Windows Edition - v0.9.11.0 - MD5 : A0F880F3CF420A31D86026F49A2013D7
Updated on 12/06/2013 ©2011 by Androxyde
More information at http://androxyde.github.com/
Flashtool Release Notes:
* 0.9.11
This version is a big split with every previous ones.
And not fully featured as previous can be.
I changed the UI framework from Swing to SWT because of a better integration with Mac UI.
Here is what is missing from previous releases :
- No multilingual UI
- No recovery installer
- No kernel installer (for 2010 devices)
- No ROM cleaner.
- Cannot Add/Edit/Remove devices.
No TA hex editor (in pro mode)
Version fully compatible with all 2013 devices (Z/ZL/Tablet Z etc etc)
Unified Bootloader unlock feature with the new BLU icon. No more unlock plugin.
As for flashing, BLU is available even without any connected device, even with
unrecognized devices.
Updated SuperSU package. Added servicemnu root hack
(works with Z/ZL for all FW up to .434)
Known working for Xperia T/V too
Added TA partition backup/restore. Using this feature, you can backup TA before unlock.
Restore TA will relock the devicee and get DRM back as well as BE2
(full complete relock). You cannot count on this feature if ever your device is
already unlocked. Missuse of this feature can brick the device
Introduction to Flashtool:
Flashtool is a flashing software that can be used to :
1. Flash original Images (Android 1.6, 2.1, 2.3 Images)
2. Root your phone
3. Install Recovery, Busybox, custom kernels
4. Clean your Rom (remove /system/apps apps of your choice)
(Be careful, unless you really know what you do, do not modify the default list.
This can make your phone stuck at the SE Logo)
5. Clear dalvik cache
6. Optimize (install of JIT v2)
(Disabled in 0.4, will readd it as a plugin for 2.1 phones only)
7. Customize (installs apps found in the custom/apps folder of the flashtool)
8. Clean uninstalled (remove any references to system apps removed in the
Clean (root needed) step)
9. Edit any text file on the device
10. Rebrand your device
Download Link
MOD EDIT: Not authorized mirror links.
MD
HIT THANKS BUTTON IF IT HELPED
This is not yours, and you are unable to support it. Moving this to General.
I'm pretty sure the devs of flashtool don't want it mirrored.
Sent from my Xperia Tablet Z using xda developers app
Thread Closed
As this is an info post to somebody elses work, the following actions have been taken.
1. Mirror download link removed.
2. Thread is closed as there is no need to post replies.
MD
My English is very poor
http://www.miui.com/thread-1297535-1-1.html
- Based on Meizu forum qwerrazxs bottom package patchrom made available
- Supported phone models for the M030, M031, M032
- Recommended end package for the flyme 2.1.3
- Basically reached the level of everyday use, recommended updates
- Outgoing recent task approach: setting - button, and then according to their own preferences
note! Brush the first time, please make a backup
1 double clear brush back official flyme 2.1.3
2, upgrade the baseband MX baseband (V02.1201.01-248)
3, Flyme firmware must be root (Settings - login account - More - Open System permissions)
4, download MIUI ROM, on the sd card root directory
5, download MX Brush Kit miui recovery (mx2 mx generic). Install Open and grant it root privileges.
6, point reboot bootloader mode
7, the first double clear, and then put the brush directly rom, Meizu's brush with the same way.
http://pan.baidu.com/share/link?shareid=331361021&uk=1997143330
thanks for sharing.
its weird to find no reply in this thread.
Hey all, FYI the latest version of MIUI fo Meizu MX (M030, M031, M032) may be found here:
[Meizu MX] [合作开发组] MIUI V5 for Meizu MX_3.11.8 by helinchun (4.1.x JB)
I had success installing it from a prerooted Flyme 2.1.x ROM (3.0.39-oversea kernel). The package only modifies the /system and /data partitions, leaving the bootloader, kernel & recovery still intact. It means the device is still perfectly capable of reflashing an official update.zip, although I don't believe Meizu will ever release a newer one beyond the 2.4.1 "test firmware".
