Xperia Z5 -> Three UK VOLTE - Xperia Z5 General

Now that Three UK has officially declared support for 800Mhz VOLTE on the Xperia Z5 I was wondering if anybody tried connecting to 800Mhz frequency.
I have got a EE sourced Z5 and I wonder whether it will connect to 800Mhz if I fash it with Three software.

If you flash it, possibly. There's no harm in flashing to find out and flashing back if you aren't satisfied.

sovanyio said:
If you flash it, possibly. There's no harm in flashing to find out and flashing back if you aren't satisfied.
Click to expand...
Click to collapse
no change..
It keeps connecting to H+ and occasionallt 0 to 1 bar of 4G.

olisun39 said:
no change..
It keeps connecting to H+ and occasionallt 0 to 1 bar of 4G.
Click to expand...
Click to collapse
Sounds like you're just in a bad coverage area, but there might be a certificate required for VoLTE on 3 that isn't on the EE firmware, not sure how its implemented outside of the US

sovanyio said:
Sounds like you're just in a bad coverage area, but there might be a certificate required for VoLTE on 3 that isn't on the EE firmware, not sure how its implemented outside of the US
Click to expand...
Click to collapse
I installed the Three firmware but I haven't done a factory reset as yet.

olisun39 said:
I installed the Three firmware but I haven't done a factory reset as yet.
Click to expand...
Click to collapse
I don't know why you would need a factory data reset. But if you want to go ahead

Your phone should connect to the best band provided by your network by default, I don't think it's going to matter what European firmware you use. If you are on Three I would flash the Three firmware anyway so you can use VOLTE when it comes out.

jeremy_inc said:
Your phone should connect to the best band provided by your network by default, I don't think it's going to matter what European firmware you use. If you are on Three I would flash the Three firmware anyway so you can use VOLTE when it comes out.
Click to expand...
Click to collapse
Looks like the update is arriving in mid December even though the website says otherwise.

olisun39 said:
Looks like the update is arriving in mid December even though the website says otherwise.
Click to expand...
Click to collapse
I did a reset of my phone last night and today I noticed I can connect to the 800Mhz and actually use it.
I don't have VOLTE but it works as a data network
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

You got a link of the three firmware?

Im after flashing this 3 firmware i have flashed a z3 before but that was a tff file and real easy to do. I have downloaded the flashtool and firmware but struggling with this

chrisully said:
Im after flashing this 3 firmware i have flashed a z3 before but that was a tff file and real easy to do. I have downloaded the flashtool and firmware but struggling with this
Click to expand...
Click to collapse
Use the flashtool to automatically download the firmware for you.
It downloads and prepares the files for you to flash your Z5.

olisun39 said:
Use the flashtool to automatically download the firmware for you.
It downloads and prepares the files for you to flash your Z5.
Click to expand...
Click to collapse
I'm on Windows 10 and says drivers and not installed for fastboot grr

chrisully said:
I'm on Windows 10 and says drivers and not installed for fastboot grr
Click to expand...
Click to collapse
Search for Flashtool-drivers-1.5-20140318.exe.
I think it's available in this forum somewhere.

olisun39 said:
Search for Flashtool-drivers-1.5-20140318.exe.
I think it's available in this forum somewhere.
Click to expand...
Click to collapse
just realised needed to disable driver signature on windows 10 duu my bad flashing now. Thanks for the help though

Flashed now and working fine not factory reset. Updates will be from three now?

chrisully said:
Updates will be from three now?
Click to expand...
Click to collapse
That's the gist of it, yeah. You've just flashed your phone with the 3 customisation so that's who updates need to come through.

Cool thanks again ?

chrisully said:
Flashed now and working fine not factory reset. Updates will be from three now?
Click to expand...
Click to collapse
You will have to factory reset your phone because you will get a small system update from Three, which I think enables the 800Mhz network.
Not sure if it supports VOLTE but my phone doesn't show the VOLTE arrows but I have made calls while on 4G.
Or you can try to connect to the 800Mhz 4G network by going to a area where the 1800Mhz 4G signal is weaker.

