Database Users

MMS Now working On ICS XXLPH

I'm in North America and using the I9100 SG2. I also wanted to try ICS 4.0.3. I stumbled upon a fix to get MMS working finally. This is what I did.
First I flashed a stock UHKG7 rom from sammobile and backed everything up with Titanium Backup. Checked, everything worked.
Then rooted with the appropriate CWM flash. Then flashed the Ibyani rom 3.2 without wiping the system but did clear the Dalvik, Cache and Battery stats, Fixed permissions and rebooted. This resulted in a ICS build where I could send MMS pictures but Not receive MMS pictures. The same problem I've seen using many different custom roms. Half way there. In the Titanium backup there was a system apk named MMS provisioning 2.3.4 I went ahead and restored this APK without including the data. Titianium locked up on restoring. I let it set for a few minutes and when ahead and rebooted the phone expecting a need to use CWM to recover to a known working system again. However the phone booted up and worked, I could also send and receive MMS pictures on ICS, Whoopie it worked. My MMS BUG CURED.
Not what I was expecting but it works?

Is this a US only carrier issue?
I'm on stock LPH using stock (rooted) kernel in the UK and MMS works without any problems for me, both sending and receiving
Sent from my GT-I9100 using xda premium

stuclark said:
Is this a US only carrier issue?
I'm on stock LPH using stock (rooted) kernel in the UK and MMS works without any problems for me, both sending and receiving
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Not for me, I use AT&T carrier and no problem with MMS on ICS.

This guy went through alot of work. My MMS using LPH ROM works fine. Sometimes I have to turn wifi off to download an MMS though. Still much quicker & easier than his method. I'm on AT&T, I did create my own APN though.

I dont have any problems with my stock 4.0.3 rom and im on Rogers in Canada

MMS doesn't work for me on LPH, Optus, Australia.

To the AT&T users: what APN's are you guys using? I can't MMS to send. I'm on stock LPH, and I'm on a grandfathered unlimited 4G plan.

i don't have a data plan, and was wondering if it was possible to get mms working through wifi... anyone figure out how to do that?

mms on lph works finr for me ....if i'm on mobile data, wifi it won't work.
the difference with this rom is that it doesn't seem to save the APn settings i try to add manually ...but ... it works never the less.

digirat said:
i don't have a data plan, and was wondering if it was possible to get mms working through wifi... anyone figure out how to do that?
Click to expand...
Click to collapse
No, that won't work - MMS typically uses IPs / addresses only routable via the mobile network. All MMS uses mobile data regardless of WiFi connectivity.

Read Entire Post Before Inputting Info
King Shady said:
To the AT&T users: what APN's are you guys using?
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AT&T APN, I mixed & matched some input from other APNs to create my own. There it is.
The APN below is strictly for MMS send & receive.

You are right I did go through a lot of work and a whole lot more frustration. The carrier I use is a small local carrier that uses unbranded and unlocked international hand sets. Union Wireless. They use two APN's one for internet data and one for MMS data. I verified APN settings with the carrier. Had a local tech support person who recommended some different settings, combined settings and nothing would work. I spent lots of hours searching here and on other sources for a potential solution. And also tried other roms and builds, Nothing worked except original GB NA ROMs rooted or unrooted until I stumbled about this via blind luck. Yes this thread may be pointless for those of you on other carriers or with working MMS however in my case it cured my problem.

I have the same issue with all ics roms. Same situation. Small, obscure network that piggybacks a larger network. NO FREAKIN MMS. Waa hoping to use this fix on my nexus s but I cant find this MMS provisioning apk anywhere on any gb rom. Any hints?
Sent from my Nexus S using Tapatalk

Yeah could someone please upload this apk from a GB rom to dropbox and post a link?
***Shiny new SGSII running foxhound ICS LPH, itching for official sources...***

in APN TYPE, if you use the same APN for internet, your APN TYPE should be : "default,mms"
and you should save it

See this thread. Maybe helpful, maybe not...
http://forum.xda-developers.com/showthread.php?p=26393008
....memoirs of a flash addict.

Hello, is anyone here familiar with stock msgr working fine, sending and receiving mms but a 3rd party msgr like handcent receiving but not sending...?
I'm not sure but with wireless on it looks like it is using wifi to send, because the sending notice goes real fast and says sent almost immediately... Without wifi it takes longer and either way is not received on other phones...
Using AOKP JB 4.2.2...

G900F lost service after new rom flash?

