Related
Can get my nexus 7 to take the 4.1.2. os update? I loaded Clock Work Recovery and can see the error message? See attached .txt. file.
Can anyone help resolve why, I've tried about 50 different ways and no cigar:crying:
stevey00 said:
Can get my nexus 7 to take the 4.1.2. os update? I loaded Clock Work Recovery and can see the error message? See attached .txt. file.
Can anyone help resolve why, I've tried about 50 different ways and no cigar:crying:
Click to expand...
Click to collapse
Patching BrowserProviderProxy.odex failed. Get the bootloader, system.img, boot.img from the 4.2 factory image and flash those via fastboot. Afterwards, boot clockwork recovery and wipe cache and dalvik.
stevey00 said:
Can get my nexus 7 to take the 4.1.2. os update? I loaded Clock Work Recovery and can see the error message? See attached .txt. file.
Can anyone help resolve why, I've tried about 50 different ways and no cigar:crying:
Click to expand...
Click to collapse
You probably added the stock Ics browser for flash or something. Part of that procedure is to rename the file BrowserProviderProxy.odex to a backup name like BrowserProviderProxy.odex1. All you need to do is rename it back to the proper name. You can use something like root explorer or command line.
---------- Post added at 05:43 PM ---------- Previous post was at 05:36 PM ----------
Here is the original thread http://forum.xda-developers.com/showthread.php?t=1780746
UncleCemka said:
You probably added the stock Ics browser for flash or something. Part of that procedure is to rename the file BrowserProviderProxy.odex to a backup name like BrowserProviderProxy.odex1. All you need to do is rename it back to the proper name. You can use something like root explorer or command line.
---------- Post added at 05:43 PM ---------- Previous post was at 05:36 PM ----------
Here is the original thread http://forum.xda-developers.com/showthread.php?t=1780746
Click to expand...
Click to collapse
I had the same problem with es explorer. So I went to settings - root settings - unchecked each option and then rechecked it. Then i went back to the system - apps folder and renamed it - no problems. Good luck.
Date: 2015.08.12
Bootloader: unlock method unknown
Custom recovery: none
Hi,
I've modified original system.img file by adding su binaries and SuperSU apk.
I't the S118 ROM from this link, all the procedures are exactly the same as described here by mr.mrcn:
http://forum.xda-developers.com/android/general/lenovo-z90-7-vibe-shot-international-t3148018
Link for rooted ROM
After start just run the SuperSU application to update su binaries.
Enjoy!
okencjusz said:
Date: 2015.08.12
Bootloader: unlock method unknown
Custom recovery: none
Hi,
I've modified original system.img file by adding su binaries and SuperSU apk.
I't the S118 ROM from this link, all the procedures are exactly the same as described here by mr.mrcn:
http://forum.xda-developers.com/android/general/lenovo-z90-7-vibe-shot-international-t3148018
Link for rooted ROM
After start just run the SuperSU application to update su binaries.
Enjoy!
Click to expand...
Click to collapse
Hi. Does the ROM have Norwegian (Norsk (bokmål)) language?
okencjusz said:
date: 2015.08.12
bootloader: Unlock method unknown
custom recovery: None
hi,
i've modified original system.img file by adding su binaries and supersu apk.
I't the s118 rom from this link, all the procedures are exactly the same as described here by mr.mrcn:
http://forum.xda-developers.com/android/general/lenovo-z90-7-vibe-shot-international-t3148018
link for rooted rom
after start just run the supersu application to update su binaries.
Enjoy!
Click to expand...
Click to collapse
very useful!! Thanks
Hi All!
Who immediately flashed the phone from the Chinese version (VIBEUI_V2.5_1518_5.169.1_ST_Z90-7)
on
Lenovo Z90-7 (VIBE SHOT) - International (ROW) ROM, multilanguage, GAPPS, ROOT?
What is the method used by the firmware (Miflash, QFIL, etc)?
They did a factory reset before flashing or not?
The firmware was successful or not?
There were problems with the installation or not?
Are you satisfied with your phone with this firmware!