I have factory reset now but got no update as of yet
---------- Post added at 12:02 PM ---------- Previous post was at 11:51 AM ----------
olisun39 said:
You will have to factory reset your phone because you will get a small system update from Three, which I think enables the 800Mhz network.
Not sure if it supports VOLTE but my phone doesn't show the VOLTE arrows but I have made calls while on 4G.
Or you can try to connect to the 800Mhz 4G network by going to a area where the 1800Mhz 4G signal is weaker.
Click to expand...
Click to collapse
https://onedrive.live.com/redir?resid=43164BBA4C2CE0BE!2704&authkey=!APEROTP7hRm2yjw&v=3&ithint=photo%2cpng

Related

No Data on Unlocked G2?

I recently bought an unlocked LG G2 VS980 from amazon and I'm on ATT. I put my card in and I have basic service such as calling and texting but I have no data what so ever. I believe I have all the correct ATT apn settings but if you have any helpful information tell me. I'll be okay with just 3g. I'm on Blisspop running 5.1.1.
EDIT: It seems I've made matters worse as on the APN settings, I've selected to reset to default, then later I moved my sim back to my old phone. When I turn on the device again with my sim in I am greeted with no service what so ever and in the APN settings "Access Point Name settings are not available for this user"
Did data work on the stock rom?
audit13 said:
Did data work on the stock rom?
Click to expand...
Click to collapse
Right when I got the device I went straight to rooting it and putting lollipop on it so I didn't get the chance to see it work. But in this video it seems to have worked
https://www.youtube.com/watch?v=Ry6_G4ycc-c
Could it really be the rom?
Also I got the apn setting back but none of the att settings get me any data. No 3g or edge.
I checked my sim status and it recognizes I'm on ATT, Mobile network type HSPA, In service, but on Mobile network state it says its disconnected.
Gerard897 said:
Right when I got the device I went straight to rooting it and putting lollipop on it so I didn't get the chance to see it work. But in this video it seems to have worked
https://www.youtube.com/watch?v=Ry6_G4ycc-c
Could it really be the rom?
Also I got the apn setting back but none of the att settings get me any data. No 3g or edge.
I checked my sim status and it recognizes I'm on ATT, Mobile network type HSPA, In service, but on Mobile network state it says its disconnected.
Click to expand...
Click to collapse
It could possibly be an incorrect apn or it could be an incompatiable boot stack. Did you flash the boot stack your self or did blisspop flash one?
Sent from my LG-D802 using Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
These are the apn settings that came by default. As for the bootstack I got the loki one for VS980. "bootstack-vs980-LP_39a-loki-signed.zip" Also in this video
https://www.youtube.com/watch?v=5Ro4bTMRQ0w
In the comments, the uploader says this "Yeah it may not work on the g2 anymore with Verizon as the baseband changes between the two." to a person trying to get data on lollipop also. Any thoughts? Can you change the baseband back while keeping lollipop?
Bump
Gerard897 said:
Bump
Click to expand...
Click to collapse
Sorry for the delay man. Im out and about atm but when i get i. I will look at the blisspop download and see if it has a different bootstack with it. It doesnt make sense to me that the lollipop update would remove functionality of the devices compatiable frequencys without hindering the frequencys verizion use themselves. In the meantime make sure your apn settings look like this https://apn.gishan.net/settings/37_4_att_apn_settings_for_lg_g2x.php
Sent from my LG-D802 using Tapatalk
---------- Post added at 01:42 PM ---------- Previous post was at 01:07 PM ----------
Also while i think of it can you check what frequency bands at&t run on in your area as the verizon model onky runs on two of the four bands that the at&t lg g2 does. Its possible that your area doesnt run the bands the vs980 needs.
Sent from my LG-D802 using Tapatalk
I've checked the rom and it doesnt flash any boot stacks but i found a post here saying that the users updated to the kitkat bootloader and the lollipop modems etc that use bump and not loki so you could try to do the same. follow the steps in this comment here
So I just follow the instructions about the bootstack? I don't have to flash any additional modems? Since I already have blisspop, do I need to wipe then flash?
Edit: I just flashed the 39a bootstack and nothing changed really. I still don't get data but still receive texts and calls. As for the bands, if I get calls and texts I shouldn't I at least get 3g or hspa? Any more help?
Gerard897 said:
So I just follow the instructions about the bootstack? I don't have to flash any additional modems? Since I already have blisspop, do I need to wipe then flash?
Edit: I just flashed the 39a bootstack and nothing changed really. I still don't get data but still receive texts and calls. As for the bands, if I get calls and texts I shouldn't I at least get 3g or hspa? Any more help?
Click to expand...
Click to collapse
Not necessarily, the calls/texts is on a different frequency to the data reception. You can check easily enough, if you look at coverage plans from at&t for where you live it should state their active frequencys. If the bootstack flash failed to help then its either not in the correct frequency, the apn is somehow misconfigured, the rom is bugged or the phone is damaged. You could make a backup and then flash a stock kitkat rom if it turns out your frequency is all good. But other than that im not sure what to suggest pal.
Sent from my LG-D802 using Tapatalk

