I finde what is wrong with my phone and why he wan't to connect on PC, but i still need your help
When i dial *#0808# and enter in USBSettings whn i set to MTP+ADB computer recognize the device, but when i need to start odin and put in donwload mode i need DM+MODEM+ADB for flash firmware but when i check this PC don't recognize my phone.I finde on internet that problem is for QualcomUSB settings but i don't know how to fix this
And sry for my bad english
Are you sure that you have downloaded Samsung USB drivers? If not then that's is what causing the problem and here is the solution:
1.download and install kies
2. Open kies
3. There must be an option to download the USB drivers
And here you go , you have fixed the issue
Sent from my GT-I9505 using Tapatalk
yahya wessam said:
Are you sure that you have downloaded Samsung USB drivers? If not then that's is what causing the problem and here is the solution:
1.download and install kies
2. Open kies
3. There must be an option to download the USB drivers
And here you go , you have fixed the issue
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
Drivers is not problem
I tryed with Kies drivers with other version of SamsungUSB driver, try to change computer with different operation system but problem still here :/
Problem is i think in modem.A problem occurred when i update my i9505 from android 4.4.2 to Lolipop and i searching on internet for this problem, but can't fix
Try using a different USB port on your computer. Odin sometimes gets very picky about the port it uses. Also, make sure you're using the original cable and not a hub. The symptoms you describe do not appear to be related to the modem settings, but to the PC itself.
Aahh i tryed different usb cable, port i tryed many computers and i think all win (Xp,Vista,Win7,Win8.1,Win10) :'(
One people here said that is problem in my hardware usb i bought new one and change but problem still here i don't have idea how to fix that
And again sry for my bad english
Related
PC Odin does not detect my Note in download mode and I think I may have a problem with the Windows 7 64-bit USB drivers.
When I connect the Note to my PC it automatically tries to install the Note drivers but fails to install MTP (see attached picture).
I've installed the drivers using Kies but that does not help.
I've googled for a solution but cannot find one. Does anyone here know the answer?
Many Thanks
Gaugerer said:
PC Odin does not detect my Note in download mode and I think I may have a problem with the Windows 7 64-bit USB drivers.
When I connect the Note to my PC it automatically tries to install the Note drivers but fails to install MTP (see attached picture).
I've googled for a solution but cannot find one. Does anyone here know the answer?
Many Thanks
Click to expand...
Click to collapse
download kies from samsung for win, install in yr pc, it will install the drivers. of cos u can find and install the drivers separately but in view u post a simple question here, i doubt that will be easy path for you.
Sent from my GT-N7000 using xda premium
lewisteo said:
download kies from samsung for win, install in yr pc, it will install the drivers. of cos u can find and install the drivers separately but in view u post a simple question here, i doubt that will be easy path for you.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Thanks for your reply. I've run Kies which installed the drivers but I still get the error shown in the attached thumbnail. I haven't tried installing the drivers manually because I don't know how to do that.
I've just tried updating Kies and using it to install Windows USB drivers and now I don't get an error when connecting Note to PC (see attached thumbnail) but Odin still cannot see Note in download mode.
Gaugerer said:
I've just tried updating Kies and using it to install Windows USB drivers and now I don't get an error when connecting Note to PC (see attached thumbnail) but Odin still cannot see Note in download mode.
Click to expand...
Click to collapse
Re-install odin or find another version of it.
In case still no luck, then try this tool from Adam Outler:
http://forum.xda-developers.com/showthread.php?t=1257434
forest1971 said:
Re-install odin or find another version of it.
In case still no luck, then try this tool from Adam Outler:
http://forum.xda-developers.com/showthread.php?t=1257434
Click to expand...
Click to collapse
Thanks for your reply. It seems I have two solutions available and that is to try installing my original UK ROM over my German ROM in recovery mode. Or changing the CSC to match the German ROM to see if that helps. What do people think?
Just need to be careful about unsafe ICS kernel which they have warned in the sticky threads.
Also make sure kies isn't running when you try Odin, might be hogging the connection.
Sent from my GT-N7000 using Tapatalk 2
also try to use other usb port.
Thanks for all the replies. I have changed my UK CRC code to Germany ODT to match my XXLPY German ROM and I can now use Kies for updating firmware. But I still cannot get PC Odin to detect my Note and I so will continue to look for a solution for that problem.