PLS, write review!
Thx!
Hi thank you, i need a root alot(im root oriented person)
Thanks!
help
okencjusz said:
Date: 2015.08.12
Bootloader: unlock method unknown
Custom recovery: none
Hi,
I've modified original system.img file by adding su binaries and SuperSU apk.
I't the S118 ROM from this link, all the procedures are exactly the same as described here by mr.mrcn:
http://forum.xda-developers.com/android/general/lenovo-z90-7-vibe-shot-international-t3148018
Link for rooted ROM
After start just run the SuperSU application to update su binaries.
Enjoy!
Click to expand...
Click to collapse
HI
so on top of your rooted one can i do this one? Z90a40_USR_S208_1507141216_Q2020131.4_ROW_OTAFull. zip
thanks
mato.kado said:
HI
so on top of your rooted one can i do this one? Z90a40_USR_S208_1507141216_Q2020131.4_ROW_OTAFull. zip
thanks
Click to expand...
Click to collapse
Hi, i have already uploaded S208 rooted on my google drive.
okencjusz said:
Hi, i have already uploaded S208 rooted on my google drive.
Click to expand...
Click to collapse
ah,so i just install your S208 version and thats it right? following mr.mrcn step by step
By the way i've downloaded already
dzenkuje
mato.kado said:
ah,so i just install your S208 version and thats it right? following mr.mrcn step by step
By the way i've downloaded already
dzenkuje
Click to expand...
Click to collapse
Yes, exactly. But if you are on S207 now you have to enter download mode by adb command "adb reboot edl", and remember to remove microsd card
okencjusz said:
Hi, i have already uploaded S208 rooted on my google drive.
Click to expand...
Click to collapse
this one is the rooted S208 version mate?
Z90a40_ROW_qpst_rooted_Okencjusz.zip
tha
---------- Post added at 06:34 PM ---------- Previous post was at 06:27 PM ----------
okencjusz said:
Yes, exactly. But if you are on S207 now you have to enter download mode by adb command "adb reboot edl", and remember to remove microsd card
Click to expand...
Click to collapse
me again ))
i got this version VIBEUI_V2.5_1522_5.310.1_ST_Z90-7 ,if i follow mr.mrcn step by step be ok or u got any advice.
tha
mato.kado said:
this one is the rooted S208 version mate?
Z90a40_ROW_qpst_rooted_Okencjusz.zip
tha
---------- Post added at 06:34 PM ---------- Previous post was at 06:27 PM ----------
me again ))
i got this version VIBEUI_V2.5_1522_5.310.1_ST_Z90-7 ,if i follow mr.mrcn step by step be ok or u got any advice.
tha
Click to expand...
Click to collapse
I think that this VIBEUI is chinese version, so mr.mrcn steps are fine.
Z90a40_ROW_qpst_S208_rooted_Okencjusz.zip - link to S208 rooted you will find on my post on needrom, i don't know why i cannot post this link here.
okencjusz said:
I think that this VIBEUI is chinese version, so mr.mrcn steps are fine.
Z90a40_ROW_qpst_S208_rooted_Okencjusz.zip - link to S208 rooted you will find on my post on needrom, i don't know why i cannot post this link here.
Click to expand...
Click to collapse
am gonna try,let u know how its work
thanks
---------- Post added at 07:43 PM ---------- Previous post was at 06:53 PM ----------
okencjusz said:
I think that this VIBEUI is chinese version, so mr.mrcn steps are fine.
Z90a40_ROW_qpst_S208_rooted_Okencjusz.zip - link to S208 rooted you will find on my post on needrom, i don't know why i cannot post this link here.
Click to expand...
Click to collapse
hmm,i am getting this message
The requested resources is in use. (0x800700aa: Open serial port"\\.\COM3")
i tried Disable Driver Signature Enforcement but doesnt work.
i am running W7 64bit
UPDATE:
i didnt have Debbuging mode on
i tried to flash and now i get this message
Reach the end of the file.)0x8070026: Receiving hello packet
UPDATE:
after i install WINDOWS 10 i flash without problem
everything running good now
okencjusz sir, im a little bit confused.. my vibe is on stock rom ( chinese ver.) can i flash your rooted S208 rom directly by doing these steps....