LG G4 international UPDATE

Guys i just recieved new update for my G4 international after 6 months ... So far its good and i notice that phone generates less heat .. It is v20g and July patch
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Same for me
Has anyone tried installing over root and xposed?
I guess I'll try it and report back.
Update: Doesn't work with root.
http://i.imgur.com/prap3EG.png
Same here. Romanian version.
Sent from my LG-H815 using Tapatalk
English screenshot: http://i.imgur.com/boZhseN.png
I am still waiting...
For me nothig yet.
Supertras said:
I am still waiting...
Click to expand...
Click to collapse
You could have always got the official v20d marshmallow that was posted on XDA.
htr5 said:
You could have always got the official v20d marshmallow that was posted on XDA.
Click to expand...
Click to collapse
I know but I didn't had the time and the necessary resources to do it . I was also a Little afraid for the bootloop problem.
Supertras said:
I know but I didn't had the time and the necessary resources to do it . I was also a Little afraid for the bootloop problem.
Click to expand...
Click to collapse
Not sure if you know about it, but your phone is basically showpiece from showrooms or shops, that's the X in your version number. This kind of phones are not intended to be sold for customers.
You will never got more updates as you already have, so your only option is to flash it manually.
Bootloop problem is not dependant on software version. It doesn't matter if you have 5.1 or 6.0.
src151 said:
Not sure if you know about it, but your phone is basically showpiece from showrooms or shops, that's the X in your version number. This kind of phones are not intended to be sold for customers.
You will never got more updates as you already have, so your only option is to flash it manually.
Bootloop problem is not dependant on software version. It doesn't matter if you have 5.1 or 6.0.
Click to expand...
Click to collapse
Do you have an accurate source to backup your wild claims?
My EU (UK) H815 v20d-EUR-XX is currently downloading the update.
No need for a manual flash and my device certainly was not a store demo model.
Hello,
My G4 is unlocked and ROOTED and the update is available and in downloading atm.
There are something I should to know about the fact that my smartphone ROOTED evening before applying the update?
Could this affect my G4?
Thank you! =D
Supertras said:
I know but I didn't had the time and the necessary resources to do it . I was also a Little afraid for the bootloop problem.
Click to expand...
Click to collapse
OllieD said:
Do you have an accurate source to backup your wild claims?
My EU (UK) H815 v20d-EUR-XX is currently downloading the update.
No need for a manual flash and my device certainly was not a store demo model.
Click to expand...
Click to collapse
Sure,
We are not talking about the same thing.
Look again, and maybe twice at his version number: It's is VX10c-EUR-XX
I'm not talking about XX, but about the first "X"... see?
Sure, your device is the same as mine v20d-EUR-XX which is a retail model, but this is not the case for VX10C-EUR-XX which is unfortunately a demo model
Ok, finally, it seems that I can't update automatically with a G4 ROOTED.
When I launch the update this message pop "phone restarting"