I am still investigating why Odin does not detect my Note and one reason often suggested is bad Note drivers. So I connected my Note to the PC and then opened "Devices and Printers" in the Windows control panel where there was a Note icon. I right-clicked on the icon to get the properties and I attach thumbnails of drivers which show the drivers details and say the drivers are working normally.
I'm using 64bit Windows 7 and I would be grateful if someone could compare their drivers information with mine to see if there is any difference.
Since you wrote kies detects your phone, it is related to drivers.
German/Uk firmware/CSC is not the reason.
When I connected my phone in download mode for the first time, my PC and Netbook installed additional drivers automatically (not from windows updates).
As I wrote in your other thread SAMSUNG_USB_Driver_for_Mobile_Phones.exe is all you need to install to get necessary drivers.
Copy it to your desktop and get rid of kies.
Reboot and install SAMSUNG_USB_Driver_for_Mobile_Phones.exe
Reboot again.
It should work fine.
Just a hint - make sure you're using USB1.0/2.0 port. No idea about your port, but for me anything flashing related via USB3.0 always fails.
I have finally managed to flash the UK ROM on my Note and I wanted to change the CSC code from the German one ODT to the UK one but when I try there is only one chice and that is ODT. How can I get a list of choices which includes the UK CSC?
Hi
I Have Samsung Galaxy S.
I Have Installed Paranoid Custom ROM On My Device Now I Need To Flush The Original ROM
But I have Problem : When i connect my phone to pc the phone doesn't show any thing any connection massage and even if i enter the phone in downloading mode the pc and the phone doesn't show show any thing
Please I Need help i can't flash any stock rom please help:crying::crying::crying::crying:
Hi Syrian Eagle,
You should
Boot into "Download Mode"
start odin / heimdall
connect with computer via USB
load Stock firmware files
click on "Flash"- / "Start" - Button (I can't remember how is called)
http://forum.xda-developers.com/showthread.php?t=1637966
You could use this tutorial..you'll find package with Samsung drivers etc..make sure you have uninstalled old drivers & rebooted before installing new ones.
Also make sure you have working USB cable etc.
Sent from my GT-I9000 using Tapatalk 2
I forgot to post links
Here will you find Stock Firmwares
http://cur.lv/2j5o
Flash Guide
http://cur.lv/2j5p
Drivers
http://cur.lv/2j5q
Flashprograms
http://cur.lv/2j5r
Service Manuals
http://cur.lv/2j5s
diklooc said:
Hi Syrian Eagle,
You should
Boot into "Download Mode"
start odin / heimdall
connect with computer via USB
load Stock firmware files
click on "Flash"- / "Start" - Button (I can't remember how is called)
Click to expand...
Click to collapse
Thanks for your help but my problem is when i connect my phone in download mode or regular mode the pc doesn't see my phone and my phone doesn't say any thing (like if he is not connected) i think not a driver issue because previously i connect the phone into ODIN but now after flushing the paranoid ROM this problem appear .
Kurre said:
http://forum.xda-developers.com/showthread.php?t=1637966
You could use this tutorial..you'll find package with Samsung drivers etc..make sure you have uninstalled old drivers & rebooted before installing new ones.
Also make sure you have working USB cable etc.
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
The problem is when i connect my phone to pc the phone doesn't show any thing and the pc doesn't show any thing too .
when i connect my hone appears like if he is not connected.
Syrian Eagle said:
The problem is when i connect my phone to pc the phone doesn't show any thing and the pc doesn't show any thing too .
when i connect my hone appears like if he is not connected.
Click to expand...
Click to collapse
Your USB cable must be damaged or your USB port may need cleaning or damaged try these solutions http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
Syrian Eagle said:
Thanks for your help but my problem is when i connect my phone in download mode or regular mode the pc doesn't see my phone and my phone doesn't say any thing (like if he is not connected) i think not a driver issue because previously i connect the phone into ODIN but now after flushing the paranoid ROM this problem appear .
Click to expand...
Click to collapse
If you have come from a GingerBread ROM that would be correct.
ICS/JB ROMS USE DIFFERENT DRIVERS
Now follow the advise and reinstall the samsung drivers and try again.