- download file Z90a40_USR_S208_1507141216_Q2020131.4_ROW_OTAFull. zip, rename it to 'update.zip'
- copy to phone memory or SD card
- reboot to recovery (turn off the phone, hit vol +- and hit power)
- install update package (it will take some time), reboot (first start will take few minutes)
anjirru said:
okencjusz sir, im a little bit confused.. my vibe is on stock rom ( chinese ver.) can i flash your rooted S208 rom directly by doing these steps....
- download file Z90a40_USR_S208_1507141216_Q2020131.4_ROW_OTAFull. zip, rename it to 'update.zip'
- copy to phone memory or SD card
- reboot to recovery (turn off the phone, hit vol +- and hit power)
- install update package (it will take some time), reboot (first start will take few minutes)
Click to expand...
Click to collapse
No, this way you cannot do it. Update from sd card is possible only with original update files which are digitally signed by lenovo. If something is modified (added root in this case) in such package the update is not possible. But you can still flash it with miflash application.
Hi. Do you have the one for 218 rom? Thanks
---------- Post added at 07:52 PM ---------- Previous post was at 07:48 PM ----------
Can I flash the 208 ROM while I am having the 218 latest? Thanks.
engineer000 said:
Hi. Do you have the one for 218 rom? Thanks
Click to expand...
Click to collapse
No, i think that it's available only via OTA update, so it's without root so it can't be downloaded from the phone for rooting purposes.
Besides my Z90-z is bricked now so i'm not able to work on it.
okencjusz said:
No, i think that it's available only via OTA update, so it's without root so it can't be downloaded from the phone for rooting purposes.
Besides my Z90-z is bricked now so i'm not able to work on it.
Click to expand...
Click to collapse
Sad story Hope you will be able to revive it.
Can I flash the 208 ROM while I am having the 218 latest? Thanks. Do you have a guide to root a ROM so that I can try to do it? Thanks again.
engineer000 said:
Sad story Hope you will be able to revive it.
Can I flash the 208 ROM while I am having the 218 latest? Thanks. Do you have a guide to root a ROM so that I can try to do it? Thanks again.
Click to expand...
Click to collapse
I was basing on this book: http://eu.wiley.com/WileyCDA/WileyTitle/productCd-111860864X.html
And chinese rooted ROM.
The problem was to join this system_1.img system_2.img and so on files into one correct system.img file to be mounted as ext4 filesystem under linux.
There is a file rawprogram0.xml with addresses of each splitted files, but you cannot join them directly - between them there is some unused space. You can figure out how many "unused" blocks are needed between particular files from rawprogram0.xml file.
okencjusz said:
I was basing on this book: http://eu.wiley.com/WileyCDA/WileyTitle/productCd-111860864X.html
And chinese rooted ROM.
The problem was to join this system_1.img system_2.img and so on files into one correct system.img file to be mounted as ext4 filesystem under linux.
There is a file rawprogram0.xml with addresses of each splitted files, but you cannot join them directly - between them there is some unused space. You can figure out how many "unused" blocks are needed between particular files from rawprogram0.xml file.
Click to expand...
Click to collapse
Thank you. I'll check that. I hope I can do it. Thanks again
okencjusz said:
I was basing on this book: http://eu.wiley.com/WileyCDA/WileyTitle/productCd-111860864X.html
And chinese rooted ROM.
The problem was to join this system_1.img system_2.img and so on files into one correct system.img file to be mounted as ext4 filesystem under linux.
There is a file rawprogram0.xml with addresses of each splitted files, but you cannot join them directly - between them there is some unused space. You can figure out how many "unused" blocks are needed between particular files from rawprogram0.xml file.
Click to expand...
Click to collapse
This comes with full rom. Is there a way you can help us root this?
http://lenovo-forums.ru/topic/13972-lenovo-vibe-shot-прошивка-z90a40-s218-150908-row/
Please Thanks
I am having Honor 7 from UAE with build number PLK-L01C185B120. How do i update to latest build B320 or B330? which ever is stable and official one.