Then boot directly on TWRP... (>_<)
So obviously I can't execute this update automatically... :'(
Sylar37 said:
Ok, finally, it seems that I can't update automatically with a G4 ROOTED.
When I launch the update this message pop "phone restarting"
Then boot directly on TWRP... (>_<)
So obviously I can't execute this update automatically... :'(
Click to expand...
Click to collapse
Off you can't. You have another recovery. Use LG UP and flash it. Easier can't be. Note you will lose root and the recovery.
Riardon said:
Off you can't. You have another recovery. Use LG UP and flash it. Easier can't be. Note you will lose root and the recovery.
Click to expand...
Click to collapse
OK but where can I drop the .kdz file?
I searched on http://devtester.ro/projects/lg-firmwares/country.php?country=France#
But even if the last update is was today I can't find the firmware h81520(x_00)... =/
Thank you for your help. =)
OllieD said:
Do you have an accurate source to backup your wild claims?
My EU (UK) H815 v20d-EUR-XX is currently downloading the update.
No need for a manual flash and my device certainly was not a store demo model.
Click to expand...
Click to collapse
Me too same model. I don't know what they're talking about. Store models can't even make calls and this deters people from trying to steal them.
---------- Post added at 03:41 PM ---------- Previous post was at 03:40 PM ----------
Sylar37 said:
Ok, finally, it seems that I can't update automatically with a G4 ROOTED.
When I launch the update this message pop "phone restarting"
Then boot directly on TWRP... (>_<)
So obviously I can't execute this update automatically... :'(
Click to expand...
Click to collapse
Same. Luckily, they seem to have deleted the update so you need to redownload. At least we don't have 500MB lurking somewhere.
Sylar37 said:
Ok, finally, it seems that I can't update automatically with a G4 ROOTED.
When I launch the update this message pop "phone restarting"
Then boot directly on TWRP... (>_<)
So obviously I can't execute this update automatically... :'(
Click to expand...
Click to collapse
Sylar37 said:
OK but where can I drop the .kdz file?
I searched on http://devtester.ro/projects/lg-firmwares/country.php?country=France#
But even if the last update is was today I can't find the firmware h81520(x_00)... =/
Thank you for your help. =)
Click to expand...
Click to collapse
Go to thread about the Portugal update and download the KDZ from there. Any link from that thread is the international H815 update. Don't worry about countries and shenanigans is the same firmware for all. V20g-EUR-XX. Install LG UP on your PC. First the DLL then the program. Place the KDZ in your LG UP install directory (Crogram Files (x86)/LG Electronics/LGUP/model/8994). Put your phone in download mode. (With phone turned off press Volume UP and with it press plug in the USB cable). Click refurbished option for a complete wipe and clean flash. Before all this make a backup. You can also select upgrade option to avoid wipe but I always recommend a clean flash. Read the according threads in XDA for further information if you need.
It seems the h818p will not be updated(yet)?
@src151 thanks for the info. I didn't knew that demo phones can have the GSM module. At least I got it at a very good price
I will upgrade manually then.