- MIUI has a built-in superuser management UI, you don't need to install your version of su+superuser/supersu
- Some applications are .CN specific. I recommend slipstreaming Google Play (vending) and a standard keyboard such as TouchPal X / LatinIme in the zip package (you may want to look at other MIUI V5 ROMs in the forum for examples)
MIUI Installation for Meizu MX:
0- ALL IMPORTANT DATA BACKED UP AND SECURED IN A SAFE PLACE. your current rom is rooted (HK, or CN with Flyme open system privileges), with RW access to /system. Copy your MIUI zip package to /sdcard/
1- Install RecoveryInstaller.apk, open it and grant it elevated privileges when requested
2- click first button with some chinese text to install files to /system (no other partition is altered)
3- click second button with some chinese text to complete & restart phone. After reboot you should land in the MIUI recovery program for MX and MX2
4- It is not touch-enabled, use Vol+/Vol- to navigate, Back/Menu to Cancel/OK
5- Factory Reset + Wipe Cache + Wipe Data
6- Install from ZIP on sdcard (not update.zip), let it operate for a while
7- After install, go up/back into "Power" menu and restart phone
8- Phone will remain on the MIUI logo for a long time on the first run (generating cache, I suppose). LEAVE IT ALONE, DO NOT INTERRUPT IT. It shall last 5 minutes or so.
9- ???
10- Profit!
Notes:
- You may continue to use the normal Meizu recovery mode (VolUp+Power) to flash a stock update or radio firmware.
- I cannot provide support for everyday use of the phone, as mine's been given away to another person.
- Apparently you don't need a Xiaomi account to use the ROM.
Unrelated remark:
- Android 4.4 (KK/KLP) has minimal specs of 512 MB RAM, thanks to improvements in Linux Kernel 3.8 - yet Samsung hasn't released a 4412 BSP with 3.8 AFAIK
TwoPointZero said:
Hey all, FYI the latest version of MIUI fo Meizu MX (M030, M031, M032) may be found here:
[Meizu MX] [合作开发组] MIUI V5 for Meizu MX_3.11.8 by helinchun (4.1.x JB)
Click to expand...
Click to collapse
Hey thanks! Seems to be updated weekly too!
Too bad the transfer speeds from China are horrendous (any chance for a mirror?). I'm on 1 gbps and still max out at a measly 30 kB/s. Oh well, i'll just wait for a few hours.
Hi man, thank you so much for your installation steps! Just installed it from flyme 2.1.3 .. I think the post says to install from 2.4.1, but I'm not sure.. Anyway, seems to be working ok. Do you think it will be an issue in the future?
---------- Post added at 04:16 AM ---------- Previous post was at 03:52 AM ----------
Long pressing the home button doesnt bring up anything.. solution?
dagbro said:
Hey thanks! Seems to be updated weekly too!
Too bad the transfer speeds from China are horrendous (any chance for a mirror?). I'm on 1 gbps and still max out at a measly 30 kB/s. Oh well, i'll just wait for a few hours.
Click to expand...
Click to collapse
I got distracted and never actually got to installing it, so now I'm back almost a year later.
AND IT WORKS!
MIUI V5 is still being updated each week for the MX, and the latest release works great. It made my phone feel alive again.
ALL the files i used:
RecoveryInstaller.apk: From OP of this thread.
Flyme OS 2.1.3 downgrade : http://meizufans.eu/forum/thread-m03x-flyme-2-1-3-official
Latest MIUI from official site: http://en.miui.com/download-188.html
Then just follow TwoPointZero's instructions.
If you want Gapps as well: http://en.miui.com/thread-3998-1-1.html
QMobile Noir A9
Fully Working Android Ver. 4.2.2
for QMobile Noir A9, Fly IQ Trend, Myphone A888, Wiko Cink Peax and Intex Aqua Wonder
Good news for those who still have A9 and other mentioned phones in the heading that a much better JB 4.2.2 is available online for download.
This ROM is finalized by a few faces from Forum.Frandroid.com for Wiko Cink Peax (French version) and is not my work at all except that I had to tweak it so that everything works smoothly as in JB 4.1. I had to patch it because when I installed the ROM, it was very laggy and did not allow me to work without frustration. Moreover, I am using A9 hence, build.prop was to be arranged for such requirements too.
You will be installing this ROM at your own risk. I and the developers making it possible will not be held responsible if anything goes wrong. By the way, it is so simple to follow the process so don't worry.
Don't try it on other devices than mentioned above.
