Help: PC Odin Does Not Detect Note in Download Mode - Galaxy Note GT-N7000 General

PC Odin does not detect my Note in download mode and I think I may have a problem with the Windows 7 64-bit USB drivers.
When I connect the Note to my PC it automatically tries to install the Note drivers but fails to install MTP (see attached picture).
I've installed the drivers using Kies but that does not help.
I've googled for a solution but cannot find one. Does anyone here know the answer?
Many Thanks

Gaugerer said:
PC Odin does not detect my Note in download mode and I think I may have a problem with the Windows 7 64-bit USB drivers.
When I connect the Note to my PC it automatically tries to install the Note drivers but fails to install MTP (see attached picture).
I've googled for a solution but cannot find one. Does anyone here know the answer?
Many Thanks
Click to expand...
Click to collapse
download kies from samsung for win, install in yr pc, it will install the drivers. of cos u can find and install the drivers separately but in view u post a simple question here, i doubt that will be easy path for you.
Sent from my GT-N7000 using xda premium

lewisteo said:
download kies from samsung for win, install in yr pc, it will install the drivers. of cos u can find and install the drivers separately but in view u post a simple question here, i doubt that will be easy path for you.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Thanks for your reply. I've run Kies which installed the drivers but I still get the error shown in the attached thumbnail. I haven't tried installing the drivers manually because I don't know how to do that.

I've just tried updating Kies and using it to install Windows USB drivers and now I don't get an error when connecting Note to PC (see attached thumbnail) but Odin still cannot see Note in download mode.

Gaugerer said:
I've just tried updating Kies and using it to install Windows USB drivers and now I don't get an error when connecting Note to PC (see attached thumbnail) but Odin still cannot see Note in download mode.
Click to expand...
Click to collapse
Re-install odin or find another version of it.
In case still no luck, then try this tool from Adam Outler:
http://forum.xda-developers.com/showthread.php?t=1257434

forest1971 said:
Re-install odin or find another version of it.
In case still no luck, then try this tool from Adam Outler:
http://forum.xda-developers.com/showthread.php?t=1257434
Click to expand...
Click to collapse
Thanks for your reply. It seems I have two solutions available and that is to try installing my original UK ROM over my German ROM in recovery mode. Or changing the CSC to match the German ROM to see if that helps. What do people think?

Just need to be careful about unsafe ICS kernel which they have warned in the sticky threads.

Also make sure kies isn't running when you try Odin, might be hogging the connection.
Sent from my GT-N7000 using Tapatalk 2

also try to use other usb port.

Thanks for all the replies. I have changed my UK CRC code to Germany ODT to match my XXLPY German ROM and I can now use Kies for updating firmware. But I still cannot get PC Odin to detect my Note and I so will continue to look for a solution for that problem.

I am still investigating why Odin does not detect my Note and one reason often suggested is bad Note drivers. So I connected my Note to the PC and then opened "Devices and Printers" in the Windows control panel where there was a Note icon. I right-clicked on the icon to get the properties and I attach thumbnails of drivers which show the drivers details and say the drivers are working normally.
I'm using 64bit Windows 7 and I would be grateful if someone could compare their drivers information with mine to see if there is any difference.

Since you wrote kies detects your phone, it is related to drivers.
German/Uk firmware/CSC is not the reason.
When I connected my phone in download mode for the first time, my PC and Netbook installed additional drivers automatically (not from windows updates).
As I wrote in your other thread SAMSUNG_USB_Driver_for_Mobile_Phones.exe is all you need to install to get necessary drivers.
Copy it to your desktop and get rid of kies.
Reboot and install SAMSUNG_USB_Driver_for_Mobile_Phones.exe
Reboot again.
It should work fine.

Just a hint - make sure you're using USB1.0/2.0 port. No idea about your port, but for me anything flashing related via USB3.0 always fails.

I have finally managed to flash the UK ROM on my Note and I wanted to change the CSC code from the German one ODT to the UK one but when I try there is only one chice and that is ODT. How can I get a list of choices which includes the UK CSC?