Phone was previously only updated once by updater from which version I didn't notice. So how do I go about updating? downgrade first?
Pl note the steps below
1. Go to Settings -> about phone -> android versions
2. Check for compatibility of downloaded firmware (check attached compatibility note by honor (refer attached note)
Procedure:-
There are two methods to upgrade: normal upgrade and force upgrade.
Normal upgrade needs to start the handset and enter the System Update module. Force upgrade is just used when the handset can’t boot up or can’t enter the idle screen.
Note: While upgrading SD version do not connect to the PC through USB.
A) Forced Upgrade operations
B) Normal upgrade
Step 1. Format the Micro SD card (This operation is optional).
Step 2. Copy the Software: main package UPDATE.APP to a directory named dload.
Step 3. Copy the entire dload folder (with UPDATE.APP in it) to the root directory of the Micro SD card.
Step 4. Insert the Micro SD card into the handset and power on. After entering the home screen, To find System Update application, press Dialer->press *#*#2846579#*#*->select Software Upgrade->select SDCard Upgrade-> ok to start the upgrade.
Force upgrade
Step 1. Format the Micro SD card (This operation is optional).
Step 2. Copy the Software: main package to a directory named dload.
Step 3. Copy the entire dload folder (with UPDATE.APP in it) to the root directory of the Micro SD card.
Step 4. Make sure your handset is power off. Insert the Micro SD card into the handset. Press the VOLUME UP and VOLUME DOWN key, and then press the POWER key to power on the phone and enter the Software Upgrade Mode.
Step 5. When the progress bar stop, the phone will restart automatically
---------- Post added at 08:49 PM ---------- Previous post was at 08:46 PM ----------
rspn69 said:
Pl note the steps below
1. Go to Settings -> about phone -> android versions
2. Check for compatibility of downloaded firmware (check attached compatibility note by honor (refer attached note)
Procedure:-
There are two methods to upgrade: normal upgrade and force upgrade.
Normal upgrade needs to start the handset and enter the System Update module. Force upgrade is just used when the handset can’t boot up or can’t enter the idle screen.
Note: While upgrading SD version do not connect to the PC through USB.
A) Forced Upgrade operations
B) Normal upgrade
Step 1. Format the Micro SD card (This operation is optional).
Step 2. Copy the Software: main package UPDATE.APP to a directory named dload.
Step 3. Copy the entire dload folder (with UPDATE.APP in it) to the root directory of the Micro SD card.
Step 4. Insert the Micro SD card into the handset and power on. After entering the home screen, To find System Update application, press Dialer->press *#*#2846579#*#*->select Software Upgrade->select SDCard Upgrade-> ok to start the upgrade.
Force upgrade
Step 1. Format the Micro SD card (This operation is optional).
Step 2. Copy the Software: main package to a directory named dload.
Step 3. Copy the entire dload folder (with UPDATE.APP in it) to the root directory of the Micro SD card.
Step 4. Make sure your handset is power off. Insert the Micro SD card into the handset. Press the VOLUME UP and VOLUME DOWN key, and then press the POWER key to power on the phone and enter the Software Upgrade Mode.
Step 5. When the progress bar stop, the phone will restart automatically
Click to expand...
Click to collapse
Attachment for compatibility check
OK very nice, thanks for the help, I can follow that, but
1. where do I find UPDATE.APP?
2. Since I am on B120 version which firmware version should I download for update?
3. This is UAE model phone, Is downloading any B320 or B330 firmware can work for L01 model?
Note: phone default updater is not showing anything to be updated.
rspn69 said:
Pl note the steps below
1. Go to Settings -> about phone -> android versions
2. Check for compatibility of downloaded firmware (check attached compatibility note by honor (refer attached note)
Procedure:-
There are two methods to upgrade: normal upgrade and force upgrade.
Normal upgrade needs to start the handset and enter the System Update module. Force upgrade is just used when the handset can’t boot up or can’t enter the idle screen.