[STOCK]-New ROM 32.2.A.0.305 rolling out E6853

Starting to appear in XperiFirm not sure of changelog,
So far its August security patch and there appears to be a charging optimization option now when you charge your device, it came up when I first plugged it in but i cannot seem to find it again.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Regards
Sal
It works perfectly here on a Z5 Premium Dual (E6883)
To find the "Charging Optimization" option, go to: settings, about phone, status.
cabegol said:
It works perfectly here on a Z5 Premium Dual (E6883)
To find the "Charging Optimization" option, go to: settings, about phone, status.
Click to expand...
Click to collapse
What region do you have for E6883? Haven't received it yet, debating whether to flash manually or not. I started to see better reception on default rom with hone but worried abkthee region might reduce my reception inside buildings in Japan.
Thanks.
New added features:
Move apps to external SD CARD
Charging optimizations
Possible brightness fix.. (seems sharper)
More as I discover them...
@kioshi: I'm in the US but have updated through flashtool (downloaded the file manually).
Best!
cabegol said:
@kioshi: I'm in the US but have updated through flashtool (downloaded the file manually).
Best!
Click to expand...
Click to collapse
Which CDA did you download and install?
the new update if done by OT takes to much internal space! so i had to reflash it, its taking about 8gb now.
foopy said:
Which CDA did you download and install?
Click to expand...
Click to collapse
This is the one I've used:
1299-1275 Customized MY 32.2.A.0.305-R9C
https://xpericheck.com/cda/1299-1275
YasuHamed said:
the new update if done by OT takes to much internal space! so i had to reflash it, its taking about 8gb now.
Click to expand...
Click to collapse
Really? When I bought the z5p, I had the August updates to install and did it via OTA. It didn't take space and I only had to clear the cache.
Did you clear cache? That can accumulate quickly.
By the way, using the Malaysian firmware, you receive better reception inside buildings in Japan for e6883 model.
I got the update via OTA today.
Sent from my E6853 using Tapatalk
kioshi said:
Really? When I bought the z5p, I had the August updates to install and did it via OTA. It didn't take space and I only had to clear the cache.
Did you clear cache? That can accumulate quickly.
By the way, using the Malaysian firmware, you receive better reception inside buildings in Japan for e6883 model.
Click to expand...
Click to collapse
via OTA it keeps files! flashing is always much better in my experience...
Might be a bug but I had a moment on this rom where everything froze and place holders appeared around all buttons and functions, it was a bit like talkback had been turned on. Had to do a hard reset.
I have not received the update yet. Does the "move apps to SD" work?
In France I received the OTA yesterday
CodeNameRedNeck said:
I have not received the update yet. Does the "move apps to SD" work?
Click to expand...
Click to collapse
Yes it does as far as I am aware
Security/Patch level is "excellent". Well done.
And to be more funny (it is for me really! I am not trying to offend or get pissed off anybody!), adding screenshot from a totally obsolete 2012 device (I know this CM, but still the difference it too bright here..)
salsoul said:
Yes it does as far as I am aware
Click to expand...
Click to collapse
I went ahead and flashed it with flashtool and all the apps that support being moved to SD move and work well.
9th October this was first released and they have only rolled out just about half csc's. Whats the hold up ? November will be here soon and were waiting for August security patch.... talk about sloooww
My Xperia Z5 Premium still didn't receive that patch. Factory unlocked version bought from Amazon UK.
jontr said:
My Xperia Z5 Premium still didn't receive that patch. Factory unlocked version bought from Amazon UK.
Click to expand...
Click to collapse
me neither!
so i flashed it using flashtool my self!