Lexrsk said:
If you have come from a GingerBread ROM that would be correct.
ICS/JB ROMS USE DIFFERENT DRIVERS
Now follow the advise and reinstall the samsung drivers and try again.
Click to expand...
Click to collapse
Ok How Can I Install the ICS/JB Drivers into my phone :crying::crying::crying::crying:
xsenman said:
Your USB cable must be damaged or your USB port may need cleaning or damaged try these solutions http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
Click to expand...
Click to collapse
Thank you very much but my problem is not resolved because when i connect my phone into the pc my phone and the pc doesn't show any thing like if he is not connected
Turn off the phone, remove battery, wait 1 minute, put the battery back and restart the phone. Then connect the phone to your pc and see if that helped.
Sent from my GT-I9000 using Tapatalk 2
Syrian Eagle said:
Thank you very much but my problem is not resolved because when i connect my phone into the pc my phone and the pc doesn't show any thing like if he is not connected
Click to expand...
Click to collapse
Every possible reason and solutions that I am aware of, for them are mentioned on that link , you have to try and test each one out, including various Drivers, for you to test...
BUT you keep saying there was no Sign of connection, which means the PC does not say anything (like unknown USB Device) or make a sound and your USB icon does not appear on the phone...am I correct???
That simply means there is NO link, which means, its either your USB cable or USB Port is damaged
alexovy said:
Turn off the phone, remove battery, wait 1 minute, put the battery back and restart the phone. Then connect the phone to your pc and see if that helped.
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
Sorry nothing get petter still the problem
I tried a ROM, and i fail, i can't turn on my phone (s5360), i must back my phone to STOCK ROM with Odin, but USB Device Not Recognized, i installed driver, help me
follow the instructions on my thread
http://forum.xda-developers.com/showthread.php?t=2568853
if you have installed the driver correctly using rear usb ports if on a pc and set your phone to download mode correctly there is no reason why odin will not display com then a number in a coloured box under com:id which shows odin is connected and you have android adb device displayed in device manager
thanks your help but it not work
thanks your help but it not work, :crying: i tried kies, it also not work
gemnett said:
thanks your help but it not work, :crying: i tried kies, it also not work
Click to expand...
Click to collapse
you can not use kies to flash or restore firmware on galaxy y - it is not supported and kies is just not needed
if you have installed the usb drivers from the link in my thread (in compatibility mode if on windows 8/8.1) - are using a working usb cable rear usb ports on pc and correct split firmware from my thread it will work
unless you have a faulty usb port/cable it will be due to user error
gemnett said:
thanks your help but it not work, :crying: i tried kies, it also not work
Click to expand...
Click to collapse
Are you boot into download mode already? If not , odin will not recognize your phone anyway
install samsung usb driver first n then connect your phone with download mode by usb
Note:make sure that usb driver is install properly before connect ur phone
.
marcussmith2626 said:
you can not use kies to flash or restore firmware on galaxy y - it is not supported and kies is just not needed
if you have installed the usb drivers from the link in my thread (in compatibility mode if on windows 8/8.1) - are using a working usb cable rear usb ports on pc and correct split firmware from my thread it will work
unless you have a faulty usb port/cable it will be due to user error
Click to expand...
Click to collapse
i did it.. install the usb drivers from the link in your thread(win 8.1), put cable in rear sub port.. but still no working.... i give up
!!
GalKill said:
Are you boot into download mode already? If not , odin will not recognize your phone anyway
Click to expand...
Click to collapse
of course
@@
before that, i installed ROM cm7.2 with Kernel [email protected]#2. but it fail and can't boot. recovery also no
gemnett said:
i did it.. install the usb drivers from the link in your thread(win 8.1), put cable in rear sub port.. but still no working.... i give up
Click to expand...
Click to collapse
did you run the usb driver setup in compatibility mode?
right click the setup file
click properties
click compatibility tab
tick box to run in compatibility
select windows xp (service pack 2 will do)
apply
then run the setup
im using windows 8.1 and no problems with me
marcussmith2626 said:
did you run the usb driver setup in compatibility mode?
right click the setup file
click properties
click compatibility tab
tick box to run in compatibility
select windows xp (service pack 2 will do)
apply
then run the setup
im using windows 8.1 and no problems with me
Click to expand...