Special Thanks to;
1. Qus1, Pratikmore and Kimo06
2. My|Phone for releasing JB 4.2.2 for Amoi N820
3. Google for such a great OS
5. noobpremium for Universal MTK performance package
6. Ryuinferno for Universal init.d Support and other developers whose work is inside this ROM
How to install:
1. Do a full backup of your current ROM before proceeding (this is a precautionary move in case you don’t like the ROM, you can switch back)
2. I will recommend using TWRP Recovery in order to get a full backup including boot, data, system and android secure
3. Now reboot the mobile and manually delete all the hidden folders starting with dot (.) both from internal memory and external memory
4. Rename the folder “Android” to “Android.b” in order to get back your data files of games after installation
5. Restart in TWRP and wipe dalvic cache, cache, data, android secure and system
6. Now install jb2v2-8.zip
7. Later install A9Patch.zip. Other mobile users should not install the zip.
8. Wipe Cache and Dalvic Cache and restart the phone which will take a few minutes to ready the new ROM
9. Fill the information required for starting up the phone
10. Press Menu and start Universal init.d app, allow it root permission and then press Activate , later press Verify to check if init.d is supported.
12. Open Terminal Emulator in ROM Toolbox app and write "su". Give the root permission. Now the icon in emulator will change from "$" to "#". Now write "mtkod" and press enter. Processing will be done and later phone will restart itself.
11. Now all the work is done. You are ready to enjoy the Awesomeness of Jelly Bean 4.2.2
Pros:
1. Lots of Free RAM
2. New Snap Camera app with its Gallery (Stock Gallery is removed due to lack of customization and for auto-focus bug in Video capture)
3. Can fully utilize the Xposed Installer, GravityBox and other exposed apps for theming and animating etc.
4. Tethering, Hotspot, Bluetooth, WIFI and GPS working :good:
5. Better performance and color reproduction due to optimizations in build.prop and MTK performance package
6. Init.d is supported and few scripts are given in the added zips
BUGS:
1. Pinkish Camera result when capturing in low light
2. Slight lag during installing and uninstalling apps. Usage of battery doctor is essential for task killing and battery optimization
3. Others you tell me
DOWNLOAD LINK of the ROM
DOWNLOAD A9Patch.zip
Download Universal MTK performance package by noobpremium
P.S. Don’t PM me if there is any query. Just post your question on this page.
XDA:DevDB Information
AOSP JB 4.2.2 for Noir A9 and WCP, ROM for all devices (see above for details)
Contributors
alirazaagha, Qus1, Pratikmore, Kimo06, Willteck and others
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: JB 2 v2.8
Stable Release Date: 2014-06-24
Current Beta Version: JB 4.2 Beta 1
Beta Release Date: 2013-09-18
Created 2014-09-08
Last Updated 2014-09-15
Boost the Speed
Open ROM toolbox lite then CPU control and choose "ondemandx" as Governor and "sio" as I/O scheduler and check mark "Apply on boot". Now, enjoy a massive boost in performance :highfive:
Warning1
Not working for Wiko Cink Peax 2 (french model)..
It loops on bootanimation (WIKO.....).
Thank.
Bouziane_Dr said:
Not working for Wiko Cink Peax 2 (french model)..
It loops on bootanimation (WIKO.....).
Thank.
Click to expand...
Click to collapse
Sorry bro, your phone is not same as Wiko cink peax (1) and is not compatible with this ROM. You must check out frandroid.com for your phone. There are plenty of ROMs available for your phone.
update the link please.
Only fresh flashed bootloader locked XT1058 AT&T - ROM LPAS23.12-21.7-1, and XT1060 VZW - ROM LPAS23.12-39.7-1 are supported!
See archive content for instructions. Time to install ~20 min. If you experience problems after Android boot, like not working buttons or quick settings, wipe cache + data partitions. Don't update SuperSU (disable auto updates), it won't work. Later I'll post complete debloated ROMs with fresh SuperSU version, and simplify instructions. Be informed also, that this method doesn't give you read-write rights like unlocked bootloader. You may read and write having root-rights, but only till a restart or shutdown occurs, and every change will be undo by the Qualcomm protection (like HTC' s=on).
At the moment patch includes:
SuperSU 2.65 Free
Xposed Framework v86 (installer, modules)
Busybox 1.25.0.YDS, path /system/xbin/busybox
Download
P.S. Install only on indicated above ROM versions, and it's obvious that you must have enough theory knowledge and practical experience to make use of 9008 patch, so I'm not responsible for any consequences, etc. Greets go to: CrashXXL (method inventor), Sabissimo (our former OP), and serg_gangubas (ROM guru).