Note: While upgrading SD version do not connect to the PC through USB.
A) Forced Upgrade operations
B) Normal upgrade
Step 1. Format the Micro SD card (This operation is optional).
Step 2. Copy the Software: main package UPDATE.APP to a directory named dload.
Step 3. Copy the entire dload folder (with UPDATE.APP in it) to the root directory of the Micro SD card.
Step 4. Insert the Micro SD card into the handset and power on. After entering the home screen, To find System Update application, press Dialer->press *#*#2846579#*#*->select Software Upgrade->select SDCard Upgrade-> ok to start the upgrade.
Force upgrade
Step 1. Format the Micro SD card (This operation is optional).
Step 2. Copy the Software: main package to a directory named dload.
Step 3. Copy the entire dload folder (with UPDATE.APP in it) to the root directory of the Micro SD card.
Step 4. Make sure your handset is power off. Insert the Micro SD card into the handset. Press the VOLUME UP and VOLUME DOWN key, and then press the POWER key to power on the phone and enter the Software Upgrade Mode.
Step 5. When the progress bar stop, the phone will restart automatically
---------- Post added at 08:49 PM ---------- Previous post was at 08:46 PM ----------
Attachment for compatibility check
Click to expand...
Click to collapse
abdulkha said:
OK very nice, thanks for the help, I can follow that, but
1. where do I find UPDATE.APP?
2. Since I am on B120 version which firmware version should I download for update?
3. This is UAE model phone, Is downloading any B320 or B330 firmware can work for L01 model?
Note: phone default updater is not showing anything to be updated.
Click to expand...
Click to collapse
1. UPDATE.APP can be found in downloaded firmware by extracting.
2. B330 version is not suitable for LA model and that's why I mentioned earlier to check the compatibility of firmware . When you download and extract the firmware, you will find three files. 1) updater.app, 2. compatibility declaration and third about open source declaration.
3. Default updater hardly works for someone. So don't worry about that.
4. Its better to throw money in downloading firmware (data charges) but do not flash uncompatible rom and brick the mobile
---------- Post added at 06:58 AM ---------- Previous post was at 06:26 AM ----------
Download b320 version and check whether compatible with your region and version b120
rspn69 said:
1. UPDATE.APP can be found in downloaded firmware by extracting.
2. B330 version is not suitable for LA model and that's why I mentioned earlier to check the compatibility of firmware . When you download and extract the firmware, you will find three files. 1) updater.app, 2. compatibility declaration and third about open source declaration.
3. Default updater hardly works for someone. So don't worry about that.
4. Its better to throw money in downloading firmware (data charges) but do not flash uncompatible rom and brick the mobile
---------- Post added at 06:58 AM ---------- Previous post was at 06:26 AM ----------
Download b320 version and check whether compatible with your region and version b120
Click to expand...
Click to collapse
So far I have tried two roms b121 and b320 both are for the region of C432 (EU i guess) and result in failure immediately as soon as the process of update start. Both roms are not compatible for b120 but i tried anyway.
so now my question is how to change my region c185b120 to c432b121 so i can use b320 firmware to update?
btw I have unlocked the bootloader using multitool but still no change in failure.
Change region by debranding option found in honor 7 multi tool just follow the procedures there flash stock recovery of b100 and use the force update method mentioned to flash the whole rom of c432b100 after downloading it it will erase your data then you will recieve b121 upadate after ota you can update manually to b180 after that and you are good to go
I was on c185b120 now iam on c432b180 waiting the mm
---------- Post added at 04:28 AM ---------- Previous post was at 04:17 AM ----------
The mentioned options you will find in multitool debranding ..flashing stock recovery
if force update failed after flashing stock recovery use the method you already used and failed with you with the rom c432b100 and it wont fail isa as it becomes compatible just follow instructions in multitool and becareful
1 - Check Root Device!
2 - Download ES File Explorer (Google Play)
3 - Open ES File Explorer and accept permissions Root.
4 - Open Tools and mark Root Explorer.