Problem with the 4G network

Let's see if you can get me out of doubt and help. I have the x720 and at first I took the 4g network without any problem, but I have not taken it for a while, but not even a moment, it is as if it had ceased to exist. I have not changed company, or sim or anything. What I have done is flash a lot of roms trying some and others and sometimes having even semi bricks. Could this have affected the correct functioning of the modem? Could the LTE network have been disabled in some way from my device?
I hope he is not the only weirdo that this happens and you can help me.
Thank you
djgus74 said:
Let's see if you can get me out of doubt and help. I have the x720 and at first I took the 4g network without any problem, but I have not taken it for a while, but not even a moment, it is as if it had ceased to exist. I have not changed company, or sim or anything. What I have done is flash a lot of roms trying some and others and sometimes having even semi bricks. Could this have affected the correct functioning of the modem? Could the LTE network have been disabled in some way from my device?
I hope he is not the only weirdo that this happens and you can help me.
Thank you
Click to expand...
Click to collapse
Firmware? Rom?
kukuteku said:
Firmware? Rom?
Click to expand...
Click to collapse
Now Gizrom 1.4 26s
As I have read in some forum, apparently you can not flash the firm 28s because it disables band 20 (4G). That's true? If so, would it have a solution? I had no idea that flashing firm 28s or higher could happen that. Certainly I have done it on occasion.
djgus74 said:
Now Gizrom 1.4 26s
As I have read in some forum, apparently you can not flash the firm 28s because it disables band 20 (4G). That's true? If so, would it have a solution? I had no idea that flashing firm 28s or higher could happen that. Certainly I have done it on occasion.
Click to expand...
Click to collapse
Flash 26s from my AFH. Then boot directly to fastboot and type
Fastboot erase modemst1
Fastboot erase modemst2
Quavosh said:
Flash 26s from my AFH. Then boot directly to fastboot and type
Fastboot erase modemst1
Fastboot erase modemst2
Click to expand...
Click to collapse
Thank you for your master response, but I have already tried and what I have achieved is even worse. Now I have no service in any of the sim. How can I solve this to leave it with all the band as when I bought it?
djgus74 said:
Thank you for your master response, but I have already tried and what I have achieved is even worse. Now I have no service in any of the sim. How can I solve this to leave it with all the band as when I bought it?
Click to expand...
Click to collapse
Try flashing stock 26s it should restore bands. Check your bands with network guru apk.
Quavosh said:
Try flashing stock 26s it should restore bands. Check your bands with network guru apk.
Click to expand...
Click to collapse
After trying what you told me yesterday nothing changed. I even used qfil to supposedly restore everything as in the beginning but the result was the same. I was already desperate because the problem was even more serious than at first. I did not have a network Then I remembered that I had made a nandroid + efs of gizrom 1.4 as a last resort. I installed it and finally it turned everything to me as it was at the beginning, that is, I have a network but I still do not have 4g. I do not want to give up but I can not think of anything else that I have already done. Will I have to resign to lose that band? Aaaaa and another very strange thing that left me a little restless. By putting nandroid directly by recovery in the option to access the folders, I recognized on the pc as x727 instead of x720 which is mine. That has left me pretty pissed. I do not know if you can think of something else I can try. Thanks for everything
djgus74 said:
After trying what you told me yesterday nothing changed. I even used qfil to supposedly restore everything as in the beginning but the result was the same. I was already desperate because the problem was even more serious than at first. I did not have a network Then I remembered that I had made a nandroid + efs of gizrom 1.4 as a last resort. I installed it and finally it turned everything to me as it was at the beginning, that is, I have a network but I still do not have 4g. I do not want to give up but I can not think of anything else that I have already done. Will I have to resign to lose that band? Aaaaa and another very strange thing that left me a little restless. By putting nandroid directly by recovery in the option to access the folders, I recognized on the pc as x727 instead of x720 which is mine. That has left me pretty pissed. I do not know if you can think of something else I can try. Thanks for everything
Click to expand...
Click to collapse
It's ok my 720 is also 727 in recovery mtp. Also try switching slots
Quavosh said:
It's ok my 720 is also 727 in recovery mtp. Also try switching slots
Click to expand...
Click to collapse
Same results friend
djgus74 said:
Same results friend
Click to expand...
Click to collapse
K did you check ur bands with Network guru apk?
Quavosh said:
K did you check ur bands with Network guru apk?
Click to expand...
Click to collapse
I just did this tutorial I do not know if it is successful and after reviewing the network guru application, it appears to me in the following way. Does this mean that it is already solved? or should I do something in the application to check
https://forum.xda-developers.com/le-pro3/help/lte-bands-help-t3641291
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
djgus74 said:
I just did this tutorial I do not know if it is successful and after reviewing the network guru application, it appears to me in the following way. Does this mean that it is already solved? or should I do something in the application to check
Click to expand...
Click to collapse
Yep all seems fine you can uninstall it