Hey guys! I recently bought a Galaxy S5 through an ad a week ago and everything was working perfectly!
I then decided to flash the XtreStoLite rom because I was excited about the features and after I had flashed
it everything booted up without any issues and the network showed i had full service. A few hours passes by
and I notice I havent recieved any text messages or calls and that's when I notice that it says I can only make emergency calls.
I reflashed stock samsung rom but I still had the same issues. I first thought it was blacklisted / barred but for every other day
I keep searching for the IMEI to pop up in any of the databases but still nothing... Every service tells me the phone is unlocked.
I have no idea what to do or try at this point since I live in Sweden and bought the phone in Denmark and I dont even know what carrier
it was under

Nobody with any tips on what I could do? Still to this day every IMEI check site I go to says the IMEI is clean and all these errors started happening after I flashed another rom..
What are my options at this point?

I'm still stuck in between every site telling me the phone is unblocked and being stuck with the phone saying "not connected to network".. What can I do at this point? I've been googling alot but did not find any answers at all.

Karismatic.Blasphemy said:
I'm still stuck in between every site telling me the phone is unblocked and being stuck with the phone saying "not connected to network".. What can I do at this point? I've been googling alot but did not find any answers at all.
Click to expand...
Click to collapse
I think I have the same problem. I bought the phone from private seller so I don't know what was the actual location of the phone.
http://forum.xda-developers.com/showthread.php?t=2753295)

Hi, did you find any solution?
can you share screenshot of the info you get when you dial *#0011# in dialer.

uktel3315 said:
Hi, did you find any solution?
can you share screenshot of the info you get when you dial *#0011# in dialer.
Click to expand...
Click to collapse
My phone says IMEI passes, and network is unblocked. I flashed Alliance rom and it worked last night. This morning it kicked me off all data. No phone number and no network access. I go to dial and I get the roaming warning for US Cellular. I posted my own thread and found this one as well. I also sent a PM to Alliance rom dev and posted in that thread. I need some serious help.
Edit: I also have no PRL version, no "MIN", no phone number, and "mobile network state" says disconnected.

uktel3315 said:
Hi, did you find any solution?
can you share screenshot of the info you get when you dial *#0011# in dialer.
Click to expand...
Click to collapse
Sure no prob. Here is a print:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Karismatic.Blasphemy said:
I'm still stuck in between every site telling me the phone is unblocked and being stuck with the phone saying "not connected to network".. What can I do at this point? I've been googling alot but did not find any answers at all.
Click to expand...
Click to collapse
Are the APN´s listed unter "mobile networks/access points" ?

cokenet said:
Are the APN´s listed unter "mobile networks/access points" ?
Click to expand...
Click to collapse
I have no idea.. how do I check that?
Edit:
Just checked it, jupp I have the APN and i ticked it but no change. Cant register to network.

Karismatic.Blasphemy said:
I have no idea.. how do I check that?
Click to expand...
Click to collapse
Go to Settings/More neworks/Mobile networks/Access Point Names!
If there are no entries, something is wrong. You need the APS´s for connecting the the network.
You cant find the correct APN´s of your Provider with google or in the FAQ of your Provider.
If you have them, you can enter the APN´s manually by klicking the "+" and type the address for web and then for mms. Its needed.
---------- Post added at 04:55 PM ---------- Previous post was at 04:54 PM ----------
Karismatic.Blasphemy said:
I have no idea.. how do I check that?
Edit:
Just checked it, jupp I have the APN and i ticked it but no change. Cant register to network.
Click to expand...
Click to collapse
Hm ok. ****
---------- Post added at 04:58 PM ---------- Previous post was at 04:55 PM ----------
Try to flash maybe a different Rom, or try the stock one again, just 4 testing, if it´s working again.

Try flashing a stock firmware via Odin. Get one from Sam Mobile. Had a friend that something similar happened to him and in the end it turned out the phone was blacklisted, even showing a clean IMEI in multiple sites. Also, if you have lying around a backup of your EFS, try restoring that and see if it fixes your problem (fixed mine once).

omegajester said:
Try flashing a stock firmware via Odin. Get one from Sam Mobile. Had a friend that something similar happened to him and in the end it turned out the phone was blacklisted, even showing a clean IMEI in multiple sites. Also, if you have lying around a backup of your EFS, try restoring that and see if it fixes your problem (fixed mine once).
Click to expand...
Click to collapse
I've tried Echo rom, Xtrolite, stock & phoenix.
Currently im on latest stock rom updated with Kies. Only thing i've modified is root & install recovery but other than that it's all stock.
At this point I'm thinking about getting a asansam box and try fixing the phone myself.

