Database Users

Mk808 android 4.1 mini pc

http://www.geekbuying.com/item/MK80...ip-RK3066-Cortex-A9-Mini-PC-stick-307415.html
What everyone think? Anybody took the leap and bought it yet? I was thinking about getting one so I don't have to hookup my laptop to my TV anymore
Sent from my SGH-T999 using xda premium

nice gadget!!
richeazy said:
http://www.geekbuying.com/item/MK80...ip-RK3066-Cortex-A9-Mini-PC-stick-307415.html
What everyone think? Anybody took the leap and bought it yet? I was thinking about getting one so I don't have to hookup my laptop to my TV anymore
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I got mine mk808 yesterday. I bought a mk802 in august but it "burned" after 1 week. I also think that the mk802 was very laggish... The mk808 is far much better!!!
So far I am very very very happy with it!
regards

gillidk said:
I got mine mk808 yesterday. I bought a mk802 in august but it "burned" after 1 week. I also think that the mk802 was very laggish... The mk808 is far much better!!!
So far I am very very very happy with it!
regards
Click to expand...
Click to collapse
gillidk, Did you buy yours from geekbuying? How long was the delivery and which country are you
I was about to order the similar GV-20 mk808 based device from gadgetgreats but poeple have mentioned fraud etc
http://www.gadgetgreats.com/gv-20-a...i-a9-dual-core-android-4-0-mini-pc-gv-20.html
many thanks

I got mine today. I ordered it over a week ago. Weird because I didn't get my shipping information until last night, and when I tracked it, it was already out for delivery.
My Measy Air Mouse R11 is screwed though I think. It keeps sliding to the left hand side. I even tried on my PC and it does the same thing. I've tried to resync it and screw with it, but it keeps moving. Very hard to use a mouse that doesn't stay still. The MK808 is fun. I just got it tonight. I haven't had the time to get really crazy with it. Seems to run ok and would be far more enjoyable with a good input device.

Ordered mine today (only $60), if it really works as reviews say, it's quite a bargain

Do you still have problems with the rc11 or are they solved ?
send by an 42y old gio junkie™

player911 said:
I got mine today. I ordered it over a week ago. Weird because I didn't get my shipping information until last night, and when I tracked it, it was already out for delivery.
My Measy Air Mouse R11 is screwed though I think. It keeps sliding to the left hand side. I even tried on my PC and it does the same thing. I've tried to resync it and screw with it, but it keeps moving. Very hard to use a mouse that doesn't stay still. The MK808 is fun. I just got it tonight. I haven't had the time to get really crazy with it. Seems to run ok and would be far more enjoyable with a good input device.
Click to expand...
Click to collapse
Did you get it by express delivery or normal delivery
send by an 42y old gio junkie™

I fixed my Measy Air Mouse R11.
To reset the Gyros, you lay it flat and press and hold LEFT ARROW + G for a few seconds... making sure it is flat. Now it works great.
I'm having some weird issues with some misbehaving apps. Root explorer started freaking out. And now my FPse won't use OpenGL for the life of me. I'm interested in trying the CM10 build for it but the operation requirements are bland. Supposedly it requires CWM recovery, which is supplied but doesn't give specifics how or what order or process to get it done.
I have to say that it is a fun unit to work with and chews through FPse roms. I'm surprised how well it runs for a chinese chipset.
Flashing is a bit of a chore and instructions aren't very clear, so I'll post them here:
With the unit OFF:
Insert a paper clip into the reset hole and press it in and HOLD IT down.
Awkwardly insert the MicroUSB-PC cable into the OTG. This will power the unit and it should boot into Flash mode given you've held the paperclip down properly.