==============================================================================================
31.07.2017 - Full ROM Patch for Bootloader Locked Moto X ATT/VZW/etc
Based on the same principle, and not depend on system partition content, so it suits any bootloader locked Moto X Gen1 ATT/VZW (possibly any model, besides 1049 RepW / 1055 US Cell), but takes about 4 hours to be done - prepare for that, 100% battery level only!
This full ROM patch includes:
SuperSU 2.82 Free
Xposed Framework v87 (installer, modules)
Busybox 1.26.2, path /system/xbin/busybox
ViperFX 2.5.0.5 - sorry needs polishing, removed now (
Gallery and Camera not depend on Moto services
Gboard instead AOSP Keyboard. If it eats too much RAM, see Simple Keyboard
GAPPSes updated. Use command like adb shell pm uninstall --user 0 com.blahblah.blah to block any unwanted app or service
ES File Explorer Free Edition (a clone, you can disable and install yours )
"Jedy" gesture
AdBlock support (effect lasts till the 1st reboot yet, I'll think about make it constant). Please, choose /data/hosts instead of /system/etc/hosts
ROM debloated, but not deodexed.
Download
Instruction
Be careful, phone will be WIPED then flashed in 9008 "brick" mode (CrashXXL idea). Before you start install Moto drivers, latest RSD Lite, and fully charge the battery.
1) Download and unpack zip on С: (or any), open Python27, launch RUN_path.bat (needs to be launched only single time), install driver QHSUSB_driver.exe, and launch file _Moto.X.BootLocked.*.exe (where * - is desired ROM).
2) Go into fastboot mode, execute RUN_blbroke.bat. Screen gets black, Device Manager in Windows finds "QHSUSB_DLOAD", and installs it as "Qualcomm HS-USB QDLoader 9008 (COM*)". If it doesn't install, google for Windows driver digital signature disable.
3) Now launch RUN_root.bat, and see that patching process took start.
4) A small patch *SPEAKERS.BOOST.exe (if exists) boosts both speakers' volume.
P.S. Please, don't flash anything extra into the phone. In case of trouble, all you need is inside this folder. Just make it work.
To make "Battery OK" in fastboot use fastboot_cyclecharge.bat
Completely drained out battery causing "USB input device" needs disassembly of the phone to charge externally.
In case Titanium Backup shows error "Batch backup interrupted: insufficient free storage space", delete default backup folder, and make a new:
Titanium Backup > Menu > Preferences > Backup folder location > Storage Provider > DocumentProvider storage > Show Internal Storage > Internal Storage > Select Internal Storage > Create the folder > Use the current folder. Done!
Notes for myself: Viper, force wipe, readme.txt, volume patch, Adblock, advanced debloat
Debloated, rooted, lightweight ROM - soon! )
PUBLISHED. Sorry, took long time.
As soon as I can actually get 5.1 flashed I'll try this.
Though I'm afraid I'll have to try to go to stock and use sunshine first, still have a locked BL.
But this is great, I didn't expect root so soon.
DownTheCross said:
As soon as I can actually get 5.1 flashed I'll try this.
Though I'm afraid I'll have to try to go to stock and use sunshine first, still have a locked BL.
But this is great, I didn't expect root so soon.
Click to expand...
Click to collapse
This method is working on locked BL.
DownTheCross said:
As soon as I can actually get 5.1 flashed I'll try this.
Though I'm afraid I'll have to try to go to stock and use sunshine first, still have a locked BL.
But this is great, I didn't expect root so soon.
Click to expand...
Click to collapse
Wait wait... If you can have now possibility to unlock bootloader - go for it immediately! You will have normal FULL root-rights (SuperSU 2.49). Don't install 5.1, if you plan to unlock, because Sunshine app (25$) works only on 4.4.2 Android.
This topic is to help those AT&T users that are boot locked forever (who missed out possibility to unlock on 4.4.2 by proceed to 5.1) to give them READ-ONLY root. Yes, it's limited, but anything at least.
s5610 said:
If you can have now possibility to unlock bootloader...
Click to expand...
Click to collapse
I guess anyone on 4.4.4 today. There is no possibility to use Sunshine anymore.
Anyway spasibo za method
Ahh, if I don't have to be BL unlocked that's great lol.
I haven't read too much into the 5.1 updates or sunshine for that matter.
I've been on krypton 1.4.1 since it was released, and I haven't been able to successfully upgrade to any 5.1 roms yet.
Works great!
