Hello everyone. I just upgraded from my s3 and got an s4 model (sgh-i337m) ive been trying to root it but im not sure what method is used for my carrier since im from Puerto Rico and its from "claro" on the latest OTA update..Ive read its the same as the Canadian version but i want to be sure and not have a new brick lol hope anyone can help me with this. Thanks
P.D its on 4.2.2
Baseband: I337MUMUAMG3
Kernel: 3.4.0-1163001
Build number: JDQ39
Selinux status: permissive
Sent from my SGH-I337M using xda premium
I am on the same boat... I do have this device since a month. Had it rooted with motochopper with out-of-the-box firmware PDA: I337MUMUAMDJ Changelist: 518267 Android: 4.2.2 then unrooted to do the OTA update to the latest released firmware PDA: I337MUMUAMG3 Changelist: 1163001 Android: 4.2.2
Now I tried the motochopper again and it says "failed" and/or that su binary is outdated ??? Do not know what it means, only that don't have su permission. Under about device it does reads "SELinux status: Persmissive" with Baseband version: I337MUMUAMG3
Does the Baseband is locked or what? I do not know a lot... please help! Thanks in advance.
Jose0726 said:
i want to be sure and not have a new brick lol hope anyone can help me with this. Thanks
Click to expand...
Click to collapse
Do the MG1 CF-AutoRoot
http://forum.xda-developers.com/showthread.php?t=2293800
Confirmed to work on MG3
bhp's method here is confirmed working on all i337m variants as well:
http://forum.xda-developers.com/showthread.php?t=2298299
xBeerdroiDx said:
bhp's method here is confirmed working on all i337m variants as well
Click to expand...
Click to collapse
I do tried it. Just output failure message at the end. Had to use CF-AutoRoot instead...
Hello.
I have a note 3 from at&t I bought of ebay, this is the information of the phone:
Model Number SM-N900A
Version 4.3
Baseband version N900AUCUBMJ5
Kernel version 3.4.0-1625098
Build number Jss15j.n900aucubmj5
I tryed using ODIN, I tryed using Kingo with few versions and it keep failing.
I want to root to add hebrew to my phone.
What rooting method should I use?
Thanks.
Josef.
josef19 said:
Hello.
I have a note 3 from at&t I bought of ebay, this is the information of the phone:
Model Number SM-N900A
Version 4.3
Baseband version N900AUCUBMJ5
Kernel version 3.4.0-1625098
Build number Jss15j.n900aucubmj5
I tryed using ODIN, I tryed using Kingo with few versions and it keep failing.
I want to root to add hebrew to my phone.
What rooting method should I use?
Thanks.
Josef.
Click to expand...
Click to collapse
Hey
Go to the AT&T specific forum
http://forum.xda-developers.com/note-3-att
I want a root and have bad kernel who dont allow root whit toelroot.
I installed firmware from neighborhood country whit same kernel.
What if i want to return in my FW ? Will be trigger knox ? Will be have some problem ?
I upgrade from this:
Model: SM-N9005
Model name: GALAXY Note 3 LTE
Country: Macedonia (T-Mobile)
Version: Android 4.4.2
Changelist: 636608
Build date: Mon, 10 Mar 2014 04:43:36 +0000
Product Code: MBM
PDA: N9005XXUENC3
CSC: N9005MBMENC1
MODEM: N9005XXUENC2
To this :
Model: SM-N9005
Model name: GALAXY Note 3 LTE
Country: Bosnia and Herzegovina (BH TELECOM)
Version: Android 4.4.2
Changelist: 1168347
Build date: Mon, 14 Apr 2014 08:38:48 +0000
Product Code: BHT
PDA: N9005XXUEND3
CSC: N9005BHTENE2
MODEM: N9005XXUENC2
Please some experienced guy to tell me is it posible.
Thanks for any help.
zelenko said:
I want a root and have bad kernel who dont allow root whit toelroot.