Trying to install eGalax Touch Screen linux driver
I'm trying to install the eGalax Touch Screen driver for Linux 2.6 that came with my liliput 7 inch touch screen. The touch screen is for use in my car. Using the mk802 II or ug808 to replace my audio system. I just need to get the driver installed. The driver installation script is looking for the locations "usr/local" and "usr/bin", but the only "usr" directory I can find is in "system/usr"... I'm not sure if I should use that location and create the local and bin directories there or not. But when I created the usr/local and usr/bin at the same level as system (which is in the "mnt" directory which is also at the same level as "root" directory (btw, I cannot find a "home" directory), the install seemed to work fine using Better Terminal Pro android app with the bash shell. However, when I restarted the device, the "usr" directory that I create was gone, so the driver install was wiped apparently, and the usb HDMI touch screen still does not work... I can post the bash script if that helps. This is the last thing I need to get this to work, then I can have a full Android ICS system in my car. Thanks in advance.
FYI The HDMI works great to view and use a usb mouse or the RII keyboard. they work great. It's just the touch screen input does not work. It used to when I first turned on the device with the touch screen on, but the x-y coordinates were reversed, hence attempting to install the driver. I have ICS compiled from source and may attempt to add the drivers into it and create an img to them load on the mk802 II, but I fear that I'll loose any proprietary hardware drivers that came with the mk802 II.
I also wanted to make a img backup using ROM Manager, but ClockworkMod is not available for the MK802 II. ANy leads on this would help. Been researching and testing this for a month now.

rscreen said:
gillidk, Did you buy yours from geekbuying? How long was the delivery and which country are you
I was about to order the similar GV-20 mk808 based device from gadgetgreats but poeple have mentioned fraud etc
http://www.gadgetgreats.com/gv-20-a...i-a9-dual-core-android-4-0-mini-pc-gv-20.html
many thanks
Click to expand...
Click to collapse
Ordered on the 26th for 65$ (actually cost £42 through paypal),
they shipped on the 29th (tracking never worked).
And it arrived on the 6th. So quicker than expected.
I've applied the firmware update which was a slightly newer build of 4.1. Mentioned in both these places (applied the tweaked one from deadhp1 for the play store location fix in case needed)
http://blog.geekbuying.com/index.php/2012/11/03/mk808-mini-pc-firmware-update-on-3th-nov/
http://www.armtvtech.com/armtvtechforum/viewtopic.php?f=13&t=53
It now seems to play any avi / mkv / mp4 i've given it (usually on a usb stick or micro SD). It happily plays avi's over the network (using ES file explorer).
Its definitely better than the out of sync UG802 which wasn't quite right and the power lead came out too easily.
I use the custom stock video app (seems to come with most of the RockChip devices) and MX player (it looks a lot nicer)

I was looking for a device like this one and the reviews are really helpful

Anyone know of GPS that works with these?
jcps said:
I was looking for a device like this one and the reviews are really helpful
Click to expand...
Click to collapse
Anyone know of GPS (USB or embedded) that works with these? Thanks for your help.

So confused... it's a USB drive that turns a TV into an Android PC? Does the TV require any special functionality to allow for that?

Avuja said:
So confused... it's a USB drive that turns a TV into an Android PC? Does the TV require any special functionality to allow for that?
Click to expand...
Click to collapse
It is a mini PC that has HDMI output. Your TV must have a vacant HDMI input so you can plug the mini PC into it. My TV supports 1080p. And so I can set the output resolution on the mini PC to 1080p. But it also could be set to 720p as well. These don't come with any display so you have to plug it in to your TV or a monitor that supports HDMI. The audio is pushed through the HDMI as well. To control it you can use a USB mouse and/or USB keyboard. Your cheap wireless mouse will work but the USB ports do not have power to them so I've had to use a powered USB hub to make my wireless keyboard work further than a foot away from the USB dongle for the keyboard. The hub also allows you to plug in other devices like a USB camera. But the ones that work are somewhat limited , be aware. Does that help you understand it?