RMX1931EX_11.C.23 rolling out (Realme UI V1.0 - Android 10 stable)

New version today, 27/03/2020
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It's finally the stable release !! For more information : https://c.realme.com/in/post-detail...64863306907648&subForumId=1197159778845982720
I tried 6 or 7 different vpn and still cant get that update.
X2pro eu locked bootloader
TheCrownClown said:
I tried 6 or 7 different vpn and still cant get that update.
X2pro eu locked bootloader
Click to expand...
Click to collapse
Me too, used app seed4
Thanks Nathan. Nothing related, but I sent you a PM cause I have a problem since latests updates where I am stucked with ipv6, if I switch to ipv4, no data at all anymore (Bouygues telecom)
Did you received the PM ? I would like to know, if possible, if you are on ipv4 with bouygues and with data ok ? Eventually share your bouygues APN settings ?
Thanks a lot !
Cheers
ManuBBXX said:
Thanks Nathan. Nothing related, but I sent you a PM cause I have a problem since latests updates where I am stucked with ipv6, if I switch to ipv4, no data at all anymore (Bouygues telecom)
Did you received the PM ? I would like to know, if possible, if you are on ipv4 with bouygues and with data ok ? Eventually share your bouygues APN settings ?
Thanks a lot !
Cheers
Click to expand...
Click to collapse
I'm on IPv6 also
It is just a lucky case, all of us are able to use a vpn but update doesn't arrive
Which vpn you are using? I'm tried with ufo vpn but no luck btw my phone is chinese variant
nathan30 said:
Here we goooooooo
To install it (Tried on a EU version, with locked bootloader) :
- Choose a VPN
- Select INDIA
- Go to settings/updates
- Download
- Install
- Enjoy
Click to expand...
Click to collapse
No luck yet! I guess it only works who filled the early access form.
Now we have C21
I got c21, with purevpn India in EU. Its really fast and nice ui but it broke google pay nfc payments for me. Some error about device might be rooted and is not certified.
mikaju said:
I got c21, with purevpn India in EU. Its really fast and nice ui but it broke google pay nfc payments for me. Some error about device might be rooted and is not certified.
Click to expand...
Click to collapse
It's because it's still early test version... Should be sorted on stable rollout.
tried torguard with no success.
mikaju said:
I got c21, with purevpn India in EU. Its really fast and nice ui but it broke google pay nfc payments for me. Some error about device might be rooted and is not certified.
Click to expand...
Click to collapse
I updated also my eu phone to realme ui. Do you have option for sidebar? Because mine disappeared after the update
Sidebar seems to be gone from me as well. Is this still beta version? Seems pretty final apart from broken google pay.
its work for me
i used expressvpn and select india and i got the update c.21
haron5544 said:
its work for me
i used expressvpn and select india and i got the update c.21
Click to expand...
Click to collapse
I used seed4 vpn and selected India too. I hope it will be fixed with the stable release or else I think a factory reset is needed
https://www.ytechb.com/install-real...-beta-update-manually-with-ota-download-link/
chtsarts said:
I used seed4 vpn and selected India too. I hope it will be fixed with the stable release or else I think a factory reset is needed
Click to expand...
Click to collapse
Factory reset Is needed i had the same, after reset no problem. to update I use urban vpn of course location India
seccakrown said:
Factory reset Is needed i had the same, after reset no problem. to update I use urban vpn of course location India
Click to expand...
Click to collapse
Is there possible to install realme ui on chinese variant with lock bootloader.I'm tried 7-8 vpn but not working. Have any idea bro?
rwanbd said:
Is there possible to install realme ui on chinese variant with lock bootloader.I'm tried 7-8 vpn but not working. Have any idea bro?
Click to expand...
Click to collapse
I don't think so, I had the update on the EU version with Indian firmware, I think it's quite risky

Categories

Resources