I want a root and have bad kernel who dont allow root whit toelroot.
I installed firmware from neighborhood country whit same kernel.
What if i want to return in my FW ? Will be trigger knox ? Will be have some problem ?
I upgrade from this:
Model: SM-N9005
Model name: GALAXY Note 3 LTE
Country: Macedonia (T-Mobile)
Version: Android 4.4.2
Changelist: 636608
Build date: Mon, 10 Mar 2014 04:43:36 +0000
Product Code: MBM
PDA: N9005XXUENC3
CSC: N9005MBMENC1
MODEM: N9005XXUENC2
To this :
Model: SM-N9005
Model name: GALAXY Note 3 LTE
Country: Bosnia and Herzegovina (BH TELECOM)
Version: Android 4.4.2
Changelist: 1168347
Build date: Mon, 14 Apr 2014 08:38:48 +0000
Product Code: BHT
PDA: N9005XXUEND3
CSC: N9005BHTENE2
MODEM: N9005XXUENC2
Please some experienced guy to tell me is it posible.
Thanks for any help.
zelenko said:
I want a root and have bad kernel who dont allow root whit toelroot.
I installed firmware from neighborhood country whit same kernel.
What if i want to return in my FW ? Will be trigger knox ? Will be have some problem ?
I upgrade from this:
Model: SM-N9005
Model name: GALAXY Note 3 LTE
Country: Macedonia (T-Mobile)
Version: Android 4.4.2
Changelist: 636608
Build date: Mon, 10 Mar 2014 04:43:36 +0000
Product Code: MBM
PDA: N9005XXUENC3
CSC: N9005MBMENC1
MODEM: N9005XXUENC2
To this :
Model: SM-N9005
Model name: GALAXY Note 3 LTE
Country: Bosnia and Herzegovina (BH TELECOM)
Version: Android 4.4.2
Changelist: 1168347
Build date: Mon, 14 Apr 2014 08:38:48 +0000
Product Code: BHT
PDA: N9005XXUEND3
CSC: N9005BHTENE2
MODEM: N9005XXUENC2
Please some experienced guy to tell me is it posible.
Thanks for any help.
Click to expand...
Click to collapse
I think ur bootloader has been upgraded as well.
if the same ND shld be no problem. but from ND to Nc, i dun think can.
because earlier I upgrade to nd3 bootloader, and when I flash nc2 custom rom, it got problem bootloop nd when I can go through home screen, FC everywhere freeze nd reboot.
Sent from somewhere under the sky, at the corner of this rounded earth.
antique_sonic said:
I think ur bootloader has been upgraded as well.
if the same ND shld be no problem. but from ND to Nc, i dun think can.
because earlier I upgrade to nd3 bootloader, and when I flash nc2 custom rom, it got problem bootloop nd when I can go through home screen, FC everywhere freeze nd reboot.
Sent from somewhere under the sky, at the corner of this rounded earth.
Click to expand...
Click to collapse
Except bootloop is any chance to activate knox ? I want to try, if i get bootloop i will flash again second FW.
Only thing who scare me is a triggering knox.
I have problem whit active memo and direct pen.
When i flash second FW and root he functional normaly. Instal xposed and wanam xposed working good.
But when i install adaway, lg g3 keyboard and some aplication then my active memo and direct pen stop working.
This is second time i reflash other FW
I know some will say dont instal this conflict apk but i dont know what app in future may couse problem and i dont have to return backup.
I cant reflash any time when i get problem.
What in you opinion is good FW to flash ?
zelenko said:
Except bootloop is any chance to activate knox ? I want to try, if i get bootloop i will flash again second FW.
Only thing who scare me is a triggering knox.
I have problem whit active memo and direct pen.
When i flash second FW and root he functional normaly. Instal xposed and wanam xposed working good.
But when i install adaway, lg g3 keyboard and some aplication then my active memo and direct pen stop working.
This is second time i reflash other FW
I know some will say dont instal this conflict apk but i dont know what app in future may couse problem and i dont have to return backup.
I cant reflash any time when i get problem.
What in you opinion is good FW to flash ?
Click to expand...
Click to collapse
Sorry, my english is not so good, because now I'm a bit confused. Earlier you were saying you want to try TowerRoot ?
and now you are sayin that you have root already, with a working xposed & wanam ?