Maxx57 said:
I'm trying to install the eGalax Touch Screen driver for Linux 2.6 that came with my liliput 7 inch touch screen. The touch screen is for use in my car. Using the mk802 II or ug808 to replace my audio system. I just need to get the driver installed. The driver installation script is looking for the locations "usr/local" and "usr/bin", but the only "usr" directory I can find is in "system/usr"... I'm not sure if I should use that location and create the local and bin directories there or not. But when I created the usr/local and usr/bin at the same level as system (which is in the "mnt" directory which is also at the same level as "root" directory (btw, I cannot find a "home" directory), the install seemed to work fine using Better Terminal Pro android app with the bash shell. However, when I restarted the device, the "usr" directory that I create was gone, so the driver install was wiped apparently, and the usb HDMI touch screen still does not work... I can post the bash script if that helps. This is the last thing I need to get this to work, then I can have a full Android ICS system in my car. Thanks in advance.
FYI The HDMI works great to view and use a usb mouse or the RII keyboard. they work great. It's just the touch screen input does not work. It used to when I first turned on the device with the touch screen on, but the x-y coordinates were reversed, hence attempting to install the driver. I have ICS compiled from source and may attempt to add the drivers into it and create an img to them load on the mk802 II, but I fear that I'll loose any proprietary hardware drivers that came with the mk802 II.
I also wanted to make a img backup using ROM Manager, but ClockworkMod is not available for the MK802 II. ANy leads on this would help. Been researching and testing this for a month now.
Click to expand...
Click to collapse
probably you will need the kernel sources. also, you need root access. that error (directories that get lost after reboot) might be due to yo need to remount the /system partition in rw mode (by default is ro) and perhaps you will neet to do some symlinks on /bin to /system/xbin.
other thing you..must get in considwration is that android is different from linux.. and that you might need to compile the kernel module, such thiing im not sure that is posible from within the device itself...
or.. i just might be way off track, in which case jyst dismiss my answer
Enviado desde mi MB860 usando Tapatalk 2

Maxx57 said:
Anyone know of GPS (USB or embedded) that works with these? Thanks for your help.
Click to expand...
Click to collapse
I'm very interested to know as well, I have an MK808 and would love to add a GPS dongle.

Anyone know if a headset can be paired over bt for voip calls and or voice commands and search /google now?
Sent from my GT-N8013 using XDA Premium HD app

killerskincanoe said:
Anyone know if a headset can be paired over bt for voip calls and or voice commands and search /google now?
Sent from my GT-N8013 using XDA Premium HD app
Click to expand...
Click to collapse
just so you know it doesn't have built in bluetooth.

if you need bluetooth google for imito mx1. this one seems to be the best mk808 model so far. i got mine last month but haven't tried bluetooth yet. antutu gives a score around 6500. it's a nice toy to play with on bigscreen tvs.

I read up on this one. Good vid review at http://youtu.be/X8pozwuAq7w
Anyone know the spec diff between this and the MX2?
and is geekbuying the best seller for this device or ???
c
h-guy said:
if you need bluetooth google for imito mx1. this one seems to be the best mk808 model so far. i got mine last month but haven't tried bluetooth yet. antutu gives a score around 6500. it's a nice toy to play with on bigscreen tvs.
Click to expand...
Click to collapse
---------- Post added at 11:31 AM ---------- Previous post was at 11:24 AM ----------
can anyone comment on this non-support of XBMC for Rockchip? and if not Rockchip, which stick-PC gets it right?
one comment also that I would like more info on is that both iMITO units underperform compared to MK808
"Lack of XBMC support for HD hardware acceleration is a major issue that Rockchip needs to address if they want to keep selling SoC chips to the Stick PC mfgrs. Stick PC makers need 2 take action on this as well and if Rockchip won't play ball, they need to consider alternative SoC. We need more processing power anyway to get close to current smart-phone level and play the latest 3D games."

[Q] Help! Why TN7 can not connect to DualShock3 via bluetooth？

Hi there! I bought a Tegra Note7 which is equipped with Tegra4 Chipsets.Now I want to play games with DualShock3 via SIXAXIS CONTROLLER. The thing is that the app worked very well on my Moto Droid Bionic,but it did not work on my Tegra Note7. When I clicked "start" with every necessary steps done and the screen displayed address of bluetooth and listening for controllers,the "bluetooth" icon did not appear on the top status bar. So the DS3 controller was continuous flashing its 4 red lights,then no other things took place.
I have restored original android 4.3 rom,no changes. Could*you*please*tell me how to work it out? Thank you!

