Related
QMobile Noir A9
Fully Working Android Ver. 4.2.2
for QMobile Noir A9, Fly IQ Trend, Myphone A888, Wiko Cink Peax and Intex Aqua Wonder
Good news for those who still have A9 and other mentioned phones in the heading that a much better JB 4.2.2 is available online for download.
This ROM is finalized by a few faces from Forum.Frandroid.com for Wiko Cink Peax (French version) and is not my work at all except that I had to tweak it so that everything works smoothly as in JB 4.1. I had to patch it because when I installed the ROM, it was very laggy and did not allow me to work without frustration. Moreover, I am using A9 hence, build.prop was to be arranged for such requirements too.
You will be installing this ROM at your own risk. I and the developers making it possible will not be held responsible if anything goes wrong. By the way, it is so simple to follow the process so don't worry.
Don't try it on other devices than mentioned above.
Special Thanks to;
1. Qus1, Pratikmore and Kimo06
2. My|Phone for releasing JB 4.2.2 for Amoi N820
3. Google for such a great OS
5. noobpremium for Universal MTK performance package
6. Ryuinferno for Universal init.d Support and other developers whose work is inside this ROM
How to install:
1. Do a full backup of your current ROM before proceeding (this is a precautionary move in case you don’t like the ROM, you can switch back)
2. I will recommend using TWRP Recovery in order to get a full backup including boot, data, system and android secure
3. Now reboot the mobile and manually delete all the hidden folders starting with dot (.) both from internal memory and external memory
4. Rename the folder “Android” to “Android.b” in order to get back your data files of games after installation
5. Restart in TWRP and wipe dalvic cache, cache, data, android secure and system
6. Now install jb2v2-8.zip
7. Later install A9Patch.zip. Other mobile users should not install the zip.
8. Wipe Cache and Dalvic Cache and restart the phone which will take a few minutes to ready the new ROM
9. Fill the information required for starting up the phone
10. Press Menu and start Universal init.d app, allow it root permission and then press Activate , later press Verify to check if init.d is supported.
12. Open Terminal Emulator in ROM Toolbox app and write "su". Give the root permission. Now the icon in emulator will change from "$" to "#". Now write "mtkod" and press enter. Processing will be done and later phone will restart itself.
11. Now all the work is done. You are ready to enjoy the Awesomeness of Jelly Bean 4.2.2
Pros:
1. Lots of Free RAM
2. New Snap Camera app with its Gallery (Stock Gallery is removed due to lack of customization and for auto-focus bug in Video capture)
3. Can fully utilize the Xposed Installer, GravityBox and other exposed apps for theming and animating etc.
4. Tethering, Hotspot, Bluetooth, WIFI and GPS working :good:
5. Better performance and color reproduction due to optimizations in build.prop and MTK performance package
6. Init.d is supported and few scripts are given in the added zips
BUGS:
1. Pinkish Camera result when capturing in low light
2. Slight lag during installing and uninstalling apps. Usage of battery doctor is essential for task killing and battery optimization
3. Others you tell me
DOWNLOAD LINK of the ROM
DOWNLOAD A9Patch.zip
Download Universal MTK performance package by noobpremium
P.S. Don’t PM me if there is any query. Just post your question on this page.
XDA:DevDB Information
AOSP JB 4.2.2 for Noir A9 and WCP, ROM for all devices (see above for details)
Contributors
alirazaagha, Qus1, Pratikmore, Kimo06, Willteck and others
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: JB 2 v2.8
Stable Release Date: 2014-06-24
Current Beta Version: JB 4.2 Beta 1
Beta Release Date: 2013-09-18
Created 2014-09-08
Last Updated 2014-09-15
Boost the Speed
Open ROM toolbox lite then CPU control and choose "ondemandx" as Governor and "sio" as I/O scheduler and check mark "Apply on boot". Now, enjoy a massive boost in performance :highfive:
Warning1
Not working for Wiko Cink Peax 2 (french model)..
It loops on bootanimation (WIKO.....).
Thank.
Bouziane_Dr said:
Not working for Wiko Cink Peax 2 (french model)..
It loops on bootanimation (WIKO.....).
Thank.
Click to expand...
Click to collapse
Sorry bro, your phone is not same as Wiko cink peax (1) and is not compatible with this ROM. You must check out frandroid.com for your phone. There are plenty of ROMs available for your phone.
update the link please.
How To Install Flyme OS 6.1.0.0G Global Stable on Chinese Pro 6 Plus devices
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is a Guide to install the Global ROM Flyme OS 6Global on the Meizu Pro 6 Plus Chinese version.
Note: This is also a way to install Any custom ROM made in the future. If someone wanna Customize the ROM( Integrate Xposed and other stuff) feell free to do it.
What does this mean:
Meizu released two versions of the Pro 6 Plus, a chineese version (A) for china and an International version (G) for the devices sold in other countries (International). If you bought your Pro 6 plus from official meizu store on your country, it will come with the G version, but if you bought it from Aliexpress or any other Chinese store, you will buy a Chinese version, some seller may send you the international version if you are lucky but the majoritynot.
Global / International version:
No bloatware, chinese apps..
Multilanguage ( all languages available)
Stock apps optimized for International use (Weather....)
seems to be smoother and faster than the chinese version.
Disclaimer
*** As always - Read everything carefully and Flash on our own risk! ***
I can and will not take any responsibility for bricked phones or lost data.What do we need:
Rooted Device
FlashFire app from playstore
Flyme 6.1.0.0G _Global_Stable_Pro 6 Plus for Flashfire
Instructions:
Its recomnended to back up your data (Titanium backup, your fotos etc)in case of disaster.
Update to a newer version:
Copy the new version to Internal storage
Open Flashfire, click on the + button and choose Flash Zip / OTA
Select the Downloaded ROM from the file explorer and select Mount system read write.
Now you will see a screen with all the actions that will be done, select the action called Reboot and un-thick the option Preserve recovery, leave Normal selected.
Finally click on FLASH and wait until the process ends.
Enjoy...
Note: In case of any problems and you want a clean installation, add the wipe action from the + button before flashing. But it should not be needed.
Note: it seems to be a problem with supersu if you don't wipe data before update. so to avoid problems, you should wipe before flash.
If you want to keep your apps and data, you should make a data (data partition only) backup from flashfire before updating. then wipe and update, follow instructions to root and to have super su. After that you can use flshfire to restore data backup (only data partition) .
also you can use kingroot but its not compatible with flashfire.
If you already updated, you can use titanium backup(give root permision from system root in settings, security root permissions)make a backup of your apps and then follow the guide below How to go back to stock chinese ROM in case of disaster, after that follow the instruction of new installation and when you have the that done, you can rstore your apps with titanium backup.
[/LIST]
First Time Installation:
Root:
Go to Meizu page and create and account. Enter a valid email as its needed to activate the account. if you already have an account, just skip this step.
Now go to Settings on your device and Select Meizu account, Log in with your new created account.
