questions, I have done Triangle Away now and the counter is 0 and it is official...
So, do I now have to do a 'Full Unroot' using SuperSU before using Kies to update..?
Or is that step not required, shall I just let Keis do its thing and the update will wipe everything including Root and recovery..??
Or is it better to use Odin to flash the I9505XXUEMKF firmware I have downloaded already..?
Basically, I just want the easiest way to get back to stock...
Thanks again
Click to expand...
Click to collapse
Flash through Odin directly no need to unroot. As you are flashing stock it will automatically clear the root. Just follow the correct steps for flashing. All the best.
Mandark52 said:
Flash through Odin directly no need to unroot. As you are flashing stock it will automatically clear the root. Just follow the correct steps for flashing. All the best.
Click to expand...
Click to collapse
All done, flashed back to stock BUT one thing I don't understand is that under Settings/More/About Device/Status it states
that the Device Status is still Custom not Official, why would that be.?? because of Knox Warranty Void being 0x1..??
Hey guys, i will go direct into topic
i have note 2 n7100
1- i made a factory reset from settings menu on phone then the mobile didn't load again (stuck into logo)
2- tried all recovery ROM with all methods and no luck.
3- Downloaded and installed official ROM from SAMMOBILE and the mobile loaded and worked.
4- Installed a custom ROM.
5- Made a wipe to go back for the official ROM again and starting from here everything went bad..
my mobile didn't accept any ROMS, recovery or anything.
just rebooted and stuck on Samsung logo
i tried many things for 3 days but no luck.
Please HELP.
-----
-----
EDIT:
i know that wiping from recovery mode might solve the problem ,, but i don't have access to recovery mode. i have access to download mode. and sure i tried MANY times to flash recovery roms with ODIN and no luck.
Which rom u r using nd which method ... Cwm 6.04. ???
Sent from my GT-N7100 using Tapatalk
sufiyankatra said:
Which rom u r using nd which method ... Cwm 6.04. ???
Sent from my GT-N7100 using Tapatalk
Click to expand...
Click to collapse
rom of what ?
CWM is a recovery and i said that all of recovery roms were failed.
probably you have enabled knox, just flash official firmware again
Enviado do meu GT-N7100 através de Tapatalk
monteiro-ribas said:
probably you have enabled knox, just flash official firmware again
Enviado do meu GT-N7100 através de Tapatalk
Click to expand...
Click to collapse
I did, the same one which worked before..
but it turned to the same result.
stuck with Samsung logo
siimoz said:
I did, the same one which worked before..
but it turned to the same result.
stuck with Samsung logo
Click to expand...
Click to collapse
Have you tried booting into recovery and performing a full data wipe from there? Including (internal) SDCard?
EmptyArea said:
Have you tried booting into recovery and performing a full data wipe from there? Including (internal) SDCard?
Click to expand...
Click to collapse
There's no recovery enabled
i tried to flash (philz , twrp2 and cmw 2 ) none of them is booting.
So we know what bootloader you have, what does it say (in the top left) when you're in download mode?
#Also, you should ask for this thread to be moved to Q&A
EmptyArea said:
So we know what bootloader you have, what does it say (in the top left) when you're in download mode?
#Also, you should ask for this thread to be moved to Q&A
Click to expand...
Click to collapse
here it is:
ODIN MODE
Product name: GT-N7100
CUSTOM BINARY DOWNLOAD: YES (12 COUNTS)
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
KNOX WARRANTY VOID: 1
RP SWREV: A2
So you're on a 4.3+ bootloader, I haven't looked into that much - I'm assuming you can downgrade and have a custom recovery, but I'm not sure on the procedure. (Although i imagine Knox Warranty is irreversible - not like that matters because you would simply say: "I've got know idea what that [KNOX] is" and "My phone must have come like that."
It would not be the first time someone has opened a phone to find the software in a peculiar state!)
Either way you should be able to install and 4.3 stock rom and get stock recovery back.
Perhaps it's your odin and OS setup. Try flashing a few different versions of recovery, on different PCs*, with different cables and different versions of odin. If that doesnt work try the same with different stock ROMs. It's what I'd try whilst seeking more expert advice.