Before I rooted tablet I was able to plug ps3 controller in and was able to map buttons m8 I also used sixaxis enabler and everything fine until rooted then lost all ps3 controller mappings there's very little info on this subject I asked before ,something to do with Bluetooth drivers !
Sent from my TegraNote-P1640 using XDA Premium 4 mobile app

How about open your eyes, read old threads, use the search function. this issue has been discussed a hundred times now..
e: for the lazy ones..
http://forum.xda-developers.com/showthread.php?t=2633221
http://forum.xda-developers.com/showthread.php?t=2541873&page=3

cars10k said:
How about open your eyes, read old threads, use the search function. this issue has been discussed a hundred times now..
e: for the lazy ones..
http://forum.xda-developers.com/showthread.php?t=2633221
http://forum.xda-developers.com/showthread.php?t=2541873&page=3
Click to expand...
Click to collapse
Yeah,you are right.It does has been discussed for 100 times.,but no one exactly figure it out.

generalradec said:
Yeah,you are right.It does has been discussed for 100 times.,but no one exactly figure it out.
Click to expand...
Click to collapse
There's really nothing to figure out. The bluetooth stack on the stock ROM just doesn't work with PS3 controllers. Until someone can make a custom ROM with some sort of changes to bluetooth (or until Nvidia releases a ROM with decent bluetooth support), it's just not going to work, and there's nothing we can do to change that.

rchrdcrg said:
There's really nothing to figure out. The bluetooth stack on the stock ROM just doesn't work with PS3 controllers. Until someone can make a custom ROM with some sort of changes to bluetooth (or until Nvidia releases a ROM with decent bluetooth support), it's just not going to work, and there's nothing we can do to change that.
Click to expand...
Click to collapse
Thank you for your definite answer! Anyway I now understand what is going on with Tegra Note7, and I have substituted DS3 for wamo pro2 .I hope it can function on my device via bluetooth.

generalradec said:
Thank you for your definite answer! Anyway I now understand what is going on with Tegra Note7, and I have substituted DS3 for wamo pro2 .I hope it can function on my device via bluetooth.
Click to expand...
Click to collapse
The 4.4 Update is supposed to address controller usage.

e8hffff said:
The 4.4 Update is supposed to address controller usage.
Click to expand...
Click to collapse
Yeah,wamoPro can work on TN7 via BT now.But there is a pity for Sixaxis controller still not functioning in TN7.

I've had some success using the USB/BT Joystick Center app with an otg cable and a Bluetooth dongle.
Sent from my TegraNote-P1640 using Tapatalk

PS3 SixAxis controller - USB/BT Joystick Center
yes USB/BT Joystick Center GOLD worked wired with PS3 sony.
H T T P jaredmorgs.github.io/#FAQ_PS3_Sixaxis
Wireless PS need dongle CSR bluetooth

Ragnorok64 said:
I've had some success using the USB/BT Joystick Center app with an otg cable and a Bluetooth dongle.
Sent from my TegraNote-P1640 using Tapatalk
Click to expand...
Click to collapse
Please send Link of bluetooth dongle and USB-BT apk version

anilmaurya said:
Please send Link of bluetooth dongle and USB-BT apk version
Click to expand...
Click to collapse
Not 100% sure what you're asking for but hopefully this is it.
http://www.ebay.com/itm/321254758547?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
https://play.google.com/store/apps/details?id=com.poke64738.usbjoygolddemo
https://play.google.com/store/apps/details?id=com.poke64738.usbjoygold
I can't get it to work as consistently on my tablet as Better DS3 works on my PC though.

rchrdcrg said:
There's really nothing to figure out. The bluetooth stack on the stock ROM just doesn't work with PS3 controllers. Until someone can make a custom ROM with some sort of changes to bluetooth (or until Nvidia releases a ROM with decent bluetooth support), it's just not going to work, and there's nothing we can do to change that.
Click to expand...
Click to collapse
Any Idea if this is actually possible? sitting with a rooted TN7 which I spent a while figuring out how to root (not particularly learned in android atm) and pretty pissed off that my dreams of having a nice practical ghetto shield without cables have been crushed.