Go back and select Fingerprint & security , then select Root permission, scroll down and confirm. The device will reboot. Now its rooted but i recommend installing supersu because the built int root some times has failed for me.
Install SuperSu from playstore, open it and select Update su binary, choose Normal. wait until it finishes and reboot.
Now you have Root
Note: if you dont have Google Playstore, open meizu app store and search for supersu.
Install ROM:
Root your device
Install Flashfire from Playstore
Download This modified Flyme 6.1.0.0G _Global_Stable_Pro 6 Plus for Flashfire
[*]Copy the downloaded ROM to Internal storage
[*]Open Flashfire, give root permissions and click on the + button,
[*]Select Wipe and then ok
[*]Click again on the + button and choose Flash Zip / OTA
[*]Select the Downloaded ROM from the file explorer and select Mount system read write. See these screens for more information:
[*]Now you will see a screen with all the actions that will be done, select the action called Reboot and unthick the option Preserve recovery, leave Normal selected.
[*]Finally click on FLASH and wait until the process ends.
[*]Enjoy...
Optional:
You can Install gapps from flashfire along with the rom, just select Flash zip/ota and select Gapps zip, this way it will be installed after rom. Or you can use Google Installer which you can find in meizu appstore after reboot.
Note: For future updates, do not update the device from the Updates app included as it will donload the Gobal version of Flyme but it will fail because your device is still a chinese version.
How to go back to stock chinese ROM in case of disaster:
Download the latest version of chinese Flyme from: [url]http://www.flyme.cn/firmwarelist-101.html#3
Turn off the device （hold power button until it turns off.
Hold Volume + button and power button at the same time until the phone vibrates. it will enter recovery mode.
Connect your device to your PC by usb, you will have access to a folder named Recovery. Copy the update.zip to this folder and wait for it to finish.
Go back to the device and select the options Upgrade System and Clear data.
Hit Start and wait until it finishes.
Older Versions:
Flyme OS 6.7.4.11_beta_Global_Pro 6 Plus for Flashfire
Thanks for this tutorial! It was very detailed and easy to follow.
In the future when I want to perform an update, do I need to go through FlashFire in order for it to work correctly on a Chinese version of the device? Also, where do you download the "G" versions of the beta firmware? I know their next release is a stable version and I know it comes out after the A version; just wondering where you go to download it. Cheers!
ShaolinMilk said:
Thanks for this tutorial! It was very detailed and easy to follow.
In the future when I want to perform an update, do I need to go through FlashFire in order for it to work correctly on a Chinese version of the device? Also, where do you download the "G" versions of the beta firmware? I know their next release is a stable version and I know it comes out after the A version; just wondering where you go to download it. Cheers!
Click to expand...
Click to collapse
For future update you can download the stable from http://www.flymeos.com/firmwarelist?modelId=46&type=1. Or the betas from flyme forum. You will have to edit the installation script to be able to flash through flashfire and don't get error and avoid firmware problems. Anyway i will upload the future updates modified for flashfire.
bihariel said:
For future update you can download the stable from http://www.flymeos.com/firmwarelist?modelId=46&type=1. Or the betas from flyme forum. You will have to edit the installation script to be able to flash through flashfire and don't get error and avoid firmware problems. Anyway i will upload the future updates modified for flashfire.
Click to expand...
Click to collapse
Thanks!!! I tried looking through the zip file to see what you changed, but didn't know which file to go into. I assume it's not as easy as opening up a file in notepad and changing some data on there.
ShaolinMilk said:
Thanks!!! I tried looking through the zip file to see what you changed, but didn't know which file to go into. I assume it's not as easy as opening up a file in notepad and changing some data on there.
Click to expand...
Click to collapse
Its not hard to do but yes, i you dont know what are you doing is dangerous. Dont worry i will upload future updates.
bihariel said:
Its not hard to do but yes, i you dont know what are you doing is dangerous. Dont worry i will upload future updates.
Click to expand...
Click to collapse
Thanks dude! Looking forward to it.
im surprised at how small the response to this phone is....just stumbled upon it while looking for a new device.
this is rather off-topic but this seems to be the most active thread
thanks for that.
i have question,i can flash the Flyme 5.2.7.0G by this method?
@bihariel Hey I have a question for you. Have you ever experienced a sudden change in battery life out of nowhere? When I first installed this firmware, the battery was perfect. All of a sudden after charging my phone, the battery is draining at an unprecedented rate especially on standby. I charged the phone to 100%, disabled all notification/wifi/cellular network and left it on overnight to activate the battery calibration. The problem still exists however. It's draining about 1% every 2 minutes on standby which is ridiculous.
I'm just wondering if you ever encountered this issue before.
Sent from my PRO 6 Plus using XDA-Developers Legacy app
mr.mgmg said:
thanks for that.
i have question,i can flash the Flyme 5.2.7.0G by this method?
Click to expand...
Click to collapse
You can but you have to modify the script to avoid firmware files and recovery.img to be flashed, which would end in an installation abort,
ShaolinMilk said:
@bihariel Hey I have a question for you. Have you ever experienced a sudden change in battery life out of nowhere? When I first installed this firmware, the battery was perfect. All of a sudden after charging my phone, the battery is draining at an unprecedented rate especially on standby. I charged the phone to 100%, disabled all notification/wifi/cellular network and left it on overnight to activate the battery calibration. The problem still exists however. It's draining about 1% every 2 minutes on standby which is ridiculous.
I'm just wondering if you ever encountered this issue before.
Sent from my PRO 6 Plus using XDA-Developers Legacy app
Click to expand...
Click to collapse
Not really, the battery is surprising me on this ROM. Maybe you sould use a battery monitoring app and see whats draining it. If not, do a factory reset and see if it still prsists.
bihariel said:
You can but you have to modify the script to avoid firmware files and recovery.img to be flashed, which would end in an installation abort,
Click to expand...
Click to collapse
so,how we can do that?
i think the 6.7.4.11_beta_Global no stable yet
u can edit the Flyme 5.2.7.0G?
bihariel said:
How To Install Flyme OS 6.7.4.11 Global on Chinese Pro 6 Plus
This is a Guide to install the Global ROM Flyme OS 6.7.4.11 on the Meizu Pro 6 Plus Chinese version.
Note: This is also a way to install Any custom ROM made in the future. If someone wanna Customize the ROM( Integrate Xposed and other stuff) feell free to do it.
What does this mean:
Meizu released two versions of the Pro 6 Plus, a chineese version (A) for china and an International version (G) for the devices sold in other countries (International). If you bought your Pro 6 plus from official meizu store on your country, it will come with the G version, but if you bought it from Aliexpress or any other Chinese store, you will buy a Chinese version, some seller may send you the international version if you are lucky but the majoritynot.
Global / International version:
No bloatware, chinese apps..
Multilanguage ( all languages available)
Stock apps optimized for International use (Weather....)
seems to be smoother and faster than the chinese version.