Related

"USB not recognised", Odin download mode problem

Hey. Im brand new to this forum and to Android aswell since i came from Iphone. Yea im a noob and sorry if you notice bad english
So i received my SGS2 some days ago and after researching about root/custom roms and stuff, I decided to start with rootin my SGS2. i download Odin3 1.85 and superoneclick, i also liked litening rom v1.1 and downloaded that too.
So i turn on "USB debugging" and turn off the phone to enter "download mode" and when i try to connect to Odin, nothing shows up. And Windows bar tells me that usb is not recognised. But... flash drive/transferring files and connecting to Kies works just fine. Please help me, ive been sitting over 24 hours with this issue and ive restarted/uninstalled installed pretty much everything over and over again (kies/drivers/device) not windows though. Why wont Windows/odin recognise it in download mode???
And if possible, is there a way around to install litening rom??
Thats weird man....very very unlikely to happen...
Just tell us step by step with screen shots if possible then it becomes very easy for us to find where u r doing it wrong...ok ?
Turn off USB debugging .
reboot phone and PC .
jje
While being in download mode on the phone, the pc/odin is not recognising anything
but everything works fine and recognises when i transfer files or use Kies
/tried uploading screenshots but the forum wudnt allow it since im a noob lol)
[email protected]
Thanks for reply but ive done that several times now
Adnanish said:
While being in download mode on the phone, the pc/odin is not recognising anything
but everything works fine and recognises when i transfer files or use Kies
/tried uploading screenshots but the forum wudnt allow it since im a noob lol)
[email protected]
Thanks for reply but ive done that several times now
Click to expand...
Click to collapse
This is driver issue.Try to find on kies an option to install the drivers again(i am not in front of my pc).Of course phone on and untick usb debugging
Sent from my GT-I9100 using Tapatalk
This is a driver problem. The Gadget Driver fails to get installed properly.
Make sure Windows Update are set to automatically find drivers for your devices.
I myself faced this problem. To rectify it I'd to try the same thing on a different machine and it worked flawlessly there.
The problem you're facing is that the Service Mode drivers are not getting installed, hence Odin is unable to recognize it.
Other possible fixes include, trying on different USB Ports, downloading Samsung PC Studio.
Thx for the replies everyone. Yea i figured its a driver issue, ill try the suggested actions incl samsung pc studio installing, and if its still not working i guess my last resort is using another pc or reinstalling windows on my own pc
In kies, i think in the tools menu, there is a install drivers option. This will fix the problem im sure. Not sure about pc studio having the same.
Sent from my GT-I9100 using XDA Premium App
fyi, i reinstalled windows and updated everything and the driver connection issue is solved now. I should have done this from the beginning instead of freaking out for several midnight hours lol thx for the help everyone, hopefully the rooting and flashing process should happen painless now
if anyone has this problem too,
i had the same problem and for me closing kies helped.
mfg Solidus