I installed firmware from neighborhood country whit same kernel.
What if i want to return in my FW ? Will be trigger knox ? Will be have some problem ?
I upgrade from this:
Model: SM-N9005
Model name: GALAXY Note 3 LTE
Country: Macedonia (T-Mobile)
Version: Android 4.4.2
Changelist: 636608
Build date: Mon, 10 Mar 2014 04:43:36 +0000
Product Code: MBM
PDA: N9005XXUENC3
CSC: N9005MBMENC1
MODEM: N9005XXUENC2
To this :
Model: SM-N9005
Model name: GALAXY Note 3 LTE
Country: Bosnia and Herzegovina (BH TELECOM)
Version: Android 4.4.2
Changelist: 1168347
Build date: Mon, 14 Apr 2014 08:38:48 +0000
Product Code: BHT
PDA: N9005XXUEND3
CSC: N9005BHTENE2
MODEM: N9005XXUENC2
Please some experienced guy to tell me is it posible.
Thanks for any help.
Click to expand...
Click to collapse
I think ur bootloader has been upgraded as well.
if the same ND shld be no problem. but from ND to Nc, i dun think can.
because earlier I upgrade to nd3 bootloader, and when I flash nc2 custom rom, it got problem bootloop nd when I can go through home screen, FC everywhere freeze nd reboot.
Sent from somewhere under the sky, at the corner of this rounded earth.
antique_sonic said:
I think ur bootloader has been upgraded as well.
if the same ND shld be no problem. but from ND to Nc, i dun think can.
because earlier I upgrade to nd3 bootloader, and when I flash nc2 custom rom, it got problem bootloop nd when I can go through home screen, FC everywhere freeze nd reboot.
Sent from somewhere under the sky, at the corner of this rounded earth.
Click to expand...
Click to collapse
Except bootloop is any chance to activate knox ? I want to try, if i get bootloop i will flash again second FW.
Only thing who scare me is a triggering knox.
I have problem whit active memo and direct pen.
When i flash second FW and root he functional normaly. Instal xposed and wanam xposed working good.
But when i install adaway, lg g3 keyboard and some aplication then my active memo and direct pen stop working.
This is second time i reflash other FW
I know some will say dont instal this conflict apk but i dont know what app in future may couse problem and i dont have to return backup.
I cant reflash any time when i get problem.
What in you opinion is good FW to flash ?
zelenko said:
Except bootloop is any chance to activate knox ? I want to try, if i get bootloop i will flash again second FW.
Only thing who scare me is a triggering knox.
I have problem whit active memo and direct pen.
When i flash second FW and root he functional normaly. Instal xposed and wanam xposed working good.
But when i install adaway, lg g3 keyboard and some aplication then my active memo and direct pen stop working.
This is second time i reflash other FW
I know some will say dont instal this conflict apk but i dont know what app in future may couse problem and i dont have to return backup.
I cant reflash any time when i get problem.
What in you opinion is good FW to flash ?
Click to expand...
Click to collapse
Sorry, my english is not so good, because now I'm a bit confused. Earlier you were saying you want to try TowerRoot ?
and now you are sayin that you have root already, with a working xposed & wanam ?
So, basically, you have a rooted firmware already ? Then why do you need TowelRoot ?
Isn't it if you have working root on KK (existing firmware), means your KNOX tripped ? Because if it does, reflashing firmware / rerooting with TowelRoot won't help your KNOX warranty bit.
But, answering to your question, flashing original firmware won't trip the KNOX (if your KNOX still 0x0), bcause, KNOX will only trip if the system being injected / flashed with 3rd party system file which is not digitally signed by Samsung.
antique_sonic said:
Sorry, my english is not so good, because now I'm a bit confused. Earlier you were saying you want to try TowerRoot ?
and now you are sayin that you have root already, with a working xposed & wanam ?
So, basically, you have a rooted firmware already ? Then why do you need TowelRoot ?