Disclaimer
*** As always - Read everything carefully and Flash on our own risk! ***
I can and will not take any responsibility for bricked phones or lost data.What do we need:
Rooted Device
FlashFire app from playstore
Flyme OS 6.7.4.11_beta_Global_Pro 6 Plus for Flashfire
Instructions:
Its recomnended to back up your data (Titanium backup, your fotos etc)in case of disaster.
Root:
Go to Meizu page and create and account. Enter a valid email as its needed to activate the account. if you already have an account, just skip this step.
Now go to Settings on your device and Select Meizu account, Log in with your new created account.
Go back and select Fingerprint & security , then select Root permission, scroll down and confirm. The device will reboot. Now its rooted but i recommend installing supersu because the built int root some times has failed for me.
Install SuperSu from playstore, open it and select Update su binary, choose Normal. wait until it finishes and reboot.
Now you have Root
Note: if you dont have Google Playstore, open meizu app store and search for supersu.
Install ROM:
Root your device
Install Flashfire from Playstore
Download This modified Flyme OS 6.7.4.11_beta_Global_Pro 6 Plus
Copy the downloaded ROM to Internal storage
Open Flashfire, give root permissions and click on the + button,
Select Wipe and then ok
Click again on the + button and choose Flash Zip / OTA
Select the Downloaded ROM from the file explorer and select Mount system read write. See these screens for more information:
Now you will see a screen with all the actions that will be done, select the action called Reboot and unthick the option Preserve recovery, leave Normal selected.
Finally click on FLASH and wait until the process ends.
Enjoy...
Optional:
You can Install gapps from flashfire along with the rom, just select Flash zip/ota and select Gapps zip, this way it will be installed after rom. Or you can use Google Installer which you can find in meizu appstore after reboot.
Note: For future updates, do not update the device from the Updates app included as it will donload the Gobal version of Flyme but it will fail because your device is still a chinese version.
How to go back to stock chinese ROM in case of disaster:
Download the latest version of chinese Flyme from: http://www.flyme.cn/firmwarelist-101.html#3
Turn off the device （hold power button until it turns off.
Hold Volume + button and power button at the same time until the phone vibrates. it will enter recovery mode.
Connect your device to your PC by usb, you will have access to a folder named Recovery. Copy the update.zip to this folder and wait for it to finish.
Go back to the device and select the options Upgrade System and Clear data.
Hit Start and wait until it finishes.
Click to expand...
Click to collapse
Hello everyone, thanks a lot bihariel for this guide.
I have successfully installed the beta with flashfire and it's all ok!
Some people say flashfy is not a very safe method, what do you think? I'm not an expert.
However, I did not go to the flymex account synchronization, now I've installed the closed beta apps yesterday and it works perfectly well!
We wait for the stable then!
Can you explain how you modified the update for the future? Thanks so much.
Are Alternative Methods to Flashfire? Type ADB?
In Italy a seller on his blog posted this guide, but I could not install it:
"The tutorial for installing firmware G in the Asian Meizu Pro 6 Plus smartphone is really very simple and does not require solid modding basics, you just have to be careful about installing ADB drivers correctly.
Load the battery completely before you begin the procedure and save all your important data
On your PC or on a Cloud as you will need to make the full factory reset.
Prerequisites Preinstalling Firmware G in Meizu Pro 6 Plus:
1-Smartphone fully charged
2-Any antivirus and / or firewalls disabled
3-Driver ADB properly installed, restart your PC after installation!
4-Enabled Root permissions through Flyme account (Fingerprint and Security Menu)
5-USB Debug Mode Enabled in Developer Options (Accessibility Menu)
G Firmware Installation in Meizu Pro 6 Plus:
Decompress the Meizu_Pro6plus_Flyme 5.2.7.0G.zip archive and copy it to the root folder
Of Meizu Pro 6 Plus the file system-i.img
Decompress the archive adb_tool.zip and in the folder obtained we select the file
Cmd.exe to open the command window
Write in the command window:
Adb shell
We give Send and permission to ADB through the pop-up that will appear on the Meizu Pro 6 Plus display
We will read in the shell @ Pro6Plus command window
WARNING: If the pop-up display does not appear, ADB drivers have not been installed correctly!
Write in the command window:
su
We give Send and permission of ADB SHELL root permissions through
The pop-up that will appear on the Meizu Pro 6 Plus display
We will read in the command window the symbol #
WARNING: If the pop-up display does not appear, root permissions are disabled!
Write in the command window:
Dd if = / sdcard / system-i.img of / dev / block / platform / 155a0000.ufs / by-name / system
We give Enter, we will see the cursor blink, we do not touch anything until the flash procedure
The system will not be completed and the screenshot message below will appear
Meizu pro 6 plus 01
Disconnect the usb cable from the Meizu Pro 6 Plus and restart it by holding down the button
Power for a few seconds, the startup process will take a few minutes, do not alarm and we start booting.
When the terminal is started we go in
Settings> About phone> Storage> Factory data reset>
We see Factory reset and Format internal storage>
Select START RESET"
I put into google translate, if you want the original in italian language let me know.
mr.mgmg said:
so,how we can do that?
i think the 6.7.4.11_beta_Global no stable yet
u can edit the Flyme 5.2.7.0G?
Click to expand...
Click to collapse
I read in some chinese forum that we cant downgrade but...
Download the ROM 5.2.7.0G, open the zip and editthis file \META-INF\com\google\android\updater-script
You can use this picture as a guide, delete the red lines:
Tony72 said:
Hello everyone, thanks a lot bihariel for this guide.
I have successfully installed the beta with flashfire and it's all ok!
Some people say flashfy is not a very safe method, what do you think? I'm not an expert.
However, I did not go to the flymex account synchronization, now I've installed the closed beta apps yesterday and it works perfectly well!
We wait for the stable then!
Can you explain how you modified the update for the future? Thanks so much.
Are Alternative Methods to Flashfire? Type ADB?
In Italy a seller on his blog posted this guide, but I could not install it:
"The tutorial for installing firmware G in the Asian Meizu Pro 6 Plus smartphone is really very simple and does not require solid modding basics, you just have to be careful about installing ADB drivers correctly.
Load the battery completely before you begin the procedure and save all your important data
On your PC or on a Cloud as you will need to make the full factory reset.
Prerequisites Preinstalling Firmware G in Meizu Pro 6 Plus:
1-Smartphone fully charged
2-Any antivirus and / or firewalls disabled
3-Driver ADB properly installed, restart your PC after installation!
4-Enabled Root permissions through Flyme account (Fingerprint and Security Menu)
5-USB Debug Mode Enabled in Developer Options (Accessibility Menu)
G Firmware Installation in Meizu Pro 6 Plus:
Decompress the Meizu_Pro6plus_Flyme 5.2.7.0G.zip archive and copy it to the root folder
Of Meizu Pro 6 Plus the file system-i.img
Decompress the archive adb_tool.zip and in the folder obtained we select the file
Cmd.exe to open the command window
Write in the command window:
Adb shell
We give Send and permission to ADB through the pop-up that will appear on the Meizu Pro 6 Plus display
We will read in the shell @ Pro6Plus command window
WARNING: If the pop-up display does not appear, ADB drivers have not been installed correctly!