*if on Win7 try running odin 'as Windows XP'
Also see here:
http://techbeasts.com/2014/01/17/how-to-deknox-samsung-galaxy-s3-s4-note-2-note-3/
EmptyArea said:
So you're on a 4.3+ bootloader, I haven't looked into that much - I'm assuming you can downgrade and have a custom recovery, but I'm not sure on the procedure. (Although i imagine Knox Warranty is irreversible - not like that matters because you would simply say: "I've got know idea what that [KNOX] is" and "My phone must have come like that."
It would not be the first time someone has opened a phone to find the software in a peculiar state!)
Either way you should be able to install and 4.3 stock rom and get stock recovery back.
Perhaps it's your odin and OS setup. Try flashing a few different versions of recovery, on different PCs*, with different cables and different versions of odin. If that doesnt work try the same with different stock ROMs. It's what I'd try whilst seeking more expert advice.
*if on Win7 try running odin 'as Windows XP'
Also see here:
http://techbeasts.com/2014/01/17/how-to-deknox-samsung-galaxy-s3-s4-note-2-note-3/
Click to expand...
Click to collapse
Thank you for your help, i am downloading a different stock ROM now.
but can you please tell me more about that downgrading thing?
I'm not too sure I'm afraid.
My objective, if I were you, get a custom recovery working and install Wamrick's NC3 - stock kernel will work for you as your bootloader is 4.3 and I don't think you can downgrade that due to Knox.
EmptyArea said:
I'm not too sure I'm afraid.
My objective, if I were you, get a custom recovery working and install Wamrick's NC3 - stock kernel will work for you as your bootloader is 4.3 and I don't think you can downgrade that due to Knox.
Click to expand...
Click to collapse
still.. i don't know how to make the Custom recovery work! as you see in the boot loader i tried to flash 12 times and nothing happened.
And you've tried flashing a full stock 4.3 rom from Sammobile right? Running odin as win XP (if on 7)
hey guyz..i hav a problem with my s4 GT-i9505 (jfltexx)..whenever i install a rom it is installed completely..when i start mobile and after logo when it asks for language as soon as i select it..it turns the screen off..some times it only shows the time nd stuck there..nothing works any button or touch..bt mtp works..i hav tried atleast 10 roms nd same problem exists..any suggestions?? i am using philz touch recovery(latest one dont remember the version)..i also tried TWRP bt same problem..nd my bootloader is XXUHOF2..plz help me..i am currently on cyanogen 10.2(4.2.2) nd cant intall any other rom..bt i made backup of this rom nd whenever i restores it it works like charm..plz help me..i am open to suggestions..
fahadashiq said:
hey guyz..i hav a problem with my s4 GT-i9505 (jfltexx)..whenever i install a rom it is installed completely..when i start mobile and after logo when it asks for language as soon as i select it..it turns the screen off..some times it only shows the time nd stuck there..nothing works any button or touch..bt mtp works..i hav tried atleast 10 roms nd same problem exists..any suggestions?? i am using philz touch recovery(latest one dont remember the version)..i also tried TWRP bt same problem..nd my bootloader is XXUHOF2..plz help me..i am currently on cyanogen 10.2(4.2.2) nd cant intall any other rom..bt i made backup of this rom nd whenever i restores it it works like charm..plz help me..i am open to suggestions..
Click to expand...
Click to collapse
If you know how Odin works, then flash latest stock rom with .pit and re-partition.
Then only use the latest TWRP. The rest is outdated.
Lennyz1988 said:
If you know how Odin works, then flash latest stock rom with .pit and re-partition.
Then only use the latest TWRP. The rest is outdated.
Click to expand...
Click to collapse
i tried repartioning nd stock rom thorough odin..same problem..
any solution??
fahadashiq said:
any solution??
Click to expand...
Click to collapse
- What does it say your model is when booted into download mode? What version of TWRP are you using?
- The roms should just work with TWRP. Try flashing the rom in my signature.
Lennyz1988 said:
- What does it say your model is when booted into download mode? What version of TWRP are you using?
- The roms should just work with TWRP. Try flashing the rom in my signature.
Click to expand...
Click to collapse
TWRP 2.8.7.0..it says
Product name : gt-i9505
Current binary : Custom
System Status : Custom
knox kernel Lock : 0*0
knox warranty void : 0*1
CSB-CONFIG-LSB : 0*30
Write protection : Enable
eMMC burst mode : enabled..
in downloading mode..
fahadashiq said:
TWRP 2.8.7.0..it says
Product name : gt-i9505
Current binary : Custom
System Status : Custom
knox kernel Lock : 0*0
knox warranty void : 0*1
CSB-CONFIG-LSB : 0*30
Write protection : Enable
eMMC burst mode : enabled..
in downloading mode..