phone seems bricked

hi my mate has and s4 9505 and he wiped the hole phone like a noob and it wont enter recovery and in odin nothing will flash tried pit file and also stockrom it either gets stuck on setting up connection or stuck on pit mapping part tried adb devices command but its not picking up the devices the drivers will be on his comp as he has all ready flashed things via odin before on the s4 any ideas people cheers
strikerdj2011 said:
hi my mate has and s4 9505 and he wiped the hole phone like a noob and it wont enter recovery and in odin nothing will flash tried pit file and also stockrom it either gets stuck on setting up connection or stuck on pit mapping part tried adb devices command but its not picking up the devices the drivers will be on his comp as he has all ready flashed things via odin before on the s4 any ideas people cheers
Click to expand...
Click to collapse
Try that:
You can use this software to repair Your dead Samsung i9505 and similar (m919, i337, L720 etc)
Note, You need to install QHUSB Qualcomm drivers first.
After flashing with this software, You need to flash phone with official firmware and PIT file, otherwise phone will be dead again, and You'll need to repeat the process.
If You get errors reported by this software (command prompt window), You'll have to replace the eMMC chip first.​
Click to expand...
Click to collapse
Warning ..I never tried that..
source​
Please report back if that worked for you.
Thank's
ausdim said:
Try that:
Warning ..I never tried that..
source​
Please report back if that worked for you.
Thank's
Click to expand...
Click to collapse
thanks will try this
I'm in this exact same position. Can you please post back with your results as to how it goes.
Thanks
EDIT - I simply changed USB ports and it worked fine!
oblique1 said:
I'm in this exact same position. Can you please post back with your results as to how it goes.
Thanks
EDIT - I simply changed USB ports and it worked fine!
Click to expand...
Click to collapse
no such luck for us and that the other thing didnt work either :/
Did you install the drivers for the phone?
Did u put phone in download mode and flash with odin?
If so, trying closing all kies process, changing usb port and run odin with admin. Flash pit file and stock firmware.
lzk123 said:
Did you install the drivers for the phone?
Did u put phone in download mode and flash with odin?
If so, trying closing all kies process, changing usb port and run odin with admin. Flash pit file and stock firmware.
Click to expand...
Click to collapse
yea drivers are installed and yea vol down power and home in to download mode we uninstalled kies and installed drivers on own same thing then we re installed kies and same thing tried the 4 usb ports on him comp and when a flash pit or stock rom odin doesn't go past setting up connection
ran the adb command adb devices and it just doesn't seem to be picking up his device
strikerdj2011 said:
yea drivers are installed and yea vol down power and home in to download mode we uninstalled kies and installed drivers on own same thing then we re installed kies and same thing tried the 4 usb ports on him comp and when a flash pit or stock rom odin doesn't go past setting up connection
ran the adb command adb devices and it just doesn't seem to be picking up his device
Click to expand...
Click to collapse
Did u restart the com after reinstalling kies? Try restart computer now and flash.
yea every time a install something and uninstall some thing allways reboot the comp
strikerdj2011 said:
yea every time a install something and uninstall some thing allways reboot the comp
Click to expand...
Click to collapse
What error shows up when u flash stock rom and pit again?
it just stays on setting up connection on odin thats it doesn't go any more past that point
strikerdj2011 said:
it just stays on setting up connection on odin thats it doesn't go any more past that point
Click to expand...
Click to collapse
What odin version are u using? Are u sure you have properly installed kies or drivers? The latest kies version? Try disabling antivirus and installing latest kies.
tried with odin 1.85 3.04 and 3.07 and yea latest kies i uninstalled antivirus to be on safe side as i no it can conflict with odin and stuff
The problems you are having are purely driver issues. Try flashing the phone on another computer.
robogo1982 said:
The problems you are having are purely driver issues. Try flashing the phone on another computer.
Click to expand...
Click to collapse
ok thanks will try it on mine 2 moz cheers
Let us know if it worked
Try a different data cable it worked for me
Sent from my GT-I9505 using xda premium
Well I've had some problems too today and there a couple of things you might want to try (I'm sure one of them will fix it):
- Pick a different USB port (preferably one in the back)
- Try a different USB cable (I used one from my Nexus 7, didn't work. Tried with the original S4 cable, worked)
- Uninstall Kies and the Samsung drivers from you control panel -> programs
- Download the Samsung USB Drivers again (google it) (do not install them yet)
- Download and install USB Deview (google it) and delete every driver of Samsung you come across in the list (just right click and click delete)
- Disable your internet access and reboot
- After rebooting install the Samsung Drivers (without an internet connection)
- Plug in your phone after you've installed the drivers and enable USB Debugging
- Reboot
- Enable your internet connection again
- Try to flash again in Odin (it should work now)
If this won't work, I don't know what will. A different USB port, cable, fresh/original drivers (not the ones Windows Update may try to install for you), etc is probably what you'll need to get it working.
thanks for every ones help we installed a fresh copy of windows 7 and installed every thing again and it worked fine defo must of been driver related :laugh:
Cheers now flash away like there's no tomorrow