Write in the command window:
su
We give Send and permission of ADB SHELL root permissions through
The pop-up that will appear on the Meizu Pro 6 Plus display
We will read in the command window the symbol #
WARNING: If the pop-up display does not appear, root permissions are disabled!
Write in the command window:
Dd if = / sdcard / system-i.img of / dev / block / platform / 155a0000.ufs / by-name / system
We give Enter, we will see the cursor blink, we do not touch anything until the flash procedure
The system will not be completed and the screenshot message below will appear
Meizu pro 6 plus 01
Disconnect the usb cable from the Meizu Pro 6 Plus and restart it by holding down the button
Power for a few seconds, the startup process will take a few minutes, do not alarm and we start booting.
When the terminal is started we go in
Settings> About phone> Storage> Factory data reset>
We see Factory reset and Format internal storage>
Select START RESET"
I put into google translate, if you want the original in italian language let me know.
Click to expand...
Click to collapse
I can tell you that for now the safest method is flashfire because it install the ROM in same way that the Recovery does, that is: it wipes the system partition and installs the ROM with correct permissions.
The method you mention is more risky( to get a bootloop) because it overwrites the ROM files directly over the System partition with the OS still running on phone. This drives into a system hang freeze. of course you have to turn it of by holding power button until it restarts. Then you have to go recovery and do a factory reset if you get bootloop.
I tried this method before Flasfire but it gave me bootloop so then i used Flashfire because it do the same job that Recovery does.
About the modifications, its really simple. Just open \META-INF\com\google\androidupdater-script and delete all the lines in red in this picture (these lines check if your phone is Chinese version or global and update the firmware files.)
Also you can delete the files related to those lines just for safety (boot.img, recovery.img, logo.bin, ldfw, bootloader..)
bihariel said:
I can tell you that for now the safest method is flashfire because it install the ROM in same way that the Recovery does, that is: it wipes the system partition and installs the ROM with correct permissions.
The method you mention is more risky( to get a bootloop) because it overwrites the ROM files directly over the System partition with the OS still running on phone. This drives into a system hang freeze. of course you have to turn it of by holding power button until it restarts. Then you have to go recovery and do a factory reset if you get bootloop.
I tried this method before Flasfire but it gave me bootloop so then i used Flashfire because it do the same job that Recovery does.
About the modifications, its really simple. Just open \META-INF\com\google\androidupdater-script and delete all the lines in red in this picture (these lines check if your phone is Chinese version or global and update the firmware files.)
Also you can delete the files related to those lines just for safety (boot.img, recovery.img, logo.bin, ldfw, bootloader..)
Click to expand...
Click to collapse
Thanks a lot!, I'll read all as soon I could
BE Careful
Removed
bihariel said:
I read in some chinese forum that we cant downgrade but...
Download the ROM 5.2.7.0G, open the zip and editthis file \META-INF\com\google\android\updater-script
You can use this picture as a guide, delete the red lines:
Click to expand...
Click to collapse
i flashed the 6.7.4.11 but i have problem when i open the front camrera and close the camrea not open again
now i want back to the 5.2.7.0G but when i want edit the script is Different about your picture.
u can edit the just script and upload and then i will add to zip
mr.mgmg said:
i flashed the 6.7.4.11 but i have problem when i open the front camrera and close the camrea not open again
now i want back to the 5.2.7.0G but when i want edit the script is Different about your picture.
u can edit the just script and upload and then i will add to zip
Click to expand...
Click to collapse
Salam,
The camera bug is weird, i don't have that bug, i open the camera ( front and back) many times and it works perfectly, maybe you changed something in camera setting ( erasing camera app data should help)
Anyway, the script is exactly the same as mine, its just you are using and editor with Arabic orientation.
Just use the app Notepad++( google it) and open it in English lang.
If not, just upload the script for me and i will edit it.
bihariel said:
Salam,
The camera bug is weird, i don't have that bug, i open the camera ( front and back) many times and it works perfectly, maybe you changed something in camera setting ( erasing camera app data should help)
Anyway, the script is exactly the same as mine, its just you are using and editor with Arabic orientation.
Just use the app Notepad++( google it) and open it in English lang.
If not, just upload the script for me and i will edit it.
Click to expand...
Click to collapse
ealaykum alssalam
thanks bro for help
i flashed the rom without change anything in script and its work
u know when the stable rom will out?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome to the NitrogenOS Q&A Megathread. Here you can find answers for the most popular problems and questions about NitrogenOS. I started this thread, so that new users don't repeatedly ask the same questions multiple times. While I am fairly new to coding in Java, I can definitely say I know a lot about Android phones and NitrogenOS, but you'll have to trust me on that. If you need any more help, you can even PM me and I'll try to reply as soon as I can.
You can find the original NitrogenOS thread here.
ROM info
Developer: xyyx
Latest Android version: 8.1 Oreo
NOS Download (latest): https://sourceforge.net/projects/nitrogen-project/files/kenzo/kenzo_test/8.1/
Bugs and updates
- A (very) small amount of users reported Google Dialer not working properly while installed through OpenGapps or the Play Store, you can still use stock dialer
1. Test or stable?!?!
Test in this case doesn't mean less stable. xyyx named the two versions a little confusingly.
Test means Oreo (Android 8.0 and 8.1) and Stable means Nougat (Android 7.1.2).
So let's make this a little less confusing:
Oreo (8.0) builds -> Download from here
Oreo (8.1) builds -> Download from here
Nougat (7.1.2) builds -> Download from here
2. Youtube PiP (Picture in Picture mode)
Google has patched PiP a long time ago, so it doesn't work with the latest Youtube releases. The last official release working with PiP is 12.34.55, which you can download from ApkMirror.
My preferred option however is iYTBP (injected YouTube Background Playback), a modified version of Youtube, but it gets a little confusing as there are multiple options.
You can download it from this thread.
Now the tricky part - choosing the right version. I always prefer the Vanced version, which can be found in the 2nd post. Again you have multiple options, but I will not go through all of them since they are explained pretty good in the post itself. While iYTBP enables PiP, it also blocks ads and adds a lot of useful settings and new updates come very frequently. There are multiple installation methods, but I prefer the Magisk one, since it offers options like detaching the Youtube app from Play Store. What this means is, that you don't have to disable auto-updates and it will not bug you to constantly update it.
You can try these methods:
Magisk Module (Easiest):
1. Open Magisk Manager
2. Go to Downloads
3. In the search bar type "Youtube", you should see two results
4. Choose either the normal or the black theme (I personally prefer the black one)
5. Press the download arrow and then "Install"
6. Wait for a while (it's a big package to download and unpack)
7. Reboot
This is by far the easiest option and the module is updated fairly often.