So, basically, you have a rooted firmware already ? Then why do you need TowelRoot ?
Isn't it if you have working root on KK (existing firmware), means your KNOX tripped ? Because if it does, reflashing firmware / rerooting with TowelRoot won't help your KNOX warranty bit.
But, answering to your question, flashing original firmware won't trip the KNOX (if your KNOX still 0x0), bcause, KNOX will only trip if the system being injected / flashed with 3rd party system file which is not digitally signed by Samsung.
antique_sonic said:
Sorry, my english is not so good, because now I'm a bit confused. Earlier you were saying you want to try TowerRoot ?
and now you are sayin that you have root already, with a working xposed & wanam ?
So, basically, you have a rooted firmware already ? Then why do you need TowelRoot ?
Isn't it if you have working root on KK (existing firmware), means your KNOX tripped ? Because if it does, reflashing firmware / rerooting with TowelRoot won't help your KNOX warranty bit.
But, answering to your question, flashing original firmware won't trip the KNOX (if your KNOX still 0x0), bcause, KNOX will only trip if the system being injected / flashed with 3rd party system file which is not digitally signed by Samsung.
Click to expand...
Click to collapse
You english is good, i cant explain good
In first FW i cant get root becouse is norooted kernel whit towelroot.
thats why i instal second FW whit rootable kernel.
But now i have problem whit spen app just explained in my post below.
I found that modet apk LG G3 is causing to action memo and direct pen to stop working.
After wipe apk whit titanium backup all work now like charm.
Thanks for antique_sonic who is try to help.
zelenko said:
You english is good, i cant explain good
In first FW i cant get root becouse is norooted kernel whit towelroot.
thats why i instal second FW whit rootable kernel.
But now i have problem whit spen app just explained in my post below.
Click to expand...
Click to collapse
I've just saw your reply.
zelenko said:
I found that modet apk LG G3 is causing to action memo and direct pen to stop working.
After wipe apk whit titanium backup all work now like charm.
Thanks for antique_sonic who is try to help.
Click to expand...
Click to collapse
u r welcome
Related
I want to upgrade my wife's s4 i9500 wanamlite 4.3 ROM
This time I want to try a not modded rom
Need advice please - If I'm choosing the right way to a new stock firmware + ROOT AND RECOVERY :
1. Is this firmware suitable ? for Israel ?
http://www.sammobile.com/firmwares/3/?download=31706
Model: GT-I9500
Model name: GALAXY S4
Country: Germany
Version: Android 4.4.2
Changelist: 699287
Build date: Wed, 28 May 2014 14:23:46 +0000
Product Code: MBC
PDA: I9500XXUFNE7
CSC: I9500MBCFNE1
MODEM: I9500XXUFNA6
2. then,after the stock firmware ODIN installation
ROOT : http://download.chainfire.eu/326/CF-R...
CWM Recovery :- http://d-h.st/2Iu (Odin Version)
Is this two steps = 100% what is needed ?
& Also :
3. I see that Modded ROMs are >> Deodexed / Zipaligned converted
What Actually is the difference ? is it a Must ? for fast & good battery usage... etc.
4. and finally ( regardless to the stock base firmware etc. ) - Just a general question : What CSC is usually recommended when there is no unic one to your country ?
we are from Israel and when I used UK CSC - the Phone No. structure has been change
Many THX ( in advance )
:good:
.
yaronAD said:
I want to upgrade my wife's s4 i9500 wanamlite 4.3 ROM
This time I want to try a not modded rom
Need advice please - If I'm choosing the right way to a new stock firmware + ROOT AND RECOVERY :
1. Is this firmware suitable ? for Israel ?
http://www.sammobile.com/firmwares/3/?download=31706
Model: GT-I9500
Model name: GALAXY S4
Country: Germany
Version: Android 4.4.2
Changelist: 699287
Build date: Wed, 28 May 2014 14:23:46 +0000
Product Code: MBC
PDA: I9500XXUFNE7
CSC: I9500MBCFNE1
MODEM: I9500XXUFNA6
2. then,after the stock firmware ODIN installation
ROOT : http://download.chainfire.eu/326/CF-R...