5 - Come Back Local, and / Device next Open System after etc
6 - Paste file mixer_paths.xml (include link end post) and Replace existing File. (if you do not understand look at the attached images in the post.)
7 - Restart your Device
8 - Finish!
if by chance, your phone is muted after restart, follow These steps.
Open ES File Explorer, browse by location> / Device> System> etc and select mixer_paths.xml on file, go to properties, rw-rw-rw Then permissions and click change and tick all the boxes in Read and Write click ok and restart your device.
to better understand, look at the steps in the last images attached in the post.
For your safety also offers the original file if you can not apply the mod.
(Backup Stock Mixer_Paths.xml) >> https://mega.nz/#!to1EEZjD!JSLqydRhr9voea69grE3kCOwUj-cOCZNdbphm_Xtm_c
Download MOD >> https://mega.nz/#!ppcDhJpT!kdOAb-aoTPOol1PXVNgxbgOxnb0-6InoZ8pHA5_LlcE
works great.... thanks man!!!!
boss, you have A method that works in the 23.a.1.291 compilation?
DanielG_97 said:
boss, you have A method that works in the 23.a.1.291 compilation?
Click to expand...
Click to collapse
this will work in all marshmallow versions, just copy and set permission as (rw,r,r) or (644)
and reboot your device.:good::good:
---------- Post added at 08:25 PM ---------- Previous post was at 08:10 PM ----------
DanielG_97 said:
boss, you have A method that works in the 23.a.1.291 compilation?
Click to expand...
Click to collapse
this will work in all marshmallow versions, just copy and set permission as (rw,r,r) or (644)
and reboot your device.:good::good:
is there any method to increase the loudspeaker volume output ?
Hey guys
yesterday i bought Huawei nova plus (mla l11) , and update it to Android 7 and i searched in all internet for WORKING TWRP recovery for my model (mla l11) i found a thread but it was to (CAN-L01 ,CAN-L11, MLA-L03)
when i flash it it comes with alot of errors (can't mount) , (cant decrypt)
soo pleaseeee i want a working TWRP for my model (MLA l11)
thank you !
any help !!
Echtar said:
Hey guys
yesterday i bought Huawei nova plus (mla l11) , and update it to Android 7 and i searched in all internet for WORKING TWRP recovery for my model (mla l11) i found a thread but it was to (CAN-L01 ,CAN-L11, MLA-L03)
when i flash it it comes with alot of errors (can't mount) , (cant decrypt)
soo pleaseeee i want a working TWRP for my model (MLA l11)
thank you !
Click to expand...
Click to collapse
Format /data (not wipe!) from TWRP and then the errors about mounting /data will be gone. Note that this will wipe your internal memory, so you better backup your stuff before doing this.
Hi all,
No need to format data here link for twrp recovery
developped by @Mactavish.
Same as you i have an MLA-L11, and it work perfect
https://androidfilehost.com/?fid=962021903579480970
zaabolla said:
Hi all,
No need to format data here link for twrp recovery
developped by @Mactavish.
Same as you i have an MLA-L11, and it work perfect
https://androidfilehost.com/?fid=962021903579480970
Click to expand...
Click to collapse
sound great (u have the same device)
sorry iam noob so let me ask u question
when my device was bricked i unbricked it using this thread >> https://forum.xda-developers.com/nova-plus/help/to-stock-using-fastboot-t3708585 by #Henkate
and download this frimware from here >> https://www.getdroidtips.com/b350-nougat-huawei-nova-plus/
and now my mla l11 works good
then i download huawei updater finder and found a update (2018.01.12) and i think its the last update
so i donwloaded it with (huawei update finder) .. (FULLOTA-MF) and (OTA-MF) its name (MLA-L11C432B361)
so i want to flash it but i dont know how
Note : i dont have Update on setting menu O.O
sorry for my bad english and my stupid brain xD !
Updating is depending on your region and cust, don't flush any update if it is not for you region.