Manual:
1. Delete or uninstall any previous release of Youtube. If you installed it as a system app, disable it or delete the /system/app/YouTube folder. If you had to delete the folder, reboot.
2. Download the Youtube apk
3. Make a folder called YouTube (watch the caps!)
4. Move the apk to this folder and rename it as YouTube (again with the caps)
5. Copy/move the folder to /system/app (The directory should look like this: /system/app/YouTube/YouTube.apk)
6. Reboot
Magisk (manual):
1. Download the Youtube apk, the iYTBP universal installer and the use_this_settings.sh file. Check that they are in the downloads folder.
2. Edit the use_this_settings.sh file if you want. Since we're installing from Magisk, you'll need to set MAGINSTALL to YES (MAGINSTALL="YES"). I usually also enable detach (DETACH="YES"). This will make the Play Store think Youtube isn't installed and it will not bug you for updates.
3. Open Magisk Manager, go to Modules and press the + button. Now select the universal installer zip and flash it in Magisk.
4. Reboot
Recovery method:
Same as for Magisk, but MAGINSTALL is set to NO (MAGINSTALL="NO"). In case you didn't read the Magisk method, here is the recovery method...
1. Download the Youtube apk, the iYTBP universal installer and the use_this_settings.sh file. Check that they are in the downloads folder.
2. Edit the use_this_settings.sh file if you want. I usually enable detach (DETACH="YES"). This will make the Play Store think Youtube isn't installed and it will not bug you for updates.
3. Reboot to recovery, go to Install and choose the universal installer zip, flash it.
4. Reboot
If you open a video in fullscreen mode and press the home button, it should open it in PiP mode. If you want to change some advanced settings, you can go to your Account (the round icon with your profile picture) -> Settings -> iYTBP Settings
3. Goodix & FPC - What are they
Goodix and FPC are two different types of fingerprint sensors (or rather sensor manufacturers). They both work in Android 8.1 builds. Custom kernels or mods may break the fingerprint sensor functionality.
4. Rooting
tl;dr: rooting NitrogenOS is the same as rooting any other custom rom, just flash Magisk, SuperSU, phh's superuser or anything else.
Now for the extended version.
Magisk:
Magisk is a great open-source root manager, developed by topjohnwu. It features a feature rich app, but most people prefer it because of it's "modules", packages which can do a bunch of things, from installing apps like Viper4AndroidFX or Dolby Atmos, to modifying system settings, like the volume steps increase. Magisk also features an option called "Magisk Hide", which can bypass Android's SafetyNet.
Check out the Magisk thread.
You can directly download the latest version of Magisk from https://tiny.cc/latestmagisk
SuperSU:
SuperSU is an alternative root manager. It used to be developed by Chainfire, but has recently been purchased by another company. I still prefer Magisk, but SuperSU is a great alternative for new users. My problem with it though is, that it is not open-source and the new buyer is pretty secretive so I don't really trust them.
Check out the SuperSU website for the download link.
phh's SuperUser:
Another open-source root manager, but the great thing about this one is, that it's very minimalistic and very small in size.
Check out the SuperUser thread and phh's Build Bot.
5. Google Apps (gapps)
Google apps are a vital part of custom roms. You might not know this, but AOSP and CM based roms are made from Google source code. Google actually makes Android open-source, but the Play Store and other Google apps are not. That's why roms like NitrogenOS do not come with the Play Store preinstalled. That is where Open Gapps come in. They are prepackaged apps, updated almost daily. They come in various sizes and versions, but they can all be flashed in TWRP like a normal zip file.
Platform: arm/arm64/x86/x86_64 - RN3 has an arm64 processor (Think of it as a 64-bit CPU for phones)
Android: 8.0/7.1/7.0... - This is the android version, NOS is Oreo based so choose 8.0 (Or 7.1 for Nougat) [Check below for OpenGapps 8.1]
Variant: This is where it gets complicated. There are a LOT of versions to choose from. For more in-depth resources check the OpenGapps' package comparison.
But OpenGapps are a lot more customisable, to the level where you can choose individual apps you want installed. The easiest way to do this, is to flash the Aroma package, which enables you to choose exactly which packages you want installed. Another option is to configure any of the selected packages using a gapps-config.txt file. You can learn more about that in the Advanced Features and Options section.
You can download daily builds for any Android version from https://opengapps.org/
6. TWRP (Recovery)
A recovery is a partition, used to flash files like ROMs, gapps and any other modifications. You do (in most cases) need an unlocked bootloader to use it. Unlocking your bootloader will not be described on this thread, as there are a lot of resources for our device.
Official TWRP - This is the official TWRP (Team Win Recovery Project) for our device
You can find the latest updates for TWRP on their website.
Red Wolf - This is a modified version of TWRP, my absolute favourite because of it's custom features.
Flashing TWRP:
If you don't have a custom recovery installed and you have unlocked your bootloader, then download the latest version of your preferred recovery and follow these steps:
1. Download Minimal ADB and Fastboot on Windows, or use sudo apt install android-tools-adb android-tools-fastboot if you're on Linux.
2. Enable USB Debugging (Settings -> About phone -> Press "Build number" 7 times to enable Developer options). You should find the Developer options in settings above "About Device". Find USB Debugging and enable it.
3. Connect your PC to the phone via a cable. Open Minimal ADB and Fastboot (which will open CMD) or Terminal on Linux and type this (same for both OSs): adb devices. Select "Always allow on this computer" and confirm access on your phone.
4. Reboot your phone to fastboot/bootloader (By holding Power and Vol-, releasing the power button after a vibration and holding the Vol- button until you see the Xiaomi mascot).
5. Type (In CMD/Terminal): fastboot devices, to confirm if the phone has been recognised, then fastboot flash recovery /path/to/recovery.img
6. After it has succesfully finished, remove the cable and reboot directly to recovery (Power and Vol+, release power after vibration, but keep holding the Vol+ button until you see the TWRP or RedWolf logo).
If you do already have a custom recovery installed and just want to update it, flash the .img or .zip file in your already installed recovery and select "Reboot to recovery".
7. NOS asks me for a password after flashing?!!?!?
This is actually not NitrogenOS's fault, it's a byproduct of your previous rom, most often MIUI. What this means is, that your internal storage is encrypted and the only way to fix this, is to backup everything on your internal storage, which you can do by connecting your phone to your pc while in recovery. You should be able to access the phone's storage and move the files from there. If you for some reason can't do that, you can still put in an sdcard and copy the files to it in TWRP. Bottom line, backup the files and then go to "Wipe" and find the "Format data" button. You might see a "wipe data" button, but this is not the same. When you "wipe data" you are wiping your system, cache, dalvik cache and data partitions, but formatting data will format your internal partition as well and thus remove the encryption.
You can finally reflash NOS and gapps or whatever other modification you want.