admiralaverage said:
Any Idea if this is actually possible? sitting with a rooted TN7 which I spent a while figuring out how to root (not particularly learned in android atm) and pretty pissed off that my dreams of having a nice practical ghetto shield without cables have been crushed.
Click to expand...
Click to collapse
It's technically possible, but there has been almost no developer interest in this device. There are no custom ROMs available, and there's only one alternative kernel available, though I never did try a Sixaxis with that kernel... I do know that it broke support for my Moga, so that's not exactly promising. I'll have to give the Sixaxis a try here in a bit.

rchrdcrg said:
It's technically possible, but there has been almost no developer interest in this device. There are no custom ROMs available, and there's only one alternative kernel available, though I never did try a Sixaxis with that kernel... I do know that it broke support for my Moga, so that's not exactly promising. I'll have to give the Sixaxis a try here in a bit.
Click to expand...
Click to collapse
Assuming you mean shaky156 kernel I can confirm that it doesn't help the bluetooth issue

Just tried the latest version of Sixaxis with the latest OTA. And it seems to finally work on the built in blutooth stack without a usb dongle!

New Firmware MO0205-TS

Hi all,
it seems like there is finally a new firmware available, you can grab it HERE.
Did somebody try it out? Is it KitKat? And does it have Ouya Everywhere?

Yes it has Oyua everywhere and also 4k support but it's still 4.2.2
Also rooting with Modaco broke my Wi-Fi
Gesendet von meinem Moto G mit Tapatalk

firmware
That firmware was installed on my MOJO when I rooted it on Saturday. I don't have alot of experience, but the only problem I can report is some streaming issues with SD content over WiFi.

Already rooted
Hi, someone tried to install in already rooted MOJO?
it is safe?

saenta said:
Yes it has Oyua everywhere and also 4k support but it's still 4.2.2
Also rooting with Modaco broke my Wi-Fi
Gesendet von meinem Moto G mit Tapatalk
Click to expand...
Click to collapse
Still 4.2.2? Did you root using Modaco after the upgrade? Why would they not upgrade to 4.4.2 just like every other box out there at this point? No changelog for this firmware either?

saenta said:
Yes it has Oyua everywhere and also 4k support but it's still 4.2.2
Also rooting with Modaco broke my Wi-Fi
Gesendet von meinem Moto G mit Tapatalk
Click to expand...
Click to collapse
If you haven't done so, in order to restore WiFi, you must do a factory reset. Sucks, but it is the only fix I was able to find.

ExtremeRyno said:
If you haven't done so, in order to restore WiFi, you must do a factory reset. Sucks, but it is the only fix I was able to find.
Click to expand...
Click to collapse
I rooted with towelroot, now everything is working fine except Watchever (crashing when starting video)

Does installing this do a full wipe? And do you lose root? I don't care about wifi.. I'm hardwired.
---------- Post added 25th June 2014 at 12:15 AM ---------- Previous post was 24th June 2014 at 11:15 PM ----------
To answer my own questions - no, it does not do a wipe. Yes, you do lose root.
Rerooting worked. I did not test wifi. If wifi is breaking for some people, I imagine the problem might be that the root process looks like it's just flashing a kernel. Without kernel modules (usually part of a rom), wifi and other stuff (power saving etc) sometimes fail from a mismatch. We might need a current root kernel to flash.

wow, good news!
I wonder why MCZ haven't announced it already
I'm guessing public testing..root update..
Shame it's not kitkat tho:crying: but still great to get ouya everywhere and 4k display option :highfive:

I see some changes:
- HDMI 4K2K option.
- Better compatibility in Google Play without root.
- Ouya store. But It didn´t work yesterday.

mjenny82 said:
Hi all,
it seems like there is finally a new firmware available, you can grab it HERE.
Did somebody try it out? Is it KitKat? And does it have Ouya Everywhere?
Click to expand...
Click to collapse
I thought MCZ would be pushing updates out automatically? I'm fairly certain I registered mine when I first set it up.

Kiname said:
Hi, someone tried to install in already rooted MOJO?
it is safe?
Click to expand...
Click to collapse
I answer my self, updated and rooted with Modaco without problems, everything working, except OUYA but i think that servers are down.