Isn't it if you have working root on KK (existing firmware), means your KNOX tripped ? Because if it does, reflashing firmware / rerooting with TowelRoot won't help your KNOX warranty bit.
But, answering to your question, flashing original firmware won't trip the KNOX (if your KNOX still 0x0), bcause, KNOX will only trip if the system being injected / flashed with 3rd party system file which is not digitally signed by Samsung.
Click to expand...
Click to collapse
You english is good, i cant explain good
In first FW i cant get root becouse is norooted kernel whit towelroot.
thats why i instal second FW whit rootable kernel.
But now i have problem whit spen app just explained in my post below.
I found that modet apk LG G3 is causing to action memo and direct pen to stop working.
After wipe apk whit titanium backup all work now like charm.
Thanks for antique_sonic who is try to help.
zelenko said:
You english is good, i cant explain good
In first FW i cant get root becouse is norooted kernel whit towelroot.
thats why i instal second FW whit rootable kernel.
But now i have problem whit spen app just explained in my post below.
Click to expand...
Click to collapse
I've just saw your reply.
zelenko said:
I found that modet apk LG G3 is causing to action memo and direct pen to stop working.
After wipe apk whit titanium backup all work now like charm.
Thanks for antique_sonic who is try to help.
Click to expand...
Click to collapse
u r welcome
Hi all
I have just updated my Note 3, SM-9005 phone to android 5.0. This update was sent to my phone not through a manual update.
After the update I have found lots of things i dont like and would like to change.
Please can anyone tell me if i can root my phone and if there are any steps to do this.
model number - SM-9005
Android Ver - 5.0
Baseband ver - N9005xxugbod1
kernel ver - 3.4.0-4540543
[email protected] #1
Thur April 16 22:06:54 KST 2015
Build ver - LRX21V.N9005XXUGBOD6
thanks all
If you want make a root you must downgrade to KK, use towelroot and update to 5.0 with mobile odin pro
Sent from Galaxy Note
CF Auto root
lifestoshort said:
Hi all
I have just updated my Note 3, SM-9005 phone to android 5.0. This update was sent to my phone not through a manual update.
After the update I have found lots of things i dont like and would like to change.
Please can anyone tell me if i can root my phone and if there are any steps to do this.
model number - SM-9005
Android Ver - 5.0
Baseband ver - N9005xxugbod1
kernel ver - 3.4.0-4540543
[email protected] #1
Thur April 16 22:06:54 KST 2015
Build ver - LRX21V.N9005XXUGBOD6
thanks all
Click to expand...
Click to collapse
search for "CF Auto root Note 3 Lollipop". I used that thread to do...
Root your device with CF-Auto ONLY if you have already tripped your e-fuse!
Yeah I forgot that... It'll trigger Knox.. which I never cared about...
How can I root this so as to use dr fone to recover deleted audio files i need for court? I downloaded arabic tool but its for ob6 and of1 which i honestly dont know much about. any proven experience would be most appreciated!
My phone says its
SM-N900V
Android version 5
Baseband N900vvrSEPL1
Kernel Version 3.4.0
[email protected] #1
Wed Dec 14 15:56:59 KST 2016
Build # LRX21V.N900VVRSEPL1
Enforcing
SEPF_SM-900V_5.0_0051
Hardware version: N900v.07
Security v1.0 Release4
VPN v 1.4 release 4
Asks v1.2 _161011
Knox Version2.3
Configuration version B13.Sam.SMN900V.0
Have the same exact problem. Nobody is answering...
record=E930D4F2233B11E6949E0CC47A44B7B2this[/url] worked perfect for me change your OS back to OF1 with this link is a good download of it and flash with Odin
I'm also interested in rooting my verizon note 3. But I don't understand how to use the link provided for changing back to OF1.
My note 3 Baseband version after a recent update still reads N900VVRUEOF1, while the Build number is LRX21V.N900VVRSEPL1.