[Q] USB device not recognized

I've flashed my i9505 many times. I can't remember exactly what I've done, but now the situation is very weird.
1. I can go into Download mode. But Odin doesn't recognise it. Kies doesn't recognise it either. The error message on the bottom right corner of the screen says "USB device not recognized. Your usb device has malfunctioned." I've tried re-install the USB driver, use the original USB cable, even tried it on another PC with no luck. I suspect the very low level USB driver in the phone has corrupted because possibly I flash something wrong in the past.
2. I can go into Recovery mode and flash new ROMs in zip format from there.
3. I can use my phone normally, e.g. make phone call, SMS, WiFi......My computer can recognize my phone as usual when I am in Android.
Any thoughts? Helps are appreciated.
Hello,
Uninstall any previous installed of Samsung USB drivers, clean your Windows registry through CCleaner (not needed but highly suggested) then download and install latest Samsung USB drivers
Now download mode will be recognized on PC
Inviato dal mio GT-I9505
There is an easier way. If you are using windows, go into control panel-> Devices-> Right Click on your phone-> there should be a Driver Details-> Go details I think it is-> Uninstall driver-> Have the box ticked-> Uninstall-> Unplug then replug the cable in and it should work.
Sent from my Nexus 4 using XDA Free mobile app
AntaresOne said:
Hello,
Uninstall any previous installed of Samsung USB drivers, clean your Windows registry through CCleaner (not needed but highly suggested) then download and install latest Samsung USB drivers
Now download mode will be recognized on PC
Inviato dal mio GT-I9505
Click to expand...
Click to collapse
I've tried to re-install the driver. I even tried to connect the phone to another PC where the driver had never been installed before. Nope.... it doesn't work. Actually, I've searched around in Google for long time. The most likely reason is the usb piece of Android code is corrupted. Well, maybe not android, it should be the lower layer of Linux. I previously installed dual boot system follow this link and I screw it up when I tried to upgrade the primary OS:
http://forum.xda-developers.com/showthread.php?t=2447534
procket said:
I've tried to re-install the driver. I even tried to connect the phone to another PC where the driver had never been installed before. Nope.... it doesn't work. Actually, I've searched around in Google for long time. The most likely reason is the usb piece of Android code is corrupted. Well, maybe not android, it should be the lower layer of Linux. I previously installed dual boot system follow this link and I screw it up when I tried to upgrade the primary OS:
http://forum.xda-developers.com/showthread.php?t=2447534
Click to expand...
Click to collapse
You said that in Android USB connection works.
The download mode depends on bootloader, that can't be touched in any way by Android, even you can't touch the bootloader.
It's also write-protected, you can only upgrade it through Odin or through an official OTA update, when flashed you can't downgrade and can't write on its partition if not through JTAG
Inviato dal mio GT-I9505
procket said:
I've flashed my i9505 many times. I can't remember exactly what I've done, but now the situation is very weird.
1. I can go into Download mode. But Odin doesn't recognise it. Kies doesn't recognise it either. The error message on the bottom right corner of the screen says "USB device not recognized. Your usb device has malfunctioned." I've tried re-install the USB driver, use the original USB cable, even tried it on another PC with no luck. I suspect the very low level USB driver in the phone has corrupted because possibly I flash something wrong in the past.
2. I can go into Recovery mode and flash new ROMs in zip format from there.
3. I can use my phone normally, e.g. make phone call, SMS, WiFi......My computer can recognize my phone as usual when I am in Android.
Any thoughts? Helps are appreciated.
Click to expand...
Click to collapse
Hi friend, did you found out how to fix this issue i have the same problem with a I9500 please help
banziitox24 said:
Hi friend, did you found out how to fix this issue i have the same problem with a I9500 please help
Click to expand...
Click to collapse
Sorry mate, I am still stuck in Odin. Since I can flash new ROM via recovery mode and everything else still works, I give up.
procket said:
Sorry mate, I am still stuck in Odin. Since I can flash new ROM via recovery mode and everything else still works, I give up.
Click to expand...
Click to collapse
Dang I have this phone here I can connect it in Odin but in normal mode it doesn't connect and I need it to connect so I can finish the IMEI Repair
change the modes of usb
try *#0808# mtp + adb or others
try *#9090# try all of them
best of luck