CWM Recovery :- http://d-h.st/2Iu (Odin Version)
Is this two steps = 100% what is needed ?
& Also :
3. I see that Modded ROMs are >> Deodexed / Zipaligned converted
What Actually is the difference ? is it a Must ? for fast & good battery usage... etc.
4. and finally ( regardless to the stock base firmware etc. ) - Just a general question : What CSC is usually recommended when there is no unic one to your country ?
we are from Israel and when I used UK CSC - the Phone No. structure has been change
Many THX ( in advance )
:good:
.
Click to expand...
Click to collapse
Hi ,
Regarding 1
Yes, that would be the right firmware for that phone , question what bootloader you have right now , new or old? Go to download mode and see if there is any Knox related info , if there is not then you have the old one , I mention this just because if you have the oldbootloader and flash a stock rom >4.3 there is no way back and any flashing after that it will trip the knox warranty bit
Regarding 2
It depends, why you want a stock rom? You need root for some apps and some mods (as long as there is no flashing and depending in the bootloader no problem with knox) , you need CWM if you intend to flash
Regarding 3
Here you go:
http://forum.xda-developers.com/showthread.php?t=2224570
Main advantage, moding and speed , other than that they are similar
Regarding 4
CSC CustomerSalesCode this has specific information about the carrier and country where the phone is used , language , phone number structure , SMS, MMS , special services offered by carrier…..must custom roms have multiCSC you can change them to the one want ( if you change CSC you will factory reset it ! backup first) , there are app that will do it for you
90% of the time there is no need to do it but if you want this is a great one for that
http://forum.xda-developers.com/showthread.php?t=2709931
CSC codes
http://forum.xda-developers.com/wiki/Csc
MANY THX M8!
:good:
yaronAD said:
MANY THX M8!
:good:
Click to expand...
Click to collapse
Any time.
Good luck
hi
i have n9005 from germany dist. i want N9005XXUEND3 and XEO, so can i just reflash n9005 via Odin with N9005XXUEND3 without trip knox to 0x1 ?
i want N9005XXUEND3 because it's last XEO dist. and towellroot working ok with this ( i know i can flash N9005XXUEND3 kernel -dead wifi- make towelroot and reflash back to previous kernel to enable root).
so to make story shor can i reflash this firmware without fears of 0x1 etc.. ?
As long as you're flashing a stock kernel it wont trip knox
Sent from my SM-N9005 using XDA Free mobile app
i made reflash odin 3.09 firmware N9005XXUEND3_N9005XEOEND2_N9005XXUENC2_HOME.tar.md5 during system.img.ext4 flash i saw info on LCD "invalid percent of drawig...." after this i have knox 0x1, very sad...
Also after reflash i have modem firmware UNKNOWN and i don't have sound at all
psg said:
hi
i have n9005 from germany dist. i want N9005XXUEND3 and XEO, so can i just reflash n9005 via Odin with N9005XXUEND3 without trip knox to 0x1 ?
i want N9005XXUEND3 because it's last XEO dist. and towellroot working ok with this ( i know i can flash N9005XXUEND3 kernel -dead wifi- make towelroot and reflash back to previous kernel to enable root).
so to make story shor can i reflash this firmware without fears of 0x1 etc.. ?
Click to expand...
Click to collapse
You are trying to downgrade from FNG2 to END3 firmware and it is not possible.
That may brick your device
i reflash with N9005XXUFNG2_N9005ATOFNG1_N9005XXUFNG2_HOME.tar.md5 then sound back to work, also during flashing system there was no "invalid ..."
after this i made update via phone menu (intenet+wifi) to latest N9005XXUGNG1_N9005ATOGNG1_N9005XXUGNG1_HOME.tar.md5 but knox 0x1 stayed
then i made root:
flash odin >> KERNEL_N9005XXUEND3.tar.md5 (got custom status) << then use towelroot than flash back to KERNEL_N9005XXUGNG1.tar.md5 and status changed to official .... but knox 0x1 still there...
hi again.
now there is android 5.0. Of course i got info and tried to update phone via wifi but after it download firmware (over 810mb) during recovery flash it end at 29% with ERROR message than suggest to use KIES so can i now use POLAND XEO firmware:
Code:
Model SM-N9005
Model name GALAXY Note 3 LTE
Country Poland
Version Android 5.0
Changelist 3643614
Build date Wed, 25 Feb 2015 12:57:23 +0000
Product code XEO
PDA N9005XXUGBOB6
CSC N9005XEOGBOA4
links are here:
Code:
http://www.sammobile.com/firmwares/download/43864/N9005XXUGBOB6_N9005XEOGBOA4_XEO/
http://www.sammobile.com/firmwares/download/43186/N9005XXUGBOA5_N9005XEOGBOA4_XEO/
if YES, which file should i use B6 or A5 ?