Click to collapse
i did, pack 2..but still USB Device Not Recognized, maybe my phone die. hehe. but thank you....
Ah, this is my problem: "This device is disabled because the firmware of the device did not give it the required resources. (Code 29)" :cyclops:
gemnett said:
i did, pack 2..but still USB Device Not Recognized, maybe my phone die. hehe. but thank you....
Ah, this is my problem: "This device is disabled because the firmware of the device did not give it the required resources. (Code 29)" :cyclops:
Click to expand...
Click to collapse
right click the device
click uninstall
restart the pc
then put phone into download mode
connect usb
push vol up on phone to start connection
drivers should then install
Try to use your cable connected from your pc and your phone again. If the same problem happened, try to connect your phone using that cable to another pc. BUT if that phone is not recognized, I think the problem is in the cable. Try to buy another one, and if same thing happened, the problem is in the usb port of your phone.
DiwatangTboom said:
Try to use your cable connected from your pc and your phone again. If the same problem happened, try to connect your phone using that cable to another pc. BUT if that phone is not recognized, I think the problem is in the cable. Try to buy another one, and if same thing happened, the problem is in the usb port of your phone.
Click to expand...
Click to collapse
I think so.. the problem is in the usb port of my phone... so, what i have to do ? replace?
gemnett said:
I think so.. the problem is in the usb port of my phone... so, what i have to do ? replace?
Click to expand...
Click to collapse
Yep.
I've flashed my i9505 many times. I can't remember exactly what I've done, but now the situation is very weird.
1. I can go into Download mode. But Odin doesn't recognise it. Kies doesn't recognise it either. The error message on the bottom right corner of the screen says "USB device not recognized. Your usb device has malfunctioned." I've tried re-install the USB driver, use the original USB cable, even tried it on another PC with no luck. I suspect the very low level USB driver in the phone has corrupted because possibly I flash something wrong in the past.
2. I can go into Recovery mode and flash new ROMs in zip format from there.
3. I can use my phone normally, e.g. make phone call, SMS, WiFi......My computer can recognize my phone as usual when I am in Android.
Any thoughts? Helps are appreciated.
Hello,
Uninstall any previous installed of Samsung USB drivers, clean your Windows registry through CCleaner (not needed but highly suggested) then download and install latest Samsung USB drivers
Now download mode will be recognized on PC
Inviato dal mio GT-I9505
There is an easier way. If you are using windows, go into control panel-> Devices-> Right Click on your phone-> there should be a Driver Details-> Go details I think it is-> Uninstall driver-> Have the box ticked-> Uninstall-> Unplug then replug the cable in and it should work.
Sent from my Nexus 4 using XDA Free mobile app
AntaresOne said:
Hello,
Uninstall any previous installed of Samsung USB drivers, clean your Windows registry through CCleaner (not needed but highly suggested) then download and install latest Samsung USB drivers
Now download mode will be recognized on PC
Inviato dal mio GT-I9505
Click to expand...
Click to collapse
I've tried to re-install the driver. I even tried to connect the phone to another PC where the driver had never been installed before. Nope.... it doesn't work. Actually, I've searched around in Google for long time. The most likely reason is the usb piece of Android code is corrupted. Well, maybe not android, it should be the lower layer of Linux. I previously installed dual boot system follow this link and I screw it up when I tried to upgrade the primary OS:
http://forum.xda-developers.com/showthread.php?t=2447534
procket said:
I've tried to re-install the driver. I even tried to connect the phone to another PC where the driver had never been installed before. Nope.... it doesn't work. Actually, I've searched around in Google for long time. The most likely reason is the usb piece of Android code is corrupted. Well, maybe not android, it should be the lower layer of Linux. I previously installed dual boot system follow this link and I screw it up when I tried to upgrade the primary OS:
http://forum.xda-developers.com/showthread.php?t=2447534
Click to expand...
Click to collapse
You said that in Android USB connection works.
The download mode depends on bootloader, that can't be touched in any way by Android, even you can't touch the bootloader.