8. Firmwares
Check out this link to download the latest firmware for our device.
What is firmware? - It's what connects hardware to software (don't confuse it with a kernel). It's what, for example, makes the camera work.
Do I really need firmware - Yes (but it's already installed, even after completely wiping the stock rom, since it's on separate partitions).
Do I need the most up-to-date firmware - Actually no, the only difference you will notice is in the signal and WiFi strength. If yours are good enough, you don't need to update, otherwise feel free to download the newest version from the link above.
What is emmc_appsboot.mbn? - It's a bootloader update. Bootloader or fastboot is the partition in which you have unlocked your bootloader and flashed the recovery. If you have officially unlocked your bootloader, then you can flash firmware with emmc_appsboot.mbn, but if you have unofficially unlocked your bootloader, do not flash these files as they will re-lock it. But you can still flash the version without emmc_appsboot.mbn.
Kenzo? Kate? - Kate devices are the same as kenzo ones but are a little bigger.
Some comparisons:
Kenzo
Size: 150 * 76 * 6.85 mm
Weight: 164g
Kate
Size: 152 * 76 * 6.85 mm
Weight: 167g
Model numbers:
Kenzo: 2015116
Kate: 2015161
Kate devices are 32/3 GB, and some kenzo devices are as well (some are 16/2 GB), not really sure about this part.
Global stable or developer? - Most people use developer roms, but again, this is not the actual ROM, just the firmware extracted from the rom, it doesn't really matter which one you choose.
When do I need to flash firmware? - If you're coming from MIUI8 (or 9), then you probably have the newest firmware. In this case you don't need to flash it, because MIUI roms already have firmware included in the update. If you're coming from a CM or AOSP based rom you also probably don't have to flash it, but I suggest you update it just in case. If your signal is good enough though, there really is no need.
9. How to flash the rom
Flashing is pretty straight forward. Just go to the Install section of TWRP and flash it like any normal zip, nothing special.
If you're coming from MIUI, then the full procedure is this:
1. Unlock your bootloader (google it, useless explaining it here)
2. Flash TWRP
3. Make a full device backup (Nandroid backup)
4. Copy or move all important files from the internal storage to an sdcard or your pc
5. Format data, or in other words, wipe EVERYTHING (excluding external storage) - This will delete all your photos and anything else in internal storage
6. Flash the latest NOS "test" build (Oreo)
7. Flash gapps (I recommend opengapps.org, check above)
8. Reboot to system
10. OTA?
What is OTA? - OTA means Over The Air (Update)
Does NOS have OTA? - Actually yes and no, newer updates (from March 2018 on) do have partial OTA (it does check for updates and notify you, while also giving a direct download link to SourceForge, but you will have to manually flash every update in your recovery.
What about incremental updates? - Sorry, but no. You'll have to download full packages every time. If you have a bandwidth cap then just download an update every week or two, you can check the changelog to see if you think it's worth updating to.
11. Google Camera
If you're having problems with the official Google Camera or just want some added features then look no further than modded camera apps. Check out this thread by emime12, it's very frequently updated and features a lot of different camera mods, including Google Camera, MIUI Camera, MOTO Camera and many more.
Recommended settings:
3x3 Grid - For better photos
I usually disable "Save location" and "Camera sounds"
Model: Pixel XL (corr) - default
Config camera HDR+: NEXUS 6
HDR+ parameters: Default
Panorama resolution: High
Advanced: Enable both
Experimental: I usually leave this disabled but it's your choice.
Back camera video resolution: UHD 4K (30 fps)
In case your camera doesn't work check if you have these two files and delete them:
/System/framework/com.google.android.camera.experimental2016.jar
and
/System/etc/permissions/com.google.android.camera.experimental2016.xml
Credits go to: @emime12 and Njaiker.
You can find more info about problems and updates on emime12's thread.
Settings may differ a lot, so check emime12's recommended or just test until you find ones that work for you
12. RAM Management - Low free RAM
Android's RAM (Read Only Memory) management doesn't work like Windows'. Android manages RAM very well, "Free RAM is wasted RAM" is a very common expression on XDA. Android loads the first couple of apps into the RAM and priorities the open one. More used ram means more apps loaded in ram which means faster load times. Don't worry about it too much and just enjoy the fast loading speeds.
13. VoLTE?
VoLTE should work on Android 8.1. Magisk, Viper or any other mods may break it.
14. Custom kernels
While there are a lot of custom kernels, I suggest you stick with the stock one, as it is made specifically for NOS and thus it is the most stable. If you still want a custom kernel, you can try Radon or Agni but they might break VoLTE or your fingerprint sensor.
Agni XDA Thread - By psndna88
Radon XDA Thread - By Umang96
15. Daily driver or not?
Yes, NitrogenOS Oreo is very stable, definitely enough for a daily driver. It is the best Oreo rom for our device (in my opinion), as it offers just the right amount of customization and stability.
15. GPS
Some users have reported low accuracy, but you should be fine if you turn on High Accuracy mode and/or install Faster GPS.
Update: In recent updates GPS shouldn't be a problem anymore as xyyx has fixed it, but some users have still reported low accuracy.
16. Viper4Android FX
(There may be other ways, but I haven't tested them yet so I can't confirm if they work) By far the easiest way to install Viper4Android FX is using Magisk. There is Magisk module called ViPER4Android FX Materialized. Download and install that module from the Magisk repo, choose your preferred installation option (By pressing Vol+ or Vol- to select which version you want installed and if you want it materialized - for newest materialized version press Vol+ 2 times) and finally reboot. Try playing some music and open the Viper app. Turn on the "Master Power" switch and the "Playback Gain Control" (the easiest way to tell if it worked). If after a little time the volume increases, it means that Viper4Android FX works. If not, press the three dots and choose "Exit" (without turning off the master power or gain control). Now open the app again and it should work. You can also check that in the side menu under "Driver status", if it's enabled and processing, then everything works.
You may or may not have to exit and re-enter the app after reboot to enable processing (in my case I had to).
I would show you my recommended settings (as requested), but to be honest I only use:
Headset
Viper Bass (Natural bass, 40 HZ frequency, 8 dB)
Viper Clarity (Natural, 6 dB)
Sometimes I use Field surround with default settings
Phone speakers
eXtra loud (Slight, 4x max gain, -1.9 dB max output)
Bluetooth device
Playback gain control (Moderate, 6x max gain, -1.9 dB max output)
If I'm at a party with my bluetooth speaker I pump it up to Extreme and 8x max gain
Viper Bass (Natural, 40 HZ frequency, 8 dB), 17 dB for parties
Viper Clarity (Natural, 3.5 dB)
I don't use equalizers or if I do, they are song-specific. I also don't USB/Dock, so I can't recommend anything there.
Of course these settings can vary depending on the song, so choose those, which you like the most and don't stick with just those I chose, try all the functions to see which you prefer.