See your identical post .
Help needed!!!I bought s4 from England and then rooted it and installed custom on it(black edition). Now the problem is I want to remove root and install official firmware. Kindly please guide me what should I do so that I don't brick/damage my device. Thanks in advance
Aqib Farooq said:
Help needed!!!I bought s4 from England and then rooted it and installed custom on it(black edition). Now the problem is I want to remove root and install official firmware. Kindly please guide me what should I do so that I don't brick/damage my device. Thanks in advance
Click to expand...
Click to collapse
Hi ,
Just go to
http://www.sammobile.com/firmwares/
Select the official firmware you want ( UK or your country) follow instructions given
Example
http://www.sammobile.com/firmwares/3/?download=34317
Model: GT-I9505
Model name: GALAXY S4 LTE
Country: United Kingdom
Version: Android 4.4.2
Changelist: 2309103
Build date: Wed, 23 Jul 2014 10:16:57 +0000
Product Code: BTU
PDA: I9505XXUGNG8
CSC: I9505BTUGNG2
MODEM: I9505XXUGNG8
Instructions
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
In the case above , after you flash it if you wish to gain root again towelroot will not work (yet) so if you root knox bit will be trip , maybe is already tripped as you have a custom rom now
I've already downloaded this firmware I9505XXUBMGA (4.2.2) : Stock GT-i9505 ROM from sammobile. Can I use this firmware. And then updated it afterwards ota or from kies?
Aqib Farooq said:
I've already downloaded this firmware I9505XXUBMGA (4.2.2) : Stock GT-i9505 ROM from sammobile. Can I use this firmware. And then updated it afterwards ota or from kies?
Click to expand...
Click to collapse
Hi ,
It depends in what firmware you had last , if you had 4.2.2 you can , if you had 4.3 or 4.4.2 yon can not , odin will not let you downgrade
Once you flash stock firmware and your status is stock you can upgrade from kies or ota
Hello
Since the release of kitkat I haven't been able to able update my device and I still have 4.3 version of android on my Note 3 SM-N9005.
Whenever I check for updates it says I have the latest and with kies it says the same thing or says SM-N9005 won't initialize. I heard that I can update manually with odin but I had some questions and fears:
First of all will flashing with odin trigger my knox counter and make it 0x1? I have the Knox app too and working with it keeping my secret information in it.
The other and the most important problem I have is that which frimware should I download? my baseband version is XXUBMI6, and my region (which I checked it from /system/csc/sales_code.dat) is XSI. I am a bit confused with all this stuff and don't know what to do
Thanks in advance for your help please tell me what to do.
mehrdady said:
Hello
Since the release of kitkat I haven't been able to able update my device and I still have 4.3 version of android on my Note 3 SM-N9005.
Whenever I check for updates it says I have the latest and with kies it says the same thing or says SM-N9005 won't initialize. I heard that I can update manually with odin but I had some questions and fears:
First of all will flashing with odin trigger my knox counter and make it 0x1? I have the Knox app too and working with it keeping my secret information in it.
The other and the most important problem I have is that which frimware should I download? my baseband version is XXUBMI6, and my region (which I checked it from /system/csc/sales_code.dat) is XSI. I am a bit confused with all this stuff and don't know what to do
Thanks in advance for your help please tell me what to do.
Click to expand...
Click to collapse
1. Flashing the correct firmware for your device via ODIN DON'T trig KNOX counter. Be relaxed.
2. One of the best method for know your CSC (code of country) is rebooting in STOCK RECOVERY and look close the text: "Applied the CSC-code: XXX" like in the pic attached.
mehrdady said:
Hello
Since the release of kitkat I haven't been able to able update my device and I still have 4.3 version of android on my Note 3 SM-N9005.