[Q] Porting Hyperdrive Rom To Sprint s4?

Hey is it possible for anyone to make a working port of the Verizon Hyperdrive Rom to the Sprint s4 preferably to the triband version but the regular is fine to or even better make it unified anyone interested in doing this?

You can flash almost any ATT Verizon and T-Mobile ROM

Not unless its Unified. Unless you wanna hard brick your phone. The reason i say that is because my version of the s4 is very very particular on what's flashed.

jam0688 said:
Not unless its Unified. Unless you wanna hard brick your phone. The reason i say that is because my version of the s4 is very very particular on what's flashed.
Click to expand...
Click to collapse
False. Flash your ROM of choice, then flash a Sprint kernel before rebootong. Works for almost every ROM from the other carriers.

Well I'll just have to try it and see is all i can say. Ive got the triband version of the sprint s4 and a buddy can back me up on this it's very very particular.

If i used the Verizon Hyperdrive Rom what would be the best sprint kernel that wouldn't cause any issues

Since it is based on NC5, I would guess that NC6 would be a good starting point.

I install Hyperdrive RLS17.1 on sph-l720
I used TWRP to flash Hyperdrive+RLS17.1+KK+S4+Final. I wiped all partitions but Micro SDcard. Installed like any other rom selected verizon has carrier. Flashed StockNAEKernel.zip before I restarted. Everything was working but I had no data and HiddenMenu would force close when I first booted. Other than them two problem wifi, calling, and texting was fine. I was hoping someone could help me get data to work because this is the best rom I have ever ran on my S4.

madmediapro said:
I used TWRP to flash Hyperdrive+RLS17.1+KK+S4+Final. I wiped all partitions but Micro SDcard. Installed like any other rom selected verizon has carrier. Flashed StockNAEKernel.zip before I restarted. Everything was working but I had no data and HiddenMenu would force close when I first booted. Other than them two problem wifi, calling, and texting was fine. I was hoping someone could help me get data to work because this is the best rom I have ever ran on my S4.
Click to expand...
Click to collapse
Sprint 4G LTE APN
APN: n.ispsn
MMSC: http://mms.sprintpcs.com
Multimedia message proxy: 68.28.31.7
Multimedia message port: 80
MCC: 310
MNC: 120
For running Verizon custom ROMs on Sprint phones, this APN setting will allow everything to work including 3G, 4G LTE, SMS sending/receiving, and MMS receiving. But MMS sending will not work!
There is a work-around this, just use 8SMS app, which can replace your SMS app and also allow you to send MMS. (install and enable, that’s it!)
https://www.youtube.com/watch?v=FRCFNSQ66Eo

I wish it was that easy. I flashed my phone to Straight Talk on Verizon CDMA Network. If I use my sprint SIM my data would work, then error out after a few minutes. If I boot up with no sim no data. I'm not sure what to do. Thanks for the info!

I will gives this another try. Once before i flashed the verizon hyoperdive rls18 rom on my phone using verizon set up and for 5 minutes i had service and then i lost it. also before installing the rom i replaced the current apn conf of the rom with my stock sprint apn conf and i used the stock nc6 kernel as well. but i never did input a manual capn conf to it so maybe thats the key thing. it had sprint apns after i did the conf thing but maybe something was missing. thanks for this advice and will give it a try. will let know what happens.

jam0688 said:
I will gives this another try. Once before i flashed the verizon hyoperdive rls18 rom on my phone using verizon set up and for 5 minutes i had service and then i lost it. also before installing the rom i replaced the current apn conf of the rom with my stock sprint apn conf and i used the stock nc6 kernel as well. but i never did input a manual capn conf to it so maybe thats the key thing. it had sprint apns after i did the conf thing but maybe something was missing. thanks for this advice and will give it a try. will let know what happens.
Click to expand...
Click to collapse
I'm running Hyperdrive right now everything works besides sending mms
Edit: I'm on ng2 so I flashed the ng2 stock kernel. If you are NAE flash the NAE kernel or choose Ktoonz during aroma install
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Xperia Z5 -> Three UK VOLTE

Now that Three UK has officially declared support for 800Mhz VOLTE on the Xperia Z5 I was wondering if anybody tried connecting to 800Mhz frequency.
I have got a EE sourced Z5 and I wonder whether it will connect to 800Mhz if I fash it with Three software.

