I tried to download via lg tools and flash something and failed.
when you restart the phone gave me the black screen.
I run ubuntu from the procedure
http://forum.xda-developers.com/showthread.php?t=2582142
after trying this procedure, the phone remains fixed on the lg logo.
How can I fix ??? I pray you are in a panic ...
the computer does not recognize the phone more
:crying::crying::crying::crying::crying:
What phone model do you have? Sounds like you might have to boot into download mode and use the LG tool to go back to stock completely.
greyhd said:
What phone model do you have? Sounds like you might have to boot into download mode and use the LG tool to go back to stock completely.
Click to expand...
Click to collapse
I have a d802
the phone is stuck on the lg logo.
As per the procedure would have to start the recovery but will not start.
Not part of the download mode.
I can get into factory reset but the pc does not recognize.
It seems to me a serious case. The guarantee how it behaves in these cases?
Dont you have recovery to flash new rom via ADB?
Try with ubuntu once again it will work out
ubuntu does not recognize the phone more.
The recovery is the original one.
Make sure the ports on the pc are set to 41. Do you have the drivers in the pc as well?
Sent from my VS980 4G using Tapatalk
Lg g2 D802 32GB
Got my phone bricked once when trying to install lollipop rom.
After successfuly restoring it and getting the 16GB error and fixing it I restored to stock 4.2.2 and in recovery accidently installed the KK bootloader and rebooted instead of installing the rom.
No download mode.
No recovery.
First phone booted and then the screen turned off and was only sounds (Booting in, connecting to pc, etc.)
Now nothing.
the only thing I managed to enter is the Hard button mode....
I tried every forum,thread,files,method mentioned exept the "Open the phone to pieces and tinker with it" method mentioned here somewhere.
If there is some hope for me before going to a repair shop and hopefully someone there smarter than me and can actually fix it... would really appreceate every advice you might have on the matter.
Thank you.
I here by declare the LG g2 D802 32GB UNbrickable
What I did to fix it.
Some of it I dont understand...
My specs:
Windows 8.1 64 bit
Ubuntu 64bit on Vmware
lg g2 drivers(mixed, I had pdanet drivers, adb drivers so not sure which)
What i did:
1- adb devices on windows
Seen what I have in the picture
adb reboot recovery/bootloader/reboot/fastboot
Until I saw some writings and phone entered this state:
http://forum.xda-developers.com/showthread.php?t=2582142
Using this files:
(because its a 32GB variant) in ubuntu I did the instructions
http://www.mediafire.com/download/3qyac22qat2aucj/D802_20B32GB.zip
then unplugged phone
Fully power off
Hold volume up button
DOWNLOAD MODE.
And from there its all history....
Hope it helps someone here
Briked my lg g2 d802
first bricked attempt phone get into fastboot after flashing laf.img recovery.img it back into lg logo.... ill try flashing kdz phone stuck on lg logo cant boot further and try same method on flashing tot got same result m all stuck on lg logo not going further no recovery mode only stuck at lg logo and download mode.. please help trying since two day
Acolis said:
Lg g2 D802 32GB
Got my phone bricked once when trying to install lollipop rom.
After successfuly restoring it and getting the 16GB error and fixing it I restored to stock 4.2.2 and in recovery accidently installed the KK bootloader and rebooted instead of installing the rom.
No download mode.
No recovery.
First phone booted and then the screen turned off and was only sounds (Booting in, connecting to pc, etc.)
Now nothing.
the only thing I managed to enter is the Hard button mode....
I tried every forum,thread,files,method mentioned exept the "Open the phone to pieces and tinker with it" method mentioned here somewhere.
If there is some hope for me before going to a repair shop and hopefully someone there smarter than me and can actually fix it... would really appreceate every advice you might have on the matter.
Thank you.
I here by declare the LG g2 D802 32GB UNbrickable
What I did to fix it.
Some of it I dont understand...