Whenever I check for updates it says I have the latest and with kies it says the same thing or says SM-N9005 won't initialize. I heard that I can update manually with odin but I had some questions and fears:
First of all will flashing with odin trigger my knox counter and make it 0x1? I have the Knox app too and working with it keeping my secret information in it.
The other and the most important problem I have is that which frimware should I download? my baseband version is XXUBMI6, and my region (which I checked it from /system/csc/sales_code.dat) is XSI. I am a bit confused with all this stuff and don't know what to do
Thanks in advance for your help please tell me what to do.
Click to expand...
Click to collapse
- Flashing the stock firmware via Odin will not trip the Knox counter, nor erasing your data.
- To find and download the correct firmware for your device:
Open Phone INFO ★Samsung★ app > Menu > 'Firmware Browser'.
The latest one will be on the top of the list.
vndnguyen said:
- Flashing the stock firmware via Odin will not trip the Knox counter, nor erasing your data.
- To find and download the correct firmware for your device:
The latest one will be on the top of the list.
Click to expand...
Click to collapse
Thank you for your help i installed the app and checked it the part you told (firmware browser)
at the top was a firmware with this info:
Model: SM-N9005
Model name: GALAXY Note 3 LTE
Country: United Arab Emirates
Version: Android 4.4.2
Changelist: 1955971
Build date: Tue, 28 Oct 2014 12:20:40 +0000
Product Code: XSI
PDA: N9005XXUGNJ2
CSC: N9005OJVGNH2
MODEM: N9005XXUGNG1
Im downloading it and going to flash it using the instruction written on the sammobile website, will flashing this firmware erase my apps? and I have seen some people that after using this method of flashing their device has lost connection of wifi and cell connection, what if I get this problem too?
mehrdady said:
Thank you for your help i installed the app and checked it the part you told (firmware browser)
at the top was a firmware with this info:
Model: SM-N9005
Model name: GALAXY Note 3 LTE
Country: United Arab Emirates
Version: Android 4.4.2
Changelist: 1955971
Build date: Tue, 28 Oct 2014 12:20:40 +0000
Product Code: XSI
PDA: N9005XXUGNJ2
CSC: N9005OJVGNH2
MODEM: N9005XXUGNG1
Im downloading it and going to flash it using the instruction written on the sammobile website, will flashing this firmware erase my apps? and I have seen some people that after using this method of flashing their device has lost connection of wifi and cell connection, what if I get this problem too?
Click to expand...
Click to collapse
Flashing a stock firmware via Odin will not erase your apps.
I personally doesn't face with wifi and cell connection.
hi guys N gal's, just a quick tutorial on how to gain back you'r country sale's code ."CSC" . hope this help's as i know myself it's a nightmare to try and get it back to stock. so this is what i did . first i downgraded back as far as i could go for root witch is kk ANG, and my firmware. then goto playstore and download super.su and CSC changer, and ez file explorer for downloading towelroot install towelroot. root your phone at own risk. disable knox if it hang's on disabling knox just reboot you'r phone and hit super user again. and knox will show up again disable again it should work this time.done rooted open CSC changer tick with root, and you will see csc codes select you'r code and it will reboot it'self and install your code. this will wipe all your data on your device so beware.now install a fresh new lollipop with YOUR CSC CODE, well that's all folk's the end. hope it work's for you.regard's joe - remove this thread if it's not appropriate. kind regard's,
hit the thank's button if this help's....
Okay, so I installed polish lollipop on my unrooted UK s5, and have now moved to the stock UK version but I'll be damned if I can change the bloody csc back! I take it your method won't work on lollipop?
Robsa said:
Okay, so I installed polish lollipop on my unrooted UK s5, and have now moved to the stock UK version but I'll be damned if I can change the bloody csc back! I take it your method won't work on lollipop?
Click to expand...
Click to collapse
no sorry not as yet. i know it's a pain in da a**, regard's joe
OK, so this is odd: if I do a *#1234# the CSC listed is G900FOXA1BOA4 which is UK, but if I run phone info *Samsung* it still says I'm on Poland CSC, even though it lists the UK CSC?!