Works great for me on Windows 10 RTM 64-bit! Thanks a ton, I was waiting for a post like this.
I only had 3 minor hiccups:
1. RSD Lite gave me an error about "getvar", so I had to go into flashfile.xml in the ROM zip and remove the line that said getvar
2. I had to reboot to disable driver signature enforcement twice for some reason because Windows Update
3. The run-root.bat got stuck on "Executing..." because I installed the wrong driver (the correct file is qcusb.inf when installed from device manager -> browse my computer for driver software -> let me pick from a list -> all devices -> have disk)
Otherwise, everything runs just as well as KitKat, including Xposed.
Hehe got to love step 9
System Write
How can we help in getting the system write to zero using the same method,because I have xt1058 model bootloader unlocked and I provide any file needed to disable the pesky system write...
How can we help in getting the system write to zero using the same method,because I have xt1058 model bootloader unlocked and I provide any file needed to disable the pesky system write...
Click to expand...
Click to collapse
First, never quote op. It takes way to much space and is redundant.
Second, to get write off we would need to some how either start a custom kernel some magical way or disable it via a kernel mod like htc guys did. Another way, which was done before was to burn the efuse but kernel has been patched since then.
Need some help, I did all steps until step 9. I installed the QHSUSB_DLOAD driver manually, and I can see 'Qualcomm HS-USB QDLoader 9008 (COM4)' showed in my Device Manager, but when I run 'RUN_Root.bat', I got this
c:\Python27>python qdloadRoot.py MPRG8960.bin -ptf root/partitions.txt
QDLoad utility version 1.2 (c) VBlack 2014
Found TTY port: com4
Sending MAGIC ...
QCOM fast download protocol targ:
Version: 7
Compatible version 2
Maximum block size 1024 (0x00000400)
Base address of Flash 0x00000000
Flash: eMMC
Window size: 30
Number of sectors: 128
First sector size: 2097152 (0x00200000)
Feature bits: 09
Sending SBL Reset...
Done
c:\Python27>pause
Press any key to continue . . .
Then I tried to run 'RUN_Root.bat' again, then I got
c:\Python27>python qdloadRoot.py MPRG8960.bin -ptf root/partitions.txt
QDLoad utility version 1.2 (c) VBlack 2014
Found TTY port: com4
Requesting Params...
Params:
Version: 8
Min version: 1
Max write size: 1536 (0x00000600)
Model: 144
Device size: Invalid or unrecognized Flash device, or Flash device progr
amming not supported by this implementation
Device type: Intel 28F400BX-TL or Intel 28F400BV-TL
Requesting SoftwareVersion...
Version: PBL_DloadVER2.0
Requesting SerialNumber...
Serial number: 00,00,48,03
Requesting HW Id...
HW Id: 00,00,48,03,e1,10,7e,00
Requesting PublicKey...
PublicKey: 39,c4,ee,3e,b5,be,eb,87,8e,2f,e3,b8,53,4d,14,6f,91,ca,fd,bb,94,2a,0d
,aa,d0,1e,b0,87,62,d4,b9,b8
Uploading file 'MPRG8960.bin' to addr 0x2a000000...
Executing...
Could not find Qualcomm device in Emergency download mode
Done, with errors!!!
c:\Python27>pause
Press any key to continue . . .
any suggestions? Thanks
jahrule said:
First, never quote op. It takes way to much space and is redundant.
Second, to get write off we would need to some how either start a custom kernel some magical way or disable it via a kernel mod like htc guys did. Another way, which was done before was to burn the efuse but kernel has been patched since then.
Click to expand...
Click to collapse
Ill put the files here
Fantastic!!! I was looking this. All the last week I was sleeping about 3 hours per day trying to root my phone.
----
I scream "Victory" before the process finish.
Damn! My phone reboot and stay in the android doll fallen screen.
DejanPet said:
Ill put the files here
Click to expand...
Click to collapse
What to do with these files?
Those files are needed by Jahrule
Sabissimo
Hello.
I did everything as instructed, but eventually got the screen "no command".
The only thing I did not flash rom - a month ago updated by an OTA to 5.1, thought it was not necessary.
Factory reset does not help.
Advise something.
In the end, everything worked, thank you))
It works
It works great! Thank you very much! ATT xt1058.
eze_cba17 said:
Damn! My phone reboot and stay in the android doll fallen screen.
Click to expand...
Click to collapse
Follow the OP instruction EXACTLY, no exceptions!