My specs:
Windows 8.1 64 bit
Ubuntu 64bit on Vmware
lg g2 drivers(mixed, I had pdanet drivers, adb drivers so not sure which)
What i did:
1- adb devices on windows
Seen what I have in the picture
adb reboot recovery/bootloader/reboot/fastboot
Until I saw some writings and phone entered this state:
http://forum.xda-developers.com/showthread.php?t=2582142
Using this files:
(because its a 32GB variant) in ubuntu I did the instructions
http://www.mediafire.com/download/3qyac22qat2aucj/D802_20B32GB.zip
then unplugged phone
Fully power off
Hold volume up button
DOWNLOAD MODE.
And from there its all history....
Hope it helps someone here
Click to expand...
Click to collapse
How did you get to adb?, i have a bricked device that shows only QHSUS_BULK without drivers
Faddy132 said:
first bricked attempt phone get into fastboot after flashing laf.img recovery.img it back into lg logo.... ill try flashing kdz phone stuck on lg logo cant boot further and try same method on flashing tot got same result m all stuck on lg logo not going further no recovery mode only stuck at lg logo and download mode.. please help trying since two day
Click to expand...
Click to collapse
Stay calm buddy, LG G2 is unbrickable, I had the same problem, I thought that I have bricked it, but fix was simple, I had only download mode, but KDZ restore stucked, what I did was just wait some time, cause LG flash tool has some problems with loading files, it just takes some time, so load it from your folder(kdz) , then wait some time and after that just start it, then you have to be patient cause it takes some time, I experienced some errors too, so just dont unplug it and wait, relax, it works
I have D802 32gb czech version
I flashed v30a Italy version and it works
just flash the right version
MosesTheTool said:
How did you get to adb?, i have a bricked device that shows only QHSUS_BULK without drivers
Click to expand...
Click to collapse
does the phone being recognized in windows when you start adb and using adb devices command?
you can use this to install ADB and run it from CMD in windows:
http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
Acolis said:
does the phone being recognized in windows when you start adb and using adb devices command?
you can use this to install ADB and run it from CMD in windows:
http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
Click to expand...
Click to collapse
No it doesn't, i have ADB, i know how to use it, i already saved one D800 that was in Fastboot.
Problem is, i used the debrick method, i succeeded, but now the device is recognized as LG but the screen stays black. It's acting a bit weird, it flashes with LG FLASH TOOL, although i believe it's not even in Download mode, but the screen keeps staying black.
Stuck at logo
janmynar said:
Stay calm buddy, LG G2 is unbrickable, I had the same problem, I thought that I have bricked it, but fix was simple, I had only download mode, but KDZ restore stucked, what I did was just wait some time, cause LG flash tool has some problems with loading files, it just takes some time, so load it from your folder(kdz) , then wait some time and after that just start it, then you have to be patient cause it takes some time, I experienced some errors too, so just dont unplug it and wait, relax, it works
I have D802 32gb czech version
I flashed v30a Italy version and it works
just flash the right version
Click to expand...
Click to collapse
still stuck at logo flashing same version kdz twice and thrice result is same.. i think i jz RIP my phone.. I have lg g2 D802 international variant if you have any other solution to wake my phone so tell me bro.. its makes me so frustrated..
Help please this is what happened I am new to this !! So I have a lg g2 d8003 in Canada it was on 4.4.2 Kk I rooted the phone auto rec v2 twrp recovery installed and flashed the cloudy 3.3 rom.