Regions are defined by end letters in cust
Exmp: mine is meaf c185d001
Meaf: meadle east africa
And if your device work good why want you update it, only if it's for android 8
For the missing update botton in your menu, i think you haven't cust too
In what about phone in parameter, the cust line is missing i think
And what about theme manager ?
zaabolla said:
Updating is depending on your region and cust, don't flush any update if it is not for you region.
Regions are defined by end letters in cust
Exmp: mine is meaf c185d001
Meaf: meadle east africa
And if your device work good why want you update it, only if it's for android 8
For the missing update botton in your menu, i think you haven't cust too
In what about phone in parameter, the cust line is missing i think
And what about theme manager ?
Click to expand...
Click to collapse
What is parameter ?!
Theme manger doesn't work and I tried a lot of method like create (hw_init) folder and give it permissions ...
Do you know how to solve it please
In about phone, and last line where the cust number is missing for you, no ?
And there's a thread on this forum to fix it
And i had this problem, and fixed it with creating hw_init folder
Redoo the instructions carefully and it will succed
If not, you have to flash cust.img ( you get it with update extracter) with fastboot method ( not tested !)
---------- Post added at 12:08 AM ---------- Previous post was at 12:01 AM ----------
Before i have an ascend P7, and cust problem was solved by an update.app for cust partition delivered by huawei.
For nova there's no cust update.app from huawei
zaabolla said:
In about phone, and last line where the cust number is missing for you, no ?
And there's a thread on this forum to fix it
And i had this problem, and fixed it with creating hw_init folder
Redoo the instructions carefully and it will succed
If not, you have to flash cust.img ( you get it with update extracter) with fastboot method ( not tested !)
---------- Post added at 12:08 AM ---------- Previous post was at 12:01 AM ----------
Before i have an ascend P7, and cust problem was solved by an update.app for cust partition delivered by huawei.
For nova there's no cust update.app from huawei
Click to expand...
Click to collapse
1.
Cust number is missing I can't find it in about phone
Okay I will going to extract it
Will I flash it with trwp (you gave to me) ?
2.
I tried all the method on this forum to fix this problem and failed ( theme changer )
Let me explain the ( theme changer ) error :
When I open app (themes) it open but not show anything (blank page) .. I tried install themes from play store and it's appear on theme manger and when I click apply nothing happen !
Hope you can help me with this problem
1- No cust.img fashed in fastboot mode not TWRP
2- I create a video how to create hw_init folder for themes, hope can help you
3- For cust partion i create a TWRP backup for you, hope can help you too
to restore cust backup, first you need to create a backup for any partition from your recovery
( the reason is that Twrp create a folder for your backups in your SDcard )
then replace files in your Twrp folder by mine, and choose restore cust partition from recovery
i haven't tested it, i only want to help you
i will give you links when upload is finished if you want
before doing any thing from my last post i want to try another method
i have a file to fix cust partition you can try it, if not succeed then try the other method
it's for europe region custom.bin file, extract archive and with root explorer from your phone
go to Root and Data search custom.bin file ( it's in the end ) save your original file by copying it
then replace it by the one given ( change permission to 0644 )
reboot and see if the problem is solved
zaabolla said:
1- No cust.img fashed in fastboot mode not TWRP
2- I create a video how to create hw_init folder for themes, hope can help you
3- For cust partion i create a TWRP backup for you, hope can help you too
to restore cust backup, first you need to create a backup for any partition from your recovery
( the reason is that Twrp create a folder for your backups in your SDcard )
then replace files in your Twrp folder by mine, and choose restore cust partition from recovery
i haven't tested it, i only want to help you
i will give you links when upload is finished if you want
Click to expand...
Click to collapse
First : i dont know how to thank you for what u doing for me <3 !!
Second : I found this ROM on huawei update finder app ,and when I click on (check firmware access) with my imie it says (its approve for installation) >> mla-l11c185b341
And I want to flash it manually (put update file on dload folder)
Will you suggest me to do that or what ?!
Note : now iam using recovery you gave to me (twrp) ,if you recommended this solution (put update file on dload folder) then I should flash to recovery stock recovery right ?!