If you got your current 5.1 through AT&T OTA, it's not enough for root patching procedure. A full RSD 5.1 official SBF flash over is required.
Could someone please do a video on this. I'm having a little trouble.
All developments are carried out thanks to donations on Purchase of these or other devices
thank
Please do not copy files to other file shares
the project is under constant development and refinement
Project name ROM Moto X L!te FW KXA21.12-L1.26.EU.ML
Tagline Faster Lighter Economical
SYSTEM Firmware KXA21.12-L1.26.EU.ML Multilingual
- firmware Deodex - allowing resources using modifiers such GravityBox apply all when firmware odex, it sometimes limited customization or going awry
- tzdata 2015f
- icudt51l last
- return "the gesture of the Jedi" (after installing the firmware of the old sensor /*** it does not threaten the phone)
- delete more apps MotoServices, Google Drive & Docs, Permissions and etc
- replaced by sound WirelessChargingStarted
- old gapps for long work phone
- uppdate apps Chrome, LatinIME, Skip, TouchLess, MotCamera, MotGallery, Migrate
- tetering work
- removed a lot of the background services collect and send data on the type of phone DropBox, MotoCare, MotoConntect, Drive, FaceLock ... etc.
- added Russian, Ukrainian language
for Unloked Device
Install for Custom Recovery
Root not PreInstalled
Download there https://yadi.sk/d/jp8ykQqFindY8/MotoX/4.4.4
for Loked Device
Install for QDLoad9008
Root, Xposed, BusyBox is PreInstalled
- Root SuperSU v2.46
- XPosed 2.6.1
- BusyBox v30
DISCLAIMER
Author is not responsible for totally bricked devices, broken arms, legs, plane crashes and your wife's cheating.
All actions taken is your own risk.
Instructions to install
You:
- shouldn't be afraid of Qualcomm HS-USB QDLoader 9008;
- do not change any files, pathes;
- can install drivers manually;
- need to install python-2.7.9 and pyserial-2.7.win32;
- unzipp _Rus_4_4_4_KXA21_12-L1_26_BL_V30.B7.rar to Cython27;
Method is dangerous, however gives results.
you must have firmware SU6-7 receiving is not in the form of an update (OTA) and stitched through the RSD Lite.
00 Flash *******_4.4.4-KXA21.12-L1.26_CFC_1FF.xml firmware
01 Unzipp everything to Cython27.
02 Run BLBROKE.bat.
03 After you got Qualcomm HS-USB QDLoader 9008, install drivers manually
04 Run RUN_Rus_***_Part**.bat. Parts XX of system.
*** You can also run a file if you are sure that your phone can work 4-5 hours with the screen RUN_Rus_***_Full.bat
then repeat this step X times (the number of times equal to 6)
while (found next part) do
***
>> fastboot to hold 10 minutes that would have been charged a little phone
>> Run BLBROKE.bat.
>> Run RUN_Rus_***_Part**.bat. Parts XX of system.
***
end
99 Turn device on. Now you have SU DEODEX PreRooted
installed application Xposed 2.6.1
Xposed launched clicked install, reboot your phone
I see that the application is launched is set app_process 58 (pre-installed in the system) and XPosedBridge.jar 54 version (made with the application)
then uploaded GravityBox [KK], a check mark, the next reboot, and everything works
Drivers, Soft there -> https://yadi.sk/d/p458Cy0XineRC
Scripts, ROM there -> https://yadi.sk/d/kxbxpTnziSg35/Moto X/4.4.4
Please do not copy files to other file shares
the project is under constant development and refinement
XDA:DevDB Information
[ROM] Moto X L!te FW KXA21.12-L1.26.EU.ML, ROM for the Moto X
Contributors
CrashXXL
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Android 4.4.4 KXA21.12-L1.26
Version Information
Status: Stable
Current Stable Version: 1.00
Stable Release Date: 2015-10-14
Current Beta Version: 0.01
Beta Release Date: 2015-10-04
Created 2015-10-10
Last Updated 2015-10-15
Hi, im on 4.4.3.... I have root and bootloader unlocked. What i need to install?
Just download and install by twrp? Or i need do something before?
Hi, I'm on Moto X ATT 5.1 with locked bootloader. Can I downgrade to this rom?
which file should i download KXA21.12-L1.26.EU.ML-Post-Release.zip or KXA21.12-L1.26.EU.ML.zip ???