If you flash it, possibly. There's no harm in flashing to find out and flashing back if you aren't satisfied.

sovanyio said:
If you flash it, possibly. There's no harm in flashing to find out and flashing back if you aren't satisfied.
Click to expand...
Click to collapse
no change..
It keeps connecting to H+ and occasionallt 0 to 1 bar of 4G.

olisun39 said:
no change..
It keeps connecting to H+ and occasionallt 0 to 1 bar of 4G.
Click to expand...
Click to collapse
Sounds like you're just in a bad coverage area, but there might be a certificate required for VoLTE on 3 that isn't on the EE firmware, not sure how its implemented outside of the US

sovanyio said:
Sounds like you're just in a bad coverage area, but there might be a certificate required for VoLTE on 3 that isn't on the EE firmware, not sure how its implemented outside of the US
Click to expand...
Click to collapse
I installed the Three firmware but I haven't done a factory reset as yet.

olisun39 said:
I installed the Three firmware but I haven't done a factory reset as yet.
Click to expand...
Click to collapse
I don't know why you would need a factory data reset. But if you want to go ahead

Your phone should connect to the best band provided by your network by default, I don't think it's going to matter what European firmware you use. If you are on Three I would flash the Three firmware anyway so you can use VOLTE when it comes out.

jeremy_inc said:
Your phone should connect to the best band provided by your network by default, I don't think it's going to matter what European firmware you use. If you are on Three I would flash the Three firmware anyway so you can use VOLTE when it comes out.
Click to expand...
Click to collapse
Looks like the update is arriving in mid December even though the website says otherwise.

olisun39 said:
Looks like the update is arriving in mid December even though the website says otherwise.
Click to expand...
Click to collapse
I did a reset of my phone last night and today I noticed I can connect to the 800Mhz and actually use it.
I don't have VOLTE but it works as a data network
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

You got a link of the three firmware?

Im after flashing this 3 firmware i have flashed a z3 before but that was a tff file and real easy to do. I have downloaded the flashtool and firmware but struggling with this

chrisully said:
Im after flashing this 3 firmware i have flashed a z3 before but that was a tff file and real easy to do. I have downloaded the flashtool and firmware but struggling with this
Click to expand...
Click to collapse
Use the flashtool to automatically download the firmware for you.
It downloads and prepares the files for you to flash your Z5.

olisun39 said:
Use the flashtool to automatically download the firmware for you.
It downloads and prepares the files for you to flash your Z5.
Click to expand...
Click to collapse
I'm on Windows 10 and says drivers and not installed for fastboot grr

chrisully said:
I'm on Windows 10 and says drivers and not installed for fastboot grr
Click to expand...
Click to collapse
Search for Flashtool-drivers-1.5-20140318.exe.
I think it's available in this forum somewhere.

olisun39 said:
Search for Flashtool-drivers-1.5-20140318.exe.
I think it's available in this forum somewhere.
Click to expand...
Click to collapse
just realised needed to disable driver signature on windows 10 duu my bad flashing now. Thanks for the help though

Flashed now and working fine not factory reset. Updates will be from three now?

chrisully said:
Updates will be from three now?
Click to expand...
Click to collapse
That's the gist of it, yeah. You've just flashed your phone with the 3 customisation so that's who updates need to come through.

Cool thanks again ?

chrisully said:
Flashed now and working fine not factory reset. Updates will be from three now?
Click to expand...
Click to collapse
You will have to factory reset your phone because you will get a small system update from Three, which I think enables the 800Mhz network.
Not sure if it supports VOLTE but my phone doesn't show the VOLTE arrows but I have made calls while on 4G.
Or you can try to connect to the 800Mhz 4G network by going to a area where the 1800Mhz 4G signal is weaker.

I have factory reset now but got no update as of yet
---------- Post added at 12:02 PM ---------- Previous post was at 11:51 AM ----------
olisun39 said:
You will have to factory reset your phone because you will get a small system update from Three, which I think enables the 800Mhz network.
Not sure if it supports VOLTE but my phone doesn't show the VOLTE arrows but I have made calls while on 4G.
Or you can try to connect to the 800Mhz 4G network by going to a area where the 1800Mhz 4G signal is weaker.
Click to expand...
Click to collapse
https://onedrive.live.com/redir?resid=43164BBA4C2CE0BE!2704&authkey=!APEROTP7hRm2yjw&v=3&ithint=photo%2cpng

AT&T Nougat ROM Carrier aggregation

On my S7 edge,i have flashed between all the different roms but since my HD Voice,Wi-Fi Calling, and VoLTE (All very important features for me) don't work, I reverted to my stock rom. the carrier aggregation says "CA-not configured 00" and was getting 50% worse speeds than my two year old iPad Air 2. I have ran it on many different cell towers which I know have the Carrier aggregation enabled but it sill wouldn't connect.