Can someone please tell me how to install this?
Do I just put it in the root directory?
Do I have to download all the files or only the one from 6/14?

mokdakid said:
Can someone please tell me how to install this?
Do I just put it in the root directory?
Do I have to download all the files or only the one from 6/14?
Click to expand...
Click to collapse
Go HERE, click 5 times the "next" button, then follow the instructions.

Elnef said:
I see some changes:
- HDMI 4K2K option.
- Better compatibility in Google Play without root.
- Ouya store. But It didn´t work yesterday.
Click to expand...
Click to collapse
I just noticed a few things
-Can get root back if you use the towel root v1
-Ouya store is now working: I was able to setup an account but it did ask me for root.
-Bluetooth works better: I have a bluetooth keyboard paired with it. Before I had to manually connect it but now I just turn on the keyboard and it picked it up instantly.

gwaldo said:
wow, good news!
I wonder why MCZ haven't announced it already
I'm guessing public testing..root update..
Shame it's not kitkat tho:crying: but still great to get ouya everywhere and 4k display option :highfive:
Click to expand...
Click to collapse
I'm not really sure about how the android updates work -- especially in regards to each individual micro-console -- but if the versions you get are more or less the same as on the Shield, I think I'd count myself lucky that you haven't been updated to KitKat yet. On the Shield, many of the emulators seem to have a permanent slight stutter now, whereas before on Jelly bean, they apparently ran very smooth (this is Hearsay from around the forums, as I just got my Shield about a week ago. I can attest that quite a few of the emus stutter though.) As someone who mainly uses these consoles for emulation purposes, it's quite a let down, and I've even thought of switching my Shield out for a Mojo because of it (that's not the only reason, but a major one.) Having Ouya Everywhere available is another reason I'd like to switch; not sure Nvidia will ever get one board with it.

Seilan said:
I think I'd count myself lucky that you haven't been updated to KitKat yet.
Click to expand...
Click to collapse
We need an upgrade from 4.2.2, even if it's to 4.3 for BT4 stack and remove the USB dongle and for also openGL ES3 (4.2.2 is 2.2 and getting old)

gwaldo said:
We need an upgrade from 4.2.2, even if it's to 4.3 for BT4 stack and remove the USB dongle and for also openGL ES3 (4.2.2 is 2.2 and getting old)
Click to expand...
Click to collapse
Yes, this would be great. I just want to be able to get rid of the dongle to free up a USB port. This would be a great improvement

incompatible list through the roof
Has anyone else noticed since this latest update the incompatible list of games has gone through the roof. Literally only about 20% of what I used to have on the mojo will reinstall, the rest just have the your devise is incompatible message. I've tried deleting my data files and clearing the catch to see if it helped out but nothing.
Once step forwards two steps back. Sigh
Edit: i was able to force Blitz brigade to install, accessing my google account via a desktop and selecting blitz brigade to install to mojo (u have to make sure your using wifi not using the ethernet on the mojo) this auto started the install on the mojo. This was one of the games which used to be compatible but is now showing as incompatible on my mojo.
This trick didnt work for nova 3 or modern combat 5 so appears to be rather hit and miss
Off topic but if you havent got MC5 yet get it jumped on bounds since mc4, the control system has improved dramatically from all the other mc games and it wasnt particularly bad on them to begin with. Not played it online yet but the solo mode has been pretty epic, works really well with the c.t.r.l.r and the sixaxis pads the apk has them both mapped to work straight out the box.

Ash180287 said:
Has anyone else noticed since this latest update the incompatible list of games has gone through the roof. Literally only about 20% of what I used to have on the mojo will reinstall, the rest just have the your devise is incompatible message. I've tried deleting my data files and clearing the catch to see if it helped out but nothing.
Once step forwards two steps back. Sigh
Click to expand...
Click to collapse
Did you re-rooted after applying the latest update?
Thanks for the info on MC5, it's defiantly on my radar!