17. AdAway (Root)
AdAway is a great open-source root ad blocker, which can automatically download and update sources and works by adding those to the hosts file. It work well on the internet, but also inside apps (most of the time).
Check out the official AdAway website. You can also download it from F-Droid.
Adaway v3.2 (60) (direct download link)
Adding custom host sources:
Go to "Host sources" and add your own sources or check out these: AdAway's host sources
Be careful when adding all of them, since some can block legitimate links like goo.gl.
AdAway also offers an option to scan for Adware, which can be found under "Scan for adware". This will bring up a new window, press "Start scanning". If you don't need/want the mentioned apps you can uninstall them, but AdAway can't block their ads.
You can also check out my recommended settings:
wow,really appreciated that sir., it is very helpful specially for those who wanted to try, flashing rom or any mods on their device like me. thanks and keep up the good work sir God bless!
i think i can add up little bit here.
1) u r on miui & u want to flash nitrogen so u go to recovery and backup ur current rom in case if u dont like nitrogen u can restore back to miui with all ur setting & app. now assume u r on nitrogen, after 4-5 days u dont like nitroge & u decided to come back to miui, so u go to recovery and restore yr backup that u have taken earlier. after success booting the screen with pin or password will appear. so u would enter/guess any previous password, pin u used earlier but it will not open. here the real problem come. i have also faced same issue & got upset searching endless solution on google . u will get mad on u. security bypass will also not work. after spending endless hour i come with solution. download aroma zip search on net. flash it through recovery this will help u to get in system its ike file manager. then head to data, system and delete all file u see below
locksettings.db, locksettings.db-shm, locksettings.db-wal, gatekeeper.password.key, gatekeeper.pattern.key
and then restart, yr problem would be solve.
2) nitrogen os does not support video calling via jio. none custom rom other then then miui support.
3)xposed is not available for oreo.
4)i have used nitrogen oreo for about 2 weeks it is stable but not as miui. some time r net would not work, jio call drop, lagging u have to restart on every time u faced problem. i suggest that wait for some time to roll out nought port for kenzo with zero bug & this will happen soon.
saifuk said:
i think i can add up little bit here.
1) u r on miui & u want to flash nitrogen so u go to recovery and backup ur current rom in case if u dont like nitrogen u can restore back to miui with all ur setting & app. now assume u r on nitrogen, after 4-5 days u dont like nitroge & u decided to come back to miui, so u go to recovery and restore yr backup that u have taken earlier. after success booting the screen with pin or password will appear. so u would enter/guess any previous password, pin u used earlier but it will not open. here the real problem come. i have also faced same issue & got upset searching endless solution on google . u will get mad on u. security bypass will also not work. after spending endless hour i come with solution. download aroma zip search on net. flash it through recovery this will help u to get in system its ike file manager. then head to data, system and delete all file u see below
locksettings.db, locksettings.db-shm, locksettings.db-wal, gatekeeper.password.key, gatekeeper.pattern.key
and then restart, yr problem would be solve.
2) nitrogen os does not support video calling via jio. none custom rom other then then miui support.
3)xposed is not available for oreo.
4)i have used nitrogen oreo for about 2 weeks it is stable but not as miui. some time r net would not work, jio call drop, lagging u have to restart on every time u faced problem. i suggest that wait for some time to roll out nought port for kenzo with zero bug & this will happen soon.
Click to expand...
Click to collapse
Thanks for the tip, will update the thread.
@JustMeErazem volte on 2nd sim works well. I myself use it. After flashing magisk just v need to hide root from all system apps to make sure volte works flawless even after reboot. Plz edit it in the description. I hav been using nos since many time so with experience i am giving my feedback. Thanks?
@saifuk what kind of nougat port u are expecting of ?
Aditya1011 said:
@JustMeErazem volte on 2nd sim works well. I myself use it. After flashing magisk just v need to hide root from all system apps to make sure volte works flawless even after reboot. Plz edit it in the description. I hav been using nos since many time so with experience i am giving my feedback. Thanks
Click to expand...
Click to collapse
I haven't rooted my phone, VoLTE still not working.
---------- Post added at 03:37 PM ---------- Previous post was at 03:34 PM ----------
@justmerazem Change VoLTE point again to previous. I installed NOS on mine & my other two friends' phone. They've not used magisk or superSU nor me. But VoLTE doesn't work on 2nd Sim for us.
AtomR said:
I haven't rooted my phone, VoLTE still not working.
---------- Post added at 03:37 PM ---------- Previous post was at 03:34 PM ----------
@justmerazem Change VoLTE point again to previous. I installed NOS on mine & my other two friends' phone. They've not used magisk or superSU nor me. But VoLTE doesn't work on 2nd Sim for us.
Click to expand...
Click to collapse
Flash latest firmware of developer rom. And volte is sure shot working.
Aditya1011 said:
Flash latest firmware of developer rom. And volte is sure shot working.
Click to expand...
Click to collapse
Mate, I'm already on 7.9.22 firmware. Lots of people are reporting it. Yours is working, must be some kind of random.
@Aditya1011 Mate, what happened? No reply? Huh. Latest firmware. No magisk, no any kind of root. No sound mod. Still Volte not working on 2nd Sim on 3 different Kenzos.
@JustMeErazem Please include in your post that VoLTE is indeed buggy.
how to install via dualboot patcher as secondary rom?
AtomR said:
@Aditya1011 Mate, what happened? No reply? Huh. Latest firmware. No magisk, no any kind of root. No sound mod. Still Volte not working on 2nd Sim on 3 different Kenzos.
@JustMeErazem Please include in your post that VoLTE is indeed buggy.
Click to expand...
Click to collapse
Idk bro y that happening to u. Flash miui EU rom n thn the nos rom. Mayb that should work.... Bcuz I had done that for the 1st time whn my volte wasn't working at any cost. Best of luck.
smjhh said:
how to install via dualboot patcher as secondary rom?
Click to expand...
Click to collapse
I don't think dual boot patcher supports oreo roms. Try asking on their thread to see if it does.
Google HDR camera 5 or 5.1 work with this ROM??
sagar13190 said:
Google HDR camera 5 or 5.1 work with this ROM??
Click to expand...
Click to collapse
Read op!
I tried google HDR camera v5 n v5.1 on lineage Oreo, MAOSP Oreo nitrogen Oreo ROM bt its not working...bt in ROM based on nogut 7.1.2 its work great
sagar13190 said:
I tried google HDR camera v5 n v5.1 on lineage Oreo, MAOSP Oreo nitrogen Oreo ROM bt its not working...bt in ROM based on nogut 7.1.2 its work great
Click to expand...
Click to collapse
It works for many users. Did you flash my zip or install an apk?