I was having service issues on cloudy so i wanted to flash back my restore I made with twrp, before I flashed my restore I flashed ( KK_d8003_bootloader.zip) ?? and then flashed my restore
Now me phone just restarts to the Lg logo And says in white (890 source booting error) (940 cause boot certification verify)
Then the screen turns black (The phone is still on)
Next I try to boot into recovery and that does not work it boots into Factory Reset
(If I go though the steps it does not bring me to twrp power bottom three times)
Next I try to boot into download mode and I can boot into download mode THE PHONE SAYS firmware update and and the bottom it says USER B26 and in red it says ROOTED
But on my PC Windows XP Device Manager it says LGE AndroidNet USB Serial Port (COM4)
In with ! In yellow
The phone does not read with Lg flash tool it just crashes the program
LgMonile Support Tool reads my phone it seems and tells me the County Setting: United States, Software Version: D803R20F
Your device has the latest software available from LG Mobile Support Tool
It will not let me install any USB Drivers My phone is not listed under the USB INSTALL
(BEFORE THIS BRICK HAPPENED I HAD FULL USE OFF MY PHONE VIA USB ON MY WINDOWS XP PC
I AM STUCK I DONT NO WHAT TO DO NOW IF SOMEONE CAN PLEASE TAKE THE TIME TO HELP ME
Thank you all very much
Are you using the kdz or tot? If one fails use the other and see if it works. For the Tot method go by on device manager and change the port from 4 to 41 otherwise it will not detect your device
Sent from my LG-D800 using Tapatalk
xmayhemreturnsx said:
Are you using the kdz or tot? If one fails use the other and see if it works. For the Tot method go by on device manager and change the port from 4 to 41 otherwise it will not detect your device
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
Hello I was using KDZ I don't no how to use the toto can you send me a link on how to I am very new and I am lost in this at the moment
iclone said:
Hello I was using KDZ I don't no how to use the toto can you send me a link on how to I am very new and I am lost in this at the moment
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=45293512
Sent from my LG-D800 using Tapatalk
i need help after d802 update to lollipop touch not working
when i open phone and check on board show D800 i
flash D800 Firmware and repair Partitions by testpoint method
Partition repair successfully now i power on phone its blink on LG and Screen Blank show
if i connect phone in download mode then screen Show i flash D800 Firmware but screen not show
i need solution how solve problem screen show download mode not normal condition
imeicodes said:
i need help after d802 update to lollipop touch not working
when i open phone and check on board show D800 i
flash D800 Firmware and repair Partitions by testpoint method
Partition repair successfully now i power on phone its blink on LG and Screen Blank show
if i connect phone in download mode then screen Show i flash D800 Firmware but screen not show
i need solution how solve problem screen show download mode not normal condition
Click to expand...
Click to collapse
will doing this way help.?
http://forum.xda-developers.com/showpost.php?p=65643825&postcount=4
raptorddd said:
will doing this way help.?
http://forum.xda-developers.com/showpost.php?p=65643825&postcount=4
Click to expand...
Click to collapse
Dear thanks for reply
but my phone not show display on normal condition i flash tot
Download mode show perfectly that all Problem Come after unbrick by using D800 Files
imeicodes said:
Dear thanks for reply
but my phone not show display on normal condition i flash tot
Download mode show perfectly that all Problem Come after unbrick by using D800 Files
Click to expand...
Click to collapse
so you get download mode screen okey... then flash is okey... but booting into system gives you blank screen..
you check motherboard variant? no other part.. i dont know .. but why not ask in the back to stock thread by hyelton..
Board D800 .. i flashed stock firmware but same condition there is any other solution ??/
imeicodes said:
Board D800 .. i flashed stock firmware but same condition there is any other solution ??/
Click to expand...
Click to collapse
i dont know what could be.. try posting this either in the FAQ thread, or in the general section go back to stock thread. you might get helpr there..
by i mistack i used a d802 patch on the ls980 and now i cant get into the recovery mode and only the lg logo is shown also my pc did not recognize it and when i tried to flash a d802 rom it said ok but when i turn it off and open nothing happend exept the lg logo
Najeeb Subay said:
by i mistack i used a d802 patch on the ls980 and now i cant get into the recovery mode and only the lg logo is shown also my pc did not recognize it and when i tried to flash a d802 rom it said ok but when i turn it off and open nothing happend exept the lg logo
Click to expand...
Click to collapse
did you tried download mode and try go back to stokc?