It's also write-protected, you can only upgrade it through Odin or through an official OTA update, when flashed you can't downgrade and can't write on its partition if not through JTAG
Inviato dal mio GT-I9505
procket said:
I've flashed my i9505 many times. I can't remember exactly what I've done, but now the situation is very weird.
1. I can go into Download mode. But Odin doesn't recognise it. Kies doesn't recognise it either. The error message on the bottom right corner of the screen says "USB device not recognized. Your usb device has malfunctioned." I've tried re-install the USB driver, use the original USB cable, even tried it on another PC with no luck. I suspect the very low level USB driver in the phone has corrupted because possibly I flash something wrong in the past.
2. I can go into Recovery mode and flash new ROMs in zip format from there.
3. I can use my phone normally, e.g. make phone call, SMS, WiFi......My computer can recognize my phone as usual when I am in Android.
Any thoughts? Helps are appreciated.
Click to expand...
Click to collapse
Hi friend, did you found out how to fix this issue i have the same problem with a I9500 please help
banziitox24 said:
Hi friend, did you found out how to fix this issue i have the same problem with a I9500 please help
Click to expand...
Click to collapse
Sorry mate, I am still stuck in Odin. Since I can flash new ROM via recovery mode and everything else still works, I give up.
procket said:
Sorry mate, I am still stuck in Odin. Since I can flash new ROM via recovery mode and everything else still works, I give up.
Click to expand...
Click to collapse
Dang I have this phone here I can connect it in Odin but in normal mode it doesn't connect and I need it to connect so I can finish the IMEI Repair
change the modes of usb
try *#0808# mtp + adb or others
try *#9090# try all of them
best of luck
I can't update firmware using odin ,it keep saying not recognized ,any other ways can i flash firmware without using usb port? Hope anyone can help me
Did you try on another pc? Test it, maybe your pc is the one with the problem.
you can flash with out pc, sadly there are none rom at the moment to flash trough recovery.
syverman said:
Did you try on another pc? Test it, maybe your pc is the one with the problem.
you can flash with out pc, sadly there are none rom at the moment to flash trough recovery.
Click to expand...
Click to collapse
i have try many cable, computer but its still same. its just charging on the phone and not recognized on pc. im stuck on unofficial miui with a lot of bugs, please give me someways to stock my firmware back without using odin or anything that use usb port because my usb port its just for charging only, not working for odin.
Rith click on computer and click on comlutef propeeties then ect device manager u will use warning icon in the list something name i am forget right click on it u will use option update driver click on it then select specific driver path where your driver are installed then search then Huh Huh xD restert your pc then connect your phone:good:
I think problem is with drivers you need reinstall device drivers, first uninstall ur device drivers from device manager then install samsung usb driver software from here ,now drivers will be installed automatically installed on connecting your phone
Download link is below
http://androidhost.org/XIVsA
Sent from my SM-G530H using XDA Free mobile app
my SM-G530H connected and detected in windows but not on samsung kies
Samsung Galaxy Grand Prime SM-G530/H/DV model (G530HXXU1ANIA)
Hi
I have Samsung Galaxy Grand Prime SM-G530/H/DV model (G530HXXU1ANIA) . I did factory Reset . Then TouchWiz stopped problem arose. I disabled TouchWiz and installed APUS Launcher. That worked fine. Then I want to give cell to another person. I did Factory Reset again. After this the following problems arose.
1- A pop up massage during booting arose. “Unfortunately Process com. Android. systemUI has been stopped”
2- Above mentioned message hang the cell on Main Screen, I can not operate any function.
3- IMEI No. INVALID.
4- Mobile cannot be accepted connection with PC, ODIN, Kies etc.
Kindly guide me in this regard as I am a beginner in the matter of programming etc.
M.Abdul Quddus from Pakistan
+923006021721
Did you get this sorted out and how ? I have a similar problem.
Sent from my SM-G530H using XDA Forums
redfeast said:
I think problem is with drivers you need reinstall device drivers, first uninstall ur device drivers from device manager then install samsung usb driver software from here ,now drivers will be installed automatically installed on connecting your phone
Download link is below
http://androidhost.org/XIVsA
Click to expand...
Click to collapse
I doubt it is a driver issue because I have tried multiple systems and these systems recognize other phones instantly
its the same from my phone sadly i didnt find any firmware for this its a clone i think