Sim card detection issue
Sometimes nitrogen os Oreo does not detect sim cards after reboot so I changed ROM and installed aosp extended. I know that Xyyx has already mentioned this as bug. Due to this bug it is not daily driver. Hope xyyx will fix this as soon as possible. If you have solution, please share it.
dhavalmehta said:
Sometimes nitrogen os Oreo does not detect sim cards after reboot so I changed ROM and installed aosp extended. I know that Xyyx has already mentioned this as bug. Due to this bug it is not daily driver. Hope xyyx will fix this as soon as possible. If you have solution, please share it.
Click to expand...
Click to collapse
Dude, it's really not a big problem, it detects it like 95% of the time. Just reboot and you're done. Or wait about 2 min and it should detect it. You could also just remove the sim and reinsert it. But since the latest few updates for me it gets detected 100% of the time. So update to 28/10/2017 build and you should be fine.
@JustMeErazem You're giving flase info. to others saying that VoLTE works on both sim. Actually, it works only on first sim. Tried, tested on 3 different Kenzo's. Clean flashed.
Conclusion: VoLTE doesn't work on 2nd sim.
I guess global version will come within 2 days.
http://www.oneplusbbs.com/forum.php?mod=viewthread&tid=3876301&mobile=2
Step by Step Guide - Android 8.0 Chinese beta. Clean/dirty flash lock/UL BL.
Hello Guys,
To make things easy heres a step by step guide to install the chinese oreo beta on locked/unlocked Bl for the 5T
So I got my hands on the android oreo chinese beta (H2OS) and flashed it on my oneplus 5t which was on a locked bootloader and running stable 4.7.6 with star wars theme enabled. Here's a step by step guide to install H2os Oreo beta rom wtihout losing any data.
WARNING : BACKUP - BACKUP - BACKUP and flash at your own risk. I would not be responsible for any loss.
METHOD 1 : FOR LOCKED/UNLOCKED BL BUT WITH STOCK RECOVERY
1) Download the rom from this link : https://goo.gl/4nPrxx
2) Ensure you have backed up all your important data and make sure you have atleast 50% battery.
3) Copy the downloaded zip to phones internal memory (make sure its in the main directory and not in any folder.
4) Go to settings > system updates > top right hand corner tap the settings icon > tap local upgrade > tap on the downloaded file > tap update now and wait for it to finish installing the update. ( first boot will take 8 to 10 minutes so please dont panic.
5) Once first boot is done you may have a force close for 1 or 2 apps just uninstall them and reinstall from the play store and you are good to go. Also star wars theme continues to work and all basic functions work as expected.
6) If you want a clean install or having many force closures please perform a factory reset and everything should be resolved.
https://forum.xda-developers.com/oneplus-5t/how-to/step-step-guide-android-8-0-chinese-t3726772
Yup, I'm downloading now. This should be fun.
Mike02z said:
Yup, I'm downloading now. This should be fun.
Click to expand...
Click to collapse
When you're done, can you tell us what exactly has changed? I went to the chinese page, but google translator wasn't so helpful tbh.
devil188 said:
When you're done, can you tell us what exactly has changed? I went to the chinese page, but google translator wasn't so helpful tbh.
Click to expand...
Click to collapse
This update ushered in based on the new Android O (8.0) hydrogen OS
【desktop】
- Optimized application shortcut menu
- Integrate icon options with app shortcuts
- Shot on OnePlus Add photos upload function
【system】
New shortcut settings panel design
- Android O new features, including but not limited to:
****1. Add Picture in Picture function
****2 new auto-fill (Auto-Fill) function
****3 new smart text selection (Smart Text Selection)
- Update Android system patch
Known Issues
1. WeChat fingerprint payment can not be used temporarily
2. Third-party applications may not compatible list, please download the attachment compression package. Android O may not be compatible with the application list. Rar (25.83 KB, Downloads: 364)
This a translation of the update. I used g translate. :good:
It seems to run OK. Obviously some stuff is still in Chinese. I tried to flash TWRP and TWRP booted but even after a clearing cache/Div the ROM then would not boot. I just got a white light.
For initial install I did a complete data format then loaded the stock recovery ,and the latest stable OOS, then flashed the Chinese O.. You do need to pull a PlayStore .APK and reload all the Google apps after a flash.
Unless this one is different than the one they have on their main site, it's not Oreo. I flashed it, tried flashing Gapps and Gapps said I had to flash appropriate Gapps for 7.1 :/
Very nice. Thanks for the write-up!
Already open beta 3 now.
Hi !
All i'm doing is sharing this piece of work of DarkJoker360 ! ALL Credits are on the main Thread .... I'M JUST SHARING !!!
Bugs :
Need further testing , please report your bugs in the original thread
- Audio output switching does not work ( example if you listen to music via speaker and plug in headphones , it does not switch to that output unless you change the rington stat ( from silent or vibrating to Ringing )
- Regular Magisk does not work , Please install magisk from original thread FAQ
What you need :
- A Hi6250 Device ( Check here : https://openkirin.net/devices/ )
- Fully Unlocked Device ( Bootloader AND FRP )
- Firmware Required : EMUI 8.X
- TWRP Recovery
- NotePad++
Download on original Thread Here
Before Flashing this rom !!!
We need to Modifiy the updater script
if you are on stock rom this shouldn't be a problem ( didn't test it ) but anyways , if we flash it right away there is a good chance to get an ERROR 7 Device not compatible or something on these lines , What we have to do is the remove the Assert checking on the updater-script :
-Please Check all the requirments and steps before executing this step , what we are doing is removing device verification and the zip will install no matter what on ANY Device which Can Result on a Hardbrick!
1/ Open The downloaded zip and navigate to Meta-INF/COM/google/android/updater-script
DO NOT OPEN IT USING NOTEPAD , Instead Use NotePad ++ Or some other text editing tool that does not change space Encoding
2/ After that you should see on first line "assert(get prop .....);" Remove all this line till the semi colon and save the file
3/ Copy rom to SD card !
4/ Reboot to recovery , Wipe Data / dalvik / cache
5/ Flash this rom and it should boot up flawlessly
6/ After rom Boots up , Go to setting / Developer options / Default USB configuration and chose file transfer so that your device would be recognized by your PC and other media hubs
GAPPS :
Here (ARM-64 Version 9.0 ) Pico is recommended : Google APPS
what difference from this than openkirin builds??
optionalmgrr.la said:
what difference from this than openkirin builds??
Click to expand...
Click to collapse
Openkirin provides stock EMUI camera with their build, and probably more stable ROMs
I really hope open kirin update their lineageos rom....
optionalmgrr.la said:
I really hope open kirin update their lineageos rom....
Click to expand...
Click to collapse
If they fix it patch something, they'll post it.
PalakMi said:
Openkirin provides stock EMUI camera with their build, and probably more stable ROMs
Click to expand...
Click to collapse
Not necessarily , as far as my experience this rom is as stable as the one provided by openkirin, i have to admit that i did not test their omnirom enough to judge .
I found this ROM to be much more stable and usable than the latest OmniROM from OpenKirin. I installed the Stock variant of OpenGApps and it ran flawlessly, even the Pixel Launcher. Nice work!