BIG FAT THANKS FOR YOU BRO (˘❥˘)
zaabolla said:
before doing any thing from my last post i want to try another method
i have a file to fix cust partition you can try it, if not succeed then try the other method
it's for europe region custom.bin file, extract archive and with root explorer from your phone
go to Root and Data search custom.bin file ( it's in the end ) save your original file by copying it
then replace it by the one given ( change permission to 0644 )
reboot and see if the problem is solved
Click to expand...
Click to collapse
my device bricked after reboot :/ after putting ur coustme.bin and gave it perrmission
now lets stratr from 0 (fresh start) tell me the right firmware for my device cuz i was flash eu version
what can i do now !!
yes if you want official update you have to revert back to stock recovery, and i think 2 other things:
1- delete root by flashing stock boot file
2- relock bootloader
for links here the 2 links:
1- https://mega.nz/#!PN01iAAR!SicIiI9FRV5qqHRczic4P-8OaTnrPeSqIqWYhKyB2e0
2- https://mega.nz/#!2FczhJZS!VdfA-qr4V_ahJtLzsBuWEzC6NfkQJYIbcD_FFuZSn_Q
good luck
---------- Post added at 02:06 PM ---------- Previous post was at 02:00 PM ----------
Echtar said:
my device bricked after reboot :/ after putting ur coustme.bin and gave it perrmission
now lets stratr from 0 (fresh start) tell me the right firmware for my device cuz i was flash eu version
what can i do now !!
Click to expand...
Click to collapse
bricked how ?
you cant enter recovery?
if yes go to file manager and mount data partition if not mounted, search the file custom.bin and replace it by yours
don't be affraid, it's easy
zaabolla said:
before doing any thing from my last post i want to try another method
i have a file to fix cust partition you can try it, if not succeed then try the other method
it's for europe region custom.bin file, extract archive and with root explorer from your phone
go to Root and Data search custom.bin file ( it's in the end ) save your original file by copying it
then replace it by the one given ( change permission to 0644 )
reboot and see if the problem is solved
Click to expand...
Click to collapse
zaabolla said:
yes if you want official update you have to revert back to stock recovery, and i think 2 other things:
1- delete root by flashing stock boot file
2- relock bootloader
for links here the 2 links:
1- https://mega.nz/#!PN01iAAR!SicIiI9FRV5qqHRczic4P-8OaTnrPeSqIqWYhKyB2e0
2- https://mega.nz/#!2FczhJZS!VdfA-qr4V_ahJtLzsBuWEzC6NfkQJYIbcD_FFuZSn_Q
good luck
---------- Post added at 02:06 PM ---------- Previous post was at 02:00 PM ----------
bricked how ?
you cant enter recovery?
if yes go to file manager and mount data partition if not mounted, search the file custom.bin and replace it by yours
don't be affraid, it's easy
Click to expand...
Click to collapse
data not mounted on twrp !
chek the partions in "patitions mount tab" system and data an after go to advanced settings, file manager and replace file
zaabolla said:
chek the partions in "patitions mount tab" system and data an after go to advanced settings, file manager and replace file
Click to expand...
Click to collapse
cannot mount so i flash stock recovery and clear data now its unbricked
i want now to fresh start with the correct region firmware i downloaded one from huawei update finder
i will put update file on dload and upgrade (is that required locked bootloader ciz mine is unlocked) !
is that right or what tell me ur opinion!
yes it's true not in zip file, extract it and put update.app file in dload folder
zaabolla said:
yes it's true not in zip file, extract it and put update.app file in dload folder
Click to expand...
Click to collapse
yeah i see ! but is that required locked bootloader ?!
and there's no reason that TWRP can't mount partitions, i don't know why, it works for me
i have briked it when i flashed superuser and delete supersu files by recovery file manager
by the way tell me if you succeed by flashing a fresh update
---------- Post added at 02:39 PM ---------- Previous post was at 02:36 PM ----------
Echtar said:
yeah i see ! but is that required locked bootloader ?!
Click to expand...
Click to collapse
realy i dont' know but i think yes, i think update will not continue to 100%
before relocking you can try, why not?