So, is G900FOXA1BOA4 UK or Poland? Have I got UK csc or not?!
Robsa said:
OK, so this is odd: if I do a *#1234# the CSC listed is G900FOXA1BOA4 which is UK, but if I run phone info *Samsung* it still says I'm on Poland CSC, even though it lists the UK CSC?!
So, is G900FOXA1BOA4 UK or Poland? Have I got UK csc or not?!
Click to expand...
Click to collapse
Model: SM-G900F
Model name: GALAXY S5
Country: United Kingdom
Version: Android 5.0
Changelist: 77433514
Build date: Wed, 07 Jan 2015 11:18:56 +0000
Product Code: BTU
PDA: G900FXXU1BOA3
CSC: G900FOXA1BOA4
MODEM: G900FXXU1BOA3 ,
Model: SM-G900F
Model name: GALAXY S5
Country: Poland
Version: Android 5.0
Changelist: 77433514
Build date: Thu, 18 Dec 2014 08:40:19 +0000
Product Code: XEO
PDA: G900FXXU1BNL9
CSC: G900FXEO1BNL1
MODEM: G900FXXU1BNL9 . this just abit of info but it is strange, regard's joe.
Thanks Joe. It is odd, when I first booted after updating the ROM the welcome was set to polish, but BOA4 is definitely being listed through *#1234#
Most odd.
Robsa said:
Thanks Joe. It is odd, when I first booted after updating the ROM the welcome was set to polish, but BOA4 is definitely being listed through *#1234#
Most odd.
Click to expand...
Click to collapse
hi bud, what does kies say when you connect, like do you get two lines one of currant and the other latest. or is it all one line saying this is the latest.
this will work but it take's time. regard's joe
to set corect csc must wipe data and factory reset phone.
joecool666 said:
hi guys N gal's, just a quick tutorial on how to gain back you'r country sale's code ."CSC" . hope this help's as i know myself it's a nightmare to try and get it back to stock. so this is what i did . first i downgraded back as far as i could go for root witch is kk ANG, and my firmware. then goto playstore and download super.su and CSC changer, and ez file explorer for downloading towelroot install towelroot. root your phone at own risk. disable knox if it hang's on disabling knox just reboot you'r phone and hit super user again. and knox will show up again disable again it should work this time.done rooted open CSC changer tick with root, and you will see csc codes select you'r code and it will reboot it'self and install your code. this will wipe all your data on your device so beware.now install a fresh new lollipop with YOUR CSC CODE, well that's all folk's the end. hope it work's for you.regard's joe - remove this thread if it's not appropriate. kind regard's,
hit the thank's button if this help's....
Click to expand...
Click to collapse
Hi!
I have a G906K and the only rom available is from Korea.
How can I change CSC into BTU without having any other international rom and without rooting??
Is it possible??
Thank you.
PIRATA! said:
Hi!
I have a G906K and the only rom available is from Korea.
How can I change CSC into BTU without having any other international rom and without rooting??
Is it possible??
Thank you.
Click to expand...
Click to collapse
hi i don't think you can without rooting your device. sorry i cant help.
joecool666 said:
hi i don't think you can without rooting your device. sorry i cant help.
Click to expand...
Click to collapse
If l root, how can I do that?
Tnx.
Sent from my Samsung Galaxy S3 GT-i9300 using Tapatalk 4
PIRATA! said:
If l root, how can I do that?
Tnx.
Sent from my Samsung Galaxy S3 GT-i9300 using Tapatalk 4
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2696537
hope this can help you. regards joe,
joecool666 said:
http://forum.xda-developers.com/showthread.php?t=2696537
hope this can help you. regards joe,
Click to expand...
Click to collapse
Thank you, but I was referring at how can I change CSC if I decide to root... TheCSC changing how-to" was my question...
Sent from my Samsung Galaxy S3 GT-i9300 using Tapatalk 4
Hi, has anyone tried using Kies emergency firmware recovery? I tried "firmware upgrade and initialization" and entered by device serial, it detects correctly (XSE) but when I proceeded with it, it goes to the default CSC in the rom (XXV - its a multi CSC rom btw). Not sure how to get emergency firmware recovery code tho...