Galaxy Note 10.1 Won't connect to Kies

Has anyone else had this problem. I was wanting to update software but my computer wont recognize the tablet. Kies just sits and spins.
I even tried restoring tablet to factory default and uninstalled reinstalled kies. Anyone? Thanks!
Try a different USB port.
Are the android device drivers installed in your computer?
From Dante's Inferno via XDA Premium HD
same proble............device drivers installed, but not found.
Temetka said:
Try a different USB port.
Are the android device drivers installed in your computer?
From Dante's Inferno via XDA Premium HD
Click to expand...
Click to collapse
same proble............device drivers installed, but not found.
Running Windows 7 Premium.
Do you use the right version of Kies? There are two!
NateDiggityDoggg said:
Has anyone else had this problem. I was wanting to update software but my computer wont recognize the tablet. Kies just sits and spins.
I even tried restoring tablet to factory default and uninstalled reinstalled kies. Anyone? Thanks!
Click to expand...
Click to collapse
Try diffrend data cable. I had exactly the same problem.
Sent from my GT-N8013 using XDA Premium HD app
unknown device............
mangurian said:
same proble............device drivers installed, but not found.
Running Windows 7 Premium.
Click to expand...
Click to collapse
when I plug the 8013 into a USB port I get an unknown device error.
I tried to update the driver (pointing to the SAMSUNG driver I installed) and I get a correct driver already installed message.
damn !
mangurian said:
when I plug the 8013 into a USB port I get an unknown device error.
I tried to update the driver (pointing to the SAMSUNG driver I installed) and I get a correct driver already installed message.
damn !
Click to expand...
Click to collapse
ok here we go again.
THIS Has been repeated over and over.
WITH Tablet plugged in go into device manger . click on the device with the yellow mark and uninstall it .Be sure to tick the check box to uninstall drivers if you have the option
unplug table and reboot.
Uninstall Kies and reboot computer ..
DO NOT CONNECT THE TABLET BACK TO COMPUTER..
Do google search for and install usbdview..
Just unzip it and run it
usbview.. open it and REMOVE ALL USB Adapters
RE DOWNLOAD KIES 2.6 I THINK THE OLDER Version for 4.1 android . new VERSION will not work
Run kies and let it update
Exit kies
Reboot computer
Run kies and let it check and d/load updates again if it needs to.
Plug in your TABLET .
If you Still have ISSUES. then you need to add at after running usbview Follow the procedure for installing un certified drivers for windows 7 . Search the internet for exact instructions for your machine. Only applies to uufi bios.
Good Luck . The above procedure works for any Driver install issue for Windows and has worked for years.... OF Course if there is no other problems . The issue is windows registeries for usb devices do NOT EVER Get purged .
Erica Renee
Kudos to Bonnie
Followed instructions and managed to connect 8013. Unfortunately, the rumors that there was an update to KIT KAT available were the result of
a misunderstanding. Still nice to know I can connect via KIES if need be.
The process is a bit scarey. I had some problems getting my bluetooth mouse back and my USB DAC audio.
Thanks again.
erica_renee said:
ok here we go again.
THIS Has been repeated over and over.
WITH Tablet plugged in go into device manger . click on the device with the yellow mark and uninstall it .Be sure to tick the check box to uninstall drivers if you have the option
unplug table and reboot.
Uninstall Kies and reboot computer ..
DO NOT CONNECT THE TABLET BACK TO COMPUTER..
Do google search for and install usbdview..
Just unzip it and run it
usbview.. open it and REMOVE ALL USB Adapters
RE DOWNLOAD KIES 2.6 I THINK THE OLDER Version for 4.1 android . new VERSION will not work
Run kies and let it update
Exit kies
Reboot computer
Run kies and let it check and d/load updates again if it needs to.
Plug in your TABLET .
If you Still have ISSUES. then you need to add at after running usbview Follow the procedure for installing un certified drivers for windows 7 . Search the internet for exact instructions for your machine. Only applies to uufi bios.
Good Luck . The above procedure works for any Driver install issue for Windows and has worked for years.... OF Course if there is no other problems . The issue is windows registeries for usb devices do NOT EVER Get purged .
Erica Renee
Click to expand...
Click to collapse
mangurian said:
Followed instructions and managed to connect 8013. Unfortunately, the rumors that there was an update to KIT KAT available were the result of
a misunderstanding. Still nice to know I can connect via KIES if need be.
The process is a bit scarey. I had some problems getting my bluetooth mouse back and my USB DAC audio.
Thanks again.
Click to expand...
Click to collapse
I might should have mentioned that sometimes after usbdview you could have to re install other usb devices.Its rare.. If you know exactly what your dac uses you can always NOT Uninstall it. But if you go that route and the instructions fail. your not really trouble shooting without taking all usb devices out .. As far as the bluetooth.. i am guessing you have a usb bluetooth dongle? or internal bluetooth to usb of some kind..
Glad its working for you now.. my Instructions are not always well written. I just know in my head how to do things. not so great at explaining.. OH My windows training was Direct from Microsoft online
just try to connect your note to usb port that behind of your CPU