Click to expand...
Click to collapse
Really strange. Can you try a different battery?
Try re-partion and flash stock rom
Sent from my GT-I9505 using Tapatalk
@yahya wessam: Look at post 3. The OP already tried that and it didn't work.
@OP: Have you tried a different cable?
yahya wessam said:
Try re-partion and flash stock rom
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
i tried..same problem..stuck after booting..
OK guys,
well after i updated to new lolipop via kies i didn't like it so i downgraded again to kitkat 4.4.4. Now its been almost 2 weeks trying everything i know and can to root my phone again but so far i can not .
i used CF-Auto-Root-a7lte-a7ltexx-sma700fd with base "A700FDXXU1AOA2_HOME.tar" all via odin and still won't work everytime i try to root i get this stupid error "Recovery is not Seandroid Enforcing set | warrnty bit: recovery"
i tried everything wipe date-hard factory reset .... everything it just won't get done -_->
so i tried kingroot and now boom it worked BUT i want to install SuperSu and it won't install bianry i tried everything from supersu me to terminal console trick and still won't get done and i need SuperSu coz i like it more and it works better with Lucky Patcher plus i already got it premium XD
so what did i do wrong? why i can't root it and get this stupid error ?
P.S
1-in odin mode there is this blue text 'Secure download on "
2-could this all relate to knox some how ?
"Recovery is not Seandroid Enforcing set warranty bit: recovery" is not an error, its a warning and means nothing.
When downgrading to kitkat you need to wipe the data partition.
Flash the stock firmware, wipe the Data partiton, boot to android (10mins), reboot to download mode, flash cfautoroot.
If cfautoroot doesn't work flash TWRP then flash Supersu.
ashyx said:
"Recovery is not Seandroid Enforcing set warranty bit: recovery" is not an error, its a warning and means nothing.
When downgrading to kitkat you need to wipe the data partition.
Flash the stock firmware, wipe the Data partiton, boot to android (10mins), reboot to download mode, flash cfautoroot.
If cfautoroot doesn't work flash TWRP then flash Supersu.
Click to expand...
Click to collapse
u mean installing CF-Auto-Root-a7lte-a7ltexx-sma700fd via Odin again but after re-install the firmware and wipe data partition?
also why would i tried to flash TWRP before and it caused the phone to freez in samsung logo with same error ""Recovery is not Seandroid Enforcing set warranty bit: recovery""
?
OnMission said:
flash cfautoroot? u mean installin it via Odin ? and can i have link for it please ?
also why would i tried to flash TWRP before and it caused the phone to freez in samsung logo with same error ""Recovery is not Seandroid Enforcing set warranty bit: recovery""
?
Click to expand...
Click to collapse
You already have it: CF-Auto-Root-a7lte-a7ltexx-sma700fd
Are you sure you used the correct TWRP?
ashyx said:
You already have it: CF-Auto-Root-a7lte-a7ltexx-sma700fd
Are you sure you used the correct TWRP?
Click to expand...
Click to collapse
i don't know ? how can i till ? i clicked on vol up +home button+lock button and open recovery mode ( before trying TWRP)
OnMission said:
i don't know ? how can i till ? i clicked on vol up +home button+lock button and open recovery mode ( before trying TWRP)
Click to expand...
Click to collapse
Which TWRP did you flash -link?
ashyx said:
Which TWRP did you flash -link?
Click to expand...
Click to collapse
this one here
http://forum.xda-developers.com/android/development/recovery-galaxy-a7-t3085266
OnMission said:
this one here
http://forum.xda-developers.com/android/development/recovery-galaxy-a7-t3085266
Click to expand...
Click to collapse
I don't think that is for your device.
This one is t700fd: http://forum.xda-developers.com/showthread.php?t=3253126
ashyx said:
I don't think that is for your device.
This one is t700fd: http://forum.xda-developers.com/showthread.php?t=3253126
Click to expand...
Click to collapse
i tried it all again and it worked like charm i flashed using same link verion i posted above and it worked
after hard reset>flash frimware>using odin to root it worked i think the problem was in the frimware i used
thanks guys for helping out
how did u downgrade from 5.0.1 to 4.4.4. pls explain in detail