It may have gotten disabled somehow. CA can be enabled/disabled in the Service Menus
Sent from my SM-G935V using Tapatalk

maliibu31 said:
It may have gotten disabled somehow. CA can be enabled/disabled in the Service Menus
Sent from my SM-G935V using Tapatalk
Click to expand...
Click to collapse
Elaborate?
Sent from my SAMSUNG-SM-G935A using Tapatalk

darthmalus said:
Elaborate?
Sent from my SAMSUNG-SM-G935A using Tapatalk
Click to expand...
Click to collapse
It seems that the code to get there has been disabled in 7.0
AT&T variant had a code on MM that you type into the dialer to being up one of the Service Menus. The code for the Verizon variant is *#27663368378# and can be accessed after root & modification to one of the carrier files for Hidden Menus.
I believe the code was *#197328640# but like I said they appear to be dead now.
Here are some screens that I took of my phone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-G935V using Tapatalk

Oh ok, I remember messing with that in my S5. You wouldn't know how to get voLTE back on nougat by any chance? I came from the 935U firmware .
Sent from my SAMSUNG-SM-G935A using Tapatalk

maliibu31 said:
It seems that the code to get there has been disabled in 7.0
AT&T variant had a code on MM that you type into the dialer to being up one of the Service Menus. The code for the Verizon variant is *#27663368378# and can be accessed after root & modification to one of the carrier files for Hidden Menus.
I believe the code was *#197328640# but like I said they appear to be dead now.
Here are some screens that I took of my phone.
Sent from my SM-G935V using Tapatalk
Click to expand...
Click to collapse
How do you change the files to accept the codes? If i flashed my phone to the verizon version and do this,would i lose the carrier aggregation once i flash back to att. my goal is to return the phone back to what it was prior to all the rom flashing because i plan to sell the phone on ebay so i can get the s8+

Sounds like you need to re-ODIN the firmware on your phone to trigger CA
Sent from my SM-G935V using Tapatalk

maliibu31 said:
Sounds like you need to re-ODIN the firmware on your phone to trigger CA
Sent from my SM-G935V using Tapatalk
Click to expand...
Click to collapse
so what your trying to say is that i should reodin the phone back to marshmellow to get the carrier aggregation? I have tried that already and it still wont work. I can access the servicemode on marshmallow but it says AS Infromation Common and it wont let me change anthing

willanderson_x2 said:
so what your trying to say is that i should reodin the phone back to marshmellow to get the carrier aggregation? I have tried that already and it still wont work. I can access the servicemode on marshmallow but it says AS Infromation Common and it wont let me change anthing
Click to expand...
Click to collapse
In addition to re-ODINing the phone,I also flashed the Verizon firmware and rooted it to get the carrier aggregarion menu and when I put it back to the AT&T firmware,i still got the CA-Not Config 0 0 status in the servicemenu.On the tmobile firmware the 3x carrier aggregations work (I don't have another phone to see if AT&T CA works and I'm still waiting for my T-Mobile SIM to see if it's not the phone itself that's wrong)

willanderson_x2 said:
In addition to re-ODINing the phone,I also flashed the Verizon firmware and rooted it to get the carrier aggregarion menu and when I put it back to the AT&T firmware,i still got the CA-Not Config 0 0 status in the servicemenu.On the tmobile firmware the 3x carrier aggregations work (I don't have another phone to see if AT&T CA works and I'm still waiting for my T-Mobile SIM to see if it's not the phone itself that's wrong)
Click to expand...
Click to collapse
UPDATE: I have gottwn the SIM,its not working on the firmware whatsowver. I flashed the U firmware but i still have rhis issue

willanderson_x2 said:
UPDATE: I have gottwn the SIM,its not working on the firmware whatsowver. I flashed the U firmware but i still have rhis issue
Click to expand...
Click to collapse
Quite honestly,i think ill forego using the stock firmware,if it works on tmobile,ill happy without hd voice or volte for now