[Q] Help ! my sm-g530h usb not recognized

I can't update firmware using odin ,it keep saying not recognized ,any other ways can i flash firmware without using usb port? Hope anyone can help me
Did you try on another pc? Test it, maybe your pc is the one with the problem.
you can flash with out pc, sadly there are none rom at the moment to flash trough recovery.
syverman said:
Did you try on another pc? Test it, maybe your pc is the one with the problem.
you can flash with out pc, sadly there are none rom at the moment to flash trough recovery.
Click to expand...
Click to collapse
i have try many cable, computer but its still same. its just charging on the phone and not recognized on pc. im stuck on unofficial miui with a lot of bugs, please give me someways to stock my firmware back without using odin or anything that use usb port because my usb port its just for charging only, not working for odin.
Rith click on computer and click on comlutef propeeties then ect device manager u will use warning icon in the list something name i am forget right click on it u will use option update driver click on it then select specific driver path where your driver are installed then search then Huh Huh xD restert your pc then connect your phone:good:
I think problem is with drivers you need reinstall device drivers, first uninstall ur device drivers from device manager then install samsung usb driver software from here ,now drivers will be installed automatically installed on connecting your phone
Download link is below
http://androidhost.org/XIVsA
Sent from my SM-G530H using XDA Free mobile app
my SM-G530H connected and detected in windows but not on samsung kies
Samsung Galaxy Grand Prime SM-G530/H/DV model (G530HXXU1ANIA)
Hi
I have Samsung Galaxy Grand Prime SM-G530/H/DV model (G530HXXU1ANIA) . I did factory Reset . Then TouchWiz stopped problem arose. I disabled TouchWiz and installed APUS Launcher. That worked fine. Then I want to give cell to another person. I did Factory Reset again. After this the following problems arose.
1- A pop up massage during booting arose. “Unfortunately Process com. Android. systemUI has been stopped”
2- Above mentioned message hang the cell on Main Screen, I can not operate any function.
3- IMEI No. INVALID.
4- Mobile cannot be accepted connection with PC, ODIN, Kies etc.
Kindly guide me in this regard as I am a beginner in the matter of programming etc.
M.Abdul Quddus from Pakistan
+923006021721
Did you get this sorted out and how ? I have a similar problem.
Sent from my SM-G530H using XDA Forums
redfeast said:
I think problem is with drivers you need reinstall device drivers, first uninstall ur device drivers from device manager then install samsung usb driver software from here ,now drivers will be installed automatically installed on connecting your phone
Download link is below
http://androidhost.org/XIVsA
Click to expand...
Click to collapse
I doubt it is a driver issue because I have tried multiple systems and these systems recognize other phones instantly
its the same from my phone sadly i didnt find any firmware for this its a clone i think

Categories

Resources