IR remote for Shield TV with Full Android 5.1

Hello,
unfortunately I can't post direct to the thread of the Full Android 5.1 rom for the nvidia shield TV.
With this rom wifi for the original remote is disabled.
Therefore I'm looking for a replacement which should be quite small like the original one.
Could someone suggest one which I can use together with Plex. I know I can use DroidMote but I don't have an Android mobile phone (I'm using iPhone 5s).
An IR-keyboard is working but it's to big which I have.
So I someone can suggest one it would be grateful. Or does anybody know how I can get an Apple remote working with Android 5.1?
Thanks in advance
Huberer

After some searching I found a suggestion about using an Amazon Fire TV Stick remote. There's also a youtube video which shows how to set up. Now I made my decision and bought this remote.
Just for info.

If someone is interested. Here is the youtube-video which I mentioned before.

Thanks for the video link mate.

You're welcome. Got my remote yesterday and installed it within seconds. Works perfect.

Redmi note 7 - ps4 controller

Hello I really need some insight with this. I just bought an otg cable for pairning my redmi note 7 with my ps4 controller because I couldnt fix the input delay via blutooth and the continuous connect fix was not working for me(with both new and old version of the program) . When I paired the controller with the cable nothing happened, I then tried with my ps3 controller again nothing happened.They just charge and that's it, no inputs. When i put a mouse on the otg cable the mouse worked normally. When I tried it with my friend's Mi9t everything worked fine ! I tried the USB debugging settings etc, still the same. Is there any way to fix this?

i haven't tried it myself but maybe this could help you :
https://in.c.mi.com/thread-221458-1-1.html

Thanks I will try this when I get off work and will post the results. I hope this works cause I use my device as an emulation station and this is a big problem for me.

Tsibosp said:
...and the continuous connect fix was not working for me(with both new and old version of the program) .
Click to expand...
Click to collapse
What program are you using and what ROM?
Sent from my lavender using XDA Labs

hello, I used the Bluetooth Auto Connect (both the most recent version and an old one which some people said that works better) with no luck. Everything works as it should for a minute or so and then lags kick in and everything is unplayable. I use the most recent MIUI Global 10.3.10. Waiting for thw MIUI 11 update any day now.

EgyBob said:
i haven't tried it myself but maybe this could help you :
https://in.c.mi.com/thread-221458-1-1.html
Click to expand...
Click to collapse
Hey it kinda works that way. I mean you have to set it up time after time, after time but it works. So it is the same uncompatibility with the ps4 controller the owners of K20 and K20 Pro are posting about, I just cant figure out why it works fine via bluetooth(minus the insane lag) and not with the otg cable. It's a pain in the ass to set it all over again every time you need to play something in an emulator, but hey, it works I guess. I really hope they will fix this with the imminent MIUI 11 and add native support of the ps4 controller on this model cause I will be forced to sell it and I really like my note 7. Thanks again for your help!

Tsibosp said:
Hey it kinda works that way. I mean you have to set it up time after time, after time but it works. So it is the same uncompatibility with the ps4 controller the owners of K20 and K20 Pro are posting about, I just cant figure out why it works fine via bluetooth(minus the insane lag) and not with the otg cable. It's a pain in the ass to set it all over again every time you need to play something in an emulator, but hey, it works I guess. I really hope they will fix this with the imminent MIUI 11 and add native support of the ps4 controller on this model cause I will be forced to sell it and I really like my note 7. Thanks again for your help!
Click to expand...
Click to collapse
no problem , happy to help.
as i said before , i haven't tried it myself but maybe someone else can help with that other issue .
you can also post on xiaomi's reddit thread , maybe someone have a solution for it .

ghst7 said:
What program are you using and what ROM?
Sent from my lavender using XDA Labs
Click to expand...
Click to collapse
hello, I used the Bluetooth Auto Connect (both the most recent version and an old one which some people said that works better) with no luck. Everything works as it should for a minute or so and then lags kick in and everything is unplayable. I use the most recent MIUI Global 10.3.10. Waiting for the MIUI 11 update any day now.

The last time I used my Xbox One S controller was fine (I know its not your case) but I flashed a module from magisk to use it, and I see one for the ps4 controllers in the repos. Maybe it helps?

Tatoh said:
The last time I used my Xbox One S controller was fine (I know its not your case) but I flashed a module from magisk to use it, and I see one for the ps4 controllers in the repos. Maybe it helps?
Click to expand...
Click to collapse
do you have to be rooted for that? I run official MIUI 10, soon 11. I really dont want to bother with roots, custom APKs etc.

Tsibosp said:
Hello I really need some insight with this. I just bought an otg cable for pairning my redmi note 7 with my ps4 controller because I couldnt fix the input delay via blutooth and the continuous connect fix was not working for me(with both new and old version of the program) . When I paired the controller with the cable nothing happened, I then tried with my ps3 controller again nothing happened.They just charge and that's it, no inputs. When i put a mouse on the otg cable the mouse worked normally. When I tried it with my friend's Mi9t everything worked fine ! I tried the USB debugging settings etc, still the same. Is there any way to fix this?
Click to expand...
Click to collapse
i just bought an otg cable and i'm facing the same problem as you , did you fix it yet ?
if so please share the solution . thanks in advance.

EgyBob said:
i just bought an otg cable and i'm facing the same problem as you , did you fix it yet ?
if so please share the solution . thanks in advance.
Click to expand...
Click to collapse
https://in.c.mi.com/thread-221458-1-1.html
It works for me this way but you have to set it up every time and it's kinda annoying. Sometimes it takes a minute or two once im in the emulators to recognise the control schemes.

Tsibosp said:
https://in.c.mi.com/thread-221458-1-1.html
It works for me this way but you have to set it up every time and it's kinda annoying. Sometimes it takes a minute or two once im in the emulators to recognise the control schemes.
Click to expand...
Click to collapse
i tried that method but the controller ps3 isn't being detected by the phonenor in the app -when i connect it it says "device is dead" , and the ps4 controller is detected in the app but not in game nor controlling the phone/home screen .
which controller is working for you ? is it working for you outside the emulator games ? if so , which games ?
and btw , is your phone rooted or not ?

EgyBob said:
i tried that method but the controller ps3 isn't being detected by the phonenor in the app -when i connect it it says "device is dead" , and the ps4 controller is detected in the app but not in game nor controlling the phone/home screen .
which controller is working for you ? is it working for you outside the emulator games ? if so , which games ?
and btw , is your phone rooted or not ?
Click to expand...
Click to collapse
Im using the PS4 controller. Sadly my PS3 controller is busted and I cannot test it in order to help you. Yes it is working outside of games with the method described above. You just use it as an alternative input method, so in other words you forfeit the keyboard and you use the controller as an input method. You cannot use the keyboard at the same time and after you disconnect the controller you need to reverse the default input method back to the keyboard in order to use the phone. Its not plug and play, you have to set it every time as I mentioned above but at least it works this way with little to no lag. I have tried it with Mame, Epsxe, Retroarch, PPSSPP, everything works I had no problems with any of the games I tried. My redmi Note 7 is not rooted and runs all the latest updates.

Tsibosp said:
Im using the PS4 controller. Sadly my PS3 controller is busted and I cannot test it in order to help you. Yes it is working outside of games with the method described above. You just use it as an alternative input method, so in other words you forfeit the keyboard and you use the controller as an input method. You cannot use the keyboard at the same time and after you disconnect the controller you need to reverse the default input method back to the keyboard in order to use the phone. Its not plug and play, you have to set it every time as I mentioned above but at least it works this way with little to no lag. I have tried it with Mame, Epsxe, Retroarch, PPSSPP, everything works I had no problems with any of the games I tried. My redmi Note 7 is not rooted and runs all the latest updates.
Click to expand...
Click to collapse
thanks for the respond , i got the ps4 controller to work in the emulator PPSSPP . although that's not what i was trying to solve , i wanted to use the controller in games/apps -the ones you download from the play store like FIFA,NFS etc.. - outside the emulator. but i think i'll have to root my phone to remap the touch control for these games.
i'll have to wait for a week to unlock the bootloader then i'll try again after rooting